Modifiers in Collection List Renderer to display word wrapping

Hello
Is it possible to display the folder/files description in word wrap mode?
I set the parameter "rndVisibleProperties" with the following value: rnd:image(alignLeft/contentLink/alignBaseline), rnd:displayname(contentLink/[2;1])+rnd:action, rnd:description(alignLeft/maxChars=7).
Thereby the folder/file description is displayed normally in no word wrap mode.
I tryed also "rnd:description(alignLeft/wrapping/maxChars=7)" but it doesn't work.
Is there a valid modifier or an other solution to solve my problem?
Thanks for answers
Regards Michael

Hi Brijesh
Thank you very much. Now my porblem is solved.
When I combine the modifiers "width" and "maxChars" so now it is possible to format a nice page. --> see below
rnd:image(alignLeft/contentLink/alignBaseline), rnd:displayname(contentLink/[2;1]/width=40/maxChars=20)+rnd:action, rnd:description(alignLeft/[3;1]/width=40/maxChars=20)
Regards
Michael

Similar Messages

Displayed Properties in Collection List Renderer are not displayed

Hello All,
I have created one custom property and entered the value for a resource which had that property.
Now, when I am trying to display the custom property in any layout, its not coming, even though I have added the property name in the Displayed Property of the collection list renderer.
To check the view is taking the correct layout or not, i changed some other settings of the collection list renderer and the changes are immediately getting reflected. What could be the problem here?
Any help, deeply appreciated
Regards
BP

Hello Bobu,
Are you using a different Namespace Alias other than 'Default' in your property definition? If so then you need to specify the property in the 'Displayed Properties' parameter of the collection renderer as <NamespaceAlias>:<propetrty ID>, e.g. rnd:displayname.
Other than that you should check the 'Folder Validity Patterns' and 'Document Validity Patterns' to make sure they are valid for the content on which you are trying to display this property, you may have already checked this.
Regards,
Lorcan.

Portal Collection List Renderer - problem with alignment

Dear All,
I'm having an issue with alignment of columns when changing a Layoutset.
This modification is all done with SAP standard components, so I decided to try my luck here first at SDN before writing an OSS message.
Here's what is happening:
I want to have the KM files listed like this:
(as I can't put a printscreen, I will put it on text for you to have an idea)
FILENAME..................MODIFIED...........................MODIFIEDBY
...file1..........................xx/xx/xxxx..........................aaaaaaaa
Description of file1 here....
file2.............................xx/xx/xxxx..........................aaaaaaaa
Description of file2 here....
file3.............................xx/xx/xxxx..........................aaaaaaaa
Description of file3 here....
To obtain this I'm changing the standard object AdminCollectionListRenderer
I do this by going to KM configuration and change this SAP standar object on
Collection List Renderer Settings > AdminCollectionListRenderer
    Flavor:
      From: List
      To: Not Set
    Displayed Properties:
      From: rnd:icon,rnd:displayname(contentLink)+rnd:action,contentlength,rnd:lock,modified,modifiedby
      To: rnd:displayname(contentLink),rnd:lock,modified,modifiedby,rnd:description(\[2;1-1\]/noTitle/maxChars=300)
The result is ok, but there's a very small detail that doesn't disappear no matter what I do.
If you go to the txt above, the "file1" is ALWAYS one blank space to the right. It's not aligned with the
other items on the list.
Has anyone experienced this ?
Is there any solution ?
Kindest Regards
/Ricardo Quintas

Check in your type preferences. Apply leading to entire paragraphs will fix this. It's likely that the return at the end of your last line has a larger point size assigned to it, and it's throwing your leading off.

How to make items in a list word wrap as needed and be variable heights

I am trying to build a custom itemrenderer for the List control. The items in the list are variable lengths of text, some of the text items will have different colors determined at runtime base on some criteria (this works fine now with my custom itemrenderer). What I need is for the items to word wrap, and therefore for the list to display items of varying heights. Is this possible to do? All my attempts seem to have failed. If I can't do this with an item renderer any suggestions about how to do this? Thanks very much in advance to any of you gurus who are able to help me.

Trick here is not to specify any height for the renderer so that Flex will determine the height according to the content. Also set the variableRowHeight="true"
Here is a simple example
<mx:ArrayCollection id="dp">
        <mx:Array>
            <mx:Object label="some very long text"/>
            <mx:Object label="some very loooooooooooooooooooooooooooooooooong text"/>
            <mx:Object label="some very loooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong text"/>
            <mx:Object label="some very looooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong text"/>
            <mx:Object label="some very long text"/>
        </mx:Array>
    </mx:ArrayCollection>
    <mx:List dataProvider="{dp}" variableRowHeight="true">
        <mx:itemRenderer>
            <mx:Component>
                <mx:Canvas width="100%">
                    <mx:Text width="100%" text="{data.label}"/>
                </mx:Canvas>
            </mx:Component>
        </mx:itemRenderer>
    </mx:List>

Email list will not display individual addresses and names , only name of list.

First time user of lists. I created a new email list per help instructions-- created just fine. When I try to use it to write, no matter which methods I use, only the list name is displayed. It does send the email to all the addresses, but I want to be able to see all the individual addresses so bcc or removal etc. can be used prior to sending. Any suggestions?

Does the list description include spaces? If so, try to use a name without spaces or replace spaces with "_", there has been a bug about this reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
Several other people have sent in the similar support requests to yous, noting this happened after they upgraded to version 31.1.
The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
Is that what you see?
'''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
* While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
* Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
* Downgrade to a previous version and disable automatic updates (Windows)

IE02 services for object- How to collective list attachment by many equip?

Hi all,
IE01/IE02 i create attachment by services for object for equipment.
But I want to collective list attachment by equipment, not by individual equip to display.
How to do that? or which table can i find the info?
thanks a lot

derek,
I don't think there are any [Generic Object Services|http://help.sap.com/erp2005_ehp_04/helpdata/EN/be/3fe63659241157e10000009b38f889/frameset.htm] (GOS) transactions to mass update objects...
I suspect you would need to develop a custom BDC program for this purpose.
PeteA

Read sharepoint list items and display it inside a div in aspx page

So I have this sample aspx page with this design:
<div class="column1">Events</div>
<div class="column2">Details</div>
<div class="column3">Contact</div>
Now, I want to dynamically change the words (Events, Details, COntacts) depending on the content of my "Columns" sp list.
how can I do this?
----------------------- Sharepoint Newbie

Place the label controls in the div tags like
<div class="column1">Eventslabel</div>
<div class="column2">Detailslabel</div>
<div class="column3">Contactlabel</div>
public void ReadList() {
  // Use using to make sure resources are released properly
  using(SPSite oSite = new SPSite(pathToSite)) {
    using(SPWeb oWeb = oSite.AllWebs[nameOfWeb]) {
      // Alternately you can use oSite.RootWeb if you want to access the main site
      SPList oList = oWeb.Lists[listName];  // The display name, ie. "Calendar"
      foreach(SPListItem oItem in oList.Items) {
        // Access each item in the list...
//Bind the values to label
        // etc....

How can we modify alv output list

Hi
this is fazil.
Please tell me any body How can we modify alv output list.
Thanks & Regards
Fazil
[email protected]

Fazil,
check the program,
You can find the code in this program 'BCALV_FIELDCAT_TEST'
*& Report BCALV_FIELDCAT_TEST                                         *
This report allows to modify the fieldcatalog of a corresponding
output table and to view the effects of your changes directly.
Note that for some changes you need to newly display the whole
ALV Grid Control, e.g., DDIC-Fields are read only the first time
you call SET_READY_FOR_FIRST_DISPLAY.
Note also that not all scenarios can be tested since the output
table does not comprise all fields to test available features
of the fieldcatalog. Copy this program and extend the output
table accordingly if you want to test such a special feature.
(The field CARRNAME in 'gt_sflight' was added to test field REF_FIELD
and TXT_FIELD of the fieldcatalog - see what happens if you
calculate subtotals by carrier-id).
report bcalvt_fieldcatalog           .
data: ok_code               type sy-ucomm,
      save_ok_code          type sy-ucomm,
fieldcatalog for output table
      gt_fieldcat           type lvc_t_fcat,
fieldcatalog for fieldcatalog itself:
      gt_fcatfcat           type lvc_t_fcat,
      gs_fcatlayo           type lvc_s_layo.
Output table
data: begin of gt_sflight occurs 0.
data: carrname type s_carrname.
        include structure sflight.
data: end of gt_sflight.
data: g_max type i value 100.
data: g_all type c value SPACE.
Controls to display gt_sflight and corresponding fieldcatalog
data: g_docking type ref to cl_gui_docking_container,
      g_alv     type ref to cl_gui_alv_grid.
data: g_custom_container type ref to cl_gui_custom_container,
      g_editable_alv     type ref to cl_gui_alv_grid.
LOCAL CLASS Definition
class lcl_event_receiver definition.
public section.
    methods handle_data_changed
      for event data_changed of cl_gui_alv_grid
      importing er_data_changed.
endclass.
class lcl_event_receiver implementation.
method handle_data_changed.
at the time being, no checks are made...
endmethod.
endclass.
data: event_receiver type ref to lcl_event_receiver.
end-of-selection.
set screen 100.
*&      Module STATUS_0100 OUTPUT
      text
module status_0100 output.
set pf-status 'BASIC'.
set titlebar 'BASICTITLE'.
create ALV Grid Control in the first run
if g_docking is initial.
    perform create_and_init_controls.
endif.
endmodule.                             " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
module user_command_0100 input.
save_ok_code = ok_code.
clear ok_code.
case save_ok_code.
    when 'SUBMIT'.
set the frontend fieldcatalog
ATTENTION: DDIC-Fields are not updated using this method!
(see 'RESTART')
      call method g_alv->set_frontend_fieldcatalog
           exporting
             it_fieldcatalog = gt_fieldcat.
      call method g_alv->refresh_table_display.
      call method cl_gui_cfw=>flush.
    when 'RESTART'.
Destroy the control currently visible and display it again
using the changed fieldcatalog.
      perform restart_sflight.
    when '&ALL'.
      perform switch_visibility.
endcase.
endmodule.                             " USER_COMMAND_0100 INPUT
*&      Form CREATE_AND_INIT_CONTROLS
      text
--> p1        text
<-- p2        text
form create_and_init_controls.
create object g_docking
      exporting
           dynnr = '100'
           extension = 150
           side = cl_gui_docking_container=>dock_at_bottom.
create object g_alv
      exporting
           i_parent = g_docking.
create object g_custom_container
      exporting
           container_name = 'CC_0100_FIELDCAT'.
create object g_editable_alv
      exporting
           i_parent = g_custom_container.
register events
create object event_receiver.
set handler event_receiver->handle_data_changed for g_editable_alv.
call method g_editable_alv->register_edit_event
                exporting
                   i_event_id = cl_gui_alv_grid=>mc_evt_modified.
perform build_fieldcatalogs changing gt_fieldcat gt_fcatfcat.
perform modify_fieldcatalog changing gt_fcatfcat.
perform select_data.                 "CHANGING gt_sflight
call method g_alv->set_table_for_first_display
          changing
               it_outtab       = gt_sflight[]
               it_fieldcatalog = gt_fieldcat[].
optimize column width of grid displaying fieldcatalog
gs_fcatlayo-cwidth_opt = 'X'.
Get fieldcatalog of table sflight - alv might have
modified it after passing.
call method g_alv->get_frontend_fieldcatalog
            importing et_fieldcatalog = gt_fieldcat[].
call method cl_gui_cfw=>flush.
Display fieldcatalog of table sflight:
call method g_editable_alv->set_table_for_first_display
          exporting
               is_layout       = gs_fcatlayo
          changing
               it_outtab       = gt_fieldcat[]
               it_fieldcatalog = gt_fcatfcat[].
register events
create object event_receiver.
set handler event_receiver->handle_data_changed for g_editable_alv.
endform.                               " CREATE_AND_INIT_CONTROLS
*&      Form restart_sflight
      text
--> p1        text
<-- p2        text
form restart_sflight.
data: ls_fieldcat type lvc_s_fcat.
free g_docking and thus g_alv
call method g_docking->free.
clear g_docking.
clear g_alv.
create new instances
create object g_docking
      exporting
           dynnr = '100'
           extension = 150
           side = cl_gui_docking_container=>dock_at_bottom.
create object g_alv
      exporting
           i_parent = g_docking.
This is an internal method to invalidate all fields in the fieldcat
loop at gt_fieldcat into ls_fieldcat.
    clear ls_fieldcat-tech_comp.
    modify gt_fieldcat from ls_fieldcat.
endloop.
Newly display the list with current fieldcatalog.
call method g_alv->set_table_for_first_display
          changing
               it_outtab       = gt_sflight[]
               it_fieldcatalog = gt_fieldcat.
Get fieldcatalog - it might be changed by ALV in the last call
call method g_alv->get_frontend_fieldcatalog
          importing
               et_fieldcatalog = gt_fieldcat[].
call method g_editable_alv->refresh_table_display.
call method cl_gui_cfw=>flush.
endform.                               " restart_sflight
*&      Form select_data
      text
--> p1        text
<-- p2        text
form select_data.
data: lt_sflight type table of sflight with header line,
        ls_scarr type scarr.
select data of sflight
select * from sflight into table lt_sflight up to g_max rows.
copy data to gt_sflight and update CARRNAME
loop at lt_sflight.
    move-corresponding lt_sflight to gt_sflight.
    select single * from scarr into ls_scarr
       where carrid = gt_sflight-carrid.
    gt_sflight-carrname = ls_scarr-carrname.
    append gt_sflight.
endloop.
endform.                               " select_data
*&      Form BUILD_FIELDCATALOGS
      text
     <--P_GT_FIELDCAT text
     <--P_GT_FCATFCAT text
form build_fieldcatalogs changing p_fieldcat type lvc_t_fcat
                                  p_fcatfcat type lvc_t_fcat.
data: ls_fcat     type lvc_s_fcat.
Fieldcatalog for table SFLIGHT: p_fieldcat
generate fieldcatalog automatically
call function 'LVC_FIELDCATALOG_MERGE'
      exporting
           i_structure_name       = 'SFLIGHT'
        I_CLIENT_NEVER_DISPLAY = 'X'
       changing
            ct_fieldcat            = p_fieldcat[]
   EXCEPTIONS
        INCONSISTENT_INTERFACE = 1
        PROGRAM_ERROR          = 2
        OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
shift all column positions to the right except for MANDT
loop at p_fieldcat into ls_fcat.
    if ls_fcat-fieldname ne 'MANDT'.
      add 1 to ls_fcat-col_pos.
      if ls_fcat-fieldname = 'CARRID'.
        ls_fcat-txt_field = 'CARRNAME'."link CARRNAME to CARRID
      endif.
      modify p_fieldcat from ls_fcat.
    endif.
endloop.
create a new line for CARRNAME in p_fieldcat
clear ls_fcat.
ls_fcat-fieldname = 'CARRNAME'.
ls_fcat-ref_table = 'SCARR'.
ls_fcat-col_pos = 1.
insert new line before CARRID (do not forget MANDT!).
insert ls_fcat into p_fieldcat index 1.
Fieldcatalog for table LVC_T_FCAT:p_fcatfcat
Generate fieldcatalog of fieldcatalog structure.
This fieldcatalog is used to display fieldcatalog 'p_fieldcat'
on the top of the screen.
call function 'LVC_FIELDCATALOG_MERGE'
      exporting
           i_structure_name       = 'LVC_S_FCAT'
        I_CLIENT_NEVER_DISPLAY = 'X'
       changing
            ct_fieldcat            = p_fcatfcat[]
   EXCEPTIONS
        INCONSISTENT_INTERFACE = 1
        PROGRAM_ERROR          = 2
        OTHERS                 = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Hide all fields that are not documented (valid for release 4.6A)
perform hide_fields changing p_fcatfcat.
endform.                               " BUILD_FIELDCATALOGS
*&      Module EXIT_PROGRAM INPUT
      text
module exit_program input.
leave program.
endmodule.                             " EXIT_PROGRAM INPUT
*&      Form MODIFY_FIELDCATALOG
      text
     <--P_GT_FCATFCAT text
form modify_fieldcatalog changing p_fcatfcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
loop at p_fcatfcat into ls_fcat.
    ls_fcat-coltext = ls_fcat-fieldname.
    ls_fcat-edit = 'X'.
    if ls_fcat-fieldname = 'COL_POS' or ls_fcat-fieldname = 'FIELDNAME'.
      ls_fcat-key = 'X'.
    endif.
    modify p_fcatfcat from ls_fcat.
endloop.
endform.                               " MODIFY_FIELDCATALOG
form hide_fields changing p_fieldcat type lvc_t_fcat.
data: ls_fcat type lvc_s_fcat.
Only show documented fields of fieldcatalog.
For a documentation choose "Help->Application Help" in the menu.
loop at p_fieldcat into ls_fcat.
    if not (
         ls_fcat-fieldname eq 'CFIELDNAME'
    or   ls_fcat-fieldname eq 'COL_POS'
    or   ls_fcat-fieldname eq 'COLDDICTXT'
    or   ls_fcat-fieldname eq 'COLTEXT'
    or   ls_fcat-fieldname eq 'CURRENCY'
    or   ls_fcat-fieldname eq 'DD_OUTLEN'
    or   ls_fcat-fieldname eq 'DECIMALS_O'
    or   ls_fcat-fieldname eq 'DECMLFIELD'
    or   ls_fcat-fieldname eq 'DO_SUM'
    or   ls_fcat-fieldname eq 'DRAGDROPID'
    or   ls_fcat-fieldname eq 'EDIT_MASK'
    or   ls_fcat-fieldname eq 'EMPHASIZE'
    or   ls_fcat-fieldname eq 'EXPONENT'
    or   ls_fcat-fieldname eq 'FIELDNAME'
    or   ls_fcat-fieldname eq 'HOTSPOT'
    or   ls_fcat-fieldname eq 'ICON'
    or   ls_fcat-fieldname eq 'INTLEN'
    or   ls_fcat-fieldname eq 'INTTYPE'
    or   ls_fcat-fieldname eq 'JUST'
    or   ls_fcat-fieldname eq 'KEY'
    or   ls_fcat-fieldname eq 'LOWERCASE'
    or   ls_fcat-fieldname eq 'LZERO'
    or   ls_fcat-fieldname eq 'NO_OUT'
    or   ls_fcat-fieldname eq 'NO_SIGN'
    or   ls_fcat-fieldname eq 'NO_SUM'
    or   ls_fcat-fieldname eq 'NO_ZERO'
    or   ls_fcat-fieldname eq 'OUTPUTLEN'
    or   ls_fcat-fieldname eq 'QFIELDNAME'
    or   ls_fcat-fieldname eq 'QUANTITY'
    or   ls_fcat-fieldname eq 'REF_FIELD'
    or   ls_fcat-fieldname eq 'REF_TABLE'
    or   ls_fcat-fieldname eq 'REPREP'
    or   ls_fcat-fieldname eq 'REPTEXT'
    or   ls_fcat-fieldname eq 'ROLLNAME'
    or   ls_fcat-fieldname eq 'ROUND'
    or   ls_fcat-fieldname eq 'ROUNDFIELD'
    or   ls_fcat-fieldname eq 'SCRTEXT_L'
    or   ls_fcat-fieldname eq 'SCRTEXT_M'
    or   ls_fcat-fieldname eq 'SCRTEXT_S'
    or   ls_fcat-fieldname eq 'SELDDICTXT'
    or   ls_fcat-fieldname eq 'SELTEXT'
    or   ls_fcat-fieldname eq 'SP_GROUP'
    or   ls_fcat-fieldname eq 'SYMBOL'
    or   ls_fcat-fieldname eq 'TECH'
    or   ls_fcat-fieldname eq 'TIPDDICTXT'
    or   ls_fcat-fieldname eq 'TOOLTIP'
    or   ls_fcat-fieldname eq 'TXT_FIELD' ).
      ls_fcat-tech = 'X'.
    endif.
    modify p_fieldcat from ls_fcat.
endloop.
endform.
form switch_visibility.
data: lt_fcatfcat type lvc_t_fcat,
        ls_fcat type lvc_s_fcat.
call method g_editable_alv->get_frontend_fieldcatalog
             importing ET_FIELDCATALOG = lt_fcatfcat.
if not g_all is initial.
     perform hide_fields changing lt_fcatfcat.
     g_all = SPACE.
else.
    loop at lt_fcatfcat into ls_fcat.
       if ls_fcat-tech eq 'X'.
           ls_fcat-tech = SPACE.
           ls_fcat-no_out = 'X'.
           modify lt_fcatfcat from ls_fcat.
       endif.
    endloop.
    g_all = 'X'.
endif.
call method g_editable_alv->set_frontend_fieldcatalog
            exporting it_fieldcatalog = lt_fcatfcat.
call method g_editable_alv->refresh_table_display.
endform.
Don't forget to rewaard if useful..

Af:SelectManyShuttle trailing list does not display initially any result

I use af:selectedManyShullte component as follows:
<af:selectManyShuttle value="#{backing_shuttle.selectedValues}"
leadingHeader="Available"
trailingHeader="Selected"
partialTriggers="funds" leadingDescShown="true"
trailingDescShown="true" valuePassThru="true">
<f:selectItems value="#{backing_shuttle.allItems}"
id="selectItems2"/>
</af:selectManyShuttle>
backing_shuttle is based on tutorial ShuttlePageBackingBeanBase managed bean class that uses functionality from ADFUtils class.
I've configured managed bean properties in faces-config.xml and running jspx file I can see that ="#{backing_shuttle.selectedValues}" are being filled with data. However when a page appears there is initailly no data under the trailingHeader (panel). #{backing_shuttle.allItems} is being filled and that is being shown correctly on a panel.
Any help would be appreciated

This is solved, only values that appears in leading list can be displayed in the trailing list. However I have now problem with selectOneListbox adf element.
The list is dynamically rendered from iterator and I assigned managed bean method to ValueChangedListener but this method is not being called when other value from the list is selected. So now the model is not being refreshed.
Thx

Reqd. T-code in which list of customers display with CIN Details

Dear All,
Is there any t-code in which the List of Customers with cin details Display?Like the MKVZ,
this is the t-code for List of Vendors Display.
Thanks,
Sumit.

Dear Sir,
I have found another t-code VCUST for customer detail but in this CIN DETAILS are not there.
so pls. suggest something...
Thanks,
Sumit.

List view item display time is taking too much

Hi,
I am working in a sharepoint2013 project. In our project , list view item display time is taking too much in IE8 sp2013 64 bit environment. Can anyone help me to resolve this issue?
Thanks,
Nabhendu

Hi Nabhendu,
We had something similar with our SP2013 and IE8 32-bit. It seems that IE8 was in Compatible mode which make it IE7, which is unsupported by SP2013 due to HTML5.
Issue : List view especially datasheet view which has been moved from ActiveX to HTML5 had very slow response on SP2013 and IE8 32-bit.
Resolution : Try Chrome and see if its CSS/Masterpage or SP2013 issues performance issue.
We deployed masterpage and css which was used in our SP2007 site with minor changes, but later we figured out that we need to make major changes in order to work with IE8 and SP2013.
Try Indexing Columns.
check how many look up columns are used.
Hopefully that may help you..
Thanks,
Parth
Thanks and Regards, Parth

Business Data List View ONLY Displays records - Cannot Edit them

Using SharePoint 2010, I created an External Content Type. Data is coming from SQL Server. I created a new Read operation on my External Content type. I added a few filters in this Read View.
I have created a web part page in which I placed a Business Data List Web Part. In Web Part properties I chose the VIEW in question. I can now filter my External List data and the Business Data List Web Part displays them. But I cannot edit these
records!!!
From the web Part properties window, I can ONLY choose Views that are created from READ operations. How do I allow users to edit data and save data in the original source (SQL Server).
Mayank

Below are the reference links on how to CRUD operations on external data using BCS
CRUD operations using BCS using SharePoint designer
http://zimmergren.net/technical/sp-2010-getting-started-with-business-connectivity-services-bcs-in-sharepoint-2010
CRUD operations using BCS using Visual studio
http://www.c-sharpcorner.com/uploadfile/anavijai/creating-external-content-type-with-crud-operations-using-business-data-connectivity-model-in-sharep/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How do I change the new iTunes play list total time display from 1.5 hours format to exact display of 1hr 31min 12sec.

In the new iTunes the play list total time displays in 1.5 hours format, how do I get it to clearly show 1hr 31min 12sec like before, I want the exact time so I can properly fit all the songs when I want to burn this playlist to a disc. You can no longer just click on it to change the display format. Nor can you right click, control click, or change it in options. If anyone knows I would very much appreciate your imput. Thank You.

Actually, that's the problem ... in iTunes *11* it has stopped working. I have the status bar displayed, and it is stuck on the 1.x hours format.
That is very, very strange !!
I can't get that to happen on mine. It worked in 11.0 and I updated today to 11.0.1 and it's OK.
I've tried making a new playlist, I've tried changing an old playlist, smart playlist ...... all OK ????

How to display word document as a HTML document in portal

Hi
I developed a portal application in that i am displaying word document using IFrames, from my application i am uploading word document and saving those document in KM
Requirement is that i need to provide an option to show this word document in html.
Thanks
Rudradev.

Hi Glenn Mendonca
I thing it is possible
Even in SDN search results page, we have option called "HTML version" link
to see the search document in HTML
see the below url
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fforums%2fsdn_forums%2fthread%7b74687265616449443d39313633%7d.jspa
i hope passing doucment as a query parameter to com.sap.km.cm.highlightedcontent?DocumentUri=
might solve this
pls give your inputs
Thanks

Display Word Document as read only in VI pannel

In a VI pannel I put an Active X container with the IE browser to display Word documents.
The document are displayed properly but I want not give the user the possibility to make changes while viewing.
Is there a solution to do so?
(The documents are read-only and can not be saved.)

Why use an IE container to display Word documents? You can place a word document directly in the ActiveX container. This seems a better choice.
If you wish to totally block user-input, you can place a transparent picture control over the display of the Word document.
Another alternative would be to convert the word document to a PDF and show this in an AcviteX container.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

Modifiers in Collection List Renderer to display word wrapping

Similar Messages

Maybe you are looking for