Modification problems while applying SAP Note manually

Hi Guys,
I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
Now I can go to SPAU and reset the object, but it will lose all its changes which was done
by 2 SAP notes previously.
How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
the changes for other 2 notes !!
Is there a solution for this? please help asap.
Many thanks in advance,
Sandip.

If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
I had the same problem but we had manual changes to the program that is why didnt allow to implement note

Similar Messages

I'm facing problem while applying OSS Note 1046758

Hi gurus,
I'm facing problem while applying OSS Note 1046758. That note is asking to create J_1IEWT_ACKN_N table.
After creating the table I went to the UTILITIES menu => TABLE MAINTENANCE GENERATOR.
Then OSS Note 1046758 is asking us to give the function group name as J_1IEFILE.
Next Choose One Step.
and then Find Screen Numbers.
While clicking the CREATE button it is not allowing me to assign the function group group J_1IEFILE.
How to overcome this problem.
Very urgent.
Any answers are welcome and will be rewarded .
Regards,
Jacob Charles S.

Hi Sheeba,
I have applied the follwoing notes.
1046758 -- To display acknowledgement number in Form No 16A
 558469
 983795
 498087
 912767
 773171
 891923 -- 452805 (Correction Made)
905220 -- Blank Values for TDS, Surcharge & Ecess in new certificate
 923216
 833092
984623 -- J1INCERT:Consolidated Issues - SEP 2006
Eventhough I'm not getting the those values in the respective fields.
I mean, TDS Rate, ECESS Rate and CHENCK NUMBER.
More over, I want the FROM 16A should contain the Higher Education CESS field with values.
any notes has to be applied apart from this or what....
Wht are the table I have to maintain for this in SM30.
Kindly help me... It's urgent...
Regards,
Jacob Charles S.

Problem during implementing SAP note manually

HI
I am implementing a note manually, which have instruction like below
Manual Pre-Implement.
VALID FOR
Software Component   SCMSNC                         Supply Network...
Release 700          Until SAPK-70006INSCMSNC
Release 701          Until SAPK-70101INSCMSNC
o Open BAdI /SCF/CSV_SETTINGS in SE18
- Add the following 2 methods to interface /SCF/IF_EX_CSV_SETTINGS:
CHANGE_INPUT_ENCODING
CHANGE_OUTPUT_ENCODING
But when I go till point I can able to add the method as it is grayed out
Is there any reason or different way of implementing the note manually?
Regards
Dev

To implement note manually you need to get the access key. Once you give the access key you can apply the note corrections.

Facing Problem while updating SAP Note for ESI Limit

Hello,
While Updating ESI Note 0001465628, Step 4 i.e Enable the feild in the cluster 'ESI'. When ABAP'er execute a report RPUGDF00 through SE38 he is getting "Internal Table" radio button option instead of payroll.
If he enters "Internal Table" feild but he is not getting "f" substep feilds in step 4.
Can anybody please guide me to update this note.
Edited by: sunitaos on May 28, 2010 2:43 PM

HI,
Just go thru the list of following notes related to ESI.
Note No     Description     Date
1465628     ESI Limit increased and length of temp. ESI no increased     12.05.2010
1441625     Length of ESI number is change     29.03.2010
1415952     Change in ESI Eligibility limit for physically disabled Ees     20.02.2010
1432975     Length of ESI No     15.02.2010
1425068     ESI FORM 5:Addition of Dispensary information     29.01.2010
1347850     ESI Reporting-Inconsistent in case of org. reassignment     10.01.2010
1403619     ESI Form 5 - Sorting based on ESI Insurance number     30.11.2009
1410113     ESI limit for Disabled Ees     24.11.2009
1409580     ESI Form 5: Add Dispensary Information     20.11.2009
1401519     ESI Retro Treatment     29.10.2009
1392870     ESI Form5:Allignment of the text inconsistent for PDF layout     12.10.2009
1383672     HINCALC0: For split in IT27 after termination, payroll dumps     09.09.2009
1348534     ESI: /3E1 and /3E2 are inconsistent in case of retro run     18.06.2009
1344386     ESI Treatment in case income recieved during inactivity     31.05.2009
1327118     Form 16 - Export data from Temse to PCL4 for previous years     13.04.2009
1290863     Error while generation of Form 6 in ESI report     18.03.2009
1247107     ESI Form 5 - New Layout     06.11.2008
1244296     ESI Form 5 - New Layout     22.08.2008
506128     Legacy data transfer     25.06.2008
1177470     ESI New Form6- Total is missing in worksheet     17.06.2008
1172216     ESI Form 6 - Remarks is missing in PDF Layout     27.05.2008
1164880     ESI Form-6 & Form7-Inconsistent in case of splits in IT0001     23.05.2008
1140970     New ESI Form Layout     23.05.2008
1071281     PY-IN: Master Note for FY 2007-08 (Developments)     02.01.2008
1117371     Double deduction in ESI for employee during retro     26.11.2007
1099052     ESI Form 7 throws error when printing     05.10.2007
1071945     ESI Monthly Eligibility report progarm     05.07.2007
1069980     Executing report program HINCESI0 for multiple payroll areas     29.06.2007
1048358     ESI form 6: Effect of IT0001 split     20.04.2007
1032446     Enabling correction offcycle payroll run     02.04.2007
Thanks & Regards,
Param

Regarding applying SAP Note 1172084

Hi all,
I have applied SAP Note 1172084 - PKMC: Dump DYNPRO_NOT_FOUND for control cycles of type SeqJC through SNOTE as we are receiving run time error Dynpro Not Found...Even though it didnt solve our problem..
Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
Could you pls. help in solving the problem..
Thanks,
Subbu

> Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
There are corrections in the note, if you scroll down to "correction instructions" for your release and you open it, there are 4 program changes displayed.
If you can apply the note via SNOTE and the program is still dumping I'd open an OSS call.
Markus

Problem while implementing OSS note(1157904)

HI,
I am facing a problem while implementing OSS note 1157904.I am getting a message "no valid correction instruction".
I checked support pack levels .I checked source code also, it is not implemented.
Regards,
Pratap.

You need to get back to SAP. Sometimes notes have incorrect information in them.

Applying SAP note 1358294

Dear All,
i m having ecc6 and I have to apply SAP note 1358294 on DEV,QUA,and PRD server.I read the note but i m bit confused So before applying this note i have to import patch level to SAPKH60017 ?
OR
I can directly apply this Snote.
Regards
Ashok

Dear Subhash and Bose,
Thnx for ur valuable reply.So i dont to import any patch jst i have to apply the note?
I have to apply this note from SNOTE transaction code from 000 client. Do i have to make user in 000 client with having SAP_ALL and SAP_NEW profile.As we do during importing patches?
Or
Directly i can do from DDIC user in 000 client.Should i have take some Prerequisite like all user be locked while applying SNOTE.
Regards
Ashok

Problem while installing SAP netweaver developer workplace

hi,
I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
[Cannot connect to host uklonki1 Connection refused: connect, -813.]
the database is online and the x-server is also started.hope anyone can help me in this problem.
with regards,
Jaisamma

Hi Michael,
I have tried that, but the result remains the same.
Manish

Outdated prerequisit when applying SAP Note

Hi Experts,
Ask a noob question here.
When we apply SAP note, SAP may popup the window to download an outdated prerequisit. For example, when I apply note A on release 700, system may popup to let me download note B, whose fix has been included in release 700. In this case, shall I just go ahead to download the old prerequisit in order to apply the new note?
Actually I awlays download the old note in order to apply the new note. There seems to be no impact. But I want to know if there is any offical note from SAP to confirm the approach.
Many thanks!
Regards.

your approach is good.. is what you should do.. just an advice.. before going to the SNOTE to implement the notes, try to trace the requirements by yourself, to know what you are applying, read carefully the notes and the pre-requisites, after this apply the notes.. this is what I always do to know the impact..
Regards..
Esteban

How to apply SAP Notes

I need to apply SAP notes for Object TRINT_APPEND_COMM
How to apply SAP Notes? pls guide

Hello,
- Transaction SNOTE;
- click on the box "SAP NOTE download";
- enter the note number;
- after the download, the note will appear in the list below; if the note has a blue arrow as a mark, then it is applyable;
- double click on that arrow;
- follow the steps on the screen (which will guide you thru the process, creating a Change Request and so on);
that's it
EDIT: i forgot you must be allowed to apply notes, e.g. you should be a thrusted and authorized user.
Edited by: Matteo Montalto on Nov 3, 2009 11:55 AM

Getting error while implementiong SAP note :Note 1240587 For MDM

Hi Experts,
I am tring to implement Note 1240587 - MDM 5.5 and 7.1 Low performance when MDM workflow is used.
The machine in which our MDM is implemeted is a Unix machine and i have created an executable jar (Including the Coding provided in the SAP note) in my Windows machine, have copied the jar in our MDM server.
when i am trying to execute the jar file i am getting error.
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
        UserSessionContext cannot be resolved or is not a type
        The method createSessionContext(String, String, String, String) is undefined for the type DeleteCompletedWorkflowJobs
        WorkflowTask cannot be resolved
        at DeleteCompletedWorkflowJobs.main(DeleteCompletedWorkflowJobs.java:35)
the coding of DeleteCompletedWorkflowJobs.java class is the same as provided by SAP in note.
Kindly suggest what should be i do in this case.
thanks,
Manjit

Hi,
Have you read the note correctly?
It is clearly mention that
Manual Activity
VALID FOR
Software Component     BBPCRM                        BBP / CRM
Release 400               Until SAPKU40017
Release 500               Until SAPKU50018
Release 520                Until SAPKU52010
Release 700                 Until SAPKU70009
Release 600                 Until SAPKU60009
Release 701                 Until SAPKU70104
Before implementing the automatic corrections from this note, implement Note 1487337 or import the relevant Support Package into your system.
I think This class CL_ABAP_DYN_PRG is not available in your system which comes with support pack mentioned as above or comes with the note 1487337.
So check in se24 whether this class is available or not and if not then apply note 1487337 first and then after apply 1590863.

Applying SAP Notes using SNOTE

Hi,
I have question regarding transaction SNOTE.
I am applying one note in my development system. This SAP note has some manual steps, like create function module in the given function group with the given short text.
If I follow the manual steps mentioned in the note, it ask for Access key while saving the changes.
How to work on the manual steps mentioned in SAP notes?
Regards,
Yogita

Hello Yogia,
It doesn't make any difference. Do it as the Note has Mentioned. If system ask for the access key then you can contact your BASIS people.
They will generate a Key for you.
Thanks,
Chidanand

TP_STEP_FAILURE " ERROR WHILE APPLYING SAP NW 04 SR1 ABA AND BASIS PATCHES

Hi Freinds!!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
I have first applied PI_BASIS patches and middle of it, it displayed the message that pre-requisite are not met i.e. First SAP_BW , SAP_BASIS, SAP_ABAP pathces needs to apply.
While applying SAP_BASIS and SAP_ABA patches... I'm getting the following error message ...
" The import was stopped, since an error occurred during the phase IMPORT_PROPER, which the Support Package Manger is unable to resolve without your input..
After you have corrected the cause of the erro, continue with the import by choosing Support
Package > Improt Queue from the initial screen of the Support Package Manager.
The following details help you to analyze the problem :
-Error in phase : IMPORT_PROPER
-Reason for Error : TP_STEP_FAILURE
-Return Code : 0012 "
....So, what could be the cause of the problem ? Do I need to increase table space through brtools command at ora<sid> ?!!
Pl. help....
Many thanks in advance...
-Rupen Patel

Thanks a lot everybody.
Although I had upgraded Kernel Patch Level from 43 to 155, the real cause was, it seems that was maxed out Oracle Table, ..as I found it through ST22 tr code which inturn displayed a logfile which displayed the details of error. I used brtools to extend the tablespace of a table, reapplied the patches thorugh SPAM and it worked out quite smoothly.
Thanks again and Regards,
-Rupen Patel

Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1

Hi All,
We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed.
Product instance 54 not found
Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
Please suggest if someone has faced this issue.
Thanks
Sunny

Hi Sunny,
You can refer to my first blog on this topic:
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
Hope it helps.
Cheers,
Nicholas Chang

Query designing problem while applying cell properties

Hello Experts,
I have a problem while designing query. Problem is as follow:
I have a calculated field on key figure column. This key figure calculates variance between 2 columns.
for E.g I have 2 columns Budget and Actual and third column is %Variance which should be
1. ((Actual - Budget)/Budget) *100 or
2. ((Budget -Actual)/Budget)*100, depening on some values on the row i should use any of these 2 formulas but the result should be dispalyed in single column % Variance.
how can i change the formula in key figures depending on these conditions. I can achieve this by applying cells but i dont want to do so as it is very complex way to desing these queries.
also let me know applying cells on query affects its performance or not?
Regards,
Nirav

Hi Nitin,
Your reply may help me.
But my exact requirement is not that. Requirement is as follow:
I have created Char. Structure in row which contains few rows as revenue and few rows as expense.
I created them by creating selections. Now in case of expense the variance should be (Budget-Actual)/Budget *100.
In case of revenue variance should be (Actual-Budget)/Budget *100.
So, here i have to find out revenue & expense char. iresspective of which one is greater.
Regards,
Nirav

Modification problems while applying SAP Note manually

Similar Messages

Maybe you are looking for