Modification Assistance ON Mode ?? Help !!

Hello friends,
              I have switched off the Modification Assistant for my program, se38>Edit>Modification operation-->switch off the assistance.
I havn't made any changes in code.Now i want to switch ON the Modification
assistance,thus making source code again in amsked mode so as to keep proper
version management.
I have looked for such option but was not able to find .
Kindly help me to sort this problem.
Regards
Jase

Once you tansport the changes of the object and Try aftet that i think it will be switched on automatically...

Similar Messages

  • How to change the code w/o modification assistant

    We have a scenario, where in we developed our programs on Projekt-test system.
    Now that the development is done, all the requests were migrated to actual Projekt system through transport of copies.
    Now when i try to change the code in actual projekt system's development system i cannot change it without modification assistant.
    I heard there is some Program and when we run it it changes the source system of the object to the current system on which it is running / some configurations.
    Please help asap. As it is very difficult to fix bugs using modification assistant.
    Thanks and Regards.

    as soon as you go to the change mode.
    there in menu you can find edit->modification operations->switch of assistant.

  • SPAU issues with: Without Modification Assistant: No versions found

    Hi,
    We have upgraded from SAP 4.7 to SAP ECC 6 with Unicode.
    After the upgradation we have started working with SPAU objects.
    Currently I am working on SPAU: Without Modification Assistant.
    I have gone though some docs in those they have asked to compare the versions using Version Management options.
    But when I am tiring to check the Version Management for many of the objects I am getting the message: No versions found
    Some of the objects are for which I am getting the message No versions found are as follows :
    Selection Views :     SAPBRFSTANDARD                 100789       23.12.2010 ABCK900506
    Programs :RM06BF00                       Collective Release of Purchase Requisitions
    Transactions          FEBA                 A_1234     13.07.2006 XYZK906487           Postprocess Electronic Bank Statmt
    Transaction Variants          O4_TIGER1                      D_ABCD      18.06.2005 AB5K901250
    Screen Variants           O4_TIGER1_0999                 D_ABC      18.06.2005 AB5K901250
    Message Classes    38                   General Basis: ABAP Runtime Environment
    Maintenance and Transport Objects          J_1IEWT_ACKNS                  D_ABCDE 27.06.2008 ABC3910542
    Request you to check and let us know how to proceed.
    Thanks and Regards,
    Prem.
    <personal information removed by moderator>
    Edited by: Thomas Zloch on Jan 18, 2011 12:43 PM

    Hi,
    in SPAU you will be getting three things..
    1>Green light 2>yellow light and 3>Red light
    when the upgrade takes place if you see any object under Green that means the changes are automatically carried to the new version from older version
    for yellow it has done partially and for red you need to do manually copying the code to the new version.
    You have an option is "RESET to original" if you do this , the code will be reset to what SAP provided in the new version. Your old code won't be there.
    Please go through the below link to understand about SPAU and SPDD.
    http://help.sap.com/saphelp_nw04s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
    Regards,
    Nagaraj

  • With and without modification assistant

    when we do upgrade and in teh upgraded version we can find some objects under modification assistant and some under without modidfication assistant when we run the tcode SPAU..as an abaper what is that we have to do with those objects..Could any one let me know the steps that  i have to do with those objects??

    check.. may be useful...
    We have received many errors and it was really pain to go thruogh each and every error....top of that APO is not giving you vary specific error or some times there are no verbitze for the error..
    Follow the steps below will help you lot
    Extract the time series to an Info cube before the upgrade
    Upgrade the system
    De-initialie and Reinitialize the DP/SNP Planning area
    Reload the Time series following the upgrade
    Adjust the Like profiles
    If Old like profile to be used then must assign the planning area to every like profile
    If Existing LIKE profile cannot be assigned to several planning area, You must create the LIKE profile for second planning area manuallt with new name
    Adjust the Phase-In/Out profile
    If Existing Phase-In/Out profile cannot be assigned to several planning area, You must create the Phase-In/Out profile for second planning area manuallt with new name
    Adjust the assignment table ( /SAPAPO/FCST_LC was replaced by /SAPAPO/FCST_LC1)
    Activate all Infocubes by executing the RSDG_CUBE_ACTIVATE report
    Check/Adjust the palnning area Data source
    Convert the Note Anchor tables - Execute /SAPAPO/TS_NOTES_CONVERT_40 Report
    If inconsistence - execute /SAPAPO/TS_GEN_DOCTAB_CHECK report
    Check the converted notes for interactive planning
    You must create the DB tables for the planning object structure/planning area - using taransction /SAPAPO/RLGCOPY
    Realignment and copying steps must be stored in new DB tables
    Adjust planning object ID with /SAPAPO/TS_D_OBJECTS_COPY

  • Switch on modification assistant -- Very urgent

    Hi,
    How to switch on modification assistant?
    I'm facing a problem in a standard include....modification assistant is not appearing
    Regards
    Jiku

    Jiku,
    See the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18d1de6e11d195460000e82de14a/frameset.htm
    To modfy the std programs SAP has provided the Modification assistant to clearly indicate the modification process(like Insert/delete with numbers).
    Once you switched off it, you can't make it switch on .
    once it gives the complete code accessable(SWITCH OFF), then it won't make it to ON again.
    Courtesy-AnjiReddy.
    K.Kiran.
    Message was edited by:
            Kiran K

  • Adjustment using SPAU for Objects Without Modification Assistant

    Hi
       How to adjust Objects under Without Modification Assistant.
    For example if there is an issue with custom program or BAPI, do I have to manually edit them and adjust to old version.
    Cheers
    Senthil

    Hi,
    Tcode SPAU is for adjusting programs and Function Modules.
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66617d9011d396b60000e82de14a/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
    SPAU - for repository Objects Changes
    see the doc
    SPAU
    http://www.sap-img.com/bc018.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/068d380be34e6ce10000009b38f842/content.htm
    http://help.sap.com/saphelp_46c/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/content.htm
    Please find below, answers to your questions:
    1.What objects will come in SPAU and SPDD?
    Ans: All the objects which are modified, after tansporting to the current system,
    will be listed in SPAU and SPDD. SPDD contains the list of all modified Data Dictionary objects, like tables, dataelements, domains,view...etc. The rest of all the modified repository objects will be listed in SPAU.
    What happens to the modifications done in the older version when we upgrade the version? (with Modification assistant and w/o)
    Ans: After the initial upgrade happens, we have to do adjustments from SPAU/SPDD to maintain or reset the changes. That is, from the list of objects in SPAU/SPDD, you have to either carry forward the changes to the new version, by choosing the option ADOPT CHANGES (available on right click) or RESET TO ORIGINAL (available on right click).
    Will they come in these transactions?
    Ans: yes, they will be listed in these transactions, after the BASIS updgrade activity.
    And what if we apply some patches(Notes) to the system? What is the impact of these patches to the SPAU transaction?
    Ans: Patches will be supported by the version upgrade. In case of notes, we have to verify whether these notes are supported by the new version (you can go into http://www.service.sap.com/notes to verify this. Also, we have to analyze whther the code in the note is already incorporated in the new version. In this case you can ignore the chanes choosing RESET TO ORIGINAL option
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
    If you have applied any OSS notes to objects in your system, the hot package may overwrite these objects.
    SPDD is used to identify dictionary objects
    and
    SPAU (repository objects), will identify any objects where the hot package is overwriting changes you have made through OSS notes.
    You must check all objects identified in SPAU and decide whether you need to reapply the OSS note or reset the code to the original SAP Code.
    Also once the changes have been done you would see a green traffic light.
    If you double click on the modified object it will show you a split window where on the left you will have the original version and on right the modified version. So you can choose which to keep and which to reject. You may keep the modified version incases where you know that the notes will only be pakages in the next version.
    http://help.sap.com/saphelp_47x200/helpdata/en/2e/6d66647d9011d396b60000e82de14a/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/2e/6d66647d9011d396b60000e82de14a/frameset.htm
    http://www.sap-img.com/bc018.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/068d380be34e6ce10000009b38f842/content.htm
    http://help.sap.com/saphelp_46c/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/content.htm
    http://www.sap-img.com/bc018.htm
    http://www.sappoint.com/oss/spamspau.html
    http://help.sap.com/saphelp_nw04/helpdata/en/fe/4b284837bf11d5b3bf0050dae02d7c/content.htm
    http://help.sap.com/saphelp_webas620/helpdata/en/83/7a18ecde6e11d195460000e82de14a/content.htm
    http://64.233.167.104/custom?q=cache:nJasGnXhh4sJ:www.asug.com/client_files/Calendar/Upload/SAP%2520Upgrade%2520Lessons%2520Learned.ppt+spau(SAP)&hl=en&ct=clnk&cd=5&ie=UTF-8&client=pub-3723304925932908
    Also the following link is very good
    http://www.sapgenie.com/basis/starter.htm
    Regards,
    Naresh

  • Modification Assistant

    Do changes to standard using Modification Assistant require Access key.
    I want to attach f4 help to a sap standard field .
    Is there any way to accomplish it without modification assistant.
    Please Suggesta way

    Try to switch off the Modification Assistant.  Do your implemention.

  • Modification Assistance

    Hi Guru's
    In modification assistance when we have to insert certain code then we get it as follows:
    *{ insert                 Req no
    *}insert.
    Can i do the case as shown below please take a note the outer nsert is done by someother user and also the req no is different
    *{ insert                 Req no
    "some abap code.
    *{insert                   req no
    *}insert
    "some abap code.
    *}insert.
    but
    when i try this in the insert created by me (inner) doesn't take the req no and even i get a message modification bracket structure is inconsistent.
    please tell me what i ma doing is correct?
    Reg,
    Archana

    Hi,
    While changing the sap standard  apllication,the first time you give access key it will generate the request
    and from there after it iwll not ask any request.you can simply write the code where evre it's appropritae.
    if it is transported to production then if you try to insert code it will ask for the request.
    Check the  below links,might be useful.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba5aceda11d1953a0000e82de14a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/b8/3cf839fd35384de10000000a11402f/content.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
    Regards,
    Raj.

  • Modification assistant for customer reports

    Hi,
    How to enable modification assistant for the reports in customer namespace ?
    Regards,
    Rafal Olechowski

    sorry for the late reply.
    No You can not do it through Modifictaion Overview for Custom reports, unless and untill its an standard SAP program.
    Might be there any standard functions which could help you, but am not sure of this.
    And as i said the version management and the version comparision can help you know the changes done in any report. in the version management only you can find the version comparision based on the requests.
    Regards
    Gopi

  • HT3743 Alright! But i need help to unjailbreak my iPod Touch now. I need assistance. Please help me!

    I  need help to unjailbreak my iPod Touch now. I need assistance. Please help me!

    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
    Go to where you found out how to jailbreak

  • Disable Modification Assistant

    Hi,
    How can I disable the Modification Assistant?
    We use SAP version 4.7.
    Appreciate your help,
    Regards,
    Ivson
    P.S. I hope this is the right forum for this question.

    Hi,
    Check the below link on how to switch of the assistant.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/83/7a18d1de6e11d195460000e82de14a/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/83/7a18d1de6e11d195460000e82de14a/frameset.htm
    Thanks,
    Ramakrishna

  • SPAU: Modification assistant switched off Upgrade ended

    Hi,
    I am trying to modify an Include in a function group, but I am not able to activate it.It shows a message 'Operation Terminated'.When I checked in SPAU , for the same include it says 'Modification assistant switched off Upgrade ended'. How can I switch on the modification assistant.Its Urgent ..
    Regards,
    Smitha

    Hi,
    Double click on the object and go to editing mode; edit if any changes are required .Usually this problem comes if all the changes of old version did not come to new system , manually add those changes and then activate it. The red stop sign will change in to green check. If u dnt have any changes to modify the object the also go to editing mode and activate it manually.
    Madhu.
    Edited by: Madhu Omer on Apr 16, 2009 12:52 PM

  • SPAU Modification Assistance

    Hi,
    we are upgrading the system and needs to clear the spau list. there is a huge list.
    I implemented few of this. But i am not able to implement the remaining.¨
    I see some types of errors.
    1. "Format of correction instructions XXXX XXXXXX XXXXXXXX ; unable to
    read corr. instruct."
    2. And other issue is i get a green question mark for some notes.
    NOw dont know how to clear this. can somebody help me in this.
    Apart from Note correction there are also list in With Modification Assistant
    and Without Modification Assistant.
    My second query is can ignore the above note errors and move ahead with With
    Modification Assistant list. Or i need to clear all Note correction and then
    proceed with With Modification Assistant & Without Modification Assistant.
    Thanks....

    Hi
    check this
    http://www.sap-img.com/bc018.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/068d380be34e6ce10000009b38f842/content.htm
    http://help.sap.com/saphelp_46c/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/content.htm
    Please find below, answers to your questions:
    1.What objects will come in SPAU and SPDD?
    Ans: All the objects which are modified, after tansporting to the current system,
    will be listed in SPAU and SPDD. SPDD contains the list of all modified Data Dictionary objects, like tables, dataelements, domains,view...etc. The rest of all the modified repository objects will be listed in SPAU.
    What happens to the modifications done in the older version when we upgrade the version? (with Modification assistant and w/o)
    Ans: After the initial upgrade happens, we have to do adjustments from SPAU/SPDD to maintain or reset the changes. That is, from the list of objects in SPAU/SPDD, you have to either carry forward the changes to the new version, by choosing the option ADOPT CHANGES (available on right click) or RESET TO ORIGINAL (available on right click).
    Will they come in these transactions?
    Ans: yes, they will be listed in these transactions, after the BASIS updgrade activity.
    And what if we apply some patches(Notes) to the system? What is the impact of these patches to the SPAU transaction?
    Ans: Patches will be supported by the version upgrade. In case of notes, we have to verify whether these notes are supported by the new version (you can go into http://www.service.sap.com/notes to verify this. Also, we have to analyze whther the code in the note is already incorporated in the new version. In this case you can ignore the chanes choosing RESET TO ORIGINAL option
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
    Regards
    Anji

  • Modification assistant vs without modification assistant

    Hello All,
    Can any one explain what is the difference between them?
    Thanks,
    Vibha

    hi
    <b>Modifications With the Modification Assistant</b>
    If the object has not been adjusted in transaction SPAU, a traffic light appears in front of the object. In the Modification Browser these objects are highlighted. When using Reset to original the active version on the database is confirmed as the new original version. The object remains unchanged. Only the modification data is deleted. When using Modification adjustment the version imported in the last upgrade or Support Package is saved in the modification logs as original. In addition, there are the modifications from the adjustment. The Modification Browser (transaction SE95) gives an overview of these modifications.
    If the object has been adjusted, in SPAU either a green checkmark or a stop sign appears in front of the object. If an adjusted object is reset to original, the active version is replaced by the original version saved in the modification logs. The modifications made using the Modification Assistant are lost when you Reset to original.
    You can use Reset to original in the category With Modification Assistant also for objects that are contained in note corrections.
    Already adjusted data elements cannot be reset to the original version. Edit the data element in the ABAP Dictionary to restore the desired status. You can make use of the version administration to do this.
    <b>Modifications Without Modification Assistant, Translations, Migration Objects</b>
    If the object appears in the tree in one of the categories Without Modification Assistant, Translations or Migration Objects, always the active version becomes the original version when you use Reset to original. The modification log is deleted, independent of whether the object has been adjusted or not. The object itself remains unchanged. If the object has been adjusted, the user gets a warning message. Unlike with objects supported by the Modification Assistant, the original version no longer exists. The modified active version is confirmed as original version.
    regards
    ravish
    <b>dont forget to reward points if helpful</b>

  • My iTunes card won't redeem and when I try to it comes up with this "The gift certificate or prepaid card code you entered has not been properly activated. Please contact iTunes Store costumer support for assistance" can anyone help me?

    My iTunes card won't redeem and when I try to it comes up with this "The gift certificate or prepaid card code you entered has not been properly activated. Please contact iTunes Store costumer support for assistance" can anyone help me?

    Is the store that you bought the card from nearby so that you can try going back and asking if they can activate the card properly ? If it's not, or if they can't/won't activate, then you will need to do as the message says and contact iTunes Support (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes (you will probably need to give them images of the front and back of the card, and possibly its receipt)

Maybe you are looking for