Modify Calendar item gives "You don't have the permissions requied to send messages from this mailbox" .

Situation:
-Customer has taken over an existing company.
-New users where created in the domain.
-Mail accounts where created and the .pst's imported.
-Everything fine so far.
Problem:
When a user tries to edit a calendar item created in the past the message "You don't have the permission required to send messages from this mailbox" appears. After that the item is changed in the users calendar who edited the item but not in the
other users calendar who where also invited.
Everything works fine when a new calendar item is generated.
Cannot find anything on this.
Please help!!

Hi,
According to your description, I understand that you create a new mailbox for a user and imported Calendar items to this mailbox by using PST file.
If that is the case, the calendar items which are imported should be created by other user. It is just imported in this mailbox. Please check whether the original mailbox which these calendar items created on is still existed in Exchange server or not. Then
check the calendar items in the original mailbox.
Additionally, if the original user is still existed in your AD or exchange server, please assign Send As permission for the new user to this mailbox to have a try.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Similar Messages

Error: You don't have permission to send messages from this mailbox.

When I try to email from an email Mailbox in SharePoint I'm getting this error message.
Error: You don't have permission to send messages from this mailbox.
This error only occurs if I try to send from the Project email i.e.
[email protected]
I've never seen this error message before and previously never had this problem so I'm wondering if this is caused by a recent change.
Cheers,
Mark
Learning SharePoint

Hi Mark,
According to your description, my understanding is that you got a permission issue when you emailed
from a site mailbox.
From the From address
[email protected], whether you are using Office 365.
By default, email sent from the site mailbox has a From address of the individual who sends the email. To allow a user to use the site mailbox email address as the
From address, you can give the user Send As permission for the site mailbox email address.
The permission seems to be for Exchange level, not SharePoint. So, please grant Send As permission to the user.
More information, please refer to the links:
https://support.office.com/en-us/article/Prepare-for-using-site-mailboxes-in-Office-365-6381daa5-3d98-4629-972d-d19e1dc48c1b?ui=en-US&rs=en-US&ad=US#__toc346536395
http://www.lynced.com.au/2014/03/sharepoint-online-site-mailbox-send-as.html
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error in Powerpoint 2011: "You don't have the permissions necessary to perform the operation"

We have a user with a new iMac running 10.7.2 that is having some strange problems with Powerpoint 2012 and who knows how many other programs. The issue is whenever these programs try to write to the user's personal network folder, which we keep on a DFS share. The error message only pops up when the user tries to save over something that already has that file name on the share. So she is always able to make file.pptx, but any subsequent "save" commands result in this error message: "You don't have the permissions necessary to perform the operation." Then, all she can do is save the file as newfile.pptx.
This doesn't happen in Word or any other files in the office suite. I've tried this both when connecting to the DFS share, and when using SMB to connect directly to the folder on the server, with no change in results. I've not tried removing/reinstalling the Office suite, because it's only powerpoint. I believe it must be something to do with her account's permissions in Active Directory, but when she uses this domain account on a Windows computer, there are no problems at all, of course.
There's a mere 3 google hits on that bolded error message, leaving me with very little to go on. Has anyone run into this before?

Hey,
I have Mac users using Office 2011 saving to CIFS shares having the exact same problem.
Like heiseheisepointed pointed out only Power Point seems to be affected. Word, Excel etc seem to work fine.
I have checked and reapplied the permissions to the share and it is not that, I believe it is something faulty in PowerPoint itself.
I also tried saving the files as ppt rather than pptx but you still get a permissions based error message.
Just wondering is eitherJeff or hbonath have any sucess in getting a fix for this?
Cheers
Genits

I tried to access my website, but Firefox threw the error: 403 Forbidden, you don't have the permissions to view.

My website - Mousenstein.com - is under construction w/Dreamweaver + Flash.
I uploaded my files to my server.
I opened Firefox and entered the URL:
http://www.mousenstein.com
The error "403 Forbidden" appeared, and ...
You do not have the permissions to access.
I have tried to upload my site countless times, but never successfully - it is a huge headache. That said, I have never gotten the "403 Forbidden - no permissions" before.
All other failures threw the error "404, can not locate the URL "/" on this server.
Any help will be enormously appreciated.
P.S. : Are there permissions preferences on Firefox? I found one under Tools Menu, but it didn't seem to address my problem.
Thanks

I get the same thing with Firefox, IE8, Opera, and Safari. It isn't a Firefox only problem.
Are you new to that webhosting service? <br /> Have you ever uploaded web pages to that same web hosting service previously, pages that worked after an upload? <br /> Are those pages listed as ''' "public" ''' pages in your web hosts control panel?
My suggestion is to "download" your homepage and associated files & images from your PC, up to the server, using your web hosts control panel and see how that works.
Beyond that, I suspect that you might have missed an important setting in Dreanweaver for uploading to the web host's server. You might try asking about this issue at a Dreamweaver support forum.

Cannot move the items. You don't have appropriate permission to perform this operation.

Recently, I upgraded outlook from 2007 to 2010, but I got a problem that I cannot move any mails to personal folder and the error msg is "Cannot move the items. You don't have appropriate permission to perform this operation.".Even I create a new personal
folder in 2010 and try to move mails to it, I still get that error message.
Can anyone help me out please?
Thanks so much in advance.

I've experienced the same thing and was unable to find this key that Tony mentioned. After searching numerous sites, i found this instruction set below and tried it and it worked. Per my case, the key PstDisableGrow was set to 1 under ...\Software\Polices\...
instead. I disabled it and bam, it worked. Give this a try...
Your System Administrator has either enforced a group policy to prevent pst files growing in size or a registry key is present preventing the growth of pst files. One of the following
registry keys will be present based on your version of office (11.0 for Office 2003, 12.0 for Office 2007 and 14.0 for Office 2010). The example below is for Office 2010 (14.0):
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\PST - DWord Value: 'PstDisableGrow', Value: 1
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\PST - DWord Value: 'PstDisableGrow', Value: 1
Best of luck!

While trying to delete an event on calendars keep getting you don't have administrator rights

while trying to delete an event on calendars keep getting you don't have administrator rights. I am the administrator.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

You don't have the privileges to create or run workbooks

Hi Experts;
I am using Oracle DB 10.2 , Discoverer version 10.1.2.0, EUL 5.1.1, EUL library 10.1.2.48.18
I use Role based security in my applications i.e. I am granting privileges to the roles and then granting the roles to the users, but I am having a problem with one of the schema/EUL which I could not trace.
I have granted the bussiness area to the role "B_User", I have also granted the following Desktop and Plus Privileges to the role "B_User"
1) Create/Edit Query
2) Collect Query statistics
3) Item Drill
4) Drill out
5) Create Link
The required workbooks are shared to the roles, but when I log on to Discoverer plus and try to open the workbook it gives the following error "You don't have the privileges to create or run workbooks. Please contact your Discoverer manager". I could create the workbooks but can't run any of the workbooks( existing or newly created).
I followed the same method for granting Security and Privileges for other schemas/EUL and they are working fine.
Is there anything wrong with the EUL I created? I even tried granting security access to "Public" and granted the Desktop and Plus privileges to "Public" for the stated EUL but still have the same problem.
Any help would be highly appreciated.
Thanks
Jethoo

Hey Jethoo.
At first blush, what you've written looks fine to me (assuming all the correct grants, etc. work in other business areas in the EUL).
So, let me just go over it.
1. You granted security (not privs) on the business area to a role 'B_User'. That means that anyone going into Disco using that role will let them see the underlying data.
2. You've granted privs to the role 'B_User' to be able to play with Disco. That looks fine.
3. You've written workbooks that have been shared with the role 'B_User'. That means that the end user can run a workbook.
So what I'd look at are:
4. I assume you only have 1 EUL and if not, are pointing to the correct one (in Tools -> Options -> EUL.
5. Did you create the workbooks in Disco Plus or Disco Desktop?
6. Have you tried to run the same workbooks in Disco Desktop?
7. When you did all the Admin stuff, did you reconnect in Disco Plus / Desktop before going on?
8. Did you assign the role to the user - at the database level you're having problems with?
9. Was it Friday the 13th. when you did all this - okay, maybe that's not an issue, but reaching here.
Russ
Message was edited by:
russ_proudman

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

The operations can't be completed because you don't have the necessary permission

Randomly my MacBook running OS X Mountain Lion 10.7.4 would not let me copy files to my desktop or create a new folder on my desktop. When ever I try to do either it asks me to put my password in and then I get this error message:
"The operations can't be completed because you don't have the necessary permission"
I already 'Repaired Permissions' and 'Repaired Disk' multiple times in Safe Mode and also in Utility mode (not sure what to call it, the mode where you go when you are installing the OS).
Anyone have any advice?

Trying this:
http://blog.thewheatfield.org/2010/09/09/os-x-solving-the-operation-cannot-be-co mpleted-because-you-do-not-have-sufficient-privileges-for-some-of-the-items-prob lem/

The operation can't be completed because you don't have the necessary permission.

My wife and I share files on our home network all the time. the problem is when I create files on my Mac Pro or Macbook Pro (.doc, .tif, .jpg, .psd, .png, etc) and place them on her Mac Mini. she can not edit them. She gets the message: "The operation can’t be completed because you don’t have the necessary permission."
The only way I know how to fix the problem is to delete the file from her Mac, change the permissions on my Mac (via Get Info), and then re-copy the file back to her computer. The problem is there are hundreds of files, in different folders on her Mac, so using a batch command with Get Info (Cmd, Option I) is not an option.
First of all why are all the files I create "Read only" for "staff" and "everyone" in first place?
Is the problem with my computer or with hers?
Is there a way for her to overide the permissions so I dont have to spend days or weeks going through every file I have created on my Mac?
Here is a screeen shot of one file:
Here is a Screen shot of the Folder on her MacMini that I drop files into:

She needs to connect to the file server with your name and password. Then she'll have the same access you have. I assume that's what you want.

Is there a way to remove your sim card if you don't have the tool that came with your phone?

Is there a way to remove your sim card if you don't have the tool that came with your phone? I wanted to see if I could upload my old information to the iCloud, by putting the new sim card into the old phone, since I didn't before I updated my new phone.

Any metal clip will do. Insert the tip in the little hole next to the Sim Card and press FIRMLY. The SIM drawer will pop out.

I can't sync my iPod classic with iTunes 10 anymore. A notice comes "You don't have the adequate access rights to make modifications." What happend?

I can't sync my iPod classic with iTunes 10 anymore. A notice comes "You don't have the adequate access rights to make modifications." What happend?

bump

I can't open itunes on my HP laptop. I keep getting the error message " You don't have the proper permissions to open this file".

Hello-
I can't open itunes on my HP laptop that uses Windows 7. I keep getting the error message "you don't have the proper permissions to open this file". I removed all Apple downloads and reinstalled itunes 10.6.3 windows 64-bit numerous times, but I still get the same error message. Please help.

Just want to add that after hours of searching and following every different blog on this issue, iTunes/apple you have lost my vote. What a joke...!

Awesome Tip for editing a PDF when you don't have the fonts

Needed to do this yesterday and looked online and found out how to edit a PDF file in Illustrator when you don't have the fonts. This is a godsend and thought others might benefit from it if they don't know about it.
Problem: You get a PDF file from somebody and when you try to open it in Illustrator, the PDF is using fonts that you don't have so it substitutes the fonts and screws everything up.
Solution: Create a new Illustrator document the size of the PDF.
Place the PDF into the Illustrator document.
While the PDF is selected, go to Object menu / Flatten Transparency
In there, make sure"Convert All Test to Outlines" IS checked.
Click OK and there you go, everything is converted to outlines, including the fonts and you can do with it what you want.
Enjoy!

It's an excellent tip. This can also be done within Acrobat: Flatten transparency with Convert Type to Outlines toggled on, then Save As a new PDF, then Embed-Place the new PDF in Illustrator. It's a functionally identical process, although yours is superior because it requires fewer steps.
While Tom is right that you can't edit the text (because it isn't live), you certainly can, for example, include artwork from another party that would otherwise lose its typographic appearance.

You don't have the authorization to start the workflow

hi,
We are working on integration of ESS with EP.
From EP when we sent leave request, We are geting an error
"You don't have the authorization to start the workflow".
Can anyone help us on this?
Thank you very much in advance.
regards,
Uttam.

Hi Linc,
Thanks for replying so quickly.
I actually figured out what was wrong and I feel so foolish not for looking here first. But the folders themselves were not locked, it was each individual song that was. So all I did was open up the folder and the following sub-folders to reveal the songs. I then would right click on each song > get info > and then the locked button at the top would be highlighted in blue. All I had to do was click the button, and poof the song was unlocked and subsequently the entire folder was unlocked, then I could delete the whole thing. I had to do this about 150 times for each song hahaha but it all worked out.
Thanks again for your time

Modify Calendar item gives "You don't have the permissions requied to send messages from this mailbox" .

Similar Messages

Maybe you are looking for