Modification of the Message ID

Hi All,
I have received an email from account.microsoft.com domain. But when I look into the headers I see that the Message ID ends with "cez.ice". Could someone please explain why the Message ID is being modified as it should end with sending
domain name.
Thanks,
Surya.

Hi Surya,
From your description, I recommend you check if there is any configuration of header rewriting, outbound rewriting (from sender side) or inbound rewriting.
For more information, here is an article for your reference.
Address Rewriting on Edge Transport Servers
http://technet.microsoft.com/en-us/library/aa996806(v=exchg.150).aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

I installed an ancient version, photoshop element 2, on PC under Windows 7 after change of computer station and it is impossible to register modification made; error message: impossible because saturated disc ....what is not the case: many space on the di

I installed an ancient version, photoshop element 2, on PC under Windows 7 after change of computer station and it is impossible to register modification made; error message: impossible because saturated disc ....what is not the case: many space on the disc. How to repair this error please?

Hello
Thank you for your answer which is interesting because it is a disk of 2 TB... If I create a partition do you think it can solve my problem? I prefer this old version of Photoshop, very practical to use...

In mail, my attachments, both photos and documents appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the message. Thanks for your help, Karen.

In mail, my attachments, both photos and documents, appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the main message???? Thanks for your help, Karen.

softwater wrote:
...and costs $14.99
Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
I completely agree.

Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

Error changing modules | Lightroom

Error 513 while raising the message from satellite system

Hello All,
When I try to send message(Service desk) from satellite system, i get following message
"Because of error 513, no message was creat
Support Desk System"
I gusses there is some problem with authorisation.
please guide how can I fix this issue.
Regards,
Shyam.

Hi Gurus,
I have assigned customized action profile to SLFN transaction.
When I try to send message(Service desk) from satellite system, I get following message
"Because of error 513, no message was created
Support Desk System"
But when we check in crm_dno_monitor , the message is created at the backend,but without assigning external number range.
Whenever I am making any modification in action profile, it is creating the first messgae after restart
of SAP Solman System, but for next message, Error 513 message is raised and message is created at backend without assigning external number to it
I think there is some problem in number range or buffer in number range
Can some one help me in this
regards
Swati

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

In the message class M7 i NEED TO CHANGE THE MESSAGE 301 FROM E to w.

In the program LMBGBFES I want to change the mesage e301 to w301 in the enhancement point but sap is not allowing to do so.
CAN YOU GIVE A SOLUTION TO HOW TO DO IT.
with regards ,
Mahasweta Mitra

hai mahasweta,
u cant change the message from E301 to W301 as the code where the message is placed does not come under any enhancement point so that cannot be enhanced , u can do even with implicit enhancements but that does nto fall under it i mean uisng implicit enhancement options u can add some new code at start and end of the programs, u can use enahcnement poitns to enhance the code which comes under that point and it is obvious sap do not allow everythign to be modifed , so if u want to really chnage ti then u cna use access key and change it but it has implications on other programs from where this is called
regards
m.a

How to avoid the message "Do you want to save the changes you have made?"

i have 3 forms
master block
detail1 block of master
detail2 block of detail1
when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?

hi
may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
try to comment the reassigning database values
and give clear_form(do_commit);
most probably u will not get the message again
Regards
Rajdeep .A

Every time I open Itunes or plug in my Ipod or Ipad I get an error message that the registery settings for burning cds and dvds are missing and to reinstall Itunes. i've done this several times but the message won't go away.

Every time I plug my Ipod Nano or Ipad 2 into my computer I get the same error message. It says that registery settings are missing for importing burning cds and dvds due ot other burning software and to untinstall itunes and reinstall Itunes. I've done this several times and I'm not having any trouble importing cds at all and I can't make the message go away. It always comes up before Itunes will open.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after"

Modification of the Work Order Program TCode IW31

I need to do a modification to the work order program. Tcode IW31
When creating a work order with reference to an old work order, we want to clear any PRT data that might be in any item of the operations tab of the old order.
My question is: Which method should I use to get this change done?
I looked at the badi = IWO1_ORDER_BADI --> the method REFERENCE_ORDER_CHK, but I do not think this is the right one.
Please help me...
Thanks.
Regards,
Francisco.
Message was edited by:
Francisco Alonzo

To check for the suitable badi, Go to transaction SE24 and give the Object type as CL_EXITHANDLER and click on Display button.
Double click on method GET_INSTANCE, put a break point on case statement.
Execute your transaction and look for variable EXIT_NAME at your scenario then It will show the available badi's.
Reward if it is useful.
Thanks,
Srinivas

PSM-FM: Modify text of the message number BP629

Hi Experts,
In the standar message BP629, the text shows only Fund Center and Commitment Item codes, is there some way to it shows the name or description of those objects.
Standar Message BP629:
Item 010 101000 / 40000001 payment budget exceeded
Desired message:
Item 010 101000 ADMINISTRATION / 40000001 RENT payment budget exceeded
Thanks in advance.
José Luis

Hi,
I do not see how this could be done in standard. The problem is that the parameter which is sent to the message is the one which you see eventually. So, theoretically, you can enhance this message with another parameter (SE91), but you will have also to trace all the places where this message is issued and add another parameter, which will be the description of your FM objects, to it. And this is modification...
Regards,
Eli

Configuration of the Message MAHN

Good afternom
I am configuring the message <b>MAHN</b> for e-mail shipping for the vendors, even so it is presenting mistake: "Important modifications don't exist for the impression for document Purchase Order"
I made the configuration of the menssagem just leaving external e-mail in the processing routine. Does have more some thing that precise to do?
Tanks for help

Good morning Joubert.
I trying to edit the message MAHN directly from ME21N, and send it to local printer. Do you know if it´s possible? or i need do it from ME9F.
Thank,
Best regards.
Victor.

HT4061 i am seeing the message 1015 what does this mean and how can I fix it?

I am receiving a message 1015 what does this mean?

Error 1015 means you're trying to downgrade your iOS. You cannot do that. This is from an Apple article:
version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Modification of the Message ID

Similar Messages

Maybe you are looking for