Modify vendor number when replicating vendor master data from ECC to SRM

Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
David

Hi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban

Similar Messages

Vendor number entered in customer master data-error

When entered the vendor number in the customer master data in contrao data tab in general data and save it ,system throws an error enter address number.
Double click on the error it gives below message :
Please enter an address number
Message no. AM016
Please advice.

Even if the address for both are same still it gives error,and also if the address is different the error is thrown.Both the ways it throws the error.I get this error only when i enter vendor no in customer or customer no in vendor if not it saves with out any error.
Edited by: mysap query on Dec 22, 2008 12:02 PM

Issue while replicating the Master data from R/3 Backend to SRM

Hi experts,
I am supposed to do replication of master data from ECC 6.0 R/3 to SRM System.
I have issue at T- Code: R3AS.
For Initial Load of objets :
1) DNL_CUST_BASIS3
2) DNL_CUST_PROD0
3) DNL_CUST_PROD1
I am getting following error. :
 The following Errors/Warnings occured. Do you want to continue?
 DNL_CUST_BASIS3: No active entry in Table SMOFSUBTAB. Read OSS note 339787
 DNL_CUST_BASIS3: No active entry in Table SMOFSUBTAB. Read OSS note 339787
 DNL_CUST_BASIS3: Object will not be loaded
for all the objects we re geting the same error.
In OSS Note 339787 :
Reason and Prerequisites
You attempt to start the initial load of the R/3 adapter for an object for which no function module for processing data from the OLTP is entered in the SMOFSUBTAB table. This means that the data would be ignored if the initial load could be started.
Another cause for the output of this error message is the inconsistent maintenance of the OBJCLASS field in the SMOFOBJECT and SMOFSUBTAB tables.
Solution
Enter a processing module in the SMOFSUBTAB table or set the object to 'Inactive', so that no initial load is carried out for it. The change can occur using the maintenance Transactions R3AC5 or R3AC3.
If you want the object class to be communicated, change the OBJCLASS field in table SMOFOBJECT so that the contents correspond to the OBJCLASS field in the SMOFSUBTAB table for the object.
While checking the table entries, object
DNL_CUST_BASIS3, DNL_CUST_PROD0 and DNL_CUST_PROD1 are not there.
Table SMOFSUBTAB can not be maintained in SM30. how to maintain these entries in Table SMOFSUBTAB.
Can any one help me in this regards.
Points will be rewarded.
Thanks and regards.
Kalyan

Hi Dinesh,
i have done reqd entries in the table CRMSUBTAB in ECC?
also check other tables in ECC
CRMCONSUM
CRMRFCPAR
CRMPAROLTP in ECC
and
SMOFPARSFA in SRM
i want to know how to maintain the enteriers in Table L SMOFSUBTAB in SRM system.
regards
kalyan

Transfer Data from ECC to SRM

Hi ,
I'm trying to transfer data from ECC to SRM for creating bid document ( Function : BBP_PD_BID_CREATE ). After transferring the data I want to get the data back to ECC ( I need bid document number to write on delivery document's field ). What's the best way to do this ?
Regards.

Hi vinit ,
I've written code to call 'BBP_PD_BID_CREATE' in ECC. But ECC and SRM have different structures. So i am not sure how i can define data to send SRM.
Here is my code in ECC program
CALL FUNCTION 'BBP_PD_BID_CREATE' IN BACKGROUND TASK
   DESTINATION 'XXX'
   IMPORTING
     I_REF_GUID    =
     I_BAPIMODE    =
     I_PARK        =
     I_SAVE        =
     I_TESTRUN     =
     I_HEADER      = I_HEADER ?
     IT_ATTACH     =
     IT_DYN_ATTR   =
     IT_CONDITIONS =
    EXPORTING
      E_HEADER      = E_HEADER ?
      ET_ATTACH     =
      ET_DYN_ATTR   =
      ET_CONDITIONS =
    TABLES
       I_ITEM        =
       I_PARTNER     =
       I_LONGTEXT    =
       I_SDLN        =
       I_ORGDATA     =
       I_HCF         =
       I_ICF         =
       I_TOL         =
       I_WEIGHT      =
       IT_EXCHRATE   =
       E_ITEM        =
       E_PARTNER     =
       E_LONGTEXT    =
       E_SDLN        =
       E_ORGDATA     =
       E_HCF         =
       E_ICF         =

Error while replicating vendor master data from R3 to SRM

Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.

hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

Hi All,
I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
Please help me as to how to resolve this issue.
Thanks in advance,
Shubham

Hi Shubham,
Please check the queues in SMQ2 and what status they are showing?.
Thanks,
Faisal

Regarding Address Field while replicating data from ECC to SRM

Hi Forum,
I have a few qauestions regarding the mandatory fields that must be maintaned in ECC before replicating data to SRM..
1)Why is the address data (one we see in PA20 by selecting Addresses for the user) i.e. city and pincode required vefore replication.
2)Is there a way by which it can be defaulted so that we dont have to maintain it for each and every user?
Regards,
Anubhav

Hello,
Try if this helps.
SAP Note : Note 550055 - EBP/CRM: New integration for business partner : Section g:
Addresses: If addresses are required to generate correct business partners of the organizational unit role (in SRM, for example), the HRALX/OADRE switch is set to X (formerly: the BUPA/ADDR switch). If it is mandatory for each business partner of the organizational unit role to have an address, but the relevant organizational units do not always have a separate address, you can define a standard address. Create a separate business partner for storing the standard address. The number of this business partner, which is used as a container, is stored in the HRALX/OADBP switch (formerly BUPA/ADRBP).
Thanks
Ashutosh

SEND PR data from ECC to SRM using PI

Hi PI Guru's
Please advise if there is any documentation to send the PR's from ECC to SRM using PI.
If not PRs in general if need to exchange any documents from ECC6.0 to/from SRM using PI.
Can we use ABAP proxys or IDOCs.
Any help would be greatly appreciated.
Rgds
Nikki

decide proxy or IDOC or RFC based on the business requirement, first search any std IDOc or RFc available if not then go for proxies.
chirag

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

How to transfer data from ECC to CRM via IDocs (Clfmas01),

Hi all,
how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.
Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
Edited by: khaja fareed on Jan 11, 2010 12:44 PM

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

Data from ecc to xi to mdm

Hello
would you please let me know how data data flow from ECC-XI-MDM
Thanking you

Hi
For vendor master use IDOc of type CRemas.
for customer master use idoc OILDEB,
Configuration for sendinf any master data from ECC to XI
1. create RFC destination of type 3 in ECC using SM59 and point to your XI system
2. Create Communication Port for IDoc Processing using Transaction WE21 select the RFC destination created in above step.
3. Create Logical System (LS) for IDoc Receiver System: Transaction BD54
4. Create Partner Profile with Outbound Parameter. Transaction WE20
-Deepak.

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

*Journal Entries while uploading the vendor master data from legacy system*

hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

Hi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards

Modify vendor number when replicating vendor master data from ECC to SRM

Similar Messages

Maybe you are looking for