Modification of email settings for enhance security - Are they Manditory?

Verizon's 12/21/2011 email says: "you will need to modify your email settings to take advantage of enhanced security"
If I'm not currently concerned about email security, can I just leave things as they are? 
Is Verizon going to force me to transition to the more secure settings at some time in the future, and if so, by when?
I use Thunderbird for my email... must all of the changes (incoming port / outgoing port / encryption ) be made simultaneously.  I have noted that if I just try to transition outgoing port 587 to the now recommended 465, outgoing mail does not work.

Good Morning,
Here is some information below that can help you. Unfortunately at this time these are the changes we do not have any date or can advise if this is "mandatory", however it is required at this time.
http://www22.verizon.com/residentialhelp/fiosinternet/email/setup+and+use/questionsone/124274.htm?
http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124322.htm
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

  • The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

    i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
    with the above error message.

    Hi,
    I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
    It may result from your Anti-Virus. Please refer to the following steps:
    Open MCAfee Console and go to Access Protection window.
    Click Anti-Virus Standard Protection and edit “prevent mass mailing 
    worms from sending emails” rule.
    Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
    C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
    you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
    Reset the IIS And SharePoint Timer service to check if this works for you.
    Here are some similar issues with you, you can use as a reference:
    http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
    http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
    Best Regards,
    Lisa chen

  • HT4352 I can not find any settings for iTunes where are they?

    I have set up home sharing on my Apple TV and now I am supposed to turn on home sharing on my ipad. There are no settings in iTunes on my ipad. I have spent hours looking for them, they donotexist. I have all sorts of options to look formusicandmovies and photos butthere is no"advanced" settings, and thereis no "file - settings - advanced". There is also no setting forhomesharing, no icons. I can not find any of these options the help files are talking about. Can some one please tell me how to find the settings in iTunes on my ipad.

    now I am supposed to turn on home sharing on my ipad.
    Where did you see this ?
    But it is Settings > Music (or Videos) - Home Sharing.
    Can some one please tell me how to find the settings in iTunes on my ipad
    It is not in iTunes on your iPad.
    I have all sorts of options to look formusicandmovies and photos butthere is no"advanced" settings, and thereis no "file - settings - advanced".
    Because it is in iTunes on your computer because that is what AppleTV uses to play videos.
    Notice the paragraph heading and paragraph 2
    Setting up Home Sharing in iTunes on your computer
    Make sure you're using the latest version of iTunes.
    Mac: Choose iTunes > Check for Updates.Windows: Choose Help > Check for Updates.
    Choose File > Home Sharing > Turn On Home Sharing.
    Note: If you're using iTunes 10.7 or earlier, choose Advanced > Turn on Home Sharing.

  • What are the email settings for mac mail

    what are the email settings for mac mail

    If you mean iCloud email, you can automatically configure this on your Mac runnint Mountain Lion by going to System Preferences>iCloud, signing into your iCloud account and checking Mail.  To manually configure it, use these settings: http://support.apple.com/kb/HT4864.

  • The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

    I have a 2 server SharePoint farm.
    All outgoing emails were working fine.
    I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
    The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Even if I setup Alert on some list, it doesn't send email.
    I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
    What could be the cause of this and how to fix it?
    EDIT
    I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

    This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
    AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
    I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

  • My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

    My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
    Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
    I do not have any VPN enabled?

    Do you happen to have an Android?  If so and depending on what version there is a great data usage analyse tool built-in.  See if you can go to Settings -> Data Usage  from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

  • Registry settings for burning cd are missing

    I am unable to burn CD from my playlist get response "registry settings for burning CD are missing"  I tried to reinstall I tunes twice but get the same response

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

    Hi,
    I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
    with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
    in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
    Any help please?

    Hi,
    According to your post, my understanding is that you failed to send email after building a fresh site collection.
    I recommend to verify that you have entered your SMTP server name correctly.
    You can add it as FQDN e.g. ServerName.DomainName.
    Here are a similar articles for your reference:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
    http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
    Best Regards,
    Linda
    Linda Li
    TechNet Community Support

  • BT email settings for iPhone 5?

    Need BT email settings for my iPhone 5, old settings they are not working anymore.

    Go to the BT website and search for them there.

  • New email settings for Mac Mail & 3rd party...

    Anyone have instructions for new email port settings for users who are:
    -Using Mac Mail
    -Using third mail email service provider (i.e., not sending and receiving through a Verizon address)
    Thanks,
    Pardon me while I rant (I'm hoping a Verizon employee reads this)...
    I use my third party email account exclusively. It's listed on my verizon account page. So, does verizon do the logical thing and send announcements to my third party email address (?) - of course not, they send them to the verizon address which I have never once used in years.
    New port settings for some email users...
    I got a phone call from an automated Verizon attendant telling me to check the following for new port settings for some email users:
    http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124333.htm
    I guess Verizon hasn't heard that there are millions of people using Mac computers, with Mac Mail as their email clients. And, some of these users are using obscure third party email service providers with names like 'Google'. On the above linked page, there are no instructions for these users.
    I tried to use the online live support feature to get a clarification about using the new port settings. A polite gentleman with a long Indian name told me he couldn't help me and gave me an 800 number to call. After calling the 800 number, a nice lady in the Philippines (on a terrible voice connection) told me she couldn't help me - she transferred me to another department where I waited and waited and waited. I finally had to hang up.
    I'm beginning to think that Verizon is a division of the United States Postal Service. Come to think of it, I get much better service from the USPS than I get from Verizon.

    Are you using the Mac Mail client or Verizon's netmail?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • How to fix "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."

    Hi All,
    I have move dev to production, then workflow facing "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly". Actually it is working fine in dev, in production mail not going. How to fix
    this issue?
    Thanks  in advance! 

    make sure your outgoing email settings are correct and also make sure servers are in exchange rely if you are using exchange.http://sharepoint.stackexchange.com/questions/35353/how-to-handle-e-mail-message-cannot-be-sent-error
    check below blogs: http://www.chrisbuchanan.ca/Blog/Lists/Posts/Post.aspx?ID=2
    another option to put pause in right place:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/6e848a25-019d-4220-aff6-c535da933e0f/the-error-message-in-workflow-history-the-email-message-cannot-be-sent
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • DM3.0 EA2: Settings for "View Details" are not saved

    Hi,
    normally I want to see only the attributes and keys in logical model.
    I can change the settings at "View Details" to "Attributes" and "Keys" and the view is changing. When I close data modeler, start it again and open the recend data model, the settings are again on default "All details".
    Is this the standard or should the view settings be saved?
    I am running Data Modeler on Windows XP with german localization and the JDK 1.6.0_11 from Oracle SQL Developer.
    Edited by: db-geek on 17.01.2011 08:17

    The settings for "View Details" are now saved and restored, when the data model is opened again.

  • Email Notifications for Collaboration Tasks are Not going to Lotus Notes

    Hello Everyone,
    Email Notifications for the Tasks in Collaboration are not going to Lotus Notes. We are working on EP 7.0 SP14 with external ITS and backend r/3 4.7.
    I performed all the configuration activities that are suggested in the below wiki:
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageId=61244035
    It was worked fine once for me when i perfomed the activities mentioned in the below thread:https://www.sdn.sap.com/irj/scn/thread?threadID=147316
    But after restarting our Portal Server the Email Notifications for Collaboration Tasks are not coming.
    Could any one please suggest that we need to do any other configurations.Thank you.
    Regards,
    Sridhar.
    Edited by: Sridhar on Mar 18, 2009 12:14 PM

    Hi Sridhar,
    I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
    https://wiki.sdn.sap.com/wiki/x/g4KmAw
    Please see if it helps,
    Robert

  • HT5622 How can I correct my rescue email address for my security questions. This email address is currently showing a typo.

    How can I correct my rescue email address for my security questions (when I am logged in with my Apple ID)?. This email address is currently showing a typo.

    You won't be able to change your rescue email address until you can answer your questions, if you don't know the password for that email account and you can't get it reset then you will need to contact Support in the country where you and your iTunes account to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • TS1424 WHAT IF I DON'T HAVE AN EXTRA BACKUP EMAIL ADDRESS FOR MY SECURITY QUESTIONS?

    what if I don't have an extra backup email address for my security questions?

    Call your country number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team.

Maybe you are looking for