Modify Who's Who Service

Hi,
I want to add a label in Who's Who Service. My Team has configured the JDI. I am able to view the source code also. I am not able to view my changes back in the Standard Service. Can anyone let me know how do I make changes in Standard service and the procedure to deploy them. I guess, I am making some mistake somewhere.
Regards
Murali

Similar Messages

Problem with who's who service in portal

Hi Experts,
I have created the SAP_R3_HumanResources and SAP_R3_HumanResources_Metadata Jco destinationations and the Test connection was successful.
I have created the system alias SAP_R3_HumanResources in the portal and connection for this also successful.
When i click on the who's who iview in portal i.e Content Admin--> Content provided by SAP -->End user content--> Employee Self Services -->iviews-->Employee Search -->Who's who i am getting the same exception like before
Can you please help me what else i need to check??
Regards,
Mahesh

Hi Mahesh!
Thanks a lot for your help...
>Check this link which helped me to fix the same issue.
I checked this link already but honestly I have to say that I didn´t understand the solution:
>Metadata you have to mention the user name and password.
>Model data it should be logon ticket, you should not maintain user ID and password. If you maintain , it will >always try to fetch this user id data. In you case this is the problem
>And i want to confirm wheather you created all the required Jco's in the webdynpro content admin in >portal??
I have the problem with the service "absence management".
This service needs the following JCos:
SAP_R3_HumanResources and
SAP_R3_HumanResources_MetaData.
This JCos were already there but I had to change them. The HR backend was moved to an external provider and therefore we could´nt use SSO anymore. So I have put a technical user like your EP_ADMIN in both JCos and both are working in test mode.
But the problem is then that the service runs with the technical user and not with the portal user!!!
And yes, all our portal users are mapped to the personal number in transaction PA30.
Thanks everybody for any help...
Peter

Employee photo is not updated in ESS Who's who service

hi colleagues,
i am facing an error when i am trying to update the employee photos in the who's who service of ESS.
when new photos are added against an employee number via tcode OAAD in the ECC system, they are updated against the record and can be seen in tcode PA20. however, the new photos are not getting updated in the who's who screen. we have tried clearing the cache (figuring there might be a problem with the browser.... we are using IE 7.0) but were still unsuccessful.
any advice will be greatly appreciated.
thanx,
Amer

hello deb,
already did.... not working there as well. except for the first time during logon, it does not ask for any user id or password while viewing the photo in the portal. the photo gets updated in PA20, PA30 but does not get refreshed in the portal. the portal shows the same old photo.
any comments or advice would be helpful.
thanx...

Employee photo is not displayed in ESS Who's who service

Hi colleagues,
Please help our colleague in this issue:
1) They have implemented correctly the procedure to display photos in PA20/PA30 and the current ITS based ESS who's who is displaying the photo.
2) They are trying to implement EP 7 with XSS BP 1.0 SP10 bold however in the Who's Who service the employee photo is not being displayed.
Best regards

Hi,
Yo would have check the forum..
Display Photo in Employee Who is who search
Kind Regards
Hari Sankar M

Employee Photo not displayed in ESS- Who's Who Services

Hi All..
My employee photo upload was successful in Quality System . I can also view the photo both in R/3 employee related facsmiles , header of PA20, PA30. and also the same photo's are displayed in ESS - Who's Who services.
steps I used-
OANR, OAC2, V_T585O, OAC3, OAC0 and for manual upload OAAD & OAOH.
For Mass Upload - program- OA_UPLOAD_AND_LINK
In production in the same way , all the photo's can be seen in the facsmiles but if I checked in Who's Who..Its coming like a outline with a red cross on top corner but without any photo.
Kindly give your valuable suggesions..
Thanks in advance...

Hi Alok,
I am also facing the same issue in Prod Environment. If u r having the solution, please share with me.
I checked in NWA Trace is not registering.
currently i am facing issue with Employee Photo Under ESS--> Emp Search --> Change Own Data.
All my Employee Photos are uploaded in ECC, i am able to see from PA30 Header.
we are having same setup in QA- Environment , all the employee Photos we are able to see from Portal.
But in Production Environment, We are Having One Central Instance and Three application Instances and configured Load Balancing among Central Instance and Application Instances.
All the Servers Content Server in SICF t-Code is activated.
If i login into Prod Portal [either Centeal Instance or Application Instance] some time Employee Photo is Displaying Some time not,i.e No Photo at the top of corner X symbol. If i right click check on that URL, its poiting to the ECC server content server.
But If Not is Displaying --> Size is Showing Not Avaliable but Demension is Displaying.
But if Photo is Displaying ---> Both Size and Dimensions are Displaying Properly...
PHOTO URL Path When Photo is Displaying
http://xxx025.xxx.com:8011/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA926D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091012&secKey=MIH4BgkqhkiG9w0BBwKggeowgecCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxzCBxAIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDkwNjMxWjAjBgkqhkiG9w0BCQQxFgQUS%2BicVNGV7i6eSE8TXK5R3umNS%2FgwCQYHKoZIzjgEAwQvMC0CFQCPAZf3C48Lvl6i935mlsVqMw95owIUUJFedqFO2AoLGe6QCHHqBMSObIU%3D
Type : JPEG Image
Size : Not Avaliable
Dimension: 170*200 Pixels.
PHOTO URL Path When Photo is Not Displaying
http://yyy024.yyy.com:8010/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA927D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091451&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxjCBwwIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDg1NzQ3WjAjBgkqhkiG9w0BCQQxFgQUAP9cyWhLiOtkp4vwo9KK%2FPQtxWgwCQYHKoZIzjgEAwQuMCwCFDs729ib7fVKbiGKz5CPPd1YHch3AhR7NVgtXJI7ej07GiKMpG06lZPWoQ%3D%3D
Type : JPEG Image
Size : 3527 Bytes
Dimension : 170*200 Pixels.
We are always opening the Portal with Fully Qualifies Domain Name (FQDN)
Please suggets the Solution, how to get rid of this Porduction Issue.
Thanks & Regards
Ganesh

Link in the Who is Who iView for ITS Service

Dear All,
Can you please guide me where exactly i have to mention the link for the Service which i have to use from the ITS for the who is who iview?
I am getting the error as
No Service Name specified
Your request didnot contain service name. Please specify service name in the URL path
Example URL
http:
.....\scripts\wgate\pz01\!
I am not understanding where to specify the path exactly.
Regards,
Samir

Hello Samir,
Are you using standalone ITS.
If u are using itegrated ITS then mention the below parameter in ITS of ur portal system.
ITS HOST NAME: <host_name>:<port>
ITS PATH: /sap/bc/gui/sap/its/
ITS PROTOCAL: http
Regards
Deb

Navigation to Who's Who service from dashboard

Hi,
I get following info message when I navigate from ESS dashboard to Who's Who service.
"there are no services in this ares".
The same is not seen if the Who's Who service is accessed directly.
I am not aware of the related SPRO settings. Can some one help me regarding this? I feel this must be some thing related to configuration.
Thanks in advance,
Chinnu

Chinnu,
search for Homepage framework blogs by Christopher Solomon in sdn
Thanks
Bala Duvvuri

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

RE: How to monitor who has what service objectconnection?

We ran into this problem, specifically because we are using a dbsession
connection pattern and the dba's did not like loosing control over
connections. We have 8 subsystem, each with a dedicated connection that
is shared across multiple users. We also have a security pattern in
place that is token based. Since we have to pass a security token
through service objects we can track this information using a
"connection array" on the service object and a system agent to poll the
contents of the array. When a sql statement is invoked on a
persistence object we add the user to the array on the persistence
manager (SO). When the sql is complete we remove the user from the
array. Since the PO has a system agent we can ask the system agent at
anytime, who has an open connection/session with the PO. Since system
agents plug into econsole, the dba can go look any time.
Any questions, please contact
Chris [email protected] or
Gary [email protected]
MCI Systemhouse
From: ADRIAN PEGGY LYNN
To: [email protected]
Subject: How to monitor who has what service object connection?
Date: Tuesday, September 24, 1996 9:12AM
Here at Eli Lilly & Co., we have a customer that would like to know if
anyone out there has successfully
devised a method to be able to tell what user has what service object
connection. Basically, if a customer
calls the system administrator with a problem with the application, the
system administrator would like to
be able to kill certain processes. Right now, the database connections
running on the server all look the same.
Some ideas were generated internally, one referring to setting up agents
but we'd like to see if anyone
has had success in doing this already that we could use as a contact.
Thanks,
Peggy Adrian
Eli Lilly & Co.
[email protected]

Hello Peggy,
I suggest that you make contact with Paolo Sidoli at DS Data (Italy). They
have written a very nice package called DORE that includes trouble shooting
utilities, that allow you to monitor what a remote user is doing (you can
actually see their screen!).
You can contact Paolo at [email protected]
Best regards,
Richard

Is there any way to query who resolved a Service Request in Service Manager?

Hi,
I have a query that pulls the last name of the user who resolved an Incident in Service Manager. The name is pulled from a view called "IncidentResolvedByUserFactvw." I need to pull the last name of the person who completed a Service Request. There
is no view or table that I can find that has this info. Is there a "IncidentResolvedByUserFactvw" type view with the Service Request info? If not where is this data stored?
Thank you for any help!

couple of notes:
necromancy!
Closed -ne Completed. Completed means the work has been delivered. Closed means the work has been delivered, the client has been contacted, we've finished all of our followups and process checks, and we're ready to archive this ticket in the historical
database.
it doesn't really make sense to talk about who completed a service request. a service request is a structured process. as well as who built an item that came off the assembly line; the assembly line did. who completed the services request? if your service
requests are well designed, the overwhelming majority of requests will be completed by the system once the last activity in the process is completed.

Who's Who customizing in ESS

Hi,
We are using portal 6.0 SP17, with ECC 5.0 and the Web Dynpro based ESS applications.
1)
Is it possible to customize the fields that are displayed in the standard application, without Java coding ?
If not, can someone give me a hint of how to do that. Is it required to use the JDI -environment, or is there a easier way to do it ?
Best Regards,
Kristian Rantakoski

Yes....the selection, results and detail fields can all be HIGHLY customized all through the IMG in the backend system. You (or whoever is handling this) will find it under the ESS IMG section. The fields you can choose from all come from a standard SAP HR query. If you need other fields, you can create a modified "Z" version of that query and use it. Also, the fields for the detail tab will also be the ones that show up in the "Change own data" service for Who's Who. It will be confusing since the config you do in the "ITS services" section of ESS config will actually affect the Webdynpro versions too. Hope this helps!

URGENT : Problem in Photo Dispay in ESS Who's Who

Hi,
We have a situation there that, the employee photo is not displayed for Who's Who Service. (ERP2005)
The problem is happening in QA System, but the same is coming in the Dev system.
From the PA30 we are able to display the photo.
Kindly throw some light
Best Regards
SERA

Hi Sera,
Compare the iview properties in both DEV and TST system.
Also, compare the config in R3 for both systems.
Sathya.

Who's Who Application

I was finally able to enable the telephone number in the Who's who "Change Your Own Data" after some configuration but here is the problem.
The problem is that it only saves the telephone number the second time you run change your own data on the telephone number.
It looks like the telephone number is being changed and gives you a preview of the changes but after you complete the transaction it does not really save it. The second time you do it, it will make the changes.
I have numerous test users and tested this scenario. This is for info type 105, sub type 020 which starts out empty.
I searched the SAP service market place and so far no SAP note associated with this problem.
This are my assumptions:
Since there is no communication data for IT 105, ST 0020 on the PA record, it is technically an ADD and NOT a CHANGE - "Change your Own Data". I am assuming this is the item that is tripping the Change Your Own Data services.
I appreciate input or suggestions.
Thanks in advance.

We are running the Webdynpro version [ECC 6.0] and the portal directory version is ESS 1.50.
Here was my test:
This is for a brand new user ID and new IT 105, ST 0001.
I went to the users PA record and created IT105, ST0020 and added a phone number.
This is the first time the test users is login to ESS. I logged on as the test user and I was able to successfully changed my telephone number on the FIRST try.
I'll do some more research on the backend and more testing.
I'll keep you guys posted.

ESS Who is Who - Add search criteria

Hi all,
I have tried searching the forums, but can't find an answer for my problem. I want to add an additional field to the search criteria for the who is who iview.
I am able to change the advanced search, but I want to add a search criteria on the first screen. Changing the service for the adress book (Employee Self-Service -> Service-Specific Settings -> Address Book -> Who's Who -> Who's Who (ESS): Selection and Output) does not change this first screen.
Anyone know how I can make this change?
Thanks in advance.
Kind regards,
Marlies

If by selecting fields you mean in the Who's Who (ESS): Selection and Output, then yes.
I have there available 3 tabs, none have the default settings.
First tab I can set the selectionfields, but when changing/adding a field here, my "simple search" does not change. The changes here are reflected under the advanced search, which is nice, but not what I want.
I simply want to add 1 additional field to the first search screen, so the user does not have to always use the advanced search option.

Who's Who : does not at all show of "Placeholder" of Photo

Dear Experts
We have SAP_ESS with 600 SP16    on   SAP NW 7.00 SP20 Java System (inlcudes Application Server Java + Enterprise Portal + Enterprise Portal Core Components)
When we browse thry SAP Standard " Who's Who" - It just display the employee information ina single Line as XL sheet line item and it does not at all show atleast " placeholder" for photo.
We configured and uploaded all our photoes in the backend ABAP System as per the below link.
https://wiki.sdn.sap.com/wiki/display/ERPHCM/EmployeePhotoUpload
We understand - SAP Standard "ESS" in application -   Who's Who - should bring the Employee photo & information from Backend ABAP System.
Can any one help us to know - why placeholder for photo is missing in "who's who" of ESS applicaiton.
Thanks U
Rgds
PR

DEEPAK....THANK U VERYMUCH..
THE BACKEND ABAP SYSTEMS WAS A SYSTEM COPY OF PRODUCTION
AND THE SYSTEMS WAS CONTAINING OLD URLS in TABLE .
Changed URL in Table ""   HTTPURLLOC ""     directly thru SE16
and issue got fixed .
OSS REPLIED WITH ABOVE SOLUTION & WITH SOME NOTES
0001033071   URL generation using HTTPURLLOC entries
0000685521   Logon data for /sap/bc/contentserver service
0000712330   Accessing server content with HTTPS
0001289938   HTTPS Url does not take into account the port in HTTPURLLOC
THANKS TO ALL FOR GETTING THE SOLUTION OUT & EXTREEME INTERACTIVE MESSAGE
THANK YOU ALL
RGDS
PR

Modify Who's Who Service

Similar Messages

Maybe you are looking for