Modify field selection for field "Reservation/Purc.req"  RESBD-AUDISP

I have alredy modify field in network using OPUA (field selection network header) and set the field "Reservation/Purc.req" CAUFVD-AUDISP make it to only display. But I need to set also the field "Reservation/Purc.req"  RESBD-AUDISP to make it display. How can I do that?

Hi,
Business functionality is switched off.
Check this link:
<link removed by moderator>
and search OPS_PS_CI_1 under ENTERPRISE_BUSINESS_FUNCTIONS in SFW5 TCODE and check whether it is switched on or off.
Regards,
Harsh.
Edited by: Virendra Pal on Oct 19, 2010 2:03 PM

Similar Messages

  • OPUK - Define Field Selection for WBS - diff bet. Modified and Influence

    Hi All,
    Kindly advise what is the difference between influencing and modifield field's for 'Project Systems > Structures > Operative Structures > Work Breakdown Structures (WBS) > Define Field Selection for Work Breakdown Structures (OPUK),
    Thanks!
    Regards,
    Vivian

    modified field is the field on which the impact is registered i.e hide, mandatoru etc
    Influence is the field that is the reason why the modified field needs to be changed
    for example if you have two project profiles
    then for one project profiel you can have say the resp cost centre mandatory and for the other you can have the resp cost centre hidden
    In this example the project profile is the influencing field and resp cost centre is the modified field

  • Field selection for G/L account 893010 not set up

    Hi,
    when iam creating a purchase order with reference of purchase requisition it is showing error as field selection for G/L account 893010 not set up,
    Thanking you,
    sukumar.P

    Hello,
    The field status are set up in two places.
        - on G/L account ( Tcode: FS03 - display, Tcode: OB14 Maintain )
        - on account assignment category in purchasing (Tcode: OME9)
          Both settings must fit to each other. If not, you receive error message ME 045 says that G/L account cannot be used.
          'Earmarked fund' should never be 'Req. Entry in G/L account's field status group setting.
          Because the MIGO document will not store 'earmarked fund' therefore no earmarked fund in accounting document either.
    For further information and guidance, take assistance of FI consultant in your team.
    Thanks & Regards
    JP

  • Set Field Selection for Completion Confirmation

    I want to change the indicator of one field from "ready to input" to "required"..But i couldnt understand exactly the hierarchy under "Set Field Selection for Completion Confirmation"  tab in SPRO. there are 3 parts under that tab;
    1-PM: Confirmation - initial screen
    2-PM: Confirmation - list and detail
    3-PM: Confirmation - parameter
    and i also couldnt find the name of my field which is about "codes for causes"..
    Thanks...

    Russ,
      I don't think it could be accomplished through configuration or through Transaction variants.
    I think the simplest way to accomplish this would be by using one of the below user exits according to your needs.
    CONFPM02: Customer-specific entry checks 1
    CONFPM03: Customer-specific check by operation selection
    CONFPM04: Customer-specific entry checks 2
    The other option would be to use the Implicit enhancement functionality(If you are in EC C6.0 or above)  to modify the table control field attributes dynamically.
    Regards
    Narasimhan

  • Field Selection for Networks

    Hi Experts
    I am working on the field selection for Networks. In TCode CJ20N, Network Header Overview, the Resp. Cost Center field (on Assignment Tab) is avialable, however, the same is not showing up in the Field Selection for Networks (TCodes: OPUA, OPUB and OPUC). Similar is the case with Plan Cost Calculation drop downlist (on Control Tab).
    How can we define the field selection for these fields?
    Regards
    Shoaib

    AP Thanks for the reply.
    As you mentioned, the Resp. Cost Center (PRPS-FKSTL) and Req. Cost Center (PRPS-AKSTL) are available in the WBS on Basic Data Tab Page. However, the Resp. Cost Center (CAUFVD-KOSTV) field is also available on the Network Header Level on Assignments Tab and the dropdown list Plan Cost Calc (CNDOK-NW_PLANCOST) is also showing up in the Network Header, Control Tab Page.
    The fields Resp. Cost Center (CAUFVD-KOSTV) and Plan Cost Calc (CNDOK-NW_PLANCOST) are not available in the field selection for Networks as mentioned earlier. The Resp. Cost Center and Req. Cost Center on WBS are available on the WBS Field Selection.
    How do we control the field selection for the  Resp. Cost Center (CAUFVD-KOSTV) and Plan Cost Calc (CNDOK-NW_PLANCOST)  on Network Header Level.
    Regards
    Shoaib

  • Define Field Selection for Move-In Contract Data

    In Move-In customization, in IMG activity u201CDefine Field Selection for Move-In Contract Datau201D when you go for u201CField Selection u2013 Modifiable Fieldsu201D Screen (Transaction is EQ07), I am seeing four buttons as follows.
    u2022     Modified
    u2022     Influencing
    u2022     Screen Groups
    u2022     Influences
    I would like to know the applications of that buttons.
    Also, if I click the u201CModifiedu201D button, it takes me to another screen in which I am seeing seven buttons as follows.
    u2022     New Values
    u2022     Delete Value
    u2022     Influencing
    u2022     Modifiable
    u2022     Screen Groups
    u2022     Influences
    u2022     View
    It would be really great if someone explain me about this.
    Thanks,
    Meenakshi Sharma

    hi meenakshi
      here are some data 4 u
    modified---if u  click that  u  will come to  know whther  any  field is modifies  or not previosuly
    influence--after u  make a modification the effect  or the change is shown  in  influences
    screen  gpr os nothing  but  all the main  and sub screens involved for a particular  transaction
    influencing field is something  like u   have some connection  witht that  field,for example click  screen  grp and screen  modification in  contract and  then  click infuencing u  can  see the  2 fields whch  are set  as influeincg  fields for contract
    u  can  change the selection  fro  i/p  to  diaply and save it  and see the changes or details showed  by  clicking  each  button..hope u  willl finds a lot urself
    kr
    raj

  • Field Selection for Inbound Deliveries?

    Hi SAP Gurus!
    Good day! During Creation and changing of Inbound Deliveries (VL31N or VL32N), how can I change the field for Movement Type into Optional? I can't find any Field Selection for Inbound Deliveries in IMG. How will I do this? Please help.
    Thank you.
    Mik

    i believe u need to modify the delivery item category for the inbound delivery as system fetches the movement type from there and if u do not want to make use of the movement type then it means there is no requirement of good reciept
    so make use of some delivery item categoy  in which putway is not relevant

  • Including customized fields in Field selection for Project definition

    Hi Experts,
    I have created additional zfields in Project definition,
    But those fields are not coming in customization node " Field selection for Project Definition".
    Is there any way , by which we can include those fields in the list of " Field selection for Project Definition"  in customization ,
    so that i can hide/disable for diff project Profile.
    Thanx in adv.
    Regards
    Ashis

    Hi,
    actually one can try to add customer fields to field configuration using transaction SFAW alike SAP own fields.
    It is usually possible to extend the list of the modifiable fields of the  field selection in transaction SFAW within the framework of a            
    modification (as long as the fields are relative to tables PRPS or  PROJ). The relevant module pool is SAPLCJWB.                             
    Example
    E.g. for the SAP field 'functional area' (field  PRPS-FUNC_AREA) one would proceed as follows:                                                                               
    In the transaction SFAW, Module pool SAPLCJWB, Screen group PRPS 
    -Select 'Modified fields', and choose 'Change'.                          
    -Enhance the list of the modifiable fields by the following entries :    
    PRPS-FUNC_AREA. Answer yes to the question : do you want the field to   
    be modifiable?.                                                         
    Don't forget to save and then click on the 'generate button' of the     
    transaction SFAW.                                                       
    - The relevant field for distribution profile would be PRPS-PGPRF.         
    In the same manner one can try to add the Z field.
    Please note: This procedure is considered as a modification, so please review note    
    114390 which discusses a problem which can occur during an upgrade.      
    Kind regards
    Peter

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT

    Hi,
           I am trying to do the Post Goods Issue (PGI).
    But, the system is throwing an error as mentioned below.
    Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
    I made the Cost Center as Required Entry. But, there was no effect on the PGI.
    I could not make out the exact error.
    Please guide me properly in this regard and do the needful.
    Thanks in advance.
    Thanks & Regards,
    Srinivasa M.S
    +91-9910077829

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Field Selection for Open Item Clearing

    In Field Selection for open item clearing (t-code : O7F1),
    can I maintain non standard field such as "XREF3" (Reference KEY 3) ?
    I tried to insert "KIDNO" into O7F1 and system allowed it.
    But when I checked in F-51, the XREF3 (Reference KEY 3) was not in the field selection.
    Have anyone get the same issue?
    Thanks.

    Hi Sneha,
    Check the following config path for relevant settings-
    Financial Accounting (New) > Accounts Receivable and Accounts Payable  > Business Transactions  > Open Item Clearing > Make Settings for Processing Open Items > Choose Selection Fields
    Select customer , vendor etc as per requirement.
    Regards

  • Use of Field selection for Multilevel list Display Equipment/Function loc

    Dear Expert,
                          Anybody suggest me that how can we use the feature of Equipment & function location settings as given SPRO path.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Equipment ® Define Field Selection for Multi-Level List Displays of Equipment.
    Plant Maintenance and Customer Service ® Master Data in Plant Maintenance and Customer Service ® Technical Objects ® Functional Locations ® Field Selection for Multi-Level List Displays of Functional Locations.
    Your help & suggestions are much appreciated.
    Regards,
    Akhilesh

    Dear AKhliesh,
    This customizing setting is for the T-code IE07. You can customize view of IE07 in different strcuture with required fields wants to didplay or suppress.
    Regards,
    Kaushal Rai

  • Field Selection for Maintenance Planing

    Hi Dear,
               I have done some field selection somewhere in SAP System.Now when I am creating Maintenance Item,Maintenance Plan,now I am getting Function Location field as Required.
    I don't remember where is the field selection for making the field Function location mandatory.
    Please suggest.I am also looking into it.
    Thanks and Regards,
    VJ

    Hi Narasimhan,
                           I got the field where the changes need to be done.In Notification reference screen I had set the Function Location as a mandatory field.
    Problem solved by me it self.
    Thanks for your Effort.
    Thanks and regards,
    VJ

  • Field Selection for - Invoice Verification (MIRO)

    Dear Experts,
    Can anybody please explain how make Field selection for INVOICE VERIFICATION (MIRO).
    I want BUSINESS AREA field mandatory in MIRO.
    Thanks in Advance

    Hi,
    Business area is linked to other organizational units (plant, division,
    distribution chanel, cost center). It can be defined using assigments
    (e. cost centers to the business area) or combinations of information
    (like plant and division determination).
    It is usually derived from the account assignments of the cost items
    and inherited from there into the vendor line item.
    For MIRO,to automatically fill the business area it must be able to
    uniquely identify a business area.
    This means that for multiple materials each one must have the same
    business area for IV to fill the vendor line item.
    This is the way the system is designed.
    The business area can be set as 'optional' field and is not 'mandatory'
    by design.It can be customised according to the individual needs.
    Please check the field status in tr OB41/OB14 and  OB23 for the vendor.
    Best Regards,
    Arminda Jack

  • IE07 and error 'Maintain field selection for Fleet data in Equipment List'

    Hi all,
    When running transaction IE07 (multi-level equipment list) , I get the following error:  'Maintain field selection for Fleet data in Equipment List (Multilevel)'
    I can't see where is the missing configuration point.
    We have activated business function LOG_EAM_CI_3.
    Have anyone encountered this error before?
    Thanks,
    P.

    Hi Narasimhan
    Could you give more details ? where is located this setting?
    Thanks,
    P.

Maybe you are looking for

  • Apps won't download onto my phone :(

    Each time I try to download or update my apps my phone tells me I am entering the wrong password or username which I know is false because I am using it to log on now and post this. After attempting to enter the password enough times it tells me it c

  • I'm trying to understand SYNC. How do I know if my addons I add to one computer or another are sync'd and not deleted when syncing occurs.

    Maybe the question has been answered, but I havent seen an answer in a way I understood. I have two or three computers I regularly use. I've been with Firefox for years - probably since version 3. Over time I've downloaded old standby add-ons like th

  • INTERNET stopped working

    Hi, I've tried all the fixes I can find for this and nothing has worked. Safari, Firefox and Software Update have all stopped functioning, anything involving the internet won't load up. But when I check the network connection it says it's working pro

  • Shortcut only in some cases

    hi! I have 2 buttons (btnDelete and btnClear), which are activated when an item of a listview is selected. Each button has a quick access. <Window.InputBindings> <KeyBinding Command="{Binding DeleteCommand}" Modifiers="Control" Key="D"/> <KeyBinding

  • Adding Instances

    How can i create a new instance of a class (in this case 'Money') and add it to another instance of the same class? Also, the result of this addition needs to be another instance of the same class. How can i do this? The constructor for the Money cla