Modify existing vpn traffic rule does not become active

Hi,
When I modify an existing traffic rule, the rule does not become active.
Instead I always need to do a stopvpn and startvpn.
Is this a known issue ?
We are running Bordermananager 3.8 servicepack 5 (running on Netware 6.5
servicepack 5)
regards,
Pieter

Is the scmserviceconfiguration java process running? (See JAVA -SHOW).
Do you have a replica on the server?
Have you tried clicking on the synchronize buttons in either iManager
or NRM?
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Similar Messages

Setup Project installs but does not become active

Hello all,
My task for my work was to transfer over a macro that I made that would process and delete incoming emails to a specified mailbox in Outlook into a Visual Studio project. This is required because we want to be able to give out the code to clients, which
is quite cumbersome with a macro. I want to be able to use Visual Studio's Setup and Deployment to create an installer for the Add In.
I have spent hours trying to figure out how to get the installer to work. From everything that I have read and all of the youtube videos that I've watched, I just cannot for the life of me figure out what I'm missing.
My problem is that when I build the setup project and move it over to a machine I want to install it on, it installs just fine. I even check the windows event logs and it displays no errors, stating the installation was successful. The files are even placed
where I wanted them to be. But when I open Outlook expecting the add in to run, it's not there. Not under active, disabled, or otherwise. When I debug the project, it runs just fine and Outlook has the add in as active. Thus, I even tried moving over the literal
vsto file with the installer (because that was the file location shown in Outlook during debug), and still the installer runs successfully but it doesn't affect Outlook. When I double click the vsto file though, poof, Outlook has the add in. But that doesn't
appear to be the setup doing anything, I'm just installing the add in from the VSTO directly, I believe.
Apparently I cannot add images to the body text, which might have made this easier.
I'm creating my project (Outlook add in) and copying my macro code over. When I debug the project, it's shown as an active add in and works fine. I then add the setup and deployment project (Visual Studio Installer -> Setup Project). From the videos that
I've watched, I haven't noticed anyone do anything more than add the Primary Output and then alter the Deployment Project Properties (company name and etc.).
As I said previously, running the debug does just fine at causing the add in to be active and seen by Outlook, but no such similar thing appears when I run the setup installer on the other machine. Nor when I run the installer on the same machine as I was
running the debug.
I'm at a complete loss as to what I need to do to fix this and would appreciate any help you can give me.

Hi Brady Schwandt,
>>I want to be able to use Visual Studio's Setup and Deployment to create an installer for the Add In.
Which VS version did you use? So you use the InstallShield LE, am I right?
I found some blogs which shared some information about it here:
http://blogs.msdn.com/b/emeamsgdev/archive/2013/11/21/outlook-deploying-an-outlook-2013-add-in-using-installshield-le.aspx
http://blogs.msdn.com/b/mcsuksoldev/archive/2010/10/01/building-and-deploying-an-outlook-2010-add-in-part-1-of-2.aspx
http://blogs.msdn.com/b/mcsuksoldev/archive/2010/10/01/building-and-deploying-an-outlook-2010-add-in-part-2-of-2.aspx
As you said that the project has no any issue, so the real issue is related to "how to create the setup project with InstallShield LE for outlook add-in".
You know that actually we didn't support the InstallShield LE, it has his own third party supported site now, if above blogs no help, I suggest you post this issue to this site:
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Firefox does not become active from the Dock when I click on a email link

In OS 10.5, I can temporarily put the Firefox window off to the Dock by clicking on the yellow button in the upper left of the Firefox menu bar. In earlier versions of Firefox, the window would become active again if I clicked on a web link in an email address or document. Firefox 3.6.3 will open a tab for the web link, but stays inactive on the Dock. Why the change?
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.3, I think

Thank you, thank you thank you. This has been driving me crazy forever. I have looked for answers online but never knew to write or that anyone would answer my post so never tried. Whoever you are may lots of good things happen for you because your good deed. Know good karma is coming your way. Just changed the firefox default setting in mailto in applications to my regular email. saves tons of time and much swearing.

Settlement rule does not exists in order number.

Hi All,
I have been recieving a error while trying to save the Production order. The error reads as "Settlement rule does not exixts in order". But fact is that order has settlement rule. Also there is a default setting done in order type settlement profile because of which settlement rule is created automatically.
Now there is a way around. We calculate cost manually and then we go to settlement rule and check for error. Once we do so the order is good to save.
But we are not able to save it automaticaaly after release. This issue occurs when we try to release the order and then after releasing the order we try to save it.
Please help us on this issue.

Hi Prabhakar,
Thanks for your input. But the said setting was already done while implementation. All the material except this material has the issue. We are able to realease the order properly for the material except this one. And since go live we are using this material for first time.
We did a work around. We copied this material and recreated a new material with reviced part number. That one is working fine in lower client. We have now no idea how could one material all the same data like material master and routing and BOM and work centers can work properly whicle failing for other.
We are trying to debug this will let you all know if we find the solution. Till then if you all have any idea any prior experience, please let me know.

[svn:fx-4.0.0] 13615: fix airframework/build. xml so the en_US _rb does not become corrupt when the other. locales target is run.

Revision: 13615
Revision: 13615
Author:   [email protected]
Date:     2010-01-18 20:59:14 -0800 (Mon, 18 Jan 2010)
Log Message:
fix airframework/build.xml so the en_US _rb does not become corrupt when the other.locales target is run.
-removed the redundant en_US call in the other.locales target
-added a clean for locales that will only remove the locale being built before rebuild - not all of the locales
-add updated dita that does not contain spark references
QE notes:
Doc notes:
Bugs: no but Pete and I discussed briefly
Reviewer:
Tests run: doc and other.locales
Is noteworthy for integration:
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/build.xml
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/de_DE/docs/packages.dita
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/fr_FR/docs/packages.dita
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/ru_RU/docs/packages.dita
    flex/sdk/branches/4.0.0/frameworks/projects/airframework/bundles/zh_CN/docs/packages.dita

What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
Please send the .log to [email protected]

While deploying to another server from RM client using build definition i got below error "Package location does not exist or deployer user does not have access"

We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"

Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn:

If I copy and paste a web address, it does not become an underlined link..How to fix?

I sell items on ebay. When I copy and paste a web address it does not become an underlined CLICK ABLE LINK.
It does in automatically in Internet Explorer. I prefer using Firefox.
How can I fix this ???
Ron
PS The same thing happens if I try to email a link to someone.

Just above the textarea that you use to enter the message text on the "Compose New Mail page" there is usually a button bar with buttons to add text formatting like Bold and Italic.<br />
That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each (e.g. Insert hyperlink).<br />

Valdiation rule does not work on PrimaryBillToCity field

Hello to everyone,
Valdiation rule does not work on PrimaryBillToCity field (and other address fields)
Have someone a workaround ?
Thanks.
ML

I do not believe it is possible to do validation on the address fields in the address block.

Cannot retrieve table metadata - Table does not exist: ODP source 0WRKCNT_CATG_TEXT does not exist

Hi, when i able to import the 0WRKCNT_CATG_TEXT extractor into source system i am getting the above bug Cannot retrieve table metadata - Table does not exist: ODP source <0WRKCNT_CATG_TEXT> does not exist, i have been checked in RSA5 T code to check the object is active or not, its active and its available in ROOSATTR table with enabled mode,but still its showing the error, can anyone help on this ..

Hi Airings,
'ORA-00942: table or view does not exist'
According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
1. Verify that if the spelling of the table or view name is correct.
2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
explicitly reference the table or view by specifying the schema name (schema_name.table_name).
3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
read sys.mlog$. For more details, please review this similar thread:
Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
Reference:
ORA-00942 Table or View Does Not Exist Oracle Error
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

The last image in OneDrive navigation does not become ready

Hi,
When navigating original digital camera jpeg images the last image does not become ready as others i.e
the images before the last one user can see in two phases as it should be but the last one only in the first phase

Basic trouble shooting
How do you sync your Onedrive?
Are you having issue syncing your Onedrive to your computer or mobile devices?
What is the version or operating system of the device or computer you're syncing with Onedrive?
Are you getting any error message?What are the recent changes made prior to the issue?
Does issue occurs on all your Onedrive files or just on a specific file?
Can you edit your file via Onedrive web?
What are the exact steps you did on how you're trying to edit your files on 8.1 Onedrive? Is it via the Onedrive client or the modern Onedrive app?
Is your PC connected properly to internet and not on a metered network?
Could you confirm if the Onedrive Sync Engine continues to run and doesn’t continue to crash? To check, Go to Task Manager, ensure "Sky Drive Sync Engine Host" process is running.
On your Onedrive app, are there errors at the top of the screen or top right corner? (Top right corner error is a link that opens the “Progress” view page. )
Are there any icons on your Onedrive client on file Explorer that indicate errors (i.e., yellow triage, red x). If there’s an error icon, look for the error at the bottom of the file explorer window or right click on the Onedrive and select
“View error” and opens the modern Onedrive app “Progress” view page
If the above doesn't help then
Restart your system
Confirm that your computer is able to access the internet and is not on a metered network.
Confirm that the Onedrive Sync Engine continues to run and doesn’t continue to crash. Go to Task Manager, ensure "Sky Drive Sync Engine Host" process is running.
When viewing through Onedrive app: Launch the Onedrive app and look for errors at the top of the screen or top right corner. Top right corner error is a link that
opens the "Progress" view page.
When viewing through the Onedrive Desktop (File explorer view): Click on the Onedrive node and look for any icons that indicate errors (i.e., yellow triage, red x). If there’s
an error icon, look for the error at the bottom of the file explorer window, or right click on the Onedrive, and then select View error which opens the
modern Onedrive app "Progress" view page.
Verify if the files being uploaded do not exceed the 2GB file limit in Onedrive client (Windows Explorer).
The file has a name that is not supported. Rename the file to a valid name.
Finally you can run the Onedrive troubleshooter.
Wanikiya and Dyami--Team Zigzag

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

Membership rules does not work with UDF column name having the max length

Found a bug in OIM .
Membership rules does not work with UDF column name having the maximum length
Steps to Reproduce
1.Create a UDF having max column name length for eg UDF_USR_PERSONAL_SUB_DOMAIN_CO (lable = Personal Code)
2. Create a simple Rule like Personal Code = 7000
3. Assign this Rule as a member ship rule of a Group.
4. Create a user with Personal Code = 7000.
5. User doesnot get the group membership.
Thanks
Suren

Yes , i verified logs as well .
If you just decrease the column name length , w/o making change to any other attributes , it starts working ..
Thanks
Suren

ORA-20001 This person either does not exist at all or does not exist as of

Dear Gurus,
Im getting this error while submitting the personal information (while updating & submitting). I am using custom security profile at Security leavel. If i remove that security profile it works fine.
Can anybody give me a solution for this error.
ORA-20001 This person either does not exist at all or does not exist as of the effective date.
Regards,
Jithin

Where you able to resolve this issue, if so do you recall what the issue was? I have run SLM but this did not resolve our issue.

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

Freehand MX does not retain activation.

I had to reinstall Freehand MX on my new laptop. I have the new activation code from Adobe, it opens but does not retain activation. I must enter serial number every time. How can I fix this?

Hi SeaJaye,
What OS and version of FreeHand MX?
Thanks,
Sumit Singh

Modify existing vpn traffic rule does not become active

Similar Messages

Maybe you are looking for