Modification Comparison - No Changes Possible

Hi,
I have a program which has been modified (SAPLRSM1) with the implementation of a SAP note 987566.  This has made a change which has appended two parameters to an include, which is giving a syntax error.
SAP Note 990672 looks to fix the problem by removing one of the parameters, but I cannot implement this note as it seems to be obsolete, and has the status Implementation Status: Cannot be implemented .
I know exactly where the error is in the code and in the short term want to comment out the parameter which is giving me an issue, but when I go to change the include, I get the message:
Carry out modification comparison for CPUB CL_RSCRT_RDA_TOOLS first. No changes possible
I have ran the modification comparison, but I do not get any further options.
Could somebody tell me where I am going worng and whether it is possible for me to make this change in this way.
We have SAP helping with some work which we are doing on our new 2004's box, but I need to get this part working urgently.
Thanks
DJL

Dear Michael,
Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
Let us know the status.
Thank You.
Kind Regards,
Rafikul Hussain

Similar Messages

  • Carry out modification comparison for J_1BV45A first. No changes possible

    Hi, every expert,
    when I change the object J_1BV45A,  It appears the error as below:
    "Carry out modification comparison for J_1BV45A first. No changes possible
    Message no. EU 526
    Diagnosis
    You are trying to edit an SAP object which has already been changed or enhanced in the current system.
    A new version of this object, changed by SAP, has been imported into the system with a Release upgrade.
    The new SAP version has not been reconciled with the modified version.
    System Response
    The system will deny access in change mode or enhancement mode until the objects have been reconciled.
    Procedure
    Run the modification adjustment (SPAU) for the object. If the object is supported by the Modification Assistant, you can adjust it by clicking the stoplight."
    I don't know how to use SPAU to adjust it ?  and I donn't know where is the tab 'stoplight'.
    Anyone could help me how to resolve it ?
    Best Regards,
    Michael

    Dear Michael,
    Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
    As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
    Let us know the status.
    Thank You.
    Kind Regards,
    Rafikul Hussain

  • Message "Carry out modification comparison... No Change possible" and SPAU

    Hi
    I'm trying to manually implement SAP note 1400194 and 1428579 both need to amend the Include RPCP45GD.
    Every time you try and open the Include in edit mode  to apply the changes manually you get the message
    "Carry out modification comparison for REPS RPCP45GD first. No Change possible"
    So I run SPAU... but the object  RPCP45GD does not exist in SPAU so I can't do a modification comparison on something that's not there !
    Any ideas how I should proceed ?
    cheers Hugh

    Modification assistant is on, otherwise SPAU would not work...
    Activated object but had no effect...
    However I did find a note in SPAU that was unreleased that related to another note that seemed to change the include I am looking at. This may be the reason why it's locked.
    SAP's modification assistant is about as useful as a hole in  the head !

  • Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE

    Dear all,
                   i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
    Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
    ...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
    Thanks in advance,
    Naren

    >
    naren wrote:
    > Dear all,
    >                i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
    >
    > Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
    > ...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
    >
    > Thanks in advance,
    > Naren
    Hi  ,.
    Once You go to SE95 Give the package name as  - J1I2 and Execute .
    If some Note has been applied for the package (Whcih Contains your FM) then it will show following nodes
    Note Corrections
    With Modification Assistant
    Without Modification Assistant
    Appends
    So you need to find under whcih node Your update for FM exits .It must be Visible in red .
    Now goto Menubar >>Goto >>Modification Adjustment .
    once you adjust ,the FM should become Editable .
    Regards,
    Rajesh

  • Modification comparison

    We are upgrading from 4.5b to 4.7.
    Whilst attempting to apply a SAP note, the message 'carry out modification comparison first. No changes possible' is received when attempting to modify a standard SAP program.
    Any suggestions how to overcome this?

    Hi Kevin.
    Have you run transaction SPAU prior to your attempt of changing the SAP program?
    Sounds like the program has been modified before and now a sap version of the program has been delivered. Before changing the program again, the system wants you to decide what to do with your old modifications.
    Hope this helps, Kathrin!

  • No changes possible

    Dear all,
    I want to change a standard method of the class CL_RSR_WWW_PAGE. When I click the change button, it shows "Carry out modification comparison for METH CL_RSR_WWW_PAGE PAGE_CONTROLLER_WRAP first. No changes possible".
    How can I do?
    I want to change this method.
    Thank you very much.
    Seven.Jin

    Dear ravi,
    Thank you, but I want to change it.
    Is there any way to change it?
    The other standard method of this class can be edit by me.
    Seven.jin

  • Modification Comparison for SAP object

    When we try to modify the program /DBM/MT_TILL_FUNC_D2063, reports the following message
    u201CCarry out modification comparison for REPS /DBM/MT_TILL_FUNC_D2063 first. No changes possibleu201D
    We just update our DSAP BM 6.00 system to service pack  SAPK-60007INDBM from SAPK-60005INDBM.
    Before this update was made, we were able to modify the programs, and there was not necessary for a registration key, know on it is necessary to input this key, we input the key from the marketplace,  but still we canu2019t modify it.
    We already try to do the recommendation mentioned, but the object doesn't show in the browser panel.
    What can I do to resolve this issue?
    Alvaro Corpeno

    Hello Alvaro
       This message is caused because there is/are some object locking the object DBM/MT_TILL_FUNC_D2063 . So to check what action is necessary to take to do so you need to check if the objects are notes or just reuqests:
        - Transaction SE16
        - Table SMODILOG
        - List all entries for object DBM/MT_TILL_FUNC_D2063
        - There you will see for each record field OPERATION
        - Check all entries that contains OPERATION = 'NOTE'
        - On field MOD_NAME you can check the note number - last 4 digits are note version
        - Upload this note via SNOTE transaction.
        - This action will update system entries and unlock the object
    Kind regards
    Carlos Machado

  • Modification comparison in SE95

    Hi,
    We are in the process of patch upgrading. After the Upgrade we have applied lot of notes. While applying some manual changes IT ask us to carry out modification comparison first, and it not allowing us to do modification.
    It advise to do modification comparison thru T-Code SE95, pl. help me how to proceed further
    Thanks
    Rengaraj

    Hi,
    The Modification Browser
    An overview of all modifications and enhancements found in your system can be displayed from the ABAP Workbench choosing the function Overview ® Modification Browser (SE95). You can also display an overview from the Repository Browser using Environment ® Modification Browser.
    The following selection screen appears, where you can input selections that limit what the Modification Browser outputs:
    Standard selections can be made on the upper half of the selection screen by entering the person who last changed the object, the number of a transport request or the package. If you enter the number of a transport request into the field Last transport request, the system displays only those objects of the request which were not modified in requests created at a later date. If you insert the request number in the field Request/Task, the system displays all modified objects of the object list.
    You can use the  Note Assistant to import notes into your system and apply the correction instructions contained therein. In the Modification Browser, you can expand a subtree below each note which contains the objects involved in the note correction.
    Standard objects that are supported by the Modification Assistant during modification or upgrade can be displayed using the With Modification Assistant checkbox. All other objects are listed under the Without Modification Assistant category. This category also contains all objects that were modified in the current SAP System before the Modification Assistant was introduced.
    Business Add-Ins provide you with an overview of all enhancements and modifications undertaken in your system. Further information on this way to create enhancements can be found in the section on Business Add-Ins.
    Appends can be  append structures,  append views or  append search helps.
    As on the Display Options tab, you can restrict the display of objects modified or reset using specific criteria on the Reset Objects tab.
    Once you have made your selections, the system takes you to the Modification Browser overview.
    The Color key pushbutton displays a list of what certain highlighting colors mean within the Modification Browser.
    Modifications to programs that cannot be assigned to a modularization unit (for example additional fields or comment lines preceding a subroutine) are displayed in the node External modularization units.
    You can branch directly to ABAP Workbench tools from the Modification Browser display by placing your cursor on a specific object and choosing Display or Change.
    Changes cannot be made to objects currently being adjusted.
    You can also undo modifications from the Modification Browser by placing your cursor on a specific object and choosing Reset to original. Further information can be found in the section Resetting to the Original.
    The Reset to original function can also be used with objects that were modified without the help of the Modification Assistant. Using this function causes the object to be deleted from the modification overview. If no original is available for the object, it is now treated as an SAP original (modifications may, however, be lost during upgrade).
    If new complete objects (programs, function groups, and so on) are created, the corresponding transport object is added to the transport request. If function modules are deleted or view maintenance modules are generated, the associated function group is added to the transport request. In these cases, the Created/Generated node in the Modification Browser is displayed below the associated complete object.
    Objects that have yet to be adjusted also show up in the Modification Browser and are highlighted in color. The objects displayed are compared during an upgrade or when a support package is imported in transaction SPAU by choosing Utilities ® Maintenance ® Upgrade utilities ® Program compare. Read the following sections for more information.
    SPDD and SPAU are the transaction that are used after the upgrade for modification. SPDD is for adjusting the DDIC changes and SPAU is for all other repository objects like programs etc.
    *Reward points
    Regards

  • Set Project status error Activity 000005012744 0010 No changes possible bec

    Hi All,
    I am getting this error on RPM "Activity 000005012742 0010: No changes possible because of status CLSD"  after setting project status to Complete Technically or Closed. I could not change the status to any other status when set to these two statuses.
    I tried looking for custom implementation in the BADIs but unfortunately breakpoint is not triggered on any of the BADIs. Is this a configuration issue?
    Thanks and I hope someone can help me.
    Renz
    Edited by: Jorenz.Llanes on Jul 5, 2011 8:43 AM

    I found out that the activity of a project should be released first before setting a status to the Project level after which is applied to the project hierarchy.

  • Easy Cost Planning -Costing has already been completed. No changes possible

    Hi,
    I am in Easy Cost Planning tool and i would like to remove some items or add in some items.
    The system is giving a message that "Costing has already been completed. No changes possible"
    May i know where did we complete the costing(Transaction code?) such that no changes are possible on East Cost Planning tool anymore?
    Thank you.

    Hi,
    Check the Costing Model in CKCM and do changes as per your requirement.
    Now Use this costing Model in CJ20N while cost planning for wbse. you can change cost plan here also as per wbse specific requirement.
    regards,
    Hari

  • R3TR generated, changes possible in 3.5 version

    Hi,
    when i was trying open communication structure igot a warning message as R3TR generated, changes possible and i can see my communication structure in display mode and not in change mode , and icant able to edit my mapping .
    aravindanpagadala

    Hi Aravindan,
    This message appears when you have transported an object to the next environment and then try to change the object again in the original system.
    Check whether you have moved your communication structure from Dev to QA already. If so then use a new Transport Request to capture the communication structure. Once you have assigned it to a transport request the communication structure should be available for change.
    Hope this helps.
    Regards,
    Amrita

  • Reservation created automatically. No manual changes possible

    Hi Experts,
    The reservation created automatically for an order can't do any changes and giving an error message as "reservation created automatically. no manual changes possible".
    Kindly help me how to do the changes.
    Thanks & Regards,
    Arul.

    I guess the error message makes it clear you cannot do any manual changes via MB22 or some Z program.
    The only way to change such reservations is to go to the respective order & make the necessary changes to the specific component eg: change of date or quantity etc.
    Hope it clarifies.

  • How to do Modifications to ECO change types?

    Hi,
    I'm a developer and new to PDM module.
    Can any one please help me in doing the "Modifications to ECO Changes types to SAP PDM".
    Thanks,
    Venkat

    Use   t.code: OS56.
    this is a cusotmising transaction, u need to try in development first.
    path.
    SPRO -  cross- application comp - engg change mgmt - >Change type

  • Carry out modification comparison for REPS  first.No changes possible.

    Hi all,
          Can anybody help me out. I am new to upgrade project. I have made all the adjustments in SPAU, but left out with one object.
         I have chosen reset to original for this object. When I want to add  some custom code. It is not allowing me to do so throwing an error saying that " The object is still in upgrade mode." . It is not locked under transport #, but it is stored in smodilog table under my name.
         I am not able to see this object even in SPAU transaction, to correct my actions.
    Thank You in Advance,
    Nirmala.

    Hi Rajneesh,
    please have a look at following link and get a key from SSCR:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c8/19766d43b111d1896f0000e8322d00/frameset.htm
    Regards
    Bernd

  • System Preferences changing, Possible Compromised P/W

    nikdgr
    Re: Trojan BackDoor.Wirenet.2 
    Feb 15, 2014 1:25 AM (in response to Linc Davis)
    I was recently reviewing comments from Linc Davis and after replying was told it might be better to start a new discussion
    Ive been having issue with my MacBook Pro, finding locks open in System Preference, Password Login issues, Bluetooth enabling without going into System Preferences, in fact I rarely use Bluetooth,.. and reconfiguration of Security & Privacy, wifi starting without opening network  preferences. I did run the diagnostic test Linc Davis posted in support for "Trojan BackDoor.Wineret.2".
    Maybe the wrong test for me to run.
    But I was informed that a colleague had aquired my password for my MacBook Pro,  Im not sure if its true, second hand information, although this colleague did have access,...... How or if the P/W was attained maybe from me leaving exposed laying out in written form, not sure ....but I have since changed the password, many months back, and the issues I mentioned still come and go, any possiblity these could be changing romotely
    Basically what I'd like to know is any of the information from the diaognostic test of Linc Davis's is revealing anything out of the ordinary. Additionally, I've been suggested to do a clean install becuase of a root access possibility.
    I would take this to the proper authority, however where Im at: the judical system could care-less, ....the police don't even have cars, pen, let alone paper to write a report.
    Thank you for any suggestions
    Boot Mode: Normal
    USB
       Hub (SMSC)
       Hub (SMSC)
    System diagnostics
       Preview 2014-01-28-003447 hang
       SecurityAgent 2014-01-30-141803 crash
       SecurityAgent 2014-01-30-141811 crash
       SecurityAgent 2014-01-30-141949 crash
       SecurityAgent 2014-01-30-142226 crash
       SecurityAgent 2014-01-30-142411 crash
       SecurityAgent 2014-01-30-142519 crash
    User diagnostics
       cider 2014-01-26-234202 crash
    Extrinsic system jobs
       com.microsoft.office.licensing.helper
    launchd items
       /Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
                 (com.microsoft.office.licensing.helper)
       Library/LaunchAgents/com.apple.FolderActions.enabled.plist
                 (com.apple.FolderActions.enabled)
       Library/LaunchAgents/com.apple.FolderActions.folders.plist
                 (com.apple.FolderActions.folders)
    Extrinsic loadable bundles
       /System/Library/Extensions/HuaweiDataCardDriver.kext
                 (com.huawei.driver.HuaweiDataCardDriver)
       /Library/Internet Plug-Ins/Flash Player.plugin
                 (com.macromedia.Flash Player.plugin)
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
                 (com.microsoft.sharepoint.browserplugin)
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
                 (com.microsoft.sharepoint.webkitplugin)
       /Library/PreferencePanes/Flash Player.prefPane
                 (com.adobe.flashplayerpreferences)
       /Library/Spotlight/LogicPro.mdimporter
                 (No bundle ID)
    Unsigned shared libraries
       /usr/lib/bkLib.dylib
       /usr/lib/lib6200Lib.dylib
       /usr/lib/lib6246Lib.dylib
       /usr/lib/lib6270Lib.dylib
       /usr/lib/lib7225lib.dylib
       /usr/lib/lib8200Alib.dylib
       /usr/lib/lib8200lib.dylib
       /usr/lib/lib8220lib.dylib
       /usr/lib/libAgent.dylib
       /usr/lib/libcurl.zte.dylib
       /usr/lib/libIceraDownloadLib.dylib
       /usr/lib/libmd5.dylib
       /usr/lib/libTinyXml.dylib
    Restricted user files: 317
    Font problems: 40
    Elapsed time (s): 213

    I didn't see your message last month, but was just searching for other cases of reported Wirenet infections. I've seen three cases now in the last two months, so this is obviously being actively distributed somehow, and up until March 13, Mac OS X did not protect you from it.
    Wirenet, aka NetWeird, is malware that includes backdoor functionality, which means that it gives the hackers behind it the ability to install additional components on your system or make configuration changes. Basically, whatever they want to do. So, the question is, did you actually have it installed, or did your anti-virus software just detect an installer that you hadn't opened yet?
    It may be too late to get such information. If you are like most people, you deleted all detected files at the time they were detected, thus destroying any evidence we might be able to work with. If you can still extract information from your anti-virus software about what file(s) were found and where they were located, that would be exceedingly helpful.
    If you think you may have actually opened a suspicious installer or app, and that this malware was actually installed on your machine, there is only one possible response that can ensure that your machine is clean: erase the hard drive. See:
    How to reinstall Mac OS X from scratch
    If you're not sure, it would probably be safest to do this.

Maybe you are looking for