Modify Map files

I am trying to convert a file from MSWord to XML with Epic, but I have no idea how to modify the map file.
Any response would be appreciated.
Thanks in advance.

Looks like there's a more appropriate forum here:
http://www.arbortext.com/html/subscribe_to_adepters.html

Similar Messages

How to add a new mapping file

I am using SSIS (SQL Server 2008) to replicate from an ODBC source (using .NET Framework Data Provider for ODBC) to SQL Server.
I am using the Import/Export Wizard and encountering the problem described in KB 152728:
SSIS 2008 Import Export Wizard can show numbers instead of data type
http://support.microsoft.com/kb/2152728
I am trying to add a new mapping file in C:\Program Files\Microsoft SQL Server\100\DTS\MappingFiles, but it appears that the new mapping file is not being noticed by the wizard - the dialog box of the wizard (COnvert Types without Conversion Checking) still
displays
Source Information:
Cannot locate the mapping file to map the provider types to SSIS types
I tried creating a new mapping file by copying an existing one (DB2ToMSSql10.XML), renaming it ODBCToMSSql10.XML (as near as I can tell, the filename doesn't matter), and changing the SourceType line:
SourceType="System.Data.Odbc.OdbcConnection"
Is there anything else I need to do? I was expecting I might find a file that SSIS uses to figure out which mapping file to use, but I was unsuccessful, so I think it looks at the SourceType line.
The following is the full output of the dialog - perhaps I should be modifying DTS\binn\DtwTypeConversion.xml instead? But that seems messier than creating a new file in DTS\MappingFiles:
[Source Information]
Cannot locate the mapping file to map the provider types to SSIS types
[Destination Information]
Destination Location : (local)
Destination Provider : SQLNCLI10
Mapping file (to SSIS type): c:\Program Files\Microsoft SQL Server\100\DTS\MappingFiles\MSSQLToSSIS10.XML
[Conversion Table]
SSIS conversion file: c:\Program Files\Microsoft SQL Server\100\DTS\binn\DtwTypeConversion.xml

Hi, did you ever get a solution to this issue? I'm having a similar challenge trying to create a new mapping file which is not being detected by the import wizard.
Please let me know.
Gregg

Can´t create or modified PDF Files on CIFS shares

Does anyone know the solution for this:
My customer cannot modify PDF files on a CIFS NAS mapped partition, all permissions are configured as full control
Doc. files, xls files can be modified without problems in the same share, this happend only with PDF files.
Files on local drives are not affected.
pls your help
Product Information
Adobe Acrobat Pro extend 9.0
S.O Windows 7 WS PC
access trough : windows shares access
local access : no erros present
new PDF files also affected
other files extensions not affected
thansk
Hector Ortiz
EMC

I have PDF files that i downloaded a while ago, those are fine. When surfing - i down load and file never opens nor is there anything to save....

Automatic merging of map files in RoboHelp?

[Hope this isn't a double post; my first attempt ended in
network error and forum doesn't seem to have that post]
My group is charged with developing a help system using
RoboHelp 7. Output type will be WebHelp. The interface between
context-sensitive Help system and the target application will be a
single project's output and a single map file. The plan for help
development is to divide the work up into multiple layers of
projects. The final output will be the result of multiple project
merges from the bottom layer up.
RH7 enables this methodology with the WebHelp merge
module...except that it doesn't automatically merge sub projects'
map ID files (individual BSSCDefaults.h) into the master project's
map ID file BSSCDefaults.h. I can use a different name for the sub
projects' map files and import them into the master project, but
this still does not result in the master's map file being modified.
The map IDs remain dispersed across the multiple map files within
the master project.
Is there a way to get an automatic concatenation of map ID
files?

Thanks for the suggestion. I was hoping that the answer would
be other than that it's a manual procedure outside of RH7, but
that's the conclusion given my previous [admittedly brief]
searching within this site and thinking more about the RH paradigm
(as explained in the Grainge article as well as the other Adobe
articles).
For now, I'm going to have the team use the following process
while we're shaking out our development methodology:
- each author follows the established naming convention for
Topic IDs and use his/her assigned map number range when creating
map IDs which should guarantee that the IDs are unique across all
projects
- each author will export his/her projects' map file (for
java applications) to a subfolder within their project
- rename the resultant BSSCDefaults.properties file to a
globally unique filename
- copy that project-unique properties file to the specified
folder
- one person/admin will concatenate the individual properties
files into a single file to be used by the application developers
Comments?
ayf

Need help in modifying mapping parameters of out the box mapping

Hi There,
I am a new bee to dac.
Need help in modifying mapping parameters of out the box mapping, which is invoked by DAC task.
We got a requirement to edit mapping parameter. When I go and see parameter under mappings tab in a mapping, I could not see any values in it.
But when I set any value, and validate it. It is successful.
Is it right way to do it?
What my concern is, When I initially go and see parameter values under maapings tab in a mapping, they are blank.
Where is it storing these values?
Thanks,
Rag

If you modify mapping then u have to create new task in dac and dac itself craete parameter file at run time. if you want to add more parameters then do it in dac system parameters tab.
Thanks
Jay.

How to upgrade mapping files of TOPLink 2.5.1 to the latest?

We are planning to update our TOPLink 2.5.1 to the latest,but we don't know whether Oracle has some tools or new features in TOPLink 9.0.3 that directly migrate the mapping files of TOPLink 2.5.1 to the TOPLink 9.0.3?
Thanks very much!

Hi, Mr Smith
I have same problem as Mr. Tai .
I want to contact you with email, but the mail box [email protected] or [email protected] are invalid with my outlook report.
So below is my email contents, and my mail address is [email protected] .
Mr Smith:
I met some confusions in upgrading our system from TOPLINK2.5.1 to TOPLINK Release 2(Oracle9.0.3).
And because I didn't use TOPLINK tools before this project, I spent one week to know the structure of our system. Unfortunately, Our company isn't a supported Oracle customer. We just bought Oracle product, didn't buy support service.
First of all, I'll describ our system structure. The system is Weblogic5.1 + Toplink 2.5.1 + Oracle8.1 .Using Toplink we mapping our EJB to Oracle. The results of this procedure aremany .table, .descriptor, .topclass under the mapping forlder, and weblogic-ejb-jar.xml, topling-cmp-XX.xml, ejb-jar.xml under the deploy forlder. That's all.
So, after our ant-build, we copy these results to Weblogic server directory, and compile with EJB, deploy them. It's correct?
OK, as my considering, I install TOPLINK Release 2 , use Renamer tool to rename my source code from old TOPLINK library to oracle.toplink, complie them again. And create new project in TOPLINK 9.0.3 , import classes, login Database correctly. Do mapping as in TOPLINK2.5.1. Generate packagename.ClassDescriptor.xml under Descriptor, forlder ClassRepository, Class, Table, Database generate xml files also.
Do the above process correct? OK, let's assume it' correct. But how can I modify my ant-build , you know the structure is difference between Weblogic 5.1 and Weblogic 6 or 7. Additionally, I don't know where should I copy new TOPLINK library to Weblogic directory. Yes, I know old TOPLINK library location, but I think it has difference.
So , please tell me I can use Weblogic5.1 + TOPLINK 9.0.3 + Oracle 8.1 , is it right? I will be appreciated if you can give me some detail steps in upgrading TOPLINK.
And perhaps we need to upgrade out system from TOPLINK 2.5.1 to TOPLINK 4.x first?
Thanks for your view.
Yours
Denver Yang
Software Engineer
E-MA Logistics Systems (Shanghai) Limited
Tel: 86-21-6361-1177 Ext.140

How can i using datasource in toplink's map file

In the TopLink map :
<toplink:login xsi:type="toplink:database-login">
<toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</toplink:platform-class>
<toplink:user-name>test</toplink:user-name> <toplink:password>C23487CFA591952D44310804F3D591CB</toplink:password>
<toplink:sequencing>
<toplink:default-sequence xsi:type="toplink:native-sequence">
<toplink:preallocation-size>1</toplink:preallocation-size>
</toplink:default-sequence>
</toplink:sequencing>
<toplink:driver-class>oracle.jdbc.driver.OracleDriver</toplink:driver-class>
<toplink:connection-url>jdbc:oracle:thin:@192.168.0.1:1521:testdb</toplink:connection-url>
<toplink:bind-all-parameters>true</toplink:bind-all-parameters>
</toplink:login>
How can i modify it using datasource?

The login information stored in the map file is good for direct connection and design time login information.
For your runtime login information I would use the sessions configuration (sessions.xml). It provides complete deployment configuration:
   <session>
      <name>my-session</name>
      
      <project-xml>META-INF/employee-basic.xml</project-xml>
      <session-type>
         <server-session/>
      </session-type>
      <login>
         <datasource>jdbc/TopLinkDS</datasource>
         <uses-external-connection-pool>true</uses-external-connection-pool>
         <uses-external-transaction-controller>true</uses-external-transaction-controller>
      </login>
      <external-transaction-controller-class>oracle.toplink.essentials.transaction.oc4j.Oc4jTransactionController</external-transaction-controller-class>
      <enable-logging>true</enable-logging>
      <logging-options>
         <log-exceptions>true</log-exceptions>
         <print-thread>false</print-thread>
         <print-date>false</print-date>
      </logging-options>
   </session>Doug

REP-52005: The specified key rep_drill does not exist in the key map file.

Hi
I am using Forms and reports version 11.1.1.4.0
Weblogic 10.3
I wanted to create a drilldown report
I have modified the cgicmd.dat file in the below location
C:\ORACLE\Middleware\user_projects\domains\CL2DOMAIN\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
by adding the below line to the end
rep_drill: userid=JOE/JOE123@JOEDB server=rep_wls_reports_dsv-002_2inst desformat=pdf destype=cache paramform=no %*
restarted the reports server
In CUSTOMERS.RDF I have placed a link on the customer field using the below code
SRW.SET_HYPERLINK_ATTRS('TARGET="_new"');
SRW.SET_HYPERLINK('http://192.168.1.1:9002/reports/rwservlet?rep_drill+report='||'CUSTOMERS.rep+P_CUCODE='||CHR(39)||:CS_CUSTOMER||CHR(39));
There are so many parameters passing to the report JOBS.RDF
When I run the report and click on the link it gives me an error
"REP-52005: The specified key rep_drill does not exist in the key map file."
When I replace the rep_drill in the link with
userid=JOE/JOE123@JOEDB+server=rep_wls_reports_dsv-002_2inst+desformat=pdf+destype=cache+paramform=no
the report work perfect
Can somebody help me please

I said
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=
It looks like you did the following:
REPORTS_URL value:
http://appserver4.rockefeller.edu:7777/reports/rwservlet?report=test.rdf
Try removing the test.rdf.
Anton
p.s. If you want some detailed help with integrating Apex and Reports, you can contact me offline here: http://concept2completion.net/c2/f?p=9876:20

BEx Map - File without SAPBWKEY

Hi!
I want to display a map. Therefore I'm using shapefiles, which are not delivered by ESRI.
They do not contain the SAPBWKEY, so there is no connection between the BW and the maps. However, there is a column called bw-key, which contains the information that I need for sapbwkey.
Does anybody know how to get a sapbwkey - column into the dbf-file or how to handle the problem otherwise?

Hi,
first option would be to maintain the SAPBWKEY directly in the dbf-file with an editor like excel (save as dbf-file), this means to add a column and maintain the values for reach row.This is a possible way as it is described in the SAP-documentation. You should make sure. that the column is named SAPBWKEY (not BW-KEY). For me this option did not work (probably due to some dbf-formating issues). After uploading the shapefiles to the info object, the data was not correctly assigned to the map-polygons.
What worked was another possible way, e.g. to maintain the SAPBWKEY in the Arcview software delivered by ESRI. Using the Arcmap -application.
-Rightclick on the respective layer, then 'Open Attribute Table'
-Press Button 'Options': Add field. Name = SAPBWKEY, 'Type' depending on your characteristic
-Next Step: Editor ( a menue you need to load into ArcMap) --Start Editing
-Then again: Rightclick on the respective layer, then 'Open Attribute Table'
-Now you can maintain values for the SAPBWKEY
-Editor: Stop Editing (save changes)
Rightclick on the respective layerData-Export data
The last step exports the modified shapes files, which can then imported to your info object.
Best Regards
Marcus

How to read map file ?

Hi,
   I have a linker map file having some data like below
   File name :Load.map
     2000b598   ABC
     20009672   bbb
My requirement is to read hex value when an input is given.
Inuts are "ABC" or "bbb" .
Example: when input "bbb" is given then 20009672 needs to be displayed in indicator.
please let me know the solution as this is very urgent.
Thanks in advance,
krishna
Solved!
Go to Solution.

Linker file generated by Multi.
Assuming my linker file having the following data
File name : Load_3.0.map
2000b598    Switch1
2000b590    Switch2
Now I want to read Switch2 address. When I read using match pattern I got the output as
2000b598    Switch1
2000b590
But I am expecting output as 2000b590.
Please find the attached vi and map file for your reference. I know I need to work around something but I'm snot sure what need to be done.
Please modify Load_3.0.txt to "Load_3.0.map" due to an attachment error.
Awaiting for your positive reply.
Regards,
krishna
Attachments:
Read From Mapfile.vi ‏6 KB
Load_3.0.txt ‏1 KB

REP-52005: The specified key userlogin does not exist in the key map file.

Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services                       ;
; CGICMD.DAT                                      ;
; Example CGICMD.DAT Mapping file                 ;
; Syntax:
;      KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
;    1. Parameter on command line to the reports servlet
;          e.g. http://machine/servlet/rwservlet?KEY
;    2. Parameter on command line to a reports jsp
;          e.g. http://machine/mydir/myreport.jsp?KEY
;    3. Within a reports jsp - in the rw:report custom tag
;          e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
;       construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
;   1. Multiple keys in this file MUST be separated by an EXTRA empty line.
;   2. Extra spaces are ignored. Multi-line entries allowed.
;   3. Lines starting with ";" character are treated as a comments.
;   4. Comments within a key or key value are NOT allowed.
;   5. NLS language support is provided and can be used (encoding should match the one
;      used in HTML request - no language conversion of any kind is attempted.
;   6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
;      The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb:         userid=oe
;parmformjsp:        userid=oe
;tutorial:           userid=oe
; Paper Reports
;xmldata:            userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper:       userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements:    userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priya

uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

How to Rename a Topic ID in Map File to Avoid Conflict with Another Program?

Robo 8 HTML:
Can somebody assist me in understanding how to rename a topic ID in my map.h file?
An application programmer informs me there are nine topic IDs (shown below) in my project map file which conflict with predefined names of constants/functions from the Visual Studio Libs program and, is requesting I change the names of the topics listed below to resolve topic ID conflict in order to enable F1 call for these topics.
#define Open    59
#define Save    60
#define Print   63
#define Cut     72
#define Copy    73
#define Paste   74
#define Clear   75
#define Status 81
#define Substructure 139
Can I simply alter the topic names and retain their associated map numbers in <Create/Edit Map ID> dialog to resolve the map file conflict with Visual Studio Libs program functions? Or, is there more work involved in changing a topic name in a map.h file?
Any assistance with this question is greatly appreciated.
Thanks,
robert

Hi,
Simply renaming the TopicID's in the .h file won't work. The TopicID is used in the alias file (projectname.ali) to link a map number with a topic. Also, you can use either TopicID's or map numbers to call the help. (Using TopicID's only works for WebHelp afaik.)
If you use map numbers to call the help, you can rename the TopicID using the mentioned dialog. No problem.
If you want to change the ID from the files, you have to change both the .h file as the .ali file. No changes to topics needed.

How can I instruct SqlMetal to exclude the 'storage' attribute of all the columns on a mapping file when converting a .dbml file to a mapping file?

Hi,
I'm trying to use LINQ to SQL with a top down approch using my own POCO classes. I'm using a XML file for the external mapping but in order to avoid typing a long file by hand I found that I could use the O/R designer to create the .dbml and from there I
could use SqlMetal.exe to generate the map file from the .dbml. The only thing is that, by default, SqlMetal generates a map file which includes the 'storage' attribute for all the columns of the database. For example:
<
Column
Name="Ticker"
Member="Ticker"
Storage="_Ticker"
DbType="NChar(20)
NOT NULL"
CanBeNull="false"
/>
However, in my code I only use automatic properties (Ticker, in this example) and not properties with the corresponding private field. Basically, I don't have any field "_Ticker" in my class. I found out that this the reason why I'm getting the error
"Bad Storage property: '_Ticker' on member 'TTS.Domain.Asset.Ticker" when trying to add an entity to the database. However, ff I delete the all the 'storage' attributes from my mapping file everything works fine.
Is there a way so I could use SqlMetal to generate a map file from a .dbml file but in which it never includes the 'storage' attribute?
Thanks.
Best,
Miguel T.
This is reason why I'm getting the error.

Hi Serguey,
I was expecting that answer but I still had some hope that it could be possible! I checked those 2 links before sending my question.
Currently, I'm deleting the storage attributes everytime that I generate a mapping file. The issue is that I will have to do this eveytime that I need to add data in my O/R designer which happens quite frequently since I'm working with iterations in my project.
It's not very practical but it's still better than write the additional data by hand.
I don't know how I could create my own mapping validation in order to exclude the 'storage' attributes everytime that I generate a mapping file from a .dbml file with SqlMetal but I will check that option too.
Thanks for your helps.
Best,
Miguel.

How can I change the time of photos in info in iPhoto for iOS. I've done it in iPhoto for Mac but when I sync to my ipad the info field goes back to the camera time ignoring "modify original files" in iPhoto for Mac?

I used "adjust date and time" and"modify original files" to correct the time of photos taken on a camera used in Peru which was set to UK rather than local time. which is 6 hours behind. This was to bring them into line with shots taken with other cameras set to local time. This was using iphoto 08 on a Mac. I then synced to my iPad. The photos stayed in the correct order in photos but in iphoto (iOS version) the original dates appear (the camera dates) and so the photos are out of chronological order again. This looks like a bug but is there a fix?

don't know what you mean by "write to master" but speculate that it means modify the original times, in which case the taken times on the camera should no longer be present
No,I meant your using the option "modify original files" will do exactly that - change the capture date original master files stored in the iPhoto library. Only when you do that, the "date modified" of your original files will be changed as well, and it will now be the date of your manipulation of the capture date.
Oh - I hadnt considered that possibility - but of that were the case, why don't my manipulated photos go to the end of the sequence as I have done all the manipulation after the end of the holiday??
In photos the synced album maintains the chronological order which I set up on the mac by modifying the originals, as you said,
That is what the linked article is describing: "some apps may sort your photos in the order you specify in the app (such as iPhoto or Aperture"
The problem I have is that, in the album, iphoto (ipad) sorts them differently to both iphoto (Mac) and the photos tab on the ipad
In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
"on ipad this is the Photos tab" - but this displays as per the original sequence ignoring time adjustments - the manipulations seem to be ignored (but are reflected in the album in the photos tab) and the photos tahat have been modified stay in their original positiom - they don't get put the end
Because the library uses a different date - the date modified - the date of the last time the file has been changed in any way - any editing you do to your image, including adjust date and time will change the "date modified"
This may change the sorting of the database but it appears not to influence the order in the albums
In addition to albums and events, synced photos appear in a unified category called Photo Library (on iPad, this is the Photos tab). Photos are not duplicated. This category will also sort photos in ascending order by the date modified.
So how can i get my photos in date and time order in an album in iphoto for ipad?
Thanks for your help

How can I generate a map file with LabVIEW?

We wish to use a product which inserts code into our executable to prevent tampering with it by crackers. The program, however, takes the executable file, as well as the map file (which is commonly generated by c++ compilers) and uses the map file to determine where in the exe the critical routines that need protection are at. I can not, however, determine how to create such a map file for a LabVIEW generated executable. Is there a special build option I need to invoke?

Yes, I'm familar with NI's licensing technology, having talked with someone (you, Dennis, I believe) about it before. The problem we have is our software is sold to factories in China where there are no internet connections. We have a physical key 'dongle' which must be present in order for the executable to be willing to run. However, it appears that people are taking the executable which LabVIEW creates and they are editing it, probably by using a a debugger and tracing to the the code which checks for the dongles presence and bypassing it. To my knoweledge, NI's products don't do anything to prevent this, right?
We found a company which sells a product that encryptes, checksums, etc... an executable file, but it needs to know the layout of functions in the exe in order to determine which areas to focus the obfuscation on. They were sort of matter of fact when they said it needs the exe and the map file, as if they expected any language which produced an exe could produce a map file.

Modify Map files

Similar Messages

Maybe you are looking for