Modify the HYSL System 9 login-screen

Hello! How is it possible to modify the Hyperion System 9 BI+ Workspace startup / login screen (/workspace/index.jsp)? We would like to add new content on this page ("What's new" an user-related messages). TIA!

Hi there, Well, I do not know about any documentation for that. But as faras changing the JSP pages, its very easy. I have always done this. Putting new pictures and new textwas just as easy as editing the JSP page. This is for login screen.To changes pictures for applications (after login pages), these areusually stored in image folder on your webserver. Disclaimer: I have not done these in System 9 but versionsbefore that. Since its still java, it should be the sameprocess. Good Luck.

Similar Messages

After Hard System Freeze, Login Screen is Pinstriped and Unresponsive

I had a hard freeze on Sunday on my G5/2x2 PowerMac running 10.5.6. I could move the mouse, but nothing else on the system responded. The dock wouldn't even unhide. I couldn't force quit anything. So, I shut down the system using the button on the Mac. When I tried to start the Mac, I got to the login screen, but it had a pinstripe and then froze on the screen with the Apple, but no login screen. I tried booting with the shift key. Same. Then, I tried booting from the internal back-up drive and a got a pinstriped screen with a question marked folder, then the same freeze. The same happened when I attached a firewire boot drive and tried to boot holding cmd-opt-shift-del. Same result. Any ideas? Thanks.

In my original post I said that, after the hard freeze, I restarted my Mac and got to the login screen. I did NOT get to the login. I meant to say that I got to the grey screen with the Apple logo. I don't know if that makes any difference in diagnosing the problem. Thanks in advance for any suggestions.
EDIT: Also, when I tried to zap the PRAM, the system never chimed. As I said, the screen stayed black the whole time and I held the keys for more than two minutes, which is way longer than it should take based on my experience from back in the 1990's. I don't remember having to do it since I switched to Mac o/s X.
Message was edited by: Neil2

How to edit the custom message in login screen

I did this and forgot how I done it, And having remembered I hope this will help any one who needs to customise their login screen message.
1     Callup system preferencies pane and click on Security & Privacy
2     Unlock the padlock in the lower left corner
3     In the General tab edit the box under "Show a message when screen is locked" then close the padlock to make changes.
There are many times this has been asked with various answers ranging from "download ......" to "find... and edit file...." all seems too much work there when its already catered for in osx.

Try resetting your device.
Hold down the Home and Sleep/Power Buttons until the Apple Logo shows up.
Ignore the red slider if it appears.
This will reboot the phone, no data should be lost.

TERA modifying the messages/Text in portal screens

Hi All,
We are implementing SAP Travel and expense management as a part of ESS implementation. We have some requiremnts to modify the standard texts and messgaes that appear on the portal screen.
I am aware that the message in Travel and expenses are maintained in the backend (R/3) and passed on to portal through a BADI.
Can someone please share me the BADI's and message classes used for this purpose?
Thanks for your help....
Regards,
Bharath Mohan B

this can be modified in two ways....
1) to create tracks in NWDI and modify the text in the webdynpro code
2) the text can also be changed using the iview properties...

On the iMac user account login screen, what does the checkmark mean?

On my iMac, I have 3 user accounts. Sometimes I have noticed that next to 1 of the 3 account names that I will sometimes see a small white check mark in a red circle. What does this mean?

I just received the same login for the first time in a while. I had left my MacBook Pro asleep for several days and then turned it back on and the wakeup/login screen presented a similar red circle with a white check mark inside. Did you find an answer? I created a new post today to see if anyone has had anything similar, not sure if it's firevault or not confirming id...

I want to exit and get to the operating system from a screen with no file-exit option

System appears to lock me in the browser. Is there an easy way out of this?
For instance during loading is there a way to prevent Firefox from loading (perhaps a function key or an escape key sequence?) Operating system is Linux.

Try http://kb.mozillazine.org/Firefox_hangs and [[Firefox hangs]] (Hang at exit)

Modify the text of a data field on the screen

Hi,
I am looking to change the text of a SAP data field on the display screen for an infotype 106. I have the required object key for it. When I entered the key it logged me successfully, however it displayed a message that I am not authroized for changes. Infact as a developer my user profile has the highest authroization level 'SAP_ALL'.
I am looking to modify the module pool MP010600 and screen number 0100 on the infotype screen 106.
It displays the message:
"you have no authroizations for the authroization object 'S_DEVELOP' which would allow you to change the screen'. I checked with the admin guy. He did not have a clue either. Am I missing something?
Any thoughts how to resolve it?
It would be very helpful.
Thanks in advance,
VG

Thread closed.

ITS Custom Login screen password expirey option?

Hi all,
We have included the custom login screen in the ITS service. By using login and password parameters in the service parameters.
But in this the new custom login screen doesn't have the new password option or it cannot detect the password expiry of the sap users login into the ITS service.
Can anyone please let me know which system variable handles the password expiry for the SAP login.
Or can anyone let me know the standard program for the ITS SAP standard login screen.
Thanks Urgent requirement. rewards will awarded for the all the responses
Thanks & Regards
Ekta

if its Integrated ITS, then you can refer to this blog on customizing login screen.
/people/sergio.ferrari2/blog/2007/04/06/bsphowto--customizing-the-design-of-system-logon-page-in-netweaver-04

Svc:/system/console-login:default failed repeatedly

I am in desperate need of help. I installed some patches from Sun Update Manager and rebooted as instructed. My system comes up but when I tried to login through the console, the login prompt keeps coming back, thus no users can log into the system. I even tried to ssh into the system and when I enter my username and password, I get a blank screen and cannot do anything.
I use a laptop to access the system through a hyperterminal serial port and when I navigate through directories as root, I cannot run ls commands or more on files. I do see an error message using the ls command:
ld.so.1:ls: fatal: libsec.so.1: version 'SUNW_1.2' not found (required by file /usr/bin/ls)
open failed: No such file or directory
Killed
When I use the svcs command, I see that the svc:/system/console-login:default is on maintainance. I disabled it and tried to enable it again, but the service stays offline. I tried all kinds of svcadm commands to get the service running, but nothing works.
I also tried killin the sulogin so that the sulogin service becomes disabled and enable system/console-login, but that didnt work either.
I tried using the svccfg steps, nadda. Can someone help? Thanks.

who -r
run-level Sep 11 15:58 last=
uptime
11:01am up 98 days 20:02, 2 users, load average: 1.02, 1.02, 1.04
Actually all services are running like nis and nfs properly and all can login using ssh remotely, system is not rebooted that I am seeing this maintenance root password message,
when I killed sulogin process , then console-login seemed to go online but then again went to maintenance mode..

Customized netweaver login screen needs seperate login for every mime

Hi all,
we are running ECC6 and have customzed our netweaver login screen (copied CL_ICF_SYSTEM_LOGIN to <ownClass>, redefined HTM_LOGIN, maintained it in SICF, etc.).
And it works great - but:
At the first call the system wants login/pw of each mime used on the login screen.
But only for the first time.
I can't repeat it.
But it happens to every user.
Correctly deleting cookies (close all screens; control->internet options-> delete cookies) CANNOT repeat the behaviour.
Globally invalidating http server cache CANNOT repeat the behaviour.
mimes on login screen are called like:
https://<servername>:<https-port>/sap/bc/bsp/sap/public/bc/bsp/<applname>/xy.jpg
So we need a login to see our login screen
pls help...

> All URLs under /sap/public run with user SAPSYS and so don't need any login.
Bugger here is that the code which retrieves the object from the MIME repository makes an authorization check.
CL_MIME_SERVICES method -> MIME_CHECK_AUTHORITY
So it cannot run under SAPSYS as the user cannot be assigned any authority, let alone S_DEVELOP... (which in my opinion is much too strict here...). You will need to save a SERVICE user's logon credentials into the ICF service to make it visible to the user who has not logged in yet.
Or... use SSO..
Cheers,
Julius

User Account problem - bounce's back to Login screen

Here's a new one for ya. My 24" iMac (OSX 10.6.2) will allow login on some but not all user accounts. I currently have 5 different user accounts on my iMac (we are a family of 5). No problems ever with logging in until SL upgrade. Now 2 of the 5 user accounts act strange. When you click an account everything appears fine, then you see a quick flash of blue screen and you return to the main user account/login screen. I can select any of the 3 other accounts and everything works as it should. I repaired permissions and that didn't help. Any ideas?

In System Preferences > Accounts, for each account you can assign "login items".
These will start automatically when the account logs in. If there is something that
is not compatible with Snow Leopard, it may be causing problems.
Easiest thing to do to verify this is to remove them.
You will need administrator access to the accounts panel to make the change.
Dave

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Diferent password expiration days for different users in the same system.

Hi sdn gurus,
We need to configure different password expiration days for different groups of users in the same system.
We know how to configure the system to define a password expiration time for the complete system (parameter login/password_expiration_time), but we must configure some expiration time to a group of users and another expiration time to another one in the SAME system.
Somebody know a way to do this?
Thanks in advance for your help!!!

Hi Sunny,
Thanks for your reply!!!
We know the parameter is for the complete system ... but we are trying to find out if exist another way to define diferent passwrod expiration days, to diferent group of users (may be with an additional system parameters or UME configuration).
Thanks to all for your help.

Screen Sharing via iCloud on Lion Freezes at Login Screen

After updating to OSX Lion 10.7.3, screen sharing between two computers via the Internet allows me to connect to the remote computer and see the remote user's login screen, but as soon as I click on a user to login, the screen share image freezes before I can enter the user password.
Using iCloud Back to My Mac because all machines have the same Apple ID & password. Exact same setup worked before the 10.7.3 upgrade, but it could be coincidence.
Details:
Can see the remote computers in my finder,
Can click on them and connect successfully using either the Apple ID or the name and password a user that is allowed under Sharing -> Screen Sharing,
When clicking on "Screen Share," the computers connect and I'm prompted to either "Ask to Share the Display" or "Connect to Virtual Display"Since there really isn't anyone using the computer, I select "Connect to Virtual Display"
After clicking "Connect to Virtual Display" the Screen Sharing window shows the remote computer's login screen, whcih shows the user names, their icons and "Sleep" "Restart" or "Shut Down" on the bottom of the screen. One user has an orange circle with a white checkmark next to it.
Previously, I could click a user's name or icon, enter the password and control the remote Mac. Now, not amount of clicking works.
Have tried disconnecting and reconnecting as different users or using Apple ID without changes in the perofmance. Have restarted both machines.
Any help?

I'm having the same problem screen sharing to a Lion 10.7.3 machine, I get this message.
However, it works just like it used to when I screen share from a 10.7.3 machine to another Mac running 10.6.8.
Any thoughts?
Thanks!

BOE-XI (R2) - Rename CMS name in Login Screen for CLUSTER

BOE-XI (R2)
Cluster with Two (2) physical servers side-by-side hosting all BOE services.
Both Tomcat and IIS installed on both physical servers.
We don't want the end-users of InfoView to see/know the underlying server names (eg. BOE_SERVER_1 and BOE_SERVER_2 ) in the URL for the CMC / InfoView - or in the CMS Name on the login screens for those applications.
I assume that we can use some kind of DNS service in front of the website to mask that, but I don't know how we can "rename" it in the CMS name in Login Screen.
What we want is to use a name like BOE_PROD for the URL path - and for the CMS Name on the login screens for CMC / InfoView
Anyone done this before...? Any documentation you can point me to...?
Thanks in advance!
Edited by: Mark Richardson on Oct 31, 2008 5:29 PM

Here is one of my best findings on the matter.
DNS ---
The DNS bit is not documented but here is how I achieve this. The cluster configuration should be documented in the deployment or admin guide.
For XIr2 to run with DNS, you need to add -port to the CMS, IFRS, OFRS and RAS (if you use crystal) - check the SAP notes to see because there are differeences between the CMS and other services for this. You will use the DNS name in this parameter instead of the hostname.
From what you explained, you will need at least two DNS's
In -port, use the dns name for the CMS (the DNS MUST match the IP address of the server where the CMS run if you want it to work)
In EVERY services, you will need to change the -ns parameter to match the DNS name other registration will fail.
Client tools will have to use the DNS or clustername.
From my tests, DONT change -name. If you manage to do so, feel free to tell us more about it.
--- Cluster name ---
For that bit, I'll give the quick information, but the reference is the documentation.
What follows is for tomcat. However, as stated above, the documentation explains pretty well how to achieve this for IIS too and you just need to replace hostname by fqdn in every bit that tells you how to configure this.
For the name visible on the logon page on InfoView, it is in the web.xml Note: you can set the default name to the cluster name and even hide the CMS name if you want. (tomcat/webapps/businessobjects/enterprise115/desktoplaunch/web-inf/web.xml)
The default value for the cms should be there, and a specific part is commented for the cluster names. If you want to use the clustername as the default value, you'll need to uncomment the part for it and fill in the required information (ClusterName and CMS DNS names) and then change the default value. This is required because Tomcat doesnt know how to resolve the clustername otherwise.
Same thing goes for the CMC: (tomcat/webapps/businessobjects/enterprise115/adminlaunch/web-inf/web.xml)
Restart Tomcat and BO and you have a fully DNS compliant BO server with a cluster name based on the DNS.
Let us know how it goes.
Cheers,

Modify the HYSL System 9 login-screen

Similar Messages

Maybe you are looking for