Modification for ECS for invoice and ASN functionality in SUS

Hello Experts:
Currently I am implementing SRM 5.0 with SUS integration in ECS. I have found some references that specify that if my requirement is to have the creation of Invoices and ASN in SUS, in order to transfer these to EBP I need to do some development on my own. I have to questions regarding this:
1.- The references only talks about Materials, is it possible to do this kind of implementation also for Invoices and ASNs of Services??
2.- Any of you could provide me with some general steps of the activities to be done in order to accomplish this requirement if I am using XI.
Thanks for all the information you can provide me.
Hugo

Hi
SRM-SUS integration is mainly used for service procurement where the document flow is PO> PO Response> Confirmation/Service Entry-->Invoice.
ASN doesn't carry any meaning for service procurement. You might use ASN if you are procuring direct materials.This is covered by MM-SUS integration.
Also pl. remember that SRM-SUS integration with ECS scenario is supported only to a limited extent by SAP. This means that your SUS confirmations when they come to SRM do not get replicated to ECC backend.
Thanks
Sanjeev

Similar Messages

Billing block for invoices and credit notes on Sold-tou00B4s level

Hi All
can we have billing block for invoices and credit notes on Sold-to´s level.
please advice.
Thanks
Tushar

Hi
The bellow way at document level.
One more way to maintian the billing block in the functionality of sales document types in VOV8
In VOV8 , Maintain proper value in billing block field.
So that , when you create the order or credit memo request system automatically pick the billing block.
Once remove the block of billling then only system allow to create the billing or credit memo.
Thanks,
KP
Edited by: phanik2503 on Mar 2, 2010 6:46 AM

Purchasing Report for invoice and stock

Hi guys,
in your opinion does it exist a unique report which contains the following informations for suppliers:
-          invoice codes from supplier not yet paid
-          POu2019s to supplier not yet delivered
-          ATH stock at supplier
At the moment my customer separates informations per supplier via FBL1N (invoices not paid), ME2L or ME2M (open for delivery), and MB52 (special stock, type O)
Iu2019m looking for a solution were this 3 information will show on 1 screen by entering the supplier.I have tyed with ME2M but it is not sufficient...
Thanks in advance best regards
Massimiliano

hi,
What are you trying to get is an Updates from three different area, which are not connected to each other..
FBL1N will get updated once the Payement is done,
ME2M would be updated once the GR is done, (ME2M does have any selection Parameter which will include 'Payement done')
MB52 would be cumulative Stock on Hand (this stock deoesnt link to PO)
However, you can go for a small Z program to built a customised Report.

Amount posted different for Invoice and Credit memo

Hi Experts,
The user has reversed only one line item of an invoice entry (RE), which was processed back in 2009. The invoice entry was processed with two Gl Accounts( Transit Comm.match and Com.Inv.GIT d.d) with amount allocated as 576.35 (5399.2 and -4822.85)with an input tax of 22%.But in the reversal entry the amount allocated to these account are different(-5851.62 and 5275.27), thought the total match to -576.35. Interesting thing is this entry was posted in a foreign currency (EUR) wherein the Local Currency values which is in PLN is same for both invoice and reversal entries. Exchange rate for both the entries are 4.20430.
Please let me know your thoughts..

Hi Ravi,
Here by reversal I meant the credit memo processed against invoice.

Diff pricing procedure for invoice and sales order?

can u please help me out in the following question
Is it possible to have different pricing procedure for sales order and invoice?

hi venkat,
yes we can very well have different pricing procedures for order and invoice. for the combination of
sales org + dist chan + div + <b>document pric proc</b> + cust pric proc --- > Pric Proc.
we determine the pric procedure. So, just have a different document pricing procedure for sales order document type and invoice document type. You can have a different pricing procedure with this change.
Hope it helps. Pl reward if useful.
Thanks
Sadhu Kishore

How to Removed VAT during DTW upload for Invoices and Credit Notes

Hi Experts
Please help.
Every time I import AR Invoice and Ar credit Notes there is an automatic posting to VAT even if the template has the same price after VAT and zero discount.
How to removed this?
Regards,
Sandra

Hi Julie
As requested. The SO is VAT code for nonvat or zero vat
As requested
Header
RecordKey     DocEntry     CardCode     CardName     Comments     DiscountPercent     DocCurrency     DocDate     DocDueDate     DocNum     DocRate     DocTime      DocTotal      DocType     JournalMemo     NumAtCard     Reference1     Reference2     Series     TaxDate
1     TRUE     MC002 A     ABENSON INC.                    20090930     20060428          1           13,950.0000      dDocument_Service      OB AR Invoices 09.30.09     SI#044792          SI#044792          20060227
Lines/Details
RecordKey     LineNum     AccountCode      LineTotal      VatGroup
RecordKey     LineNum     AccountCode      LineTotal      VatGroup
1          392000000     13,950.00      SO
Regards,
Amy

SAME LAYOUT with different heading for invoice and service order invoice

Hi,
I need to use the same layout for printing both invoice and service order invoice. The layout should print the same data except the title should be changed accordingly ( invoice or service order invoice).
Please help me with this
Regards,
Anik

Hi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank

How to achieve automated posted for invoice and stock transfers

Hi,
I have following queries for an RFP, can some one give hints on how to achieve them in SAP
o Receive self-billing documents from the customer, stating the deliveries and amounts that are settled and paid
o Automatic posting of invoice documents from the vendor, based on the data from the purchase order and goods receipts
o Process material stock transfers between two plants that use different SAP systems
Thanks & Regards
Raghu

Hi,
Normally when we do GR we take the cenvat credit by capturing & posting the excise invoice.
This can be done using the t.codes - MIGO or J1IEX.
So when the Material doc is posted the Part 1 register gets updated with Qty received.
If we post the excise inv using either MIGO or J1IEX the Part 2 register gets updated.
Now if you have done both the above then inorder to cancel the excise inv.
1. You have to cancel the Material Doc (so system wil use the Mov type 102)
2. Now Post your excise inv using J1IEX so that your Part1 reg will be updated ( i.e you are reversing the Cenvat Credit that you have availed).
3. Finally you have to cancel the Excise inv document using J1IEX so that your Part 2 register wil be updated.
Make sure that you do the above steps as per the above sequence else system will show the error as you mentioned.
Hope its clear.
Regards,
Kiran

Tables required for Invoice and Accounts

Hi,
I have done PO through (ME21) Tcode then Created Invoice for that PO through MIRO. And run Automatic Payment program through F110. Now I need to Know Account Document number for particular Invoice. i.e in which table it will store the value.
Regards,
Kiran

Download the tables wizard tool from
http://www.sap-img.com/sap-download/sap-tables.zip
This will give you more detailled information
on main tables and relations between them.
Regards,
Roy

Query for invoice and distribution detail

hi 2 all
anybody have the query for getting invoice with distribution detail in oracle payable r12.
thanks
zulqarnain

select ass.SEGMENT1 vendor_number,
ass.VENDOR_NAME,
assa.VENDOR_SITE_CODE VENDOR_SITE,
aia.INVOICE_NUM,
aia.INVOICE_DATE,
aia.INVOICE_AMOUNT,
aia.INVOICE_TYPE_LOOKUP_CODE,
gcc.CONCATENATED_SEGMENTS distribution_account ,
gcc1.CONCATENATED_SEGMENTS liability_account,
to_char(aia.GL_DATE) GL_DATE,
AP_INVOICES_PKG.GET_APPROVAL_STATUS( AIa.INVOICE_ID,
AIa.INVOICE_AMOUNT, AIa.PAYMENT_STATUS_FLAG,
AIa.INVOICE_TYPE_LOOKUP_CODE) APPROVAL_STATUS_LOOKUP_CODE
from ap_invoices_all aia,
ap_suppliers ass,
ap_supplier_sites_all assa,
ap_invoice_distributions_all aid,
gl_code_combinations_kfv gcc,
gl_code_combinations_kfv gcc1
where aia.VENDOR_ID = ass.VENDOR_ID
and assa.VENDOR_SITE_ID = aia.VENDOR_SITE_ID
and ass.VENDOR_ID = assa.VENDOR_ID
and aid.INVOICE_ID = aia.INVOICE_ID
and aid.DIST_CODE_COMBINATION_ID = gcc.CODE_COMBINATION_ID
and assa.ACCTS_PAY_CODE_COMBINATION_ID = gcc1.CODE_COMBINATION_ID
--and aia.INVOICE_ID = 81000
and aia.GL_DATE between '01-JAN-12' and '31-MAR-12'
order by aia.GL_DATE
Thanks,
Atul

I need an app for invoices and estimates. I downloaded invoice professional and cannot type in the product information on the invoice.

I need a recommendation for doing quotations and invoices. I downloaded Invoice Professional and cannot generate a quotation or type the product description into the description box.

Hello, Robert
Have you tried online invoicing software? These services will work regardless on your operating system. If you want to try, I would advise to start with INV24.com

Need .h file for x86 and x64 functions in clsernat.dll

We need to bypass the NI Vision Acquisition/IMAQ serial level and access the CameraLink serial layer directly for a custom baud rate.
The clsernat.dll is present but cannot locate documentation for the exposed functions in clsernat.dll. NI did not include a .h file or documentation regarding the typedefs for the following functions :
clFlushPort
clGetErrorText
clGetManufacturerInfo
clGetNumBytesAvail
clGetNumSerialPorts
clGetNumSerialPortsAtIP
clGetSupportedBaudRates
clSerialClose
clSerialInit
clSerialRead
clSerialWrite
clSetBaudRate
( Reasoning- IMAQ will occasionally validate the camera file and change the baud rate. The end result is missmatched baud rates corrupting the serial data channel.)
Any assistance would be appreciated.
Steven.

Joel,
Appologize for the earlier typos. (Was responding through a browser on a touchscreen phone.)
The baud rate in this particular case is 57.6K.
The camera link cl serial interface will work fine all day communication at 57.6K using the MFG's test utility (when the camera file has the default baud rate of 9.6K.) The NI document which also confirms this is a viable speed for the 1428 is http://digital.ni.com/public.nsf/allkb/359CC1956ABBB6F3862575A500674FEC and 57.6K is a listed speed for the 1433 board.
What is strange is other manufacturers provide the c++ header files, libs, and the required dll but NI only includes the dll in the IMAQ package. (Especially since NI provided an early implementation to the Camera Link working group with these files.)
Thank you,
Steven.

Posting Partial payment for Invoice and manually clearing the Items

item 1 Balance of 1st bill-24000
Item 2 Incoming payment - 20000
Item 3 Adjustment - 2000
These 3 items appears as open items in the Vendor Line item display. But when i try to clear the vendor account manually using F-32. The item 1 should clear against the Item 2 and create a new residual item - 4000. But when i try to clear the vendor account i am unable to it says the difference is too large for clearning...am i missing some thing to perform. Or any body can suggest me the right way to clear and what items to select.
Looking farward for your earlier reply.
Best Regards
raj

Hi,
use FB0% or F-32 and <b>Posting Residual Items</b>
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9bba1455711d182b40000e829fbfe/frameset.htm
A.

MacBook keyboard -shortcut for HOME and END function on the keyboard?

Hi all,
I was wondering if anyone could tell me how to trigger the HOME and END button which normally is placed on a PC keyword, I can't find any shortcut for it?
I'm running bootcamp with windows vista on my MacBook 13'1
Hope that some can help
Cheers,
Jesper
Message was edited by: Jesper Sørensen

Not sure about Pro, but on my MacBook (Leopard 10.5.6):
In Word
= fn + right or left arrow keys only take me to the "home" or "end of the particular line I'm on.
= fn + up or down do the same as the MS "pg up" or "pg dn"
= fn + command + (arrow keys) take me to the very beginning or end of the document (Word or Excel).
In Excel
= command + right or left jumps to the next cell that has info in it (skips empty cells)
= command + up or down jumps to the beginning or end of adjacent cells with info in them.
= fn + right doesn't do anything
= fn + left takes me to the beginning of whatever row I'm in.
= fn + up and down are the same as pg up and pg dn. So is command + up or down arrow.
= fn + command + left arrow takes you to the beginning of the document (same as "Cntrl + Home")

Query Modification for Invoice Outstanding

Hi ,
Can anybody modify this code by DocNum. This query displays the same invoice 2 times when the invoice is having more than 1 item. How to get the report without invoice number repeat.
SELECT T0.[DocNum], T0.[DocDate], T0.[CardName], T1.[OpenSum] ,T1.[VatSum],
T0.WTSum AS 'TDS Amount',
T0.DocTotal,
(T0.DocTotal-T0.[PaidToDate]) as 'BalanceDue',
(SELECT CASE
WHEN T1.TargetType='14' THEN 'A/R CreditMemo'
Else ' '
End) as 'Target Type'
FROM OINV T0 INNER JOIN INV1 T1 ON
T0.DocEntry = T1.DocEntry
WHERE T0.[DocDate] BETWEEN '[%0]' AND '[%1]'
Regards
Srini

Hi Srini,
Try this first:
SELECT T0.DocNum, T0.DocDate, T0.CardName, SUM(T1.OpenSum) 'Open Sum',SUM(T1.VatSum) 'Vat Sum',
T0.WTSum AS 'TDS Amount',
T0.DocTotal,
(T0.DocTotal-T0.PaidToDate) as 'BalanceDue'
FROM OINV T0 INNER JOIN INV1 T1 ON
T0.DocEntry = T1.DocEntry
WHERE T0.DocDate BETWEEN '[%0\]' AND '[%1\]'
GROUP BY T0.DocNum, T0.DocDate, T0.CardName,
T0.WTSum,
T0.DocTotal,T0.PaidToDate
Thanks,
Gordon

Modification for ECS for invoice and ASN functionality in SUS

Similar Messages

Maybe you are looking for