MODIFY Material Document ITEM

Hi,
We are using BAPI_GOODSMVT_CREATE in  Z program. One of our requirements forces us to modify the generated Material Document.
Any BADI or enhancement that allows this ????
MB_BAPI_GOODSMVT_CREATE and MB_DOCUMENT_BADI don´t allow any modification.
Thanks.
Regards.
Orion.

Hi Prabhu;
Thanks for your reply.
Due to a specific requirement we need to change the freight vendor that is displayed in the mat. document.
We haven´t found any BADI or enhancement that allows it.
Any idea??
Thanks.
Regards.
Orion

Similar Messages

  • Pop up to enter text in QA11 and then update in material document item

    Hi everyone,
                           I have a requirementt which states that: In QA11 t-code under inspection lot stock tab if any qualtity is entered in Blocked stock then user should be prompted for a pop to enter text and that text should finally update in material document item text.If anyone has encountered it earlier please let me know  .
    Regards Pallav

    Hi Pallav,
    Please use exit EXIT_SAPMQEVA_005 "Transfer of Inspection Lot Data to User Screen"  for this purpose and if necessary create a module pool screen for user interface.
    Regards,
    Gaurav

  • Modify material document

    Dear experts,
    Can i modify material document qty with movement 542.I tried using MB02 but found qty as disable so
    could not succceed.
    I found one function module MB_CHANGE_DOCUMENT  which  can also modify quantities beside other
    mseg mkpf fields.But this change happen only in  MSEG .In MBLB transaction ie stock at vendor end , i do not find comensurate effect.What to do here ?

    Hi Prabhu;
    Thanks for your reply.
    Due to a specific requirement we need to change the freight vendor that is displayed in the mat. document.
    We haven´t found any BADI or enhancement that allows it.
    Any idea??
    Thanks.
    Regards.
    Orion

  • The question about max line item in material document

    Dear  sir:
    I want to excute CO27 for an FP . It will create material documents. The max line item is 100 in each material document. But I want to record 400 lines in a material document.  Is it possbile to change the number of max line in material document?   How could I do to change that ?   Thanks !!

    I know about 333 in case of physical inventory because the finacial document has a technical limitation of 3 digits for Fi document item number, which means the FI document cannot take more than 999 lines.
    In case of physical inventory a material document item can create up to 3 FI item lines. So the limit for physical inventory became 333.
    I dont know from where you have the 100 as limitation, but take the above said into consideration before you change anything.

  • Expand items on a material document

    The system allows to post 100 items per material document and after that it create a new document. How can we have the system to allow more than 100 items per material document? Is there any configuration/developement?

    Dear,
    When a material document is posted, a corresponding FI document is generated. The number of the the FI document items can exceed the number of the material document taken as a basis in some cases by more than the double (for example, with an active material ledger). When the system tries to write more than 999 FI document items, a termination occurs.In order to prevent this, the number of the material document items is restricted to 100.
    In the exact specification of a statistic, 100 items were proven to be favorable in performance measurements.
    The number of the maximum items per document should be a customizable statistic.
    For details read OSS Note 172678.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Material document line item - inventory valuation affected ?

    Hello
    In the framework of building a stock report, I'm trying to know if a material document line item has affected inventory valuation that is to say if a corresponding accounting document line item has been posted.
    Explored solutions :
    - there is no link between MSEG and BSEG
    - I tried to look at Quantity string (BUSTM) in MSEG and looked at Quantity strings parameters in T156M but couldn't find a parameter of the value string mentionning if it affects inventory valuation or not
    Thanks a lot in advance for your inputs
    Regards

    Hi,
    MKPF is for material document header table MSEG is for material document item table
    Creation date will be at the header table, use document number to link both the tables.
    Regards
    Merwyn

  • FM/BAPI for creation of Material Document (similar to Transaction MB1C)

    Hi Gurus,
    Good day.
    Are you guys aware of FMs / BAPIs that can produce Material Documents (similar to the Function of Transaction MB1C)?
    Thank you very much!
    Best regards.
    Brando

    hi
    in addition to BAPI_GOODSMVT_CREATE ,you can try user exits as well like
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0002 Customer function exit: Segment text in material document item
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc
    hope this helps
    regards
    Aakash Banga

  • Material document printing: is program SAPM07DR prepared for smartforms?

    Hi everyone.
    We need to do a smartform to print material documents through a new output type. Do you know if program SAPM07DR is prepared to work with smartforms? I don't think so, I see that it is prepared for sapscripts and PDF-forms, but it seems not to be prepared for smartforms.
    In case that it is not prepared to work with smartforms, do you know any standard program that print smartforms for material documents?
    Thanks in advance.
    Regards.

    These programs doesn't fit with the requirements. I have found program SAPFM07P_SMART, but the problem is that this program is prepared to print an smartform per material document item, and I need to print a smartform for the whole material document information.
    So if you don't know any other program, I suppose we will have to addapt a copy of SAPFM07P_SMART to work with the whole material document, and not with every item.
    Thanks.

  • Hot to copy document items in process order

    is there any settings to copy document items to process order?
    I have added item categary D in master recipe (BOM of material) of material.
    But when i create process order for that material, documents items is not getting copied.
    is any setting is there to copy it?

    Dear Vishal,
    If my understanding is correct,then I think document items does not gets copied into process order and further to this there is
    no key's to view the document as like that is available in a production order.
    If you check at the header - general data in a process order only operation/component overview keys will be available,where
    as in a production order in addition to these keys,you can check for document overview and sequence overview key's
    available.
    I'm unable to get any link in SAP help related to the same.Correct me if my understanding is wrong.
    Regards
    Mangalraj.S

  • Material documents? Urgent !

    I transferred stock from one plant to another.
    in sending plant movement type is 641, material document xxx with multiple items
    in receiving plant movement type is 101, material document  number yyy.
    how to find respective material document items of sending plant(xxx) in receiving plant material document (yyy) ?

    I may have more number of material document items for the particular stock transfer po in receiving plant side.
    how to find the respective material documents and   items in receiving plant for particular item of material document in sending plant?
    there may be, in sending plant for one material document , there may be more number of material documents in receiving plant for same purchase order no & purchase item

  • Creating spection lot material document wise.

    Dear Friends,
    There is one RM having  batch management active,  now when i do GR against PO client need to split the quantity to say 25 batches ( ex. 5 tons paper received but there may be 25 roles of 200 kg each having each one separate batch no.) . So going by std process, system is creating 25 insp. lots. My requirement is system should generate  only one lot  per material document. ( since batch management is active , in Quality view of material master in insp setup system is allowing only for each material document item or material doc and batch). Pl guide me is it possible to create singe inspection lot  for split GR with batch management active.
    Since there is no fix quantity of roles coming in truck using of skip inspection won't seem to be right choice. Pl correct if it is other way.
    Best Regards
    Shekhar Mokashi

    Dear Shekhar
    In that case Skip will not also work as you may not have a picture of the stokc coming etc.
    I dont have a solution  for this now. What i can suggest is make use of user exits in this case. Try using this exits and check whether it can help you or else check the exit in MIGO. Give a login in such a way that only for the first line item or so the inspection lot is created
    QAAT0002 Control of acceptance lots/goods receipt          
    |  QBCK0001 |Enhancements to function module group QBCK 
    |  QBCK0002 |Extended check in procurement
      QBCK0003 |Extended QM check for goods receipt                                 
    Regards
    Gajesh

  • Material document & Accounting document

    Hi Friends,
    Please explain me difference between Material document & Accounting document.
    Vipul.

    Hi Vipul,
    Material document
    In the Inventory Management system, when a goods movement is posted, a material document is generated that serves as proof of the movement and as a source of information for any applications that follow.
    A material document consists of a header and at least one item. The header contains general data about the movement (for example, its date). Each item describes one movement.
    Accounting document
    If the movement is relevant for Financial Accounting (that is, if it leads to an update of the G/L accounts), an accounting document is created parallel to the material document.
    In some cases, several accounting documents are created for a single material document. This might be the case, for example, if you have two material document items with different plants that belong to different company codes.
    The G/L accounts involved in a goods movement are updated through an automatic account assignment.
    For goods receipts for purchase orders, goods movements for stock transport orders and consignment withdrawals, business partners may have different local currencies. Therefore, as well as the local currency, the accounting document must also contain another currency for processing and postings. For this purpose, accounting documents created as a result of these goods movements will automatically be managed in the local currency and in the document currency. You can switch between both currencies by choosing Settings ® Currency display.
    Regards,
    Raja.

  • Modify quantity of an item in material document creation!

    Hi all,
    I want to change the quantity of an item in a material document, before the commit on the Database.
    I was thninking in the following BAdi:
    MBDOCUMENT_BADI_ 
    MBMIGO_BADI_
    However, I believe none of these can do what I whant...do You have any hint that could help me?
    Thanks in advance
    JEC

    Hi,
    Try this:
    BAdI Definition    MB_BAPI_GOODSMVT_CREATE
    Description        Enhancement BAPI_GOODSMVT_CREATE
    Interface          IF_EX_MB_BAPI_GOODSMVT_CREATE
    Regards,
    MdZ

  • Excise duty for some line item of material document is not posted

    Dear CIN Exerts,
    In my Scenario user is Posting Excise invoice for every GR (105) by J1IEX to generate Excise invoice.
    In some Past cases, if there are more then one line item in a GR then Excise value for some material is not showing (May be that time user not Did J1ID (Excise rate maintenance ).
    Now the problem is that we wants to post excise Duty for those material WRT  material document for whom it was not posted.
    Please let me know that how can we do so (excise posting against Material document) so that it get reflected (for those line items for which Excise deuty is not posted)   in MIGO > Document Display> Excise items tab .
    Regards,
    Ashutosh

    Excise posting is not recommended by sap for movements 103 or 105.
    Refer or search for SAP notes with subject CIN Limited functionalities.

  • Error message:Material document contains no items (order: 40000004 item: 00

    Good Day SAP expert,
    I have facing an error message on Material document contains no items (order: 40000004 item: 000010) & Message no. /DBM/COMMON286.
    This error happen when I want to create Good Issue with action QGIS (Create Goods Issue (DBM)).
    Steps that I create vehicle order:
    1.     Go to /dbm/order01 and select 3010 u2013 Vehicle Order based on Model
    2.     Then I create for a new customer with model sales code
    3.     I save the vehicle order in DBM.
    4.     I go to VELO to create vehicle on Peugeot model sales code and create PO, good receipt and incoming invoice.
    5.     Then I use action QDBM to enable vehicle to DBM.
    6.     I assign the vehicle (DBM) to my vehicle order (created based on model).
    7.     The assignment is successful; therefore I would like to do Good Movement (good issue). Error : Material document contains no items pop up.
    8.     I have try with create VELO, assign QDM and create 3000 u2013 vehicle order, Good Movement able to perform.
    I apply snote 1527931 - Problem with reading of document flow on nonunicode systems.
    Its doesn't work, system say still say that material document contains no items.
    is it advisable change error message to warning message?
    Please advice.
    Thanks
    regards,
    ng chong chuan

    I am not sure but this coudl be reason.
    You have created a vehicle but you have not created the purchase order and Goods Recipt for the Vehicle, means the VEHICLE IS NOT IN YOUR INVENTORY
    First check whether the vehicle is in inventory or not, if not then not possible to do Goods issue.

Maybe you are looking for