Modifier Key Mapping Not Working

When I'm at home, I connect my MacBook Pro to a 24" LCD, along with an external keyboard and mouse. One of the small features I was looking forward to in Leopard was not having to go into System Preferences and switch the modifier keys to correctly work with my external keyboard, but I've discovered that the feature isn't working. I choose "USB Receiver" from the keyboard drop-down, re-map the Option and Command keys, click OK, and close SysPrefs. Nothing has changed; the Command key on my keyboard is still performing as Option and Option is still Command. When I go into the Keyboard & Mouse section of SysPrefs, the Modifier Keys pane is back to it's default values. I'm wondering if this is a bug in 10.5 that will be fixed with 10.5.1, or if it's just my keyboard. Any tips would be greatly appreciated!
Message was edited by: bradbergeron
Message was edited by: bradbergeron

Any updates on this bug?
On my Powerbook, I have to swap the modifier keys under the "All" setting to make the change take effect on the external USB keyboard I'm using. Changing modifier keys on just the "DELL USB KEYBOARD" (in my particular case) has no effect.
It's just a minor annoyance (having to reset my modifier keys back to defaults when I need to use the built-in keyboard), but all the same the feature doesn't appear to work as it should.
Or is it just me?

Similar Messages

Hp t510 right alt key mapping not working with ctrl + s

Using the HP t510 to launch a xendesktop session via storefront. We have a mission critical application that uses the ctrl + alt + s hotkey to secure itself. The left alt key with ctrl + s is working as it should but the right alt key does not. When testing in the win7 on screen keyboard the right alt and ctrl stay lit up. When hitting the S key after depressing both the right alt + ctrl (right or left ctrl doesn't matter) the alt keys disappear from the on screen keyboard as if they were no longer pushed. They hotkey combination never makes it to the application and it does not secure itself.
I've tested this same workflow on an ASUS thin client, desktop, and laptop hardware with no issues. It does in fact seem to be some hotkey mapping the HP device has baked into it using the right alt key.
Has anyone seen any issues that even closely mimic this? I've seen some for ctrl + alt + del but their fixes don't work for this specific issue.

Hello xXenStatex,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the alt key mapping is not working with ctrl + s on your Thin Client, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/bd-p/bsc-635
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Modifier Keys suddenly not working with Numberpads

I favor the use of a numberpad and as such i have been using a third party USB Numberpad. I also have a Apple wired keyboard that comes with the number pad.
All these while, the modifier keys (shift, alt, ctrl) works with the numberpad and the numberpad section of the apple keyboard. Somehow, recently, not sure when, it no longer works.
I've tried to reset default on the modifier key section but it just doesn't work... This is really frustrating. the only thing i remember installing lately is "bettertouchtool" and buying a magic mouse.
Bettertouchtool is not usually running unless i choose to run it, so i'm not sure how that affecs it, not am i sure if totally removing it via a third party app helps.
Appreciate HELP! PLEASE!

i am having the same problem. It just started a few days ago. Im thinkin its a problem with the most recent update. Im goin to contact apple to let them know. I'll post again when i hear something. If anyone figures it out before then please let us know!

Key mapping not working in FB4

In Windows/Preferences/General/Keys.. I've built the following key mapping. I want to be able to press F9 key on my keyboard, and, whether I'm in Source editor view, or MXML design view, I want to start the compile and run process. But I can't get it to work. I've set the preference, and shut down and restarted FB4 several times. Here is the mapping. What am I doing wrong?
Run... F9 ... Editing Flex Source
Run... F9 ... In MXML Design Mode.
Neither works.

DOH! I found the answer...
Run Web Application..... F9 ..... In Windows
works.
(Easier than Alt-Shift-X, F) (Although I left that one in there too)

Modifier Keys will not work in Apple applications

I am very puzzled by this problem. The shift, command, option , and caplock keys have no effect in any Apple program. They work fine in other applications like photoshop, illustrator, neo office, firefox and thunderbird.
I reinstalled the tiger 10.4.3 update, repaired permissions, and used diskwarrior from another hard drive.
The other strange thing is that the Dashboard icon no longer appears in the dock.
Logged in as a different user and there is no problem. Is there a preference file that I need to remove?
Please help.

Yes Application Enhancer is a very update sensitive program. When installing anything from http://www.haxies.com/ also known as http://www.unsanity.com/ and the sites which depend on their software, always verify that your addons to the Finder are compatible with a future system update before updating to the new system.

New Apple Keyboard Launchpad F4 key does not work

New Apple Keyboard Launchpad F4 key does not work
Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
Maybe someone can help me!!
Thank you
greeting

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

Modifer keys do not work with mouse in Illustrator

Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again

My Escape key is not working

Hi,
I am Meena.
I am doing a project using NetBeans and MS-Access.
When I run my project a internal framed named login loaded on the jdesktoppane which in JFrame.
So in the login internal frame i used two buttons one for Sign-in and another for sign out.
So I combined the Sign-in button with Enter key and Sign-out button with Escape key by the following coding.
I wrote the following coding in LoginInternalFrame->properties->enabled->advanced->Generate PreIntialization Code.
Action EscFromLogin=new AbstractAction()
public void actionPerformed(ActionEvent e)
    jButton2.doClick();
Action OkFromLogin=new AbstractAction()
    public void actionPerformed(ActionEvent e)
       jButton1.doClick();
getRootPane().getInputMap(jButton2.WHEN_IN_FOCUSED_WINDOW).put(KeyStroke.getKeyStroke(KeyEvent.VK_ESCAPE,0,false),"Esc_in_Login");
getRootPane().getActionMap().put("Esc_in_Login",EscFromLogin);
getRootPane().getInputMap(jButton1.WHEN_IN_FOCUSED_WINDOW).put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER,0,false),"Ok_in_Login");
getRootPane().getActionMap().put("Ok_in_Login",OkFromLogin);In the above coding Enter key works well no problem.that is when I press the Enter key ,it combined with Sign-in button and works well.
But when I press Escape key,it doesnot combined with Sign-off button.
that is nothing is happening when I press Esc key.
So i change the Escape key and test with F1 then F2 then F3 all are combined with Sign-off button and works well.But only the escape key is not working.
But I have so many internal frames .In all internalframes my esc key works well.But not in the first inter frame(login internalframe)
I couldnot understand the reason.
Will you please help me to solve.
Thank you so much.
Meena

mmm, i'm doing some tests and the case is working for me... The reason F1,F2 keys works while ESC don't is that some component is "eating" the ESC key. Probably your password textField, but it is not its default behaviour. For example, try to replace the textField with a FormattedTextField, write something into it and press ESC, this first ESC is consumed by the FormattedTextField, if you press ESC a second time the FormattedTextField not consume it, so the ESC keystroke processing is given to the rest of the componentes until one of they consume it (basically). So, how can you solve th problem? Try to determine which component is the "escape-eater". Once you detected it try to determine which properties are set and if this properties can alter the keyboard mapping. The problem can be difficult to repeat for us because the look and feel, java version, etc. can affect the system behaviour too. A global hook to ESC can also be the reason (maybe esc key it's not reaching ths components), try to override ProcessKeyBindings and log the results....

Keyboard keys are not working

Im on mac OS X 10.6.8 several keyboard keys are not working. For instance the at symbol is not working or question mark and random other punctuation keys. The problem started after running some code from terminal to trun off mouse acceleration and then installing a plug-in to control more accurately the mouse funtions. Ive since uninstalled the plug in and disabled the adjustment in terminal. Ive checked all the normal keyboard funcions to make sure settings were not funky. When I log out and log in as a differnt user the problem with the keyboard is fixed. Someone please help
Code I ran
defaults write .GlobalPreferences com.apple.mouse.scaling -1
http://www.lockergnome.com/osx/2011/07/13/how-to-turn-off-mouse-acceleration-in- os-x/

Hello lindzthecreator,
I suggest this part of the article named One or more keys on the keyboard do not respond found here http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
All the very best,
Sterling

Modify statment is not working.

Hi Experts,
I have a small query, modify statment is not working properly, Maybe my syntax wrong. Kindly suggest me.
      DESCRIBE TABLE it_marc1 LINES count.
      IF count = 1.
        LOOP AT it_marc INTO wa_marc where sernp ne space.
          READ TABLE it_stpo INTO wa_stpo WITH KEY idnrk = wa_marc-matnr.
          IF sy-subrc = 0.
            wa_stpo-potx2 = c_primary.
            MODIFY table it_stpo FROM wa_stpo TRANSPORTING potx2.
          ENDIF.
        ENDLOOP.
      ENDIF.
Mohana

Hello,
Add the index addition and check
DESCRIBE TABLE it_marc1 LINES count.
      IF count = 1.
        LOOP AT it_marc INTO wa_marc where sernp ne space.
          READ TABLE it_stpo INTO wa_stpo WITH KEY idnrk = wa_marc-matnr.
          IF sy-subrc = 0.
            wa_stpo-potx2 = c_primary.
            MODIFY table it_stpo FROM wa_stpo TRANSPORTING potx2 INDEX sy-index. " here
          ENDIF.
        ENDLOOP.
      ENDIF.
Vikranth

Arrow keys suddenly not working!

Two arrow keys, right and up, suddenly stopped working on my black Macbook. I had this problem a week ago, then upgraded from Snow Leopard to Lion and they worked again. Not now. They won't work with modifying keys either! Someone please help me.

If a number of keys are not working, it is probably a defective keyboard. Having a different keyboard setting would cause different characters to show up, not not work. You are going to need to get the keyboard replaced. If the computer is still under warranty, do it as soon as possible. But if they find a spill on the keyboard, expect to be charged. In the meantime, an external USB keyboard does work well on these Toshibas.

Caps lock key does not work...

my caps lock key was working perfectly up until 10-15 minutes ago.
when i press my caps lock key, the little light on the key does not turn on and all of my letters remain in lowercase.
i thought perhaps something was stuck underneath the key, but when i took the key off - nothing was there. i placed it back on and still the caps lock key does not work.
does anyone have any ideas as to why the problem could be and how to fix it?

Finally found something that worked for me. See this thread and look for the post about removing the Hitoolbox plist files.
http://discussions.apple.com/thread.jspa?messageID=10765093&#10765093
I removed all of them. (Had multiples) Also make sure you empty the trash afterwards.
Then restart.
Then I used the modifier key trick in this thread. Turned off the caps lock key. Then restart.
Then use the modifier key trick and turn the caps lock key back on. Test to see if your lights come back on for the caps lock key.
If so, next time you restart it should still work. Finally. This thing has been dogging me for a long time.

F4 help key does not work in ESS on ITS in Portal

Hello All,
F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
regards,
Saumya

Hi,
This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
You have to set parameter ~webgui_popups 1 in the service file of this IAC.
BR,
Disha.
Pls reward points for helpful answers.

ABAP/4 Key is not working in BI 7.0 version

Hello,
Some reason my ABAP/4 key is not working on BI 7.0 few months back I created few ABAP programs
When i try to create a new program using t-code SE38 and program name as 0201 then create button then system will ask ABAP key when i enter its giving error message "incorrect entry"
What would be the reason?
Thanks

well, normally a report has to start with Z or Y. So what key is system asking for? Developer key, which you have already entered a few month ago, or a 'modification' key?
Are you creating this report with the same user name?
Have a look at table DEVACCESS in transaction SE11. here you will find all the users and there developer keys.
Are you creating these report on the same installation as a few month ago, or did something change in the mean time?
Edited by: Micky Oestreich on May 6, 2008 10:01 PM

My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help :(

My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help

- If the "other" account has administrative privileges then just try changing the PW for your account.
- Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode
Reset mac mini admin password: Apple Support Communities
- If the problem is due to a bad KB just get a new KB

Modifier Key Mapping Not Working

Similar Messages

Maybe you are looking for