Modification of Web Intelligence Sample Reports

I have found an example WebI Sample Report, that comes with the install. The title is Fold Unfold Sample. It could not be better suited for a quick solution. Does there exist a discussion on how to change the data source and fields?  

I appreciate your patience. Just to confirm, I will need to breakdown each of the components and create them from scratch in a new webi. One last question. Beyond the videos are instructions related directly to the Samples available.  I'm not really this lazy. My company is an old Crystal Reports Enterprise user. We bought SAP EDGE in the midst of a major expansion. Nearly a year later after finally dropping a couple of SAP developers that were not sufficiently prepared to implement what we had purchased, our backs are against the wall to to get critical elements in place for a roll out. No one, including our SAP provider, expected the SAP piece to take more than a few months.  I apologize, I know this may be well beyond the scope of this forum. The SAP provider is being very generous and making every effort to make this right but it is taking time to identify the staff.

Similar Messages

  • Web Intelligence Document Reports

    Hi Everyone,
    My Question is, How many Reports can we create in Web Intelligence Document? and How to open Web Intelligence through command prompt?
    Thanks & Regards
    Madhu...

    Hi,
    Thanks for your quick replay, but we can also open the Web intelligence Rich Client with Command Line, Infoview and Start > All Programs. So I need to open from Command Line. Please give the command or path to open the Web Intelligence Rich Client.
    Regards
    Madhu...
    Edited by: Laxmi Madhavi on Jan 7, 2011 10:46 AM
    Edited by: Laxmi Madhavi on Jan 7, 2011 10:48 AM

  • BI4.1 SP02 Installation Stuck on "Adding Web Intelligence Sample"

    Hi,
    I am in Panic, I am upgrading my BO4.0 SP04 to BI4.1 SP02. My existing BI4.0  system is clustered. Two clustered CMS running in Machine1 and machine2.
    I am running the 64 bit BI4.1 SP02 installer in Machine1.. Almost 80% of the installation is done. But for last 7 hrs, the installation is stuck on "Adding Web Intelligence Server". I have checked the log file in D:\BusinessObjects4\InstallData\logs\2014.05.03.10.36.01. Following is the last few lines from the log. Please help me.
    16:04:08.974   Action id:         RunCommand
    16:04:08.974   Source name:       InstallFramework.dll
    16:04:08.974   Source type:       sharedlib
    16:04:08.974   Source entry pt:   RunCommand
    16:04:08.974   Action source dir: D:\BusinessObjects4\InstallData\InstallCache\setup.core-4.0-core-64\14.1.2.1121\
    16:04:08.974   Action model:      64
    16:04:08.974 ExecuteAction: calling actionExecutor->ExecuteAction()
    16:04:08.974 NativeActionExecutor calling action out-of-proc.
    16:04:08.974 Path to action agent executable: C:\Users\dast\AppData\Local\Temp\RarSFX1\setup.engine\plat64\actionagentproc.exe
    16:04:08.974 Action connection attempt 1
    16:04:08.974 Found free listening port for action agent server: 4520
    16:04:08.974 AgentServer listening on port socket:4520 for remote action process
    16:04:08.974 Main thread is waiting for listening socket to be ready...
    16:04:08.989 Server accepted actionagentproc connection
    16:04:08.989 AgentServer connected to: 127.0.0.1:4520
    16:04:08.989 Current working dir: D:\BusinessObjects4\InstallData\logs\2014.05.03.10.36.01\
    16:04:08.989 NativeActionExecutor: temporarily updating path. Adding to path: D:\BusinessObjects4\InstallData\InstallCache\setup.core-4.0-core-64\14.1.2.1121\actions\
    16:04:08.989 Set environment variable 'Path': 'D:\BusinessObjects4\InstallData\InstallCache\setup.core-4.0-core-64\14.1.2.1121\actions\'.
    16:04:08.989 Prepend to environment variable 'Path': 'D:\BusinessObjects4\InstallData\InstallCache\setup.core-4.0-core-64\14.1.2.1121\actions\;D:\app1\product\11.2.0\client_1\bin;E:\app\product\11.2.0\client_1\bin;C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\idmu\common;C:\Program Files\OmniBack\bin\;d:\Program Files\HP\HP BTO Software\lib;d:\Program Files\HP\HP BTO Software\bin;d:\Program Files\HP\HP BTO Software\bin\win64;d:\Program Files\HP\HP BTO Software\bin\win64\OpC;'.
    16:04:08.989 NativeActionExecutor: calling action entry point.
    16:04:09.005 RunCommand: Get CmdLine: "D:\BusinessObjects4\SAP BusinessObjects Enterprise XI 4.0\win64_x64\sapjvm\bin\javaw.exe" -Dtracelog.logdir="D:\BusinessObjects4\SAP BusinessObjects Enterprise XI 4.0\Logging\ " -Dtracelog.process=biarengine -jar "D:\BusinessObjects4\\SAP BusinessObjects Enterprise XI 4.0\java\lib\biarengine.jar" "D:\BusinessObjects4\\SAP BusinessObjects Enterprise XI 4.0\java\lib\biarengine_webisamples.properties" "password=********"
    16:04:09.005 RunCommand: Get Hide:    1
    16:04:09.005 RunCommand: Get DisableWOW64Redirection: 0
    16:04:09.005 RunCommand: Get ProductObjectModel: 32
    16:04:09.005 RunCommand: Get noWaiting: 0
    16:04:09.005 RunCommand: WOW64 redirection is enabled
    16:04:09.005 RunCommand: UseShellExecute:    false
    16:04:46.132 Could not reach CMS 'XXXXXX:6400'. Specify the correct host and port and check for network issues. (FWM 20030)
    Could not reach CMS 'XXXXXX:6400'. Specify the correct host and port and check for network issues. (FWM 20030)
      at com.crystaldecisions.sdk.occa.security.internal.LogonService.ensureServiceStub(LogonService.java:695)
      at com.crystaldecisions.sdk.occa.security.internal.LogonService.doUserLogon(LogonService.java:838)
      at com.crystaldecisions.sdk.occa.security.internal.LogonService.doUserLogon(LogonService.java:815)
      at com.crystaldecisions.sdk.occa.security.internal.LogonService.userLogon(LogonService.java:211)
      at com.crystaldecisions.sdk.occa.security.internal.SecurityMgr.userLogon(SecurityMgr.java:177)
      at com.crystaldecisions.sdk.framework.internal.SessionMgr.logon_aroundBody0(SessionMgr.java:454)
      at com.crystaldecisions.sdk.framework.internal.SessionMgr.logon_aroundBody1$advice(SessionMgr.java:512)
      at com.crystaldecisions.sdk.framework.internal.SessionMgr.logon(SessionMgr.java:1
    16:04:46.132 )
      at com.businessobjects.sdk.biar.utility.XSDUtility.initializeSDK(XSDUtility.java:544)
      at com.businessobjects.sdk.biar.utility.XSDUtility.main(XSDUtility.java:979)
    Caused by: com.crystaldecisions.sdk.exception.SDKException$OCAFramework: Communication error occurred when trying to connect to server TANAYCOMP:6400 (FWM 01009)
    cause:com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server XXXXXX:6400 (FWM 01009)
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.TRANSIENT: attempt to establish connection failed: java.net.ConnectException: Connection refused: connect  minor code: 0x4f4f0001  completed: No
    detail:Communication error occurred when trying to connect to server XXXXXX:6400 (FWM 01009) attempt to establish connection failed: java.net.ConnectException: Connection refused: connect
    detail:Communication error occurred when trying to connect to server XXXXXX:6400 (FWM 01009) attempt to establi
    16:04:46.132 sh connection failed: java.net.ConnectException: Connection refused: connect
      at com.crystaldecisions.sdk.exception.SDKException.map(SDKException.java:140)
      at com.crystaldecisions.sdk.occa.security.internal.LogonService.ensureServiceStub(LogonService.java:694)
      ... 9 more
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server XXXXXX:6400 (FWM 01009)
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.TRANSIENT: attempt to establish connection failed: java.net.ConnectException: Connection refused: connect  minor code: 0x4f4f0001  completed: No
    detail:Communication error occurred when trying to connect to server XXXXXX:6400 (FWM 01009) attempt to establish connection failed: java.net.ConnectException: Connection refused: connect
      at com.crystaldecisions.enterprise.ocaframework.RawAPSDirectory.find(RawAPSDirectory.java:256)
      at com.crystaldecisions.enterprise.ocaframework.APSServerHandler.bui
    16:04:46.132 ldAPSClusterInfo(APSServerHandler.java:581)
      at com.crystaldecisions.enterprise.ocaframework.APSServerHandler.buildServerInfo(APSServerHandler.java:192)
      at com.crystaldecisions.enterprise.ocaframework.ServerController.redirectServer(ServerController.java:534)
      at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.redirectServer(ServiceMgr.java:959)
      at com.crystaldecisions.enterprise.ocaframework.ManagedSessions.get(ManagedSessions.java:258)
      at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService_aroundBody4(ServiceMgr.java:520)
      at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(ServiceMgr.java:1)
      at com.crystaldecisions.sdk.occa.security.internal.LogonService.ensureServiceStub(LogonService.java:651)
      ... 9 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.TRANSIENT: attempt to establish connection failed: java.net.ConnectException: Connection refused: connect  minor code: 0x4f4f0001  completed: No
      at com.crystaldecisions.thirdpart
    16:04:46.132 y.com.ooc.OCI.IIOP.Connector_impl.connect(Connector_impl.java:167)
      at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClient.createTransport(GIOPClient.java:233)
      at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkersPool.next(GIOPClientWorkersPool.java:122)
      at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClient.getWorker(GIOPClient.java:105)
      at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClient.startDowncall(GIOPClient.java:409)
      at com.crystaldecisions.thirdparty.com.ooc.OB.Downcall.preMarshalBase(Downcall.java:181)
      at com.crystaldecisions.thirdparty.com.ooc.OB.Downcall.preMarshal(Downcall.java:298)
      at com.crystaldecisions.thirdparty.com.ooc.OB.PIDowncall.preMarshal(PIDowncall.java:198)
      at com.crystaldecisions.thirdparty.com.ooc.OB.DowncallStub.preMarshal(DowncallStub.java:265)
      at com.crystaldecisions.thirdparty.com.ooc.OB.DowncallStub.setupRequest(DowncallStub.java:545)
      at com.crystaldecisions.thirdparty.com.ooc.CORBA.Delegate.request(Delegate.java:556)
      at com.crystaldecisi
    16:04:46.132 ons.thirdparty.com.ooc.CORBA.Delegate.is_a(Delegate.java:373)
      at com.crystaldecisions.thirdparty.org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:88)
      at com.crystaldecisions.enterprise.ocaframework.idl.ImplServ.OSCAFactoryExHelper.narrow(OSCAFactoryExHelper.java:100)
      at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getOSCAFactory_aroundBody8(ServiceMgr.java:552)
      at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getOSCAFactory(ServiceMgr.java:1)
      at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getUnmanagedService_aroundBody16(ServiceMgr.java:721)
      at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getUnmanagedService(ServiceMgr.java:1)
      at com.crystaldecisions.enterprise.ocaframework.RawAPSDirectory.find(RawAPSDirectory.java:155)
      ... 17 more
    16:04:46.350 2014/05/03, 04:04:46: RunRedistProgram: return value -4
    16:04:46.350 RunCommand: Command returned result [-4]. Retried [0] times. Will retry up to [9] times. Waiting for [30] seconds...
    16:05:25.755 Import file parsing exception occurred : 'XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)' (FWM 04009)
    com.businessobjects.sdk.biar.om.OMException$ExceptionWrapper: Import file parsing exception occurred : 'XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)' (FWM 04009)
      at com.businessobjects.sdk.biar.om.internal.ThrowableSink.rethrowExceptions(ThrowableSink.java:88)
      at com.businessobjects.sdk.biar.om.internal.importer.OMImporter.importObjects(OMImporter.java:262)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager.doImport(ObjectManager.java:671)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager.access$500(ObjectManager.java:62)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager$1.run(ObjectManager.java:423)
      at com.businessobjects.sdk.biar.om
    16:05:25.755 .internal.ObjectManager$1.run(ObjectManager.java:389)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager$AbstractImport.run(ObjectManager.java:913)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager.importArchive(ObjectManager.java:378)
      at com.businessobjects.sdk.biar.utility.XSDUtility.importXMLOM(XSDUtility.java:662)
      at com.businessobjects.sdk.biar.utility.XSDUtility.importXML(XSDUtility.java:610)
      at com.businessobjects.sdk.biar.utility.XSDUtility.performAction(XSDUtility.java:588)
      at com.businessobjects.sdk.biar.utility.XSDUtility.main(XSDUtility.java:980)
    Caused by: com.businessobjects.sdk.biar.exception.XSDException$ImportParsingException: Import file parsing exception occurred : 'XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)' (FWM 04009)
    cause:com.businessobjects.sdk.biar.exception.XSDException$XSDParsingException: XSD file parsing exception occurred : 'Co
    16:05:25.755 uld not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)
    detail:Import file parsing exception occurred : 'XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)' (FWM 04009) XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)
      at com.businessobjects.sdk.biar.internal.ArchiveParser.parse(ArchiveParser.java:74)
      at com.businessobjects.sdk.biar.om.internal.importer.ParserThread.runSafely(ParserThread.java:55)
      at com.businessobjects.sdk.biar.om.internal.concurrent.AbstractThread.run(AbstractThread.java:19)
    Caused by: com.businessobjects.sdk.biar.exception.XSDException$XSDParsingException: XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:
    16:05:25.755 ApplicationsWithDiscussion'' (FWM 04011)
      at com.businessobjects.sdk.biar.internal.ArchiveParser$SAXHandler.startPrefixMapping(ArchiveParser.java:515)
      at org.apache.xerces.parsers.AbstractSAXParser.startNamespaceMapping(Unknown Source)
      at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
      at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
      at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)
      at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
      at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
      at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
      at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
      at javax.xml.parsers.SAXParser.par
    16:05:25.755 se(SAXParser.java:395)
      at com.businessobjects.sdk.biar.internal.ArchiveParser.parse(ArchiveParser.java:66)
      ... 2 more
    Caused by: com.businessobjects.sdk.biar.exception.XSDException$XSDParsingException: XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.HandleElement(XSDDOMParser.java:569)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseXSDNode(XSDDOMParser.java:335)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseChildren(XSDDOMParser.java:350)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.HandleSequence(XSDDOMParser.java:530)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseXSDNode(XSDDOMParser.java:333)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseChildren(XSDDOMParser.java:350)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.HandleExtension(XSDDOMParser.java:59
    16:05:25.755 8)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseXSDNode(XSDDOMParser.java:337)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseChildren(XSDDOMParser.java:350)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.HandleComplexContent(XSDDOMParser.java:523)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseXSDNode(XSDDOMParser.java:329)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseChildren(XSDDOMParser.java:350)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.HandleType(XSDDOMParser.java:510)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.ParseXSDNode(XSDDOMParser.java:325)
      at com.businessobjects.sdk.biar.internal.XSDDOMParser.parseXSD(XSDDOMParser.java:256)
      at com.businessobjects.sdk.biar.internal.XSDManager$AbstractPluginXSD.getXSD(XSDManager.java:200)
      at com.businessobjects.sdk.biar.internal.XSDManager.getPluginXSD(XSDManager.java:82)
      at com.businessobjects.sdk.biar.internal.DefinitionSpace.addPluginXSD(DefinitionSpace.java:2
    16:05:25.755 10)
      at com.businessobjects.sdk.biar.internal.DefinitionSpace.addPluginXSD(DefinitionSpace.java:196)
      at com.businessobjects.sdk.biar.internal.ArchiveParser$SAXHandler.startPrefixMapping(ArchiveParser.java:496)
      ... 14 more
    16:05:26.520 2014/05/03, 04:05:26: RunRedistProgram: return value -5
    16:05:26.520 RunCommand: Command returned result [-5]. Retried [1] times. Will retry up to [9] times. Waiting for [30] seconds...
    16:06:07.890 Import file parsing exception occurred : 'XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)' (FWM 04009)
    com.businessobjects.sdk.biar.om.OMException$ExceptionWrapper: Import file parsing exception occurred : 'XSD file parsing exception occurred : 'Could not find type meta-data with name 'io:ApplicationsWithDiscussion' for element 'io:ApplicationsWithDiscussion'' (FWM 04011)' (FWM 04009)
      at com.businessobjects.sdk.biar.om.internal.ThrowableSink.rethrowExceptions(ThrowableSink.java:88)
      at com.businessobjects.sdk.biar.om.internal.importer.OMImporter.importObjects(OMImporter.java:262)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager.doImport(ObjectManager.java:671)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager.access$500(ObjectManager.java:62)
      at com.businessobjects.sdk.biar.om.internal.ObjectManager$1.run(ObjectManager.java:423)

    Looks like the CMS has not fully started, or not started at all.  There is a point before this that it attempts to logon to the CMS, did that succeed?
    If not, is the cms database local to one or both cms hosts?
    If the cms database is hosted on a separate server check the response time, for oracle this is done with tnsping.  If over 5ms response time this slows things down.  Over 10ms gets into problems.
    If the database is on the other side of a firewall this can also contribute.

  • Building Reports Using the Web Intelligence HTML Report Panel - URL

    Is there a way to launch HTML report panel directly through a URL for creating webi reports..I know we can set the preference for HTML report panel in infoview...but thats not the requirement. I have to launch the HTML or Java report panel editor according to the User selection on the fly....its a customized java code for webi reports.
    Any help on this is appreciated!
    Thanks
    Chenthil

    hi
    You have a better response chance if you post this in the BusinessObjects SDK forum.
    check out this link for information on SDK.
    https://www.sdn.sap.com/irj/boc/sdklibrary
    This contains detailed information on the SDK calls
    Asim

  • Web Intelligence: Save Report as PDF and with embedded HTML code

    Hi all.
    Sorry but I'm not able to find any post about this matter, please feel free to provide links if you know existing topics about this problem.
    We created a beautiful report with HTML5 code embedded into a blank cell and we are now trying to export it in a printable format (e.g.: PDF or HTML).
    As you know (as per manual information) it is not possible to export a report with embedded HTML code and keeping it in the output (cell with embedded HTML code is rendered blank).
    My question is: is there a known workaround or an alternative solution to export the report and keep its content?
    Print screen is not a valid option :-P
    Thanks for the support or any suggestions
    Stecas

    Product limitation; vote for change on ideaplace, etc. I don't believe there is an *easy* workaround, but see:
    https://scn.sap.com/thread/3149287
    HTH
    NMG

  • BO Web Intelligence InfoView Reports

    What query filter should be used for a date prompt to assure the end date is inclusive of the date range, e.g., Beginning Date = June 1, 2008 and Ending Date = June 30, 2008.  When you use between, the last date is June 29, when you use Less than or Equal to, the last date is June 29.
    This becomes a problem if you want to display the date range.  We tell the user to add 1 day to the end date in order to receive accurate data.  When you use =UserResponse to display the date range in the report, it displays the date entered by the user which isn't the actual date range of the data being displayed.
    Sorry if this sounds convoluted but it is difficult to determine what to use.

    Hi ,
    You can use two seperate prompts and join them using AND.
    Eg.
             Beginning Date  Equal to  Enter date: prompt
    AND  
             End Date Equal to  Enter date: prompt
    So that you can get date form beginning date to End date.
    Regards,
    Chaitanya Deshpande

  • Webi Intelligence - Linking Reports but not using prompts

    Hi, I am trying to link Report 1 to Report 2 but rather than passing the selection to run a query to Report 2, it simply filters for the selection from Report 1 on Report 2.
    Step1: Report 1 - Select salesman Name
    Step2: Goes to Report 2 and filters for the selected Salesman name from step above
    In order words, I don't want Report 2 to refresh or run, I just want what was selected from Report 1 and find it on Report 2. Is this possible?
    Thanks!!

    Hi socheathly,
    You can have a dummy prompt (something like @prompt A = @prompt A) in Report 2 just to capture the parameter from Report 1. But this is will still lead to refreshing the report 2.
    I think the only way to capture a parameter from another report is through a prompt. Correct me if I am wrong.
    Cheers!
    Aris.

  • Can Web Intelligence display time in 24-hour clock format?

    I would appreciate your kind help in answering this question:  How can I change the time format in a formula so as to display time in the 24-hour clock format?
              Presently the CurrentTime() value format looks like this  :  02:26:25 PM GMT-04:00
              Instead, I want it displayed in the 24-hour clock format like this  :  14:26
    I'm developing Web Intelligence reports in the BusinessObjects Enterprise XI 3.2 InfoView environment.
    I searched several places for an answer to this question, but had no luck.
    I searched the BusinessObjects Enterprise InfoView online help document (i.e., Web Intelligence Java Report Panel); I also searched two web sites: the Experts-Exchange website, and the BOB www.forumtopics.com website.
    I figured out that there is built in conversion function FormatDate() that can convert a date value into a text value, as for example :  FormatDate( CurrentDate(); "mmmm dd, yyyy" )
    However, I have not found an equivalent time function that would convert a time value into a text value of a specified format.
    Edited by: OSoccer on Jul 7, 2010 9:05 PM
    Edited by: OSoccer on Jul 7, 2010 9:06 PM
    Edited by: OSoccer on Jul 7, 2010 9:08 PM

    Anil,
         Perfect;  you answered my question!
         The only thing that I had to do differently was to leave off the quote marks from the string "HH:mm:ss" when I entered it into the Custom Date/Time box of the Number Format dialog window.
         While on this subject of the Number Format dialog window, I saw that the Date/Time box already held the following string value:
                    FULL_DATE
         So, thinking that I should leave that value alone, I entered the string "HH:mm:ss" in the box labeled "Undefined" next to the Date/Time box, instead.  That didn't work.  It just caused the webi report to display the CurrentTime() value as a long date, like this:
                   Friday, July 9, 2010
         So then I replaced the string "FULL_DATE" (without the quotes) with the string "HH:mm:ss" (first with and then without the quotes).  In the first try, the report displayed the time as "14:20:34"; in the second try, the report displayed the time as 14:20:34.
         Questions:
         Can you please tell me:
         1. What is the meaning and usage of the label FULL_DATE?
         2. In my attempts to get the time formatted the way I wanted it to look, I filled the Properties list (of the Number Format dialog window) with junk labels such as those listed below.  How can I delete these labels?
                   FULL_DATE; "HH:mm:ss"
                   FULL_DATE
                   FULL_DATE
                   FULL_DATE; "HH:mm:ss"
         3. What is the purpose of the box labeled "Undefined" next to the Date/Time box?

  • No Input controls in Web Intelligence Ritch Client ?

    Hi,
    I have got Web Intelligence Rich Client 12.1.0.882 ( the one from the Trial BO Edge)
    I wan't to set Input Controls like Buttons, etc.
    According to the Documentation "Building Reports with the Web Intelligence Java Report Panel" 
    ( xi31_sp2_webi_java_en.pdf ) this is possible:
    Chapter 19 "Filtering data using input controls"
    Input controls defined
    Input controls provide a convenient, easily-accessible method for filtering
    and analyzing report data. You define input controls using standard windows
    controls such as text boxes and radio buttons. You associate these controls
    with report elements such as tables or section headers, and use the controls
    to filter the data in the report elements. When you select values in the input
    control, Web Intelligence filters the values in the associated report elements.
    Anybody found the Input Control Tab ?
    Where ?
    Wrong version ?
    Thanks
    Martin

    Hello Martin,
    Thank you for your interest in that feature.
    Input controls were delivered from Service Pack 2 of XI 3.1, and are available from all WebI clients, with that release level.
    Version number you provide corresponds to XI 3.1, not XI 3.1 SP2, for which About... should display version number 12.2.0.290, reason why you haven't been able to find the feature.
    Input control tab is available as an extra tab on the left hand side of Rich Client (by default), tab is simply called 'Input Controls', there are also a specific entry on some Report Element contextual menus (to facilitate input control definition from current selection).
    Hope that helps,
    David.

  • Invalid Session - WIH 00013 - Web Intelligence

    Hello All,
    After migrate BOE X3.1 to X3.1 R2 i'm getting the follow error in one WebI report.
    "Invalid session. Please close your browser and log on again (Error WIH: 00013)"
    I have other Universes/Reports that work fine.
    Could anyone help me?
    Tanks a lot.
    Glauber Cunha

    Hi Galuber,
    Have a look at following SAP Notes:
    1202619 - Error: "Invalid Session. Please close your browser and log on again. (Error: WIH 00013)" when running a Web Intelligence report
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303236313926]
    1206464 - Error: "Invalid session. Please close your browser and log on again. (Error: WIH 00013)" while in Web Intelligence Java Report Panel
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303634363426]
    Regards,
    Bashir Awan

  • Export a Web Intelligence Report using its SDK

    Is it possible to Export a Web Intelligence Report directly without going to BO Link with the help of Business Object SDK? My requirement is to export the report from java application.
    Edited by: Monika John on May 1, 2010 10:25 PM

    Hi Monika -
    In the future you'll want to post questions like this one in the Business Objects Java SDK forum found at:
    Java SDK Forum: Java SDK Application Development
    Your requirements is a common one.  More resources, sample code and snippets for Report Engine / Export workflows can be found at:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaReportEngineSDKSamples
    Good Luck

  • Date data from Web Intelligence Report not equal to Date from Source

    Hi,
    I am creating a Web intelligence report based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Web Intelligence, it is displaying as 1/1/70. For example, in the BEx Query, 'Date' = 11/01/2011. In Crystal Reports, it is showing up as 1/1/70 as the only date. The source field contains more than 1 date.  I'm not sure what's going on. I am using the 14.0.0 (2010) version of the Web Intelligence through the BusinessObject Launch Pad.
    Please help!
    -Janice

    Hi
    The patches for SAP BusinessObjects BI4.0 are accumulative.  This means you can download the latest patch (for the Support Package that you have installed) and it will have all the patch fixes
    It looks like older patches are being removed from the sites & only the most recent patch or patches are available since they are accumulative
    I believe Patch 2.15 should now be available, but anything later than Patch 2.6 should help you in this instance
    I hope this helps
    regards...ian

  • Web Intelligence report fails after adding hyperlink

    I am trying to add a hyperlink to a Business Objects report created in Desktop Intelligence 3.1.  When I export the report to WebIntelligence and try to run the report, I get an error box that pops up with the following message:
    T​h​e​ ​d​o​c​u​m​e​n​t​ ​i​n​s​t​a​n​c​e​ ​i​s​ ​n​o​ ​l​o​n​g​e​r​ ​a​v​a​i​l​a​b​l​e​.​ ​P​l​e​a​s​e​ ​r​e​o​p​e​n​ ​t​h​e​ ​d​o​c​u​m​e​n​t​.​ ​(​E​r​r​o​r​:​ ​R​F​C​ ​0​0​4​2​1​)
    Can anyone please tell me what is going on?  I can't find any reference to that error anywhere.

    This problem is with a report created in Desktop Intelligence and then run in the Web Intelligence environment.  If I tried to run the report, it would fail.  The only way I managed to get the report to work, was to turn off the auto refresh when open.

  • Web Intelligence Report + BI 7.0 Analysis Authorizations

    Hello Experts,
    I have created a report on a universe based in a SAP BW InfoCube that contains an authorization relevant InfoObject (Company Code).
    BW Analysis authorization have been set up for this cube in such way that the user should have access only to data containing one of the two values of Company Code (lets say for example that the user can access value "A").
    It seems to be working fine when testing them via a BEx Query or via rsecadmin (rsrt with detailed analysis authorization logs). When the test user tries to view the full contents of the specific cube gets an "access denied" message (this is normal), whereas if the user runs a report with a filter "A" on Company Code the report returns the results as it should have. So far so good.
    For testing use within Web Intelligence, I have created the following Single Sign On (SSO) universes: a)directly on the cube, b)via a "select all" query and finally c)via a filtered query (filtering the exact allowed values of analysis authorization of the test user). All of the above have unfortunately the exact same issues:
    When a test user with limited analysis authorization (i.e. a user that can only access value "A" of Company Code) tries to view a report on either of these universes, then the result is the following message when trying to execute the query "A database error occured. The database error text is: Error loading cube MyCube/MyQuery (catalog MyCube): Unknown error. (WIS 10901)"
    I have tried several settings on the universe (like filter working on LoV as well) but none helped.
    If we replace the user's analysis authorizations with full access on company code (values "A" and "B") the query runs as it should have.
    Any ideas?
    Best regards
    Giorgos

    Hi,
    has the Universe been created on the cube level or on the query level ?
    In case it is on the cube level it will fail because :
    Analysis authorizations are not based on authorization objects. Instead, you create authorizations that include a group of characteristics. You restrict the values for these characteristics.
    The authorizations can include any authorization-relevant characteristics, and treat single values, intervals, and hierarchy authorizations in the same way. Navigation attributes can also be flagged as authorization-relevant in the attribute maintenance for characteristics and can be added to authorizations as separate characteristics.
    You can then assign this authorization to one or more users.
    All characteristics flagged as authorization-relevant are checked when a query is executed.
    *A query always selects a set of data from the database. If authorization-relevant characteristics are part of this data, you have to make sure that the user who is executing the query has sufficient authorization for the complete selection. Otherwise, an error message is displayed indicating that the authorization is not sufficient. In principle, the authorizations do not work as filters. Very restricted exceptions to this rule are hierarchies in the drilldown and variables that are filled depending on authorizations. Hierarchies are mostly restricted to the authorized nodes, and variables that are filled depending on authorizations act like filters for the authorized values for the particular characteristic*
    Ingo

  • [BO over SAP BW] Web Intelligence Report + BI 7.0 Analysis Authorizations

    Hello Experts,
    I have created a report on a universe based in a SAP BW InfoCube that contains an authorization relevant InfoObject (Company Code).
    BW Analysis authorization have been set up for this cube in such way that the user should have access only to data containing one of the two values of Company Code (lets say for example that the user can access value "A").
    It seems to be working fine when testing them via a BEx Query or via rsecadmin (rsrt with detailed analysis authorization logs). When the test user tries to view the full contents of the specific cube gets an "access denied" message (this is normal), whereas if the user runs a report with a filter "A" on Company Code the report returns the results as it should have. So far so good.
    For testing use within Web Intelligence, I have created the following Single Sign On (SSO) universes: a)directly on the cube, b)via a "select all" query and finally c)via a filtered query (filtering the exact allowed values of analysis authorization of the test user). All of the above have unfortunately the exact same issues:
    When a test user with limited analysis authorization (i.e. a user that can only access value "A" of Company Code) tries to view a report on either of these universes, then the result is the following message when trying to execute the query "A database error occured. The database error text is: Error loading cube MyCube/MyQuery (catalog MyCube): Unknown error. (WIS 10901)"
    I have tried several settings on the universe (like filter working on LoV as well) but none helped.
    If we replace the user's analysis authorizations with full access on company code (values "A" and "B") the query runs as it should have.
    Any ideas?
    Best regards
    Giorgos

    Hi,
    has the Universe been created on the cube level or on the query level ?
    In case it is on the cube level it will fail because :
    Analysis authorizations are not based on authorization objects. Instead, you create authorizations that include a group of characteristics. You restrict the values for these characteristics.
    The authorizations can include any authorization-relevant characteristics, and treat single values, intervals, and hierarchy authorizations in the same way. Navigation attributes can also be flagged as authorization-relevant in the attribute maintenance for characteristics and can be added to authorizations as separate characteristics.
    You can then assign this authorization to one or more users.
    All characteristics flagged as authorization-relevant are checked when a query is executed.
    *A query always selects a set of data from the database. If authorization-relevant characteristics are part of this data, you have to make sure that the user who is executing the query has sufficient authorization for the complete selection. Otherwise, an error message is displayed indicating that the authorization is not sufficient. In principle, the authorizations do not work as filters. Very restricted exceptions to this rule are hierarchies in the drilldown and variables that are filled depending on authorizations. Hierarchies are mostly restricted to the authorized nodes, and variables that are filled depending on authorizations act like filters for the authorized values for the particular characteristic*
    Ingo

Maybe you are looking for

  • Unable to Find out Adapter Engine in the Communication Channel

    Hi Experts, I am Unable to select the Adapter Engine As Integration Server in the File Sender Communication Channel. Please Let Me Know Regards Khanna

  • Fuel Consumption Report Modification - 2

    Hi Experts I am working on fuel consumption modification. can anyone help me how to get max and min value for this program I am getting one row correct with equipment no is enter but when I enter the range of equipment no it is taking long time and t

  • HTTP AXIS - Add soap header element

    Hi, I want to use WS-Security in my SOAP flow. But I want also add an attribute inside the soap header. Here is what I want : <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">    <SOAP:Header>         <OPER_REF>SAPPI</OPER_REF>  

  • Can't use phone ,forgot password

    i just purchased phone,for some reason password not workinbg locked out of phone ...help

  • Can't see my sata disk suddenly.

    I used to have it mounted on /home over my xfs disk(which also had a /home, but that shouldn't matter right!?). The sata disk was/is a ext3 disk. And i'm sorry but this is all i can tell: 1. i got a ext3 error spitted out on console. 2. i think, a su