Modification in FD32

Hi,
   I am new to this forum.
  I have a requirement to add 5 more selection fields to the standard screen in FD32 transaction code. Can any one help me how to do this.
Thanks
bha

Hi,
Business Add-in
<b>FI_DUZI_ROUND_CML</b> Rounding in Accordance with Contract Conditions
    Enhancement
RFDRRANZ User exits: Accounts Receivable Information System
<b>Reward points</b>
Regards

Similar Messages

  • Is there any BAPI or FM which updates or modifies FD32 transaction

    Is there any BAPI or Function module  which updates or modifies the fields of FD32 transaction screens

    Hi, Srikanth
    Please Have a look at this Link [BAPI for FD32 |bapi for FD32]
    Please Search Before Posting
    Hope will Solve out your Problem,
    Best Regards,
    Faisal

  • FD32 Credit management 'sales value'

    I am on SAP ERP, I'm trying to figure out how to pull the data that makes up the credit exposure - 'SALES VALUE.'  I believe the sale value includes all undelivered or only partially delivered orders.  I can not find a way to confirm what makes up the total sales value.  How would i oull that detail?
    Thanks in advance for your assistance!

    check oss note 378833.. it has loads of information.
    It is difficult to analyze incorrect open credit values:
    The open credit values are updated in Sales Information System (SIS) structures. The structures cumulate values due to common characteristics. Due to the cumulation, you cannot find out subsequently which documents caused the values.
    The system generates and reduces open credit values in the SD document chain. The system posts the credit value to the SIS structure and clears it later. This may cause differences between the posted value and the cleared value.
    See Note 377165 for a detailed description about updating open credit values.
    To correct the incorrect open credit values, proceed as follows:
    1. Correct known errors that occur in the update of the open credit values. To do this, check the relevant composite SAP Notes and implement the relevant corrections in your system if you have not yet imported a Support Package that contains them.
    1176872 Composite SAP Note: Incorrect credit update, 60*
      735791 Composite SAP Note: Credit update incorrect, 500
      735163 Composite SAP Note: Incorrect credit update, Release 4.70
      410685 Composite SAP Note: Incorrect credit update, 4.6B/C
      385481 Composite SAP Note: Incorrect credit update, 4.5B
      385091 Composite SAP Note: Incorrect credit update, Release 4.0B
      364928 Composite SAP Note: Incorrect credit update, Release 3.1I
    2. Use composite SAP Note 425523 to check that there is no explanation for the update that you observed.
    3. Check whether incorrect open credit values exist in your system. To do this, compare the sales values in transaction FD32/FD33 (status view) with the results of the report RVKRED88 which you run for the same credit customer and credit control area.
    4. Check whether the incorrect update is caused by user exits or by modifications in your system. The following notes describe possible sources of errors in customer-defined source code.
      216448  BW/SIS: Incorrect update / SD user exit
      178328  Problems due to incorrect user exits in SD
    5. Use the report RVKRED77 to correct the open credit values. For more information about the report, see Note 400311 (or the documentation of the report in your system) and Note 363343 or Note 755395.
    To determine the reason for the incorrect open credit values and to reproduce the error, proceed as follows. Reproducing the error in the test system is a basic prerequisite for analyzing and correcting the problem.
    1. Monitor the open credit values to find out when incorrect values occur. To do this, compare the sales values in transaction FD32/FD33 with the results of the report RVKRED88 again.
    2. Identify the documents that were created or changed since the last run of the correction report RVKRED77 in accordance with Note 389377. One of these documents must have caused the incorrect credit values.
    3. Try to determine which document caused these values. To reproduce the problem on your test system, use the same data as in the document that is causing the incorrect values.
    4. Use transaction MC30 (as described in Note 381789) to check the update of the open credit values after a document is posted.
    5. Use Note 1042857 "Logging credit values" to log the update of the credit values so that you can evaluate this later.
    If you can reproduce the error in your test system but there is no explanation for the update you observed, open a customer message with logon data, sample data, a detailed description of the procedure and the relevant contact person.

  • FD32 - Any User exit / BADI ?

    Hi,
    Can anyone help me out in finding any Enhancement(User Exit/BADI) for <b>FD32</b> Transaction.
    Regards,
    <i><b>Raja Sekhar</b></i>

    Hi
    Use the prg to find userexit for any transaction you want.
    *& Report  Z_FIND_USEREXIT                                             *
    report  z_find_userexit                         .
    *NO STANDARD PAGE HEADING.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Please reward.

  • Open sales orders for FD32

    Hi all,
    As everyone must be knowing in FD32 we can see Sales value ( Open sales orders + Open deliveries).
    For one of my customers i can see an amount in open sales orders field, but i could not find the SO in VA05 report.
    Can anyone help me to find list of Open sales orders which are reflected in FD32 sales value field.
    Thanks all.
    Rajesh

    Dear Rajesh sandbhor ,
    First please check whether there is any value in FD32>Extras>Sales Value.
    If YES, then Instead of going for VA05, in fd32, go to environment>sales and distribution documents>open orders.
    Please check and revert back if there is any issues.
    Thanks & Regards,
    Hegal K Charles

  • Error while transporting modification in module pool of a specific infotype

    HI experts,
    While transporting some modifications that have be done on the PAI of a module pool of a specific infotype, we have an error with code return = 8, the error is --> Original object R3TRPROGMP900730 must not be changed!!!
    Any suggestion .
    Tanhks a lot .

    Hi ,
    Nice to know that your problem is solved. If any of the replies were usefull please acknowledge their work.
    And it would be great if you can just put in your remarks about the best  solution you had in solving that problem.
    It might be useful to other users when they encoutner such problem.
    BR,
    Vijay.

  • "Save image" button of Camera Raw does not save JPEG with modifications made.

    I am using Bridge CC to process my RAW images and make modifications to some JPEG images as well.  I have no need to further alter images in Photoshop at the moment, so I do all modifications in Camera Raw. After altering my images, I then press the "save image" button at the left bottom corner of Camera Raw and choose the settings to save in JPEG.  However, when I upload these JPEG images to a website or when I email them, the image is uploaded without the modifications I had done!  It seems to me that Camera Raw is saving JPEGs the same way it does for RAW images, in a non-destructive manner, only attaching instructions for the images to be displayed properly on Photoshop. But when I save an image in JPEG, I expect the image to be saved entirely with the modifications I made while still keeping the original RAW file.  What goes on then?  What is Camera Raw doing and how do I get to save a modified image in JPEG with Camera Raw?  Would you please explain?
    Many thanks for your help,
    Beza

    Hi,
    What version of camera raw and operating system are you using?

  • Can't view LR metadata modifications on Windows Explorer? What gives?

    Hi all,
    This is my first question to the community, I searched for the answer to this problem here and elsewhere but not able to find out why, hope you can help.
    I'm coming to grips with managing data in LR but I've stumbled upon a snag. I'm using LR 5.7 and adding metadata to CR2 and JPG files and wanted to check whether the metadata modifications showed up on Windows Explorer. It appears as if they don't. My workflow is detailed below, could you point out if I'm missing anything?
    What I did was fill some IPTC and EXIF fields on LR 5.7 and click on "save metadata to file". The fields I added data to was headline and description (IPTC), user comment (EXIF) and title and caption fields (Lightroom's own fields I presume).
    However the metadata I added does not display on Windows Explorer (upon right click/properties/details). I'm using Windows 7 and MS website says Explorer is able to display IPTC and EXIF fields. This however does not seem to be the case. Did anyone else come across this problem or am I doing sth wrong.
    To test it further I modified Title, Subject and Comments fields on Windows Explorer (through file properties/details tab),.I don't know whether these fields are an official part of IPTC or EXIF standards but they don't display on LR either.

    My Windows File Explorer (8.1) does show some of the metadata that LR 5.7 writes, but not all.  I no longer have access to Windows 7, but I'm certain that it does too.  LR 5.7 will also read metadata written by Windows Explorer. 
    Some general caveats:
    - Be sure to Save Metadata To File in LR, or better, set the option Edit > Catalog Settings > Automatically Write Changes Into XMP.
    - When you make changes to metadata outside of LR, be sure to Read Metadata From File to get it back into LR.
    - When you make changes with the Explorer Properties window, make sure you click OK or Apply.
    - Use the free Exiftool if you want to examine metadata authoritatively.  Virtually every other program, including LR, Windows Explorer, and OS X Finder, has significant problems and limitiations with metadata. 
    I can't explain all that you're seeing.  If you can't figure it out using Exiftool, then I suggest taking a sample pic you've written with LR, upload it to Dropbox or similar, and post the link here; we can take a look.
    The LR metadata fields you mentioned map to these industry-standard fields:
    Title > XMP:Title, IPTC:ObjectName
    Caption, Description > EXIF:ImageDescription, XMP:Description, IPTC:Caption-Abstract
    Headline > XMP:Headline, IPTC:Headline
    User Comment > EXIF:UserComment
    Windows File Explorer doesn't show Headline, and it has somewhat different mappings for Title.  You can experiment for yourself with Exiftool.

  • View modification in ODS after transport to production

    Hi,
    It's possible to see all modification in ODS after transport?
    I would like to see the modification that was done in Navigation Attributes of ODS.
    Thank's
    Cesar G. Batista

    HI
    When you double click on ODS you see a info button(i) click on it it will pop up save and activate button these yo can see the last log.
    Hope this helps!!
    Thanks
    Santosh RC

  • Database Table where modifications to message long text are stored (log)

    Hi,
    As per manual correction mentioned in SAP note 1144291,
    we have changed the long text for message XC092 by modification of the long text.
    This note 1144291 is a pre-requisite for SAP Note 1310808.
    After the notes were implemented, it is noticed that message CURTO1055 has incorrect information in its long text. This is because, the variable in the long text are not correctly defined in the long text.
    Both the messages XC-092 and CURTO1-055 are SAP standard.
    The error for CURTO1-055 can be rectified by modification of the long text and maintenance of the correct variables.
    However, my question is:
    Where do we check the log for document modifcation for a message long text.
    I have found the logs relevant to my modification in table DOKHL and DOKIL.
    But in which table do we get all of the foll. data:
    - Message class
    - Message number
    - Modification name
    - Modification created by
    - Modification done on
    - Last changed by
    - Last changed on
    Kindly help. A <removed by moderator> solution would be really helpful.
    Best Regards,
    Smruthi
    Edited by: Thomas Zloch on May 5, 2011 12:07 PM - urgency reduced

    Hi Smruthi,
    The modification changes would be in the SMODILOG table. Please note this is a core basis table and should not be changed, however to best find your changes search under the TRKORR field with the relevant tp request.
    Best regards,
    Derrick Hurley
    Development Workench

  • Step by Step Instructions for Installing Self Signed Certificate using Certificate Modification Tool

    I am looking for some step by step instructions for installing the self signed certificate from my Microsoft SBS 2003 server on a Treo 755p and 750p.  In particular I need some help with the form of the actual certificate and how to use the Certificate Modification tool. 
    Some questions I have are as follows:
    1. When I install the certificate on a Windows Mobile device I used an exported version of the certificate.  This export is done using the DER x.509 format.  Is that the same form I’ll need for the Palm?  Do I need some other form? Can/should I just use sbscert.cer file that is generated when SBS is configured?
    2. Does the self signed cert need to be installed on the computer being used to update the Palm or do we just need to be able to access the appropriate .CER file?
    3. There are three things included in the PalmCertificatesTool.zip file:
                                    Trusted CAs (folder)
                                    Cert2pdb.exe
                                    PalmCertificates.exe
       How do I use these tools?
    4. It looks like the PalmCertificates.exe file opens an interface that will allow me to browse to the desired .CER file.  Then I suppose I use the < Generate PDB > to create something that needs to then be uploaded to the Palm device?  Not having any real experience with a Palm device how do I upload and install this file? 
    5. Once uploaded do I do something on the device to install it?
    If there is some white paper that provides step by step instructions on doing this that would be great.
    Thanks,
    Walt Bell
    Post relates to: Treo 755p (Verizon)
    Post relates to: Treo 755p (Verizon)

    Thanks for that.
    I have one question after reading the article 43375:
    The article has you "Turn of AutoSync" and then "Reset the device".  It then indicates the device should be left idle. 
    The next step relates to running the PalmCertificates.exe, navigate to the certificate file and add it and then run the < Generate PDB > button.  Should the device be connected to the computer during this process? If so, at what point after the reset do you connect it to the computer?
    Thanks!
    Post relates to: Treo 755p (Verizon)

  • Modification in MB5B prg...material stock between a date range

    Hi experts
    I have to modify mb5b tranx prg . presently we are using date as selection criteria..but now onwards user wants G/L account along with date as selection criteria. I created one selec-option for field HKONT type hkont-bseg. Now in select queries i need ur help ..Kindly tell me where i need to use this field in my select queries to fetch RELEVANT data.
    Regards
    Anu
    CODE:
    REPORT ZRM07MLBD NO STANDARD PAGE HEADING MESSAGE-ID M7 LINE-SIZE 280.
    ********my change*******
    tables : BSEG.
    TYPE-POOLS:  IMREP,                   " Typen Bestandsführungsreporting
                 SLIS.                    " Typen Listviewer
    INCLUDE ZRM07MLDD.
    DATA FLAG(1) TYPE C VALUE ' '.
    DATA BAL_QTY TYPE P DECIMALS 2.
    DATA BAL_AMT TYPE P DECIMALS 2.
    *include:  rm07mldd.     " reportspezifische Datendefinitionen
    "n571473
    define the selection screen here                          "n571473
    "n571473
    SELECTION-SCREEN BEGIN OF BLOCK DATABASE-SELECTION
              WITH FRAME TITLE TEXT-001.
    Text-001: Datenbankabgrenzungen
    SELECT-OPTIONS: MATNR FOR MARD-MATNR MEMORY ID MAT
                                         MATCHCODE OBJECT MAT1,
                    BUKRS FOR T001-BUKRS  MEMORY ID BUK,
                    WERKS FOR T001W-WERKS MEMORY ID WRK,
                    LGORT FOR T001L-LGORT,
                    CHARG FOR MCHB-CHARG,
                    BWTAR FOR MBEW-BWTAR,
                    BWART FOR MSEG-BWART.
    PARAMETERS SOBKZ LIKE MSEG-SOBKZ.
    SELECTION-SCREEN SKIP.
    SELECT-OPTIONS: DATUM FOR MKPF-BUDAT NO-EXTENSION,
    **********my change**************
              HKONT FOR BSEG-HKONT.
    ********END CHANGE************
    SELECTION-SCREEN END OF BLOCK DATABASE-SELECTION.
    SELECTION-SCREEN BEGIN OF BLOCK BESTANDSART
    WITH FRAME TITLE TEXT-002.
    Text-002: Bestandsart
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS LGBST LIKE AM07M-LGBST RADIOBUTTON GROUP BART DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 4(50) TEXT-010 FOR FIELD LGBST.
    Text-010: Lagerort-/Chargenbestand
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS BWBST LIKE AM07M-BWBST RADIOBUTTON GROUP BART.
    SELECTION-SCREEN COMMENT 4(50) TEXT-011 FOR FIELD BWBST.
    Text-011: bewerteter Bestand
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS SBBST LIKE AM07M-SBBST RADIOBUTTON GROUP BART.
    SELECTION-SCREEN COMMENT 4(50) TEXT-012 FOR FIELD SBBST.
    Text-012: Sonderbestand
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK BESTANDSART.
    Commented By Rachit Material group Not Required
    improved definition of parameters for scope of list       "n599218
    *SELECTION-SCREEN BEGIN OF BLOCK MARA WITH FRAME TITLE TEXT-040.
    **selection-screen begin of line.
    *PARAMETERS P_MATKL LIKE MARA-MATKL.
    **selection-screen end of line.
    **SELECTION-SCREEN COMMENT 4(50) TEXT-030 for fieLD s_matkl.
    *SELECTION-SCREEN END OF BLOCK MARA.
    SELECTION-SCREEN BEGIN OF BLOCK LISTUMFANG
      WITH FRAME TITLE TEXT-003.  "Listumfang
    the following 3 parameters became obsolete do not use     "n599218
    anymor. They are still here to inform the user about      "n599218
    that he is using old variants or SUBMIT commands          "n599218
    PARAMETERS :                                                "n599218
      XONUL  LIKE AM07M-XONUL            NO-DISPLAY,            "n599218
      XVBST  LIKE AM07M-XVBST            NO-DISPLAY,            "n599218
      XNVBST LIKE AM07M-XNVBS            NO-DISPLAY.            "n599218
    7 new categories for the scope of list                    "n599218
                                                              "n599218
    cat. I docs I stock on   I    I stock on I Parameter      "n599218
         I      I start date I    I end date I                "n599218
    ---+--+--------++------+--------      "n599218
    1   I yes  I =  zero    I =  I =  zero  I pa_wdzer       "n599218
    2   I yes  I =  zero    I <> I <> zero  I pa_wdzew       "n599218
    3   I yes  I <> zero    I <> I =  zero  I pa_wdwiz       "n599218
    4   I yes  I <> zero    I <> I <> zero  I pa_wdwuw       "n599218
    5   I yes  I <> zero    I =  I <> zero  I pa_wdwew       "n599218
         I      I            I    I          I                "n599218
    6   I no   I =  zero    I =  I =  zero  I pa_ndzer       "n599218
    7   I no   I <> zero    I =  I <> zero  I pa_ndsto       "n599218
                                                              "n599218
    definition of the pushbutton : show or hide the following "n599218
    parameters for the scope of list                          "n599218
    SELECTION-SCREEN PUSHBUTTON /1(20) PB_LIU                   "n599218
                               USER-COMMAND LIU.                "n599218
                                                                "n599218
    text line : materials with movements                      "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN COMMENT 1(55) TEXT-072                     "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    with movements / start = zero  =  end = zero              "n599218
    1   I yes  I =  zero    I =  I =  zero  I pa_wdzer       "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN POSITION 2.                                "n599218
    PARAMETERS : PA_WDZER    LIKE AM07M-MB5B_XONUL              "n599218
                             MODIF ID LIU.                      "n599218
      text-083 : no opening stock ; no closing stock          "n599218
    SELECTION-SCREEN COMMENT 5(70) TEXT-083                     "n599218
                             FOR FIELD PA_WDZER                 "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    with movements / start = zero  =  end <> zero             "n599218
    2   I yes  I =  zero    I <> I <> zero  I pa_wdzew       "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN POSITION 2.                                "n599218
    PARAMETERS : PA_WDZEW    LIKE AM07M-MB5B_XONUL              "n599218
                             MODIF ID LIU.                      "n599218
      text-084 : no opening stock ; with closing stock        "n599218
    SELECTION-SCREEN COMMENT 5(70) TEXT-084                     "n599218
                             FOR FIELD PA_WDZEW                 "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    with movements / start stock <> 0 / end stock = 0         "n599218
    3   I yes  I <> zero    I <> I =  zero  I pa_wdwiz       "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN POSITION 2.                                "n599218
    PARAMETERS : PA_WDWIZ    LIKE AM07M-MB5B_XONUL              "n599218
                             MODIF ID LIU.                      "n599218
      text-085 : with opening stock ; no closing stock        "n599218
    SELECTION-SCREEN COMMENT 5(70) TEXT-085                     "n599218
                             FOR FIELD PA_WDWIZ                 "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    with movements / with start and end stocks / different    "n599218
    4   I yes  I <> zero    I <> I <> zero  I pa_wdwuw       "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN POSITION 2.                                "n599218
    PARAMETERS : PA_WDWUW    LIKE AM07M-MB5B_XONUL              "n599218
                             MODIF ID LIU.                      "n599218
      with opening stock ; with closing stock ; changed       "n599218
    SELECTION-SCREEN COMMENT 5(70) TEXT-086                     "n599218
                             FOR FIELD PA_WDWUW                 "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    with movements / with start and end stock / equal         "n599218
    5   I yes  I <> zero    I =  I <> zero  I pa_wdwew       "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN POSITION 2.                                "n599218
    PARAMETERS : PA_WDWEW    LIKE AM07M-MB5B_XONUL              "n599218
                             MODIF ID LIU.                      "n599218
      with opening stock ; with closing stock ; non-changed   "n599218
    SELECTION-SCREEN COMMENT 5(70) TEXT-087                     "n599218
                             FOR FIELD PA_WDWEW                 "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    text line : materials without movements                   "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN COMMENT 1(55) TEXT-073                     "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    materials without movements / stocks = zero               "n599218
    6   I no   I =  zero    I =  I =  zero  I pa_ndzer       "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN POSITION 2.                                "n599218
    PARAMETERS : PA_NDZER    LIKE AM07M-MB5B_XONUL              "n599218
                             MODIF ID LIU.                      "n599218
      text-083 : no opening stock ; no closing stock          "n599218
    SELECTION-SCREEN COMMENT 5(70) TEXT-083                     "n599218
                             FOR FIELD PA_NDZER                 "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    materials without movements / with start or end stock     "n599218
    7   I no   I <> zero    I =  I <> zero  I pa_ndsto       "n599218
    SELECTION-SCREEN BEGIN OF LINE.                             "n599218
    SELECTION-SCREEN POSITION 2.                                "n599218
    PARAMETERS : PA_NDSTO    LIKE AM07M-MB5B_XONUL              "n599218
                             MODIF ID LIU.                      "n599218
      with opening stock ; with closing stock ; non-changed   "n599218
    SELECTION-SCREEN COMMENT 5(70) TEXT-087                     "n599218
                             FOR FIELD PA_NDSTO                 "n599218
                             MODIF ID LIU.                      "n599218
    SELECTION-SCREEN END OF LINE.                               "n599218
                                                                "n599218
    SELECTION-SCREEN END OF BLOCK LISTUMFANG.
    SELECTION-SCREEN BEGIN OF BLOCK EINSTELLUNGEN
       WITH FRAME TITLE TEXT-068.  "Settings
    parameter for totals only - hierseq. list
    corresponding display variant
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 1.
    PARAMETERS XSUM          LIKE AM07M-XSUM.
    SELECTION-SCREEN COMMENT 4(60) TEXT-090 FOR FIELD XSUM.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(30) TEXT-091 FOR FIELD PA_SUVAR.
    *Commented by Rachit
    SELECTION-SCREEN POSITION 40.
    PARAMETERS: PA_SUVAR LIKE DISVARIANT-VARIANT.
    SELECTION-SCREEN END OF LINE.
    parameter for totals only - flat list + corresponding display variant
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 1.
    PARAMETERS PA_SUMFL LIKE AM07M-XSUM.
    SELECTION-SCREEN COMMENT 4(60) TEXT-092 FOR FIELD PA_SUMFL.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 5(30) TEXT-091 FOR FIELD PA_SFLVA.
    SELECTION-SCREEN POSITION 40.
    PARAMETERS: PA_SFLVA LIKE DISVARIANT-VARIANT.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 1.
    PARAMETERS XCHAR LIKE AM07M-XCHRG.
    SELECTION-SCREEN COMMENT 4(50) TEXT-015 FOR FIELD XCHAR.
    Text-015: nur chargenpflichtige Materialien
    Das Kennzeichen 'xchar' bestimmt die Art der Listausgabe entweder
    auf Material- oder Chargenebene.
    SELECTION-SCREEN END OF LINE.
    the function "No reversal movements" is only         "n571473
    available from relaese 4.5B and higher               "n571473
    ( TEXT-026 : No reversal movements )                 "n571473
    SELECTION-SCREEN BEGIN OF LINE.                             "n571473
    SELECTION-SCREEN POSITION 1.                                "n571473
    PARAMETERS NOSTO LIKE AM07M-NOSTO.                          "n571473
    SELECTION-SCREEN COMMENT 4(50) TEXT-026                     "n571473
                           FOR FIELD NOSTO.                     "n571473
    SELECTION-SCREEN END OF LINE.                               "n571473
    SELECTION-SCREEN END OF BLOCK EINSTELLUNGEN.
    *Rachit
    SELECTION-SCREEN BEGIN OF BLOCK LISTE WITH FRAME TITLE TEXT-040.
    PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT.
    SELECTION-SCREEN END OF BLOCK LISTE.
    HAUPTPROGRAMM *********************************
    F4-Hilfe für Reportvariante -
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
      PERFORM F4_FOR_VARIANT.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR PA_SFLVA.
      PERFORM                    VARIANT_VALUE_REQUEST_F4
                                 USING  PA_SFLVA  G_S_VARI_SUMFL.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR PA_SUVAR.
      PERFORM                    VARIANT_VALUE_REQUEST_F4
                                 USING  PA_SUVAR G_S_VARI_SUMHQ.
    "n599218
    INITIALIZATION                                            "n599218
    "n599218
                                                                "n599218
    INITIALIZATION.
      CLEAR : G_S_VARI_SUMHQ, G_S_VARI_SUMFL.
      REPID = SY-REPID.
      VARIANT_SAVE = 'A'.
    preprae the working areas for the variants
      MOVE  : REPID              TO  G_S_VARI_SUMHQ-REPORT,
              'SUHQ'             TO  G_S_VARI_SUMHQ-HANDLE,
              REPID              TO  G_S_VARI_SUMFL-REPORT,
              'SUFL'             TO  G_S_VARI_SUMFL-HANDLE.
      MOVE-CORRESPONDING : G_S_VARI_SUMHQ  TO  G_S_VARI_SUMHQ_DEF,
                           G_S_VARI_SUMFL  TO  G_S_VARI_SUMFL_DEF.
      PERFORM  GET_THE_DEFAULT_VARIANT
                                 USING  PA_SFLVA
                                        G_S_VARI_SUMFL
                                        G_S_VARI_SUMFL_DEF.
      PERFORM  GET_THE_DEFAULT_VARIANT
                                 USING  PA_SUVAR
                                        G_S_VARI_SUMHQ
                                        G_S_VARI_SUMHQ_DEF.
      PERFORM INITIALISIERUNG.
    get the parameters from the last run                      "n547170
      PERFORM                    ESDUS_GET_PARAMETERS.          "n547170
    set flag when INITILIZATION is processed
      MOVE  'X'        TO  G_FLAG_INITIALIZATION.
    "n599218
    AT SELECTION-SCREEN                                       "n599218
    "n599218
    Prüfung der eingegebenen Selektionsparameter, -
    Berechtigungsprüfung -
    AT SELECTION-SCREEN.
    the following 3 parameters XONUL, XVBST, and XNVBST       "n599218
    became obsolete; send error when they should be filled.   "n599218
    This could be possible if the user works with old         "n599218
    selection variants or this report is launched by a        "n599218
    SUBMIT command                                            "n599218
      IF  XONUL  IS INITIAL  AND                                "n599218
          XVBST  IS INITIAL  AND                                "n599218
          XNVBST IS INITIAL.                                    "n599218
    ok, the old parameters are empty                         "n599218
      ELSE.                                                     "n599218
      text-088 : note 599218 : obsolete parameter used        "n599218
        MESSAGE E895             WITH  TEXT-088.                "n599218
      ENDIF.
    did the user hit the pushbutton "Category" ?              "n599218
      CASE     SSCRFIELDS-UCOMM.                                "n599218
        WHEN  'LIU '.                                           "n599218
        yes, the pushbutton "Category" was hit                "n599218
          IF  G_FLAG_STATUS_LIU  =  C_HIDE.                     "n599218
          show the 7 parameters on the selection srceen       "n599218
            MOVE  C_SHOW         TO  G_FLAG_STATUS_LIU.         "n599218
          ELSE.                                                 "n599218
          hide the 7 paramaters                               "n599218
            MOVE  C_HIDE         TO  G_FLAG_STATUS_LIU.         "n599218
          ENDIF.                                                "n599218
      ENDCASE.                                                  "n599218
                                                                "n599218
    go on only if the user wants to launch this report        "n599218
      CHECK : SY-UCOMM = 'ONLI'  OR                             "n599218
              SY-UCOMM = 'PRIN'  OR                             "n599218
              SY-UCOMM = 'SJOB'.                                "n599218
    only one sum function can be processed
      IF  XSUM     = 'X' AND
          PA_SUMFL = 'X'.
        SET CURSOR               FIELD 'XSUM'.
      select one sum list only
        MESSAGE  E895            WITH  TEXT-093.
      ENDIF.
      PERFORM EINGABEN_PRUEFEN.
      SET CURSOR                 FIELD 'PA_SFLVA'.
      PERFORM  VARIANT_CHECK_EXISTENCE
                                 USING     PA_SFLVA
                                           G_S_VARI_SUMFL
                                           G_S_VARI_SUMFL_DEF.
      SET CURSOR                 FIELD 'PA_SUVAR'.
      PERFORM  VARIANT_CHECK_EXISTENCE
                                 USING     PA_SUVAR
                                           G_S_VARI_SUMHQ
                                           G_S_VARI_SUMHQ_DEF.
    check whether FI summarization is active and other        "n547170
    restrictions could deliver wrong results                  "n547170
      PERFORM                    F0800_CHECK_RESTRICTIONS.      "n547170
    - the user wants to surpress the reversal movements :     "n497992
      process warning M7 392                                  "n497992
      IF NOT NOSTO IS INITIAL.                                  "n497992
      emerge warning ?                                        "n497992
        CALL FUNCTION            'ME_CHECK_T160M'               "n497992
            EXPORTING                                           "n497992
              I_ARBGB          = 'M7'                           "n497992
              I_MSGNR          = '392'                          "n497992
            EXCEPTIONS                                          "n497992
              NOTHING          = 0                              "n497992
              OTHERS           = 1.                             "n497992
                                                                "n497992
        IF SY-SUBRC <> 0.                                       "n497992
          SET CURSOR               FIELD  'NOSTO'.              "n497992
          to surpress the reversal movements could cause ...  "n497992
          MESSAGE                  W392.                        "n497992
        ENDIF.                                                  "n497992
      ENDIF.                                                    "n497992
    carry out special authotity check for the tax auditor     "n547170
      PERFORM                    TPC_CHECK_TAX_AUDITOR.         "n547170
    does the user wants a selection via company code or a plant ?
    fill range table g_ra_werks
      REFRESH : G_RA_BWKEY,  G_RA_WERKS, G_T_ORGAN.
      CLEAR   : G_RA_BWKEY,  G_RA_WERKS, G_T_ORGAN, G_S_ORGAN.
      REFRESH : G_0000_RA_BWKEY,  G_0000_RA_WERKS,  G_0000_RA_BUKRS.
      CLEAR   : G_0000_RA_BWKEY,  G_0000_RA_WERKS,  G_0000_RA_BUKRS.
      DESCRIBE TABLE  BUKRS      LINES  G_F_CNT_LINES_BUKRS.
      DESCRIBE TABLE  WERKS      LINES  G_F_CNT_LINES_WERKS.
      IF  G_F_CNT_LINES_BUKRS  > 0  OR
          G_F_CNT_LINES_WERKS  > 0.
      fill range tables for the CREATION OF TABLE G_T_ORGAN
        MOVE : WERKS[]           TO  G_0000_RA_WERKS[],
               BUKRS[]           TO  G_0000_RA_BUKRS[].
        PERFORM  F0000_CREATE_TABLE_G_T_ORGAN
                                 USING  C_ERROR.
      ENDIF.
    save the parameters of this run                           "n547170
      PERFORM                    ESDUS_SAVE_PARAMETERS.         "n547170
    "n599218
    AT SELECTION-SCREEN OUTPUT                                "n599218
    "n599218
                                                                "n599218
    AT SELECTION-SCREEN OUTPUT.                                 "n599218
                                                                "n599218
      IF  G_FLAG_INITIALIZATION IS INITIAL.                     "n599218
      the process time INITIALIZATION was not done, so        "n599218
      carry out the functions here                            "n599218
        MOVE  'X'                TO G_FLAG_INITIALIZATION.      "n599218
                                                                "n599218
        PERFORM                  INITIALISIERUNG.               "n599218
                                                                "n599218
      get the parameters from the last run                    "n599218
        PERFORM                  ESDUS_GET_PARAMETERS.          "n599218
      ENDIF.                                                    "n599218
                                                                "n599218
    how to handle the 7 paramaters for the scope of list ?    "n599218
      LOOP AT SCREEN.                                           "n599218
      modify the selection screen                             "n599218
        CASE    SCREEN-GROUP1.                                  "n599218
          WHEN  'LIU'.                                          "n599218
            IF  G_FLAG_STATUS_LIU  = C_SHOW.                    "n599218
              SCREEN-ACTIVE = '1'.         "show parameters     "n599218
            ELSE.                                               "n599218
              SCREEN-ACTIVE = '0'.         "Hide parameters     "n599218
            ENDIF.                                              "n599218
                                                                "n599218
            MODIFY SCREEN.                                      "n599218
        ENDCASE.                                                "n599218
      ENDLOOP.                                                  "n599218
                                                                "n599218
    adapt the icon on the pushbutton depending on the status  "n599218
      CASE    G_FLAG_STATUS_LIU.                                "n599218
        WHEN  C_HIDE.                                           "n599218
          MOVE  TEXT-081         TO  PB_LIU.  "@0EQ@ Scope ... "n599218
        WHEN  C_SHOW.                                           "n599218
          MOVE  TEXT-082         TO  PB_LIU.  "@0HQ@ Scope ... "n599218
        WHEN  OTHERS.                                           "n599218
      ENDCASE.                                                  "n599218
                                                                "n599218
    "n599218
    START-OF-SELECTION
    START-OF-SELECTION.
    *SET PF-STATUS 'TEST'.
    create the title line
    If no date is given at all, the range is set to the maximum
    extend (1.1.0000 - 31.12.9999).
    If only datum-low is set, it is interpreted as the day for
    which the analysis is wanted --> datum-high is filled up.
      IF DATUM-LOW IS INITIAL.
        DATUM-LOW = '00000101'.
        IF DATUM-HIGH IS INITIAL.
          DATUM-HIGH = '99991231'.
        ENDIF.
      ELSE.
        IF DATUM-HIGH IS INITIAL.
          DATUM-HIGH = DATUM-LOW.
        ENDIF.
      ENDIF.
      MOVE: DATUM-LOW(4)    TO JAHRLOW,
            DATUM-LOW+4(2)  TO MONATLOW,
            DATUM-LOW+6(2)  TO TAGLOW,
            DATUM-HIGH(4)   TO JAHRHIGH,
            DATUM-HIGH+4(2) TO MONATHIGH,
            DATUM-HIGH+6(2) TO TAGHIGH.
      SET TITLEBAR 'MAN'
      WITH TAGLOW MONATLOW JAHRLOW TAGHIGH MONATHIGH JAHRHIGH.
    create the headlines using the titelbar                   "n599218
      PERFORM                    CREATE_HEADLINE.               "n599218
    calculate the offsets for the list header
      PERFORM                    CALCULATE_OFFSETS.
    for the representation of tied empties                    "n547170
      PERFORM                    F0700_PREPARE_TIED_EMPTIES.    "n547170
    create table g_t_mseg_fields with the names of all
    wanted fields from MSEG and MKPF
      PERFORM                    F0300_GET_FIELDS.
    set a break-point : is IS-OIL active ?                    "n599218 A
                                                                "n599218 A
    check whether this is a IS-OIL system                     "n599218 A
      PERFORM                    CHECK_IS_OIL_SYSTEM.           "n599218 A
                                                                "n599218 A
      IF  G_FLAG_IS_OIL_ACTIVE = 'X'.           "IS-OIL ?       "n599218 A
      the 2 IS-OIL specific data fields will be inserted into "n599218 A
      working table G_T_MSEG_FIELDS. Then these fields will   "n599218 A
      transported from database table MSEG, too               "n599218 A
        APPEND  'MSEG~OIGLCALC'  TO  G_T_MSEG_FIELDS.           "n599218 A
        APPEND  'MSEG~OIGLSKU'   TO  G_T_MSEG_FIELDS.           "n599218 A
      ENDIF.                                                    "n599218 A
    create the ALV fieldcatalog for the main list always
      MOVE  'G_T_BELEGE'         TO  G_F_TABNAME.
      PERFORM                    F0400_CREATE_FIELDCAT.
    do not print the ALV-statistics and selection criteria
      CLEAR                      G_S_PRINT.
      G_S_PRINT-NO_PRINT_SELINFOS   = 'X'.
      G_S_PRINT-NO_PRINT_LISTINFOS = 'X'."
    create the range table for the storage location
      PERFORM                    F0600_CREATE_RANGE_LGORT.
    - show the current activity and the progress              "n599218
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'                 "n599218
        EXPORTING                                               "n599218
          TEXT = TEXT-063.       "Reading current stocks        "n599218
    get the stock tables
      PERFORM                    AKTUELLE_BESTAENDE.
      PERFORM TABELLEN_LESEN.
    - show the current activity and the progress              "n599218
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'                 "n599218
        EXPORTING                                               "n599218
          TEXT = TEXT-064.       "Reading MM documents          "n599218
      PERFORM                    F1000_SELECT_MSEG_MKPF.
      PERFORM                    BELEGSELEKTION.
    END-OF-SELECTION
    END-OF-SELECTION.
    results of all the autority checks
      PERFORM                    F9100_AUTH_PLANT_RESULT.
    - show the current activity and the progress              "n599218
      IF BWBST = 'X'.                                           "n599218
        CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'               "n599218
          EXPORTING                                             "n599218
            TEXT = TEXT-066.     "Calculating Stocks and Values "n599218
      ELSE.                                                     "n599218
        CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'               "n599218
          EXPORTING                                             "n599218
            TEXT = TEXT-067.     "Calculating Stocks            "n599218
      ENDIF.                                                    "n599218
      PERFORM SUMMEN_BILDEN.
      PERFORM BESTAENDE_BERECHNEN.
      PERFORM LISTUMFANG.
    - show the current activity and the progress              "n599218
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'                 "n599218
        EXPORTING                                               "n599218
          TEXT = TEXT-065.       "Preparing list output         "n599218
    stop if table bestand is empty
      LOOP AT BESTAND.
        SELECT SINGLE MATKL FROM MARA INTO CORRESPONDING FIELDS OF BESTAND
        WHERE
         MATNR = BESTAND-MATNR.
        MODIFY BESTAND INDEX SY-TABIX.
      ENDLOOP.
      DESCRIBE TABLE BESTAND     LINES G_F_CNT_LINES.
      IF  G_F_CNT_LINES IS INITIAL.
      Keinen Eintrag zu den Suchbegriffen gefunden/selektiert
        MESSAGE                  S083.
      perform                  anforderungsbild.
      ELSE.
      process log function if the use is a tax auditor        "n555246
      and the database selection was successful               "n555246
        IF  G_FLAG_TPCUSER = '1'.                               "n555246
          PERFORM                TPC_WRITE_LOG.                 "n555246
        ENDIF.                                                  "n555246
        PERFORM FELDGRUPPEN_AUFBAUEN.
      sort table with header data per material
        IF BWBST IS INITIAL.
          SORT BESTAND BY MATNR WERKS CHARG.
        ELSE.
          SORT BESTAND BY MATNR BWKEY.
        ENDIF.
      which function does the user want ?
        IF      XSUM = 'X'.
        hierseq. alv with sums
          PERFORM                CREATE_TABLE_TOTALS_HQ.
          PERFORM                CREATE_FIELDCAT_TOTALS_HQ.
          PERFORM                ALV_HIERSEQ_LIST_TOTALS.
        ENDIF.
        IF FLAG NE 'X'.
          IF PA_SUMFL = 'X'.
       elseif  pa_sumfl = 'X'.
        show the sums only in a flat ALV
            PERFORM                CREATE_TABLE_TOTALS_FLAT.
            PERFORM                CREATE_FIELDCAT_TOTALS_FLAT.
            PERFORM                ALV_FLAT_LIST_SUMS_ONLY.
          ELSE.
        display the full list using the APPEND ALV
         PERFORM                BESTAENDE_AUSGEBEN.
          ENDIF.
        ENDIF.
        FLAG = ' '.
      ENDIF.
      CLEAR: G_T_MSEG_LEAN, G_T_BSIM_LEAN, BESTAND.             "n443935
    *&   PF_STATUS_SET_TOTALS
    FORM PF_STATUS_SET_TOTALS                                   "#EC CALLED
                       USING     EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'STANDARD'   EXCLUDING EXTAB.
    ENDFORM.                     "PF_STATUS_SET_TOTALS
       user_parameters_save
    FORM USER_PARAMETERS_SAVE.
      GET PARAMETER ID 'BUK'     FIELD  G_SAVE_PARAMS-BUKRS.
      GET PARAMETER ID 'WRK'     FIELD  G_SAVE_PARAMS-WERKS.
      GET PARAMETER ID 'MAT'     FIELD  G_SAVE_PARAMS-MATNR.
      GET PARAMETER ID 'CHA'     FIELD  G_SAVE_PARAMS-CHARG.
      GET PARAMETER ID 'BLN'     FIELD  G_SAVE_PARAMS-BELNR.
      GET PARAMETER ID 'BUK'     FIELD  G_SAVE_PARAMS-BUKRS.
      GET PARAMETER ID 'GJR'     FIELD  G_SAVE_PARAMS-GJAHR.
    ENDFORM.                     "user_parameters_save
       user_parameters_restore
    FORM USER_PARAMETERS_RESTORE.
      SET PARAMETER ID 'BUK'     FIELD  G_SAVE_PARAMS-BUKRS.
      SET PARAMETER ID 'WRK'     FIELD  G_SAVE_PARAMS-WERKS.
      SET PARAMETER ID 'MAT'     FIELD  G_SAVE_PARAMS-MATNR.
      SET PARAMETER ID 'CHA'     FIELD  G_SAVE_PARAMS-CHARG.
      GET PARAMETER ID 'BLN'     FIELD  G_SAVE_PARAMS-BELNR.
      GET PARAMETER ID 'BUK'     FIELD  G_SAVE_PARAMS-BUKRS.
      GET PARAMETER ID 'GJR'     FIELD  G_SAVE_PARAMS-GJAHR.
    ENDFORM.                     "user_parameters_restore
    *&   USER_COMMAND_TOTALS
    FORM USER_COMMAND_TOTALS                                    "#EC CALLED
                       USING     R_UCOMM     LIKE  SY-UCOMM
                                 RS_SELFIELD TYPE  SLIS_SELFIELD.
      CLEAR                      G_S_BESTAND_KEY.
      CASE R_UCOMM.
        WHEN '&GRPT'.
          SORT BESTAND BY BWKEY MATKL.
          FLAG = 'X'.
          PERFORM GRP_TOTAL(ZGRP_TOTAL) TABLES BESTAND.
          IF FLAG = 'X'.
            EXIT.
          ENDIF.
        WHEN '&STR'.
          IF BWBST = 'X'.
            IF FLAG = 'X'.
        clear: LGBST,BWBST ,SBBST.
          PERFORM GRP_TOTAL(ZGRP_TOTAL1) TABLES BESTAND.
              SUBMIT ZRM07MLBD2 WITH  LGBST = 'X'
                               WITH WERKS = '1000'
                               WITH BUKRS = '1001'
                               WITH XSUM = 'X'
                               WITH PA_WDZER =  PA_WDZER
                               WITH PA_WDZEW = PA_WDZEW
                               WITH PA_WDWIZ = PA_WDWIZ
                               WITH PA_WDWUW = PA_WDWUW
                               WITH PA_WDWEW = PA_WDWEW
                               WITH PA_NDZER = PA_NDZER
                               WITH PA_NDSTO = PA_NDSTO
                               WITH LGORT IN LGORT
                               WITH DATUM IN DATUM
                               WITH MATNR IN MATNR VIA SELECTION-SCREEN
                                                       AND RETURN.
              CLEAR:      LGBST.
            ELSE.
              MESSAGE E345(0) WITH 'First see the grp total'.
            ENDIF.
          ELSE.
            MESSAGE E345(0) WITH 'Stock type chosen was not valuated'.
          ENDIF.
    Quarter Ending----
        WHEN '&QTRE'.
          TYPES: BEGIN OF TY_MTART,
                  MATNR LIKE MARA-MATNR,
                  MTART LIKE MARA-MTART,
                 END OF TY_MTART.
          DATA: L_REC_QTY TYPE P DECIMALS 3,
                L_ISS_QTY TYPE P DECIMALS 3,
                L_REC_AMT TYPE P DECIMALS 3,
                L_ISS_AMT TYPE P DECIMALS 3,
                L_OTHERS_QTY TYPE P DECIMALS 3,
                L_SALE_QTY TYPE P DECIMALS 3,
                L_SALE_AMT TYPE P DECIMALS 3,
                L_OTHERS_AMT TYPE P DECIMALS 3.
          DATA: IT_MAKT TYPE STANDARD TABLE OF MAKT WITH HEADER LINE,
                IT_T023T TYPE STANDARD TABLE OF T023T WITH HEADER LINE,
                IT_T134 TYPE STANDARD TABLE OF T134T WITH HEADER LINE.
          DATA: IT_MTART TYPE STANDARD TABLE OF TY_MTART WITH HEADER LINE.

    Dear Experts,
    Thanks all for the reply.
    I have followed the OSS notes 194788
    Only enter the selection criteria which are required for the selection of the stock management unit for which the opening stock balance and closing stock should be determined.
    In MB5B I key in selection criteria which are :
    material number : xxxxxx
    company code : 1000
    plant : 1500
    batch : xxxxxx
    special stock indicator : orders on hand
    selection date : 01.08.2009 to current date
    stock type :special stock
    and the result comes out :
    there is initial balance of 3000 kg on 01.08.2009 - INCORRECT ( our team never enter this initial balance but still came out )
    therefore the stock of current date also WRONG
    if the total stock is adjusted using stock take , the accounting journal will be created, and reduce the financial asset with the same amount of 3000 kg (WRONG EFFECT)
    how to solve this issue without affecting the accounting journal ?
    Thanks
    Pauline

  • Secure receivables field is not getting updated in FD32

    Hi All,
    I have created an LC for a customer & assigned the LC in the sales order. The system does not consider the LC amount as credit exposure which is a correct behaviour. When I post the Invoice the system does not populate any value in the secured receivables field in FD32 which should ideally haapen after posting the invoice.
    Please guide me if I am missing anything.
    Thanks In advance for your efforts.
    Regards,
    Sulabh

    Hi,
    Found the ans by myself.
    As these are the secured receivables, so after generating  invoice, the invoice amount sit under secure receivable as this amount is secured with LC attached in sales order.
    Regards,
    Sulabh

  • Modification to a WebSite by using IWeb

    Hope somebody will be able to help me. I have to modify information on a website. My question, how to do the modifications by using Iweb. Thank you.

    Welcome to the Apple Discussions. Was the website created with iWeb. If not then there's no way to make modifications to it.
    If iWeb was used to create the web site then you should be able to launch iWeb, make the changes and publish them.
    OT

  • File window not updating modif. dates – and mysterious parallel universe discovered

    The day started innocently enough when I tried to edit some <meta> content on a site I'm building and then saved my work. Little did I know...
    DW's "File" window refused to update the "Modified" column of the files I worked on.  Open and closing the files shows that my changes have been recognized and incorporated into the HTML, and the files show up with correct modification dates in Finder (I'm on a Mac). They just won't change date in DW.
    When I upload the modified-but-not-redated-in-DreamWeaver files to my remote site, they appear with the incorrect dates on the server, but a text comparison in DW shows that my local and remote files are synched.
    Now for the truly weird part: when I run the site in Safari (after flushing its cache), a Source check shows the old code is still operational.  (I also changed the titles of the pages in question to quickly confirm which version was being displayed. This check shows the old title displayed.)
    Here's the site address:  http://www.bearriverbooks.com/index.html
    Now for the truly, truly wierd part.  I have a parallel site ( http://www.queen-of-the-northern-mines.com/index.html ) which contains copies of the bearriverbooks.com files. These files, too, show the wrong modification dates in DW's "Files" window and on the remote server – but they display correctly. Anyone who wants to check can compare page titles, which are longer in the later pages with correct code.
    I checked the remote site addresses in the "Manage Sites..." center.  I have not crossed my wires there (though I can smell a few arcing badly in my brain.).
    The players:  2.8 GHz Intel Core i5 27" iMac running Mac OSX 10.6.7  /  Dreamweaver CS5 v.11.0 Build 4964
    Thanks in advance,
    Richard Hurley
    Grass Valley MultiMedia

    I am having the same issue on a Mac 3.4Ghz i7 running Mac OS 10.7.  I have Dreamweaver CS 5.5 v.11.5 Build 5344.
    I have a linux webserver, running ProFTPD v.1.3.1
    Both my mac and my linux server are set to the correct date and time.
    And ls on the linux servers tells me the files have the correct modified date and time, but this is getting lost in translation to dreamweaver when I view the remove server in the File tab.
    Any help appreciated.

Maybe you are looking for