Modify a standard KM Report

Hello,
I've been trying to find the .par file for a specific report in order to change it according to some requirements. The report is "Propagation of Properties". I've been looking in the Support Desk but I can't find it. Does anyone know where it is exactly and what the filename is?
Thanks,
Luis

Hi,
As far I know you cannot modify the standard report. When I had similar requiremnt for TBP Report (KM Report), I was suggested to create a custom built KM Report which I did as per Thilo Brandt's article.
May be you contact Thilo Brandt or Laurs Reuter for the same
Satish

Similar Messages

How to modify Standard ALV Report

Hello All,
I have a standard report which displays the data in ALV Grid. This data can also be exported to Excel sheet. I have got an FBI assignment where I have to add some new fields besides the existing ones. Could you please provide me with some documents oe explain me in brief how to modify any standard ALV report.
Thanks in Advance.
Saras

Can't you just add the fields with the layout option in the tcode ?? with other words are all the fields selected in that particular layout the programm comes up with
if the fields can't be selected a quick sollution can be to make a query with SQ01
Message was edited by:
A. de Smidt

Modify the standard screen of a report

I've just created a report with some parameters and when i try to modify the standard screen of this report via se80 i've got a warning message that tells me that all changes in standard selection dynpro will be discarded.
Does that mean i can't modify this Dynpro?
Thanks

Hi jose,
Wat is ur problem can u explain me clearly. wat u r trying to modify?? Ru trying to change screen settings??
For dynpro check this link
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm
Regards,
Pavan<a href="http://http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm">http://http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm</a>

Modifying standard ALV report

Hi while modifying one of the standard alv reports,
I had to include one more field..
for that I have made changes to the feild cat and i_tab structure. but the final report is not displaying that additional column
Can any one help me...
The report is IW29

Hi Kalyan,
Though you have added a new column to the Field Catalog, it MIGHT not get displayed on the output. This is because, it would be in the hidden mode. Try this. Click on the Layout, add this new field and save the layout. You should be able to see your new column now.
But dont forget to do the same in Quality and Production systems.
Hope this clarifies your problem
Enjoy SAP.
Rajasekhar

Modifying the Standard Report template

Hi
I have a report with 10 columns and 2 of them are wb_id, pa_id. Depending on the search critiria either wb_id or pa_id will be null. I want to highlight the row with some color when I select any row and I am modifying the standard template and
column template condition is 'Use Based on PL/SQL Expression' and it is
NVL(#COL02#,0) = NVL(:GLOBAL_WB_ID,0). But when I run the report it is giving the error that encountered # wherea as expecting.......
Thans a lot.

Hi,
I have a report page uses the following block of pl/sql as its source.
This calls a function by passing page items and this functions returns sql query.
DECLARE
V_SQL VARCHAR2(4000);
BEGIN
V_SQL := WF_PCK02.search_wb_pa(
:P1000_WB_ID,:P1000_PA_ID,:P1000_RIVER_NO,:P1000_GENRE,:P1000_LOCATION,:P1000_WATER_DEPENDENT,:P1000_BASELINE,
:P1000_NBT_PRESSURE_TYPE_ID,:P1000_PURPOSE,:P1000_NBT_SIC_DESC,:P1000_ACTIVITY_DESC,:P1000_NBT_MORPH_ACTIVITY,
:P1000_SW_ASSET,:P1000_ORDER_BY,:P1000_R1);
RETURN V_SQL;
END;
Now if user is searching for water bodies the results look like this.
10317 - Allt Ceitlein SURFACE WATER River Y 2a 2b N N
10318 - Allt a Chaorainn SURFACE WATER River Y 2b 2b N N
10319 - River Coupall SURFACE WATER River Y 2b 2b Y N
10320 - Allt a Bhiorain SURFACE WATER River Y 2b 2b Y N
if the user is searching for PAS the results look like this.
- UKS7992310 Lochs Long and Goil SHELLFISH WATER - Y 1a 9z N N
- UKS79923100 Ulva SHELLFISH WATER - Y 1a 9z N N
- UKS79923101 Ura Firth SHELLFISH WATER - Y 1a 9z N N
- UKS79923102 Voe of Clousta SHELLFISH WATER - Y 1a 9z N N
- UKS79923103 Wadbister Voe SHELLFISH WATER - Y 1a 9z N N
- UKS79923104 Inner West Loch Tarbert SHELLFISH WATER - Y 1a 9z N N
I had written a java script to select the current row, and page refreshes when I click
any where on the row and displays the display item saying that
currently selected id is 10317
or
Currently selected id is UKS79923100
and also assigns the 10317 to GLOBAL_WB_ID or UKS79923100 to GLOBAL_PA_ID
Now my user want to change the color of the currently selected row.
For this I am trying to change the report template like this
Column Template 1
<td class="t15data"#ALIGNMENT# style="background:#d1e2f3">#COLUMN_VALUE#</td>
Column Template 1 Condition
NVL(#2#,0) = NVL(:GLOBAL_WB_ID,0);
BUT
it is giving the following error.
Encountered the symbol "<" when expecting one of the following: ( ) - + case mod new not null others table avg count current ........................
ERR-1025 Error processing PLSQL expression. :GLOBAL_WB_ID = NVL(10317,0);
Then I changed the condition to substitute the #2# in single quotes like this.
NVL('#2#',0) = NVL(:GLOBAL_WB_ID,0);
BUT it is giving this error
Encountered the symbol "10317" when expecting one of the following: ( ) - + case mod new not null others table avg count current ........................
ERR-1025 Error processing PLSQL expression. :GLOBAL_WB_ID = NVL('10317',0);
I am unable to understand where the error is coming from.
Please help me.
10317 is the first row of the result set.
Thanks a million in advance.

Who modified the standard report

Hi,
How can i find out who modified the standard report in my server,guide me for the same.
Thanku

SE38 -> Enter report -> Mark Attributes -> Display -> Last changed by.
Regards
Juan

Materials for modifying Oracle Standard Report

Hi,
I need to modify Oracle Standard Reports.
Is their any material or documentation how to do it...?
If some one could give me the link or documentation that would be really great full!
Thank you!
-Preetha.

hi
which type of modification u want explain me i will tel u soluation
Rizwan

Is there any standard SAP report to see all active,inactive, retiree employ

SAP experts
Is there any standard SAP report where I can look all the employees whose employment specific status is 0 (terminated), 1(employee with the company but inactive), 2(retiree), 3(active).
please help
regards
renu

Hi Experts,
I had a similar requirement and I used S_PH9_46000223 Report for my need as suggested.
I observed one thing.
"If I give Selection Date as "Today" then the entry date column is 00.00.0000"
Can anyone clarify my doubt? it is happening in same way for other similar standard reports as well.
Doubts
1) Why this is happening
2) Is it happening as it should? Whats the reason
3) is there any functional/technical way to correct or modify
Regards

Best to modify the PO communication Report

Hi ,
Could you please tell me, what is the best way to customize the PO Communication report in R12.
Either modify the standard Views or Modify thehook.
Regards
B.kishan

See if MOS Doc 1532387.1 can help
HTH
Srini

XML Publisher Report in EBS without Standard Oracle Report

Hi folks ,
i have some questions.
Can I create a XML Publisher Report for the EBS without a Standard Oracle Report in EBS.
So that I can build up the files with the Desktop Publisher, create Data Definition / Template with Upload / Create the executable und concurrent and than only start the new program in EBS ?
I have the situation that I can start my program with the template in the background but ít is searching for the report on the file system.
Thanks in advance for the feedback.
regards
Kay

Hi Ravi ,
can i do it only with the xml Publisher , because when i tried it in the past and get all the staff like Template / DD / CP up and running and started the CR i get an error from the system that he is missing a report directly in the file system... so he searched for the report himself on system like a standard 6i Report. But the template and the dd is stored in the db. So my question again, can I use the XML Puplisher without a Standard Report or can i use a dummy file only for checking and after that he use my template / dd.
regards
Kay

Any Standard Aging report for MM

Hello All,
I am looking a standard aging report for Materials on my storage location.
We are following batch.
Please help
Regards
Lal

Hi ,
I hope for your new requirement this might help you .
If you want to perform an analysis based on the key figure dead stock, proceed as follows:
From the Inventory Controlling menu, select Environment -> Document evaluations-> Dead stock.
1. The selection screen appears.
2. Specify the desired analysis criterion and selection parameters.
You can carry out the analysis for all plants, that is, for each material, data from all plants are grouped together or only for certain plants, that is, the analysis is created for every designated plant. Any period can be selected for the analysis. The system suggests 90 days as the period to analyze, the calculation starting from the current date.
The following functions can be used to process the material list.
Detailed Display
By using the function Detailed display, you can call up in a table or graph form detailed data for a material including the respective material document. You can analyze all material documents that are related to the evaluated stock of a material.
If you want to view detailed information for a certain material, proceed as follows:
Position the cursor on the desired material in the results list and select Edit ->Detailed display.
A dialog box appears in which you can choose either a graph or table display.
If you select the graphic, you can display the latest information on:
     Cumulative receipts/issues
     Warehouse issues
     Warehouse receipts
     Stock level
If you select the table, you can display the following information:
     Stock movements
     Cumulative stock movements
     Current stock level
From the stock movement table you can drill down as far as the material document level to see detailed information. To display stock movements on a particular day, position the cursor on the relevant line and select the Choose function. A popup window appears which displays all the movements on the selected day. The individual movements for a selected date are displayed in a dialog box.
To display the document for a particular movement, position the cursor on the relevant line and select the Choose function. A popup window appears which displays the document.
Similarly you can try for the slow moving also .please let me know wether you were able to find what you were looking for .
source: SAP
cheers
KP

Standard Aging report for FI

Hi,
Can anyone give me the Standard Aging report or tcodes for FI..Its very urgent..
Thanks

Hi,
Look at the Below link which will have a Custome Report
http://sap.ittoolbox.com/code/archives.asp?d=2424&a=s&i=10

Is there any Standard SAP Report?for displaying Billing block/Status-Order

Hi,
Am a ABAP Developer. I heard that there is SAP Query/ABAP Query/Standard SAP report for the below functionality/requirement. SO, pls. let me know if there is any SAP Query/ABAP Query/Standard SAP report?
"This report is suppose to display Credit and Debit memo documents which are blocked and yet has a status of APRV; the other display is for Return Documents which are blocked and yet has a status RCVD."
thanq

Hi,
Use t-code
V23 - Blocked sales document for billing
VA14L - Sales document blocked for delivery
VFX3 - For blocked billing documents.
Kapil
Edited by: Kapildev Farakte on Jan 8, 2010 4:15 AM

Apple ID issue - Cannot modify a standard question

I cannot order books/prints from iPhoto as I have been unable to set up my Apple ID account in iPhoto. I have tracked the problem down to the fact that I am unable to update my profile password question/answer. I have tried to do this via myinfo.apple.com and the apple store account settings, and I get the following error:
Cannot modify a standard question
Earlier this year, this message was accompanied by the error number -20148.
Has anyone else had this problem?
I have spent over 10 hours on the phone with Apple Care and they have been unable (unwilling) to help fix this problem (which seems to be that the Apple ID database is corrupt).
Also, has anyone else experienced being brushed off by Apple Care with a problem they were unable to solve?

If all else fails can you just create a new account? You may be thwarted by your email address however as that's usually part of the account info that Apple looks at for duplication. it's worth a try however. If you have a .Mac account you could create an alias email name and use it.
OT

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

Modify a standard KM Report

Similar Messages

Maybe you are looking for