Modified version is differant from active for ds in test system

Modified version is differant from active version in test system for ds 0FI_AA_12 (unequal sign close to ds).
Once I try to load data to PSA , the system generates the following error :
ds is not replicated
I replicated ds many times , re-transported it but nothing helps

Hi,
After you replicate the datasource,it will become inactive and so you need to activate it again.
Always replicate first and then activate.
Hope it clarifies

Similar Messages

Content Transfer - M version is different from A version

Hi All,
I am new to BI 7.0 and when i am trying to transfer some cubes from the Bi content to the infoarea; though the cubes are getting transffered successfully but i am getting the message that " M version is different from A version". Does this message makes any difference on the functionality of the cube??
Also all the infoobjects of the cube are in a Inactive status. Please provide a solution to it.
Thanks and regards,
Ankur Agarwal

A Version - Active version
D version - SAP delivery version
M version - Modified version
Here is a link that describes BI Content Versions:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Message was edited by: Newbie
Newbie

Exchange Rate Type default different from M for a company code

Dear SAP guru,
Would you shed some light on this?
How would we be able to default/assign a different exchange rate type from M at a company code level?
I have a company code - finance company - that every foreign currenty transaction needs to be translated using different exchange rate type (i.e. daily hedge rate) than other operating companies.
The OB22 screen makes it appear as M rate is specificied as 1st currency in company code, but grayed out and not able to change.
Please help me with your expertise on this.
Kind regards
taro

Hi,
ExRateType is hardcoded in
Main Program     SAPL0F03
Source code of   L0F03I01
*------- Daten zur ersten Hauswährung -
rfcu4-curtp = '10'.
rfcu4-bwer1 = '0'.                                        "AT 23039
rfcu4-kurst = 'M'.               <<<<<
rfcu4-cursr = '1'.
rfcu4-curdt = '3'.
The reason why the assignment of exchange rate type M to the first company code currency is a historical reason. A lot of coding within the SAP system is directly developed under the prerequisite that the exchange rate type for the first company code currency is M.
As you described you want to setup several company codes in one client that all have the same first company code currency but should use different exchange rates. To solve that issue there are 2 ways available:
The first way is that you use the functionality to assign an exchange rate type to a document type. That would mean a lot of work because in that case you would have to define all document types seperatly for
every company code.
The second possible solution is that you use different names for the fist company code currency.
That means for example that you name the first company code currency in company code 0001 USD and in company code 0002 US1. So you can use different exchange rates for the same currency.because in that examle USD and US1 are only different names for the same currency. Using this approach you can have different exchange rates for different companies with the same company code currency by setting only different names even though the exchange rate type M is fix asigend to the first company code currency.
Best Regards,
Gladys xing

Different SAPlogon screen for prd and dev systems

Hi!
I would like to distinguish the SAPlogon screen for production and development systems.
For example:i logged into to the SAP system by SAPlogon and i want to see in the right top corner of the screen the letter P or D, etc.
Could you advise me how to do it?
Thank you!
Dan

I think this can be done but little difficult.
After installing your sapgui, you have to change the picture in the right corner which you can find inside the folder programfiles-sap-sapgui and can search in the picture. If you replace the picture with your picture, you can find it there. But i dont think it can be done seperately for dev, qual and prod systems.
With Regards,

Using a UI different from WebDynPro for Human activity forms

Hi Forum Dwellers
I am currently investigating the possibility of porting our product to use NetWeaver components. Specifically, we currently use TIBCO iProcess for our workflow/bpm engine. We already have a UI with custom forms that go with the steps (SAP: human activity) in each procedure (SAP: process). We would like to keep our UI with its custom forms and rip iProcess out and replace it with NetWeaver BPM. We interact with iProcess using the Java API that comes with it and hope to do the same with NetWeaver BPM through the UWL.
After playing with Process Composer in CE for a while I've come to the conclusion that it is not possible to specify a different UI to use. Or even to not specify a UI at all. Only WebDynPro appears to be supported. Is this correct?
With iProcess I can build the forms in anything, like VB, or VC++, or Java Swing, or, as we eventually did - in TIBCO General Interface.
I've downloaded and installed SAP NetWeaver Developer Studio 7.1 with EHP1 for my investigation.
Regards,
Johan Hoogenboezem

Hi Martin
Thank you for your reply. I'm starting to think I asked the wrong question, though. The focus needs to be on an API. SAP doesn't need to support another ui for NetWeaver BPM. Instead, there should be a comprehensive API for the NetWeaver BPM engine. That way the question about a different UI becomes irelevant. We need an API through which processes can be started, attributes can be retrieved and updated, tasks can be completed and processes can be moved along to the next activities. We also need to be able to retrieve all the tasks for a group of users, or for a single user. etc. etc. etc. Some of these requirements are already satisfied by the UWL api, but some are not. In addition to that, the UWL may be too general.
An API like this is pivotal. It will determine whether we can port our product to NetWeaver or not. We cannot afford to rewrite the UI.
Oh, one more thing, for goodness sake, NO WEB SERVICES! This should be a server-side or standalone Java API.
Regards
Johan Hoogenboezem

Data collection was switched from an AI Config task writing to an hsdl file to synchronized DAQmx tasks logging to TDMS files. Why are different readings produced for the same test?

A software application was developed to collect and process readings from capacitance sensors and a tachometer in a running spin rig. The sensors were connected to an Aerogate Model HP-04 H1 Band Preamp connected to an NI PXI-6115. The sensors were read using AI Config and AI Start VIs. The data was saved to a file using hsdlConfig and hsdlFileWriter VIs. In order to add the capability of collecting synchronized data from two Eddy Current Position sensors in addition to the existing sensors, which will be connected to a BNC-2144 connected to an NI PXI-4495, the AI and HSDL VIs were replaced with DAQmx VIs logging to TDMS. When running identical tests, the new file format (TDMS) produces reads that are higher and inconsistent with the readings from the older file format (HSDL).
The main VIs are SpinLab 2.4 and SpinLab 3.8 in folders "SpinLab old format" and "Spinlab 3.8" respectfully. SpinLab 3.8 requires the Sound and Vibration suite to run correctly, but it is used after the part that is causing the problem. The problem is occuring during data collection in the Logger segment of code or during processing in the Reader/Converter segment of code. I could send the readings from the identical tests if they would be helpful, but the data takes up approximately 500 MB.
Attachments:
SpinLab 3.8.zip ‏1509 KB
SpinLab 2.4.zip ‏3753 KB
SpinLab Screenshots.doc ‏795 KB

First of all, how different is the data? You say that the reads are higher and inconsistent. How much higher? Is every point inconsistent, or is it just parts of your file? If it's just in parts of the file, does there seem to be a consistent pattern as to when the data is different?
Secondly, here are a couple things to try:
Currently, you are not calling DAQmx Stop Task outside of the loop; you're just calling DAQmx Clear Task. This means that if there were any errors that occured in the logging thread, you might not be getting them (as DAQmx Clear Task clears outstanding errors within the task). Add a DAQmx Stop Task before DAQmx Clear Task to make sure that you're not missing an error.
Try "Log and Read" mode. "Log and Read" is probably going to be fast enough for your application (as it's pretty fast), so you might just try it and see if you get any different result. All that you would need to do is change the enum to "Log and Read", then add a DAQmx Read in the loop (you can just use Raw format since you don't care about the output). I'd recommend that you read in even multiples of the sector size (normally 512) for optimal performance. For example, your rate is 1MHz, perhaps read in sizes of 122880 samples per channel (something like 1/8 of the buffer size rounded down to the nearest multiple of 4096). Note: This is a troubleshooting step to try and narrow down the problem.
Finally, how confident are you in the results from the previous HSDL test? Which readings make more sense? I look forward to hearing more detail about how the data is inconsistent (all data, how different, any patterns). As well, I'll be looking forward to hearing the result of test #2 above.
Thanks,
Andy McRorie
NI R&D

Simulation version getting updated from active version

Hi all,
We noticed that in Active Model 000, existing Simulation Versions are getting updated (changed) daily, even though we do not know any job scheduled by us which could do such update. I tried to search for any job running at the time of version change, but could not find through SM37.
Can you guess what could be triggering this change?
Regards,

Hi,
You can see the difference in master data between planning versions. Select 2 planning versions with the Ctrl key, select Additional Functions then Master Data Comparison. Run wide open and check the log. Compare 001 and SM1 then 000 and SM2. Just a thought.
I don't think transactional data differences would affect the "Last Changed" field.
Best Regards,
Mike

How do I stop the Master Password box from activating for sites that are not inclused in the list.

The Master Password Box will request the password for any site that I open including sites that I do not have the password stored.
== This happened ==
Every time Firefox opened
== I entered Gmail or Yahoo

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

What version of flash is best for an older xp system with a P4 processor running 1.6 Ghz?

The system requirements for the current flashplayer is a 2.33 Ghz CPU, I have an older xp system with a P4 processor running 1.6 Ghz? What version of flash should I be running? I am using both IE and Firefox (various versions).

Hello,
Welcome to Adobe Forums.
You can download older version of Adobe Flash Player (10.2 or 10.1) from Flash Player Archive (http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html)
Thanks,
Vikram

Iphone 6 plus pairing. 2014 Chevy Silverado. Music plays and no phone activity for the hands free systems

Is there a fix out there for this connectivity problem for the phone?

Hello dalefromlowell,
The article linked below details a number of steps that can help restore your ability to make and receive calls via your vehicle's Bluetooth system.
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/HT6473
Cheers,
Allen

Base unit of measure is different from Idoc to purchase order toSAP System.

Hi Gurs,
vendor send a purchase order for confirmation through EDI, the base unit of measure in the Idoc is PA( Parcel). For this same material the unit of measure in R/3 system is PC.( Piece). I got a error on this.I checked in CUNI, In Unit of measurement ST (PC) is already assigned to unit PCE in EDI. But i dont want to change the Conversion.I need this also and I want to create a new conversion ST(PC) is assign to PA( Parcel).
Please help in this.
Is it possible to maitainthe ISO-code PA into table Units of Measurement of Dimension?
Edited by: Vadivel Karalam on Nov 1, 2010 1:13 PM

Hi,
You are getting the error because as part of the std ( For ALE/EDI) the unit of measurement that is maintained is PC whereas if you look at another unit of measure that you have mentioned, the std doesn't define anything under the ALE/EDI setup.
Because of that all the conversions are coming with PC. So pls goto general settings and check unit of measure menu. There for each of your units, there is a section for ALE/EDI, set up the relevant UoM and the issue should get resolved.
Hope it helps.

Backint/brrestore for refresh of test system?

We have a sandbox system that we refresh periodically from production. All systems are running Oracle 9.2. We use the backint interface and brbackup (called from DB13) to back up the production system daily, but we do not back up the sandbox.
To refresh the sandbox system, I copy down the latest online backup of the production system and perform database recovery. We've had some performance problems in the restore, and our backup system vendor (Legato) has advised me that I should use brrestore instead of Legato's recover utility to get the files back from tape.
Here's the question: Can I use brrestore to restore files from a backup of a different system? And if so, what is the procedure? With the Legato tool, I can easily pull down files from a different database and relocate them wherever I like. Can brrestore do this?
Thanks for your help.
Eva Blinder
Sonopress LLC, Weaverville, NC USA

Dear Eva,
I use Legato as Backup tool on My windows environment.
I have understood you need to perform a restore keepind the same Oracle sid.
You have to launch a brrestore on the target server passing a .utl file ( example restore.utl in the directory %ORACLE_HOME%\database\ ) similar at the .utl file ( example backup.utl ) you have used to backup the database on source server.
In the Restore.utl you have to add the parameter:
client = servername.xxx.yyy.zzz
This is the client who have performed the backup of the database. On the legato server you have to modify the definition of the client of the source server. In the remote administration tab you have to add the target server as remote administrator of the source server.
After that you have:
1.Check that in the file init<TARGET_SID>.ora the rollback segment are the same than in the file init<SOURCE_SID>.ora ( I think are the same because you have already done other restore )
2.Copy from <SOURCE_server> a <TARGET_server> the last file .aff + and the file .log under directory sapbackup
3. On the <TARGET_server> modify file .log. You have to keep only the row relative to file .aff you have copied for the restore
4. Optionally: you can modify the file .aff if you wanto to distribute sapdata file on different drive letters on the target server
5. Run on the <TARGET_server>: brrestore -m all -d util_file r %ORACLE_HOME%\database\restore.utl -c
It seems difficult. The first time we launched the restore we spent a day only to understood the procedure.
Now we restore 200 Gb of database in 2 hour.
Kind regards
Mauro

Multi gesture for browsers different from safari

Multi gesture for browsers different from safari, for example right to left scroll to previous page. How to set it like in Snow Leopard?

THe only gesture to change tabs is to tap the tab in the address bar. You can go back a page in a website by holding one finger on the left side of the screen and swiping right. You can go back to a previous app by placing four fingers on the right side of the screen and swiping left.

Migration from Eudora for Windows to Eudora for Mac

Has anybody within the sound of my keystokes ever migrated Eudora from the PC to Mac?
I have to use Eudora for my work, and while I know I can run it in my Parallels XP Window, I really want to run as little software in Windows as possible so I'm trying to get Eudora to run in OSX. I downloaded the software and it works fine but I have not been able to import my many e-mailboxes from the Windows installation to the Mac.
The problem actually looks very much like the result I got when I tried to import Eudora folders and mailboxes into Apple Mail: the folders showed up, but none of the messages.
With the Eudora/Win to the Eudora/Mac import, none of the mailboxes or individual messages showed up.
Maybe somebody who's reading this has some idea what a simple fix might entail. I'm impressed with how quickly responses show up here, so I've got my fingers crossed.
Thanks,
--PS

OK, here's a variation on the same idea.
Inside the My Email folder on the PC, are there individual mailbox files, and are they where the actual content of your past email is stored? To check on the latter question, duplicate one of those files on the PC (so you won't have to work with the original file) and open the copy in a text editor such as WordPad. Does the content of the messages in the mailbox appear?
If not, then Eudora for Windoze apparently keeps its mailbox files quite differently from Eudora for Mac, and I don't know what to suggest or where on your PC you might look for the message content. If this proves to be the case, I guess I'd have to suggest that using Eudora for Windoze in Parallels may be the best way to go.
If the content is there in the mailbox file, Quit WordPad without changing the file at all. Try copying that mailbox file (not the whole enclosing folder) over to the Mac and putting it into Eudora's Mail Folder. (Make sure first that it doesn't have the same filename as any of your existing Eudora Mac mailboxes.) Then open Eudora and see whether that mailbox appears in the mailbox list, and whether the messages in it can be displayed.
If that doesn't work either, you may want to compare the structure of the Windoze-based mailbox file with the structure of Eudora for Mac's mailbox files, and see whether there's some relatively simple modification(s) you could make to your Windoze files so they'd conform to Eudora Mac's expectations of a proper mailbox file. I would open both files in separate windows, side by side, in a text processor such as TextWrangler (free, fast and enormously powerful, with terrific Find/Replace capabilities), and see what it would take to put the Windoze file into the same form as the Mac file. The comparison with be greatly simplified if you create a new mailbox on your PC, send yourself two or three short test messages, and save them in that mailbox. Then do exactly the same thing on the Mac. Copy the Windoze file to the Mac, and use those two files — which should be as similar as they possibly can be, given the two different platforms — for the comparison. I'll be interested to hear the results.
BTW, it has taken me something over an hour, what with waiting through nine-minute Discussions page loads this morning, to reach the point of clicking the Post button for this reply. I may not be able to help you in the end, but it isn't for lack of persistence.

Why does an Inbound IDoc no change and differs from an Outbound IDoc no?

Hi Experts,
This seems to be a basic question..! But can someone kindly clarify why an IDoc number gets changed when sent from one R/3 system to another R/3 system and how does this happen???
i.e., whenever an IDoc was triggered from R/3 system A to R/3 system B through XI/PI, the Inbound IDoc number (in system B) differs from the Outbound IDoc number (in system A)... Why does this happen and how???
Thanks in advance!
Br,
G@nesh

Hi Ganesh,
The IDOC numbers are always Unique,
IDOC can be generated in SAP system as a result of internal testing (WE19), or
can be posted from a non sap system (say PI).
So every time a new IDOC comes, it is assigned a new number to avoid confusion and also this plays a
critical role in the end to end testing and validation.
If you look at the control record of the IDOC you can see a element called DOCNUM. this stores to actual IDOC number.
from PI side you can use IDX5 and in ECC We02/05 to notice the idoc numbers.
Regards,
Srinivas

Modified version is differant from active for ds in test system

Similar Messages

Maybe you are looking for