Modify Partner Function from Header level to Item level

Hello experts,
A help please!!!
Scenery:
I need to have: - When I create a Sales Order, I can have differents Carrier Partner Fuction for each line.
Currently we have a Partner Function (Carrier) defined at Header Level.
I need to modify it in order to have a Carrier Partner at Item Header.
Many Thanks all,
Barbara

Hello Barbara,
Go to SPRO - SD - Basic Functions - Partner Determination - Set Up Partner Determination -
Select - Set Up Partner Determination for Sales Document Header
Select TA - Standard Order & select "Partner Functions in Procedure" from left side.
Go to the Partner Function of Carrer & make sure that there is NO TICK MARK in the "Not Modifiable" check box. (This will let you change the Carrier at Header level also, if required.
Go to SPRO - SD - Basic Functions - Partner Determination - Set Up Partner Determination -
Select - Set Up Partner Determination for Sales Document Item
Select N - Standard Item & Select "Partner Functions in Procedure" from left side.
Go to New Entries & Enter Carrier Partner Function & make sure that there is NO TICK MARK in the "Not Modifiable" check box. This will let you change the Carrier at Item level.
Hope this helps.
Thanks,
Jignesh Mehta

Similar Messages

  • Partner function in header level of sales order

    Hi All,
    During the sales order create/change (VA01/va02).
    Depending upon the business unit i want to populate partner function.
    I have modified the user exit "MV45AFZZ - userexit_save_document_prepare " and userexit_save_document .
    i tried both the exit.
    During debugging its deleting from the XVBPA table but its not reflecting in the final screen.
    in final screen its showing the partner function from master data it is not updating from the exit.
    << Moderator message - Everyone's problem is important >>
    Thanks in Advance.
    Edited by: Rob Burbank on Nov 11, 2010 3:49 PM

    you can populate  XVBPA-UPDKZ = 'D' for the row you want to delete from XVBPA.
    I Hope it will work for you.
    Thanks
    Raj

  • Call partner function from ship to party

    Dear Gurus,
    I have two account group A and B, A contain the partner function of SP, SH, BP and PY, and B account group having function of ship to party, bill to party and payer.
    In configuration i have made the settings.
    At sales order level i enter the sold to party and if enter different ship to party in the next field system call the BP and PY from Ship to party master record. that is as per requirement.
    But if i presss enter after entering the sold to party no system call all the function from sold to party, and then if i change the ship to party system only change the ship to party but not again determine the BP and PY partner function from ship to party.
    Kindy suggest the possibe solution so that system again the redetermine the bill to party and payer function.
    Looking for the gurus response.
    Regards,

    Hi,
    In your partner partner procedure against partner function BP or PY enter source as SH then system will determine this to functions on basis of Ship to party
    Or else either you can not maintain other partner functions in sold to party master means you can take all partners from ship to
    Or else manually put ship to party immediate after sold to party and then enter
    Or else check any user exit available for re-determination of partner
    Note : First option will definitely work, try
    Kapil

  • Replication Of Z Partner Functions from CRM to ECC

    HI All,
    We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC.
    So can some onle please tell me how to do this?.
    Thanks in Advance,
    Arun

    1. Create the partner function in ECC
    2.  Assign the partner function to the relevant partner procedure in ECC
    3. Create a partner function in CRM
    4. Map the partner function as follows:
    Customer Relationship Management
    --> Basic Functions
    --> Partner Processing
    --> Data Transfer
    --> Distribution of Partner Functions from R/3 into CRM
    Create the following entry:
    Partner function in R/3         Function
    and also the below:
    Create a mapping entry for data transfer from CRM to R/3 via the
    following IMG activity in CRM:
    Customer Relationship Management
    --> Basic Functions
    --> Partner Processing
    --> Data Transfer
    --> Distribution of Partner Functions from CRM into R/3
    Create the following entry:
    Function     R/3 function    Type in R/3

  • Download Z Partner Function from R/3

    How to download a customer specific Partner function from R/3 to CRM.
    Have done PIDE settings in R/3.
    Have done number ranges and groupings in CRM.

    Hi,
    Which grouping you checked in CRM?
    Have you check data transfer R/3-CRM and CRM-R/3
    in tcode SPRO : CRM->Basic Functions->Partner Processing->
    Data Transfer->Distribution Partner Functions from R/3 into CRM
    CRM->Basic Functions->Partner Processing->
    Data Transfer->Distribution Partner Functions from CRM into R/3
    Hope this help
    Gun.

  • Replication of partner function from ECC to CRM

    Hi experts,
    We are working on CRM 5.0 with back end ECC 6.0
    In our scenario we are creating sales orders in ECC and replicating it to CRM.
    Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
    Is there any way by which we can populate this ?
    Points will be rewarded for suitable solution.
    Regards,
    Madhu

    hi
    just mainatining partner function wont be enough ,you need to do two things
    1. mapping of BP function between CRM and ECC
    2. specify the path from ECC to CRM so that they can be replicated successfully
    so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
    this is the path where in distribution you need to specify the path
    and maintain there the mapping between the R3 and CRM
    RFC destination should be CRM and source is ECC
    best regards
    ashish

  • Partner Function Address change at line item level - Item Partners checkbox

    Hi guru, we have a requirement that we need to change the address for partner function at line item level without changing the partner number. Currently the ship-to partner function address is automatically coming from the header although the number is modifiable but not the address (when double click into the partner number, the pop-up is grayed out). It is probably because the Item partner check box for the shipto partner is not checked (field name: SD_PARTNER_POSFLAG). However that field is not modifiable in VA02 either.
    If the shipto partner number is overwritten, then the item partner check-box is automatically checked and allows address chanage. Is there a way in the configuration that can default the 'item partners' checkbox for certain partner so the address can be changed without the need to overwrite the account?
    Any advice is appreciated.
    Thank you.

    If the item level ship-to party is derived from header partner function, but you want to change the address at item screen rather than header level.  On item screen, enter the same function, the same number again in a new line, "item partner SD_PARTNER_POSFLAG" is then ticked. Then proceed to the address change.
    No need to do modification.

  • Multiple Partner Functions for a Sales document Item

    Hi,
    Can you please advise on modeling scenario for showing multiple partner functions for a given sales document in BI Report ..
    Because Key figure values should not be distributed for multiple records just becos of multiple partner functions but users want to see them in the reports along with sales doc and key figure
    I am explaining bit more clearly...
    I can achieve above requirement by having below model ..
    SDOC     ITEM  PF1  PF2  PF3  AMOUNT
    1000       10      AB    CD   EF    50000
    PF : Partner Function
    but as I feel it is a complicated task  to add more and more columns fro partner functions as and when new partner functions have been added or requested to show by users at sales doc level...
    So Can you please advise a better solution to meet the same requirement.
    Thanks & Regards,
    BRK
    Please advise me on this scenario
    Thanks & Regards,
    BRK
    Edited by: BRK on Jul 22, 2008 9:19 AM
    Edited by: BRK on Jul 22, 2008 9:29 AM

    SalesDoc______Item_______PartnerFunction________Amount
    80000_________10_____________A1_______________$1000
    80000_________10_____________A2_______________$1000
    80000_________10_____________A3_______________$1000
    This will be the normal display in the cube if there is only one Partner Function.
    But what we need is
    SalesDoc______Item_______PartnerFunction________Amount
    80000_________10_____________A1_______________$1000
    80000_________10_____________A2_________________' '
    80000_________10_____________A3_________________' '
    The Amount (KF) should be populated only for the first record for a SalesDoc / Item combo.
    You load data from source to the ODS, say delta.
    Suppose that the below record is already available in the ODS.
    SalesDoc______Item_______PartnerFunction________Amount
    80000_________10_____________A1_______________$1000
    And you get the following data as DELTA in the Data_Package from the source.
    SalesDoc______Item_______PartnerFunction________Amount
    80000_________10_____________A2_______________$1000
    80000_________10_____________A3_______________$1000
    If you populate the Amount again for these 2 records, then the total would sum to $3000, which is wrong.
    So what we do is,
    Write a Select stmt for ALL ENTRIES in Data_Package and fetch the records from the target ODS. Have it in an Internal table, say t_ODS1
    Take the SalesDoc / Item from the Data_Package and chk if it is present in the internal table t_ODS1.
    If it is present, then populate the Amount as ' ' (Blank)
    Else populate the Amount as $1000.
    Say, you are getting 3 new records, which is not present in the ODS1.
    In that case, your internal table t_ODS1 will be blank.
    Now again, we need to populate the Amount only for the first record among the 3 records.
    So, here comes the "Flag".
    Set the Flag as X, when we populate the Amount.
    Everytime chk the Flag <> X.
    Only if it is <> X, populate the Amount.
    Else Leave it Balnk.
    Hope I have explained in detail
    Regards,
    Balaji V

  • Custome Partner Function from SD to CO-PA

    Hi,
    I have created 3 custom partner functions and have assinged in customer master. I need these 3 custom partner function to be transfered to CO-PA during billing. Is there a easy way around to achieve this, coz there are some SAP notes which are sort of confusing and complex, since we are already live in production, we cant take a chance on the SAP Note.
    If somebody experienced like this, could you please share the knowledge, how to achieve this.
    Thanks.
    With Regards
    gj

    Hi Gj,
    There are no simple way around to get the customer partner function in to CO-PA during billing. You must follow the notes to get the correct value transfered to CO-PA. I will outline the steps below so that you do not miss anything.
    I am going to try to summarize the basic steps to add one or
    more new partner function(s).  For more detailed information
    please see the notes 36557, 32878, 12682 and 93658 although some o
    these notes are known for you.
    Add new domain/data element for the new partner function in the
    ABAP/4 Data Dictionary.
      Examples are the data elements KUNAG, KUNWE, KUNRE, KUNRG,
      SPDNR, and VRTNR in structure MCPARTNER. This is where the
      partner functions for the Standard Sales Information System are
      defined.
    Save the new partner field in structure MCPARTUSR (user part of
      structure MCPARTNER) or, if available extend structure
      MCPARTUSR by an append structure (ZAMCPARTUS).
    Make sure that the check tables and foreign key relationships are
      maintained for the new fields in structure MCPARTUSR
    Define the assignment of partner function <  > new partner
      field in the communication structure.
      Program RMCSUZ10, routine USR_PARTNER_GET.
      Add the line as in the example of note 12682 given.
    Include the corresponding field via transaction 'KEA0' from the
      structure PAPARTNER into the Profitability Analysis data structures
    If your new partnerrole is a representative/sales employee please
      apply note 32878.
    Should you have implemented note 43002 (to prevent a field overflow
      in pricing) please follow note 93658 and use userexit
      userexit_pricing_prepare_tkomp instead of
      userexit_pricing_prepare_tkomk.
      userexit_pricing_prepare_tkomp is contained in Include MV45AFZZ
      (sales order) and RV60AFZZ (billing)
    Add the new field to the structure 'KOMPAZ' as in note 93658
      described and  NOT  to the structure 'KOMKAZ' (note 36557)
      (you have used both structures)
    Generate the operating concern and check if the following entries
      are included in TKEZU:
      Charact.  BTran Table      Field name  Offset  Length
      XXXXX     KEDR  KOMP      YYYYY
      XXXXX     KEDR  KOMP      YYYYY
      XXXXX     KEDR  KOMP      YYYYY
      XXXXX = Field name of the partner function in the  profitability
      analysis
      YYYYY = Field name of the partner function in structure KOMP
    (these entries should be made automatically here).
    If you need more than one partner function please repeat the
    steps as described above for your need.
    Regards,
    Abhisek

  • Partner function from PO to delivery.

    Hi Experts,
    The necessary partner function the I assigned to the vendor got listed in the purchase order document, but the same is not getting updated to the delivery in the cross company sale scenarion.
    Is there any way to bring in all the partner functions that are appearing in the PO to the delivery documents header partner.
    Regards,
    Emaya
    Message was edited by:
            Emayavaramban S
    Message was edited by:
            Emayavaramban S

    Hi Experts,
    The necessary partner function the I assigned to the vendor got listed in the purchase order document, but the same is not getting updated to the delivery in the cross company sale scenarion.
    Is there any way to bring in all the partner functions that are appearing in the PO to the delivery documents header partner.
    Regards,
    Emaya
    Message was edited by:
            Emayavaramban S
    Message was edited by:
            Emayavaramban S

  • Does SRM support Vendor Partner Functionality from ECC?

    Does SRM support or sync up with Vendor Partner functions in ECC such as OA, VN, PI, etc.?
    Initial look at SRM does not suggest that SAP has made it easy to replicate partner functions in SRM.

    Hi,
    See these related threads:
    Partner function Payee in SRM
    Adding Partner Function to R/3 PO from SRM in Classic using BADI
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Copy partner function from sales order to WBS element

    Hello
    Does someone know if it is possible to copy the partner function and its assignment from the sales order to the WBS element?
    In our project, we create sales order with article having a strategy group (85) view MRP3. Thanks to that a network and a WBS element is created in background based on template. In the template a partner determination procedure is maintained => partner tab in the WBS element is displayed (CJ20N) but the partners maintained in the sales order are not populated.
    Is something missing in the customizing?
    Is it possible to do it in standard?
    Kind regards
    Chris

    Hello Tison.
    I guess you have the Project created with a BAPI in your system in background. As far as I have seen I'd try the following in ABAP to create Partners in the Project Definition: BAPI_BUS2001_PARTNER_CREATE_M or the corresponding method ProjectDefinitionPI.PartnerCreateMultiple. This should happen in background when the Project is created also.
    Best regards.
    Jens Schmid

  • Replication of Partner Function from CRM 5 to ECC6 Issue

    Hi experts
    Is someone able to assist with pointing me in the correct direction to resolve a partner function replication issue please. We create all entities/BPs in CRM, and replicate them to ECC.
    We have a custom partner function, ZF, that is held against Payer and Sold-to in ECC. This is a separate entity in CRM, but is sent according to relationship assignment to ECC. We have noticed that this partner function is not being updated correctly.
    Scenarios:
    Ending a relationship between Account/Customer (Payer/sold-to in ECC) and the Farm (ZF partner function) - the ZF partner function is removed in ECC. This is correct behaviour.
    New Account or Customer creation in ECC with ZF relationship assigned, ZF partner function is being created in ECC. This is correct behaviour.
    HOWEVER, when adding a new ZF relationship in CRM to an existing Payer/Sold-to, the ZF partner function does not get created in ECC. This is incorrect behaviour - new valid relationship should trigger ZF partner function in ECC.
    Also, name changes to the ZF maintained in CRM, is not being updated in ECC for existing relationships. Instead, the Partner Function tab, ZF type, displays the old name for the Farm.
    BUPAREL bdocs are being created and sent to ECC, however something is happening on the receiver end. How do we trace this, and does anyone have any ideas on where to start to find out what is happening here?
    Many thanks
    Cara

    Solved, internal issue usage tab not being completed correctly so not assigning partner function

  • Delte Partner function from a new Ticket.

    hi,
    i am using COM_PARTNER_BAID+>Determinations_adin3  to check when the ticket is created, the user logged in is defaulted as employee responsible.  i want to delete the entry if the user is not an employee.
    can anyone guide me..
    Thanks & Regards
    DINESHSM

    Hello,
    You have to check the PARTNER DETERMINATION procedure
    Goto the PATH: IMG->SALES & DISTRIBUTION->BASIC FUNCTIONS-->PARTNER DETERMINATION->Parter Determination for Customer master.
    Select the Partner determination procedure and choose the Partner function.
    Please check whether the Partner Function was assigned to the ACCOUNT TYPE and also to the  Sales document type.
    Check this and let us know the result
    thanks,
    santosh

  • Problem in passing customer Partner Functions from ECC to CRM

    Hi to all, I am facing the following error in the crm system
    1.Partner 0000080059(DCEAB7AC31DA22F1B7CE001372368B21): the following errors occurred
    Message no. BUPA_MW_EXCHANGE010
    2.Status exists already for this business partner
    Message no. CRM_BUPA_FRG0050012
    3.Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    Message no. SMW3018
    My scenario in ECC is: I use a custom BTE copy of VMD_VENDOR_BTE_1421_IMPL which is executed when I save a new vendor. In this BTE I use the FM SD_CUSTOMER_MAINTAIN_ALL to create a customer with the same attributes as the vendor, because only customer informations (not vendor informations) pass as Business Partners in CRM. The problem is that when I pass only master datas to the FM SD_CUSTOMER_MAINTAIN_ALL, the customer passes to CRM as a Business Partner with the same number, but when I pass also Partner Functions to FM SD_CUSTOMER_MAINTAIN_ALL, no Business Partner is created in CRM, and the error I get is that up.
    What can I do?
    Thank you very much,
    Antonio

    Hola Antonio,
    I have a same problem.
    You can tell me the solution.
    Please.

Maybe you are looking for

  • HT204053 What is best way to use a corp apple ID for icloud and let users use their Apple ID in itunes store?

    What is the best setup for us to maintain ownership of our corp issued iPhones and iPads yet allow users their personal apps from their iTunes accounts? I have gone out and created a corp apple ID that we are using in the iCloud setup on all our corp

  • Why does itunes say my sim card is not supported?

    i have an at&t iphone i just picked up from the apple store yesterday with original at&t sim card that was working until after i restored my phone.  This is the 4th iphone this has happened to in the last month. i wanted to restore my iphone 4 to fac

  • Problem with WSDL generated with wscompile JAX-RPC

    Ok well I have successfully built a Web Service (From an existing wsdl) and Static Stub Client they work perfectly. I then I tried to connect to it using a Delphi Web Service Client. The client cant change, the problem I am getting is it is requestin

  • No Audio From Source

    Hi guys, I'm trying to convert .mts files to .f4v or some other working format in AME but AME shows that there is No Audio in the source as below. When I click the encode button, true enough, the output file doesn't have any audio in them. I'm 100% s

  • Blackberry Sync and MacBook:  Where did my data go?

    I just used Blackberry Desktop Software to sync my Blackberry with my MacBook for the first time.  Everything seemed to proceed properly, with no error message of any kind or anything else to indicate any problem. But now my Data is off my phone...An