Modifying Customer Master Data - Internal error - Message no. F2531

Hi experts,
We have updated the bank details of a specific customer master data. Now when we display it, specifically in bank details, we get the following error message:
Internal error: FI_TECH_ACCNO_READ_TRY SY-SUBRC <> 0
Message no. F2531
Does anyone know what it means? Can anyone help me?
Thanks in advance.
Best regards,
Andreia Nascimento

Hi Andrea,
This message is a SAP standard message and it is not modyfiable in OBA5. The one reason for this may be you are trying to enter bank account which programme is not able to find. If this is not in your case you can take help of abaper and debugg the program.
Regards

Similar Messages

XD01 assertion failed error while updating customer master data

Hi Guys,
This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
The error is as follow
ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
The things that I have tried and not work
using xd01, fd15, fd16, fd01, does not wok and gives the error as above
The things that I have tried and it works
Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
My number is 9820029197
Will also keep you'll posted on any developments on this case,
Ronan Pinto

>
> Firstly I am from SAP FI, so totally new to SAP SD
>
Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
>
> 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
>
I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is a crooked method and/or not a professional method.
>
> 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
>
As explained above, how the sales will be accounted in different company codes (even if the system allows to assign the same sales org to different company codes)?
I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
Regards,

Vendor number entered in customer master data-error

When entered the vendor number in the customer master data in contrao data tab in general data and save it ,system throws an error enter address number.
Double click on the error it gives below message :
Please enter an address number
Message no. AM016
Please advice.

Even if the address for both are same still it gives error,and also if the address is different the error is thrown.Both the ways it throws the error.I get this error only when i enter vendor no in customer or customer no in vendor if not it saves with out any error.
Edited by: mysap query on Dec 22, 2008 12:02 PM

Error during create CR for MDGC "Enter a relevant role for creation of customer master data"

Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,

Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks

Change Message Control for Customer Master data

Hi Friends,
I have to choose/populate a message when the user is about to create an already existing customer.
In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
OK...
When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
Now .....
I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
I want to have the same message with message types 'E','E', and 'I' respectively.......
How is this possible (or) what should i do to meet my requirement :-|
Expecting ur answers
Thanks in advance ........
Cheers,
R.Kripa.

Hey yes it is not possible (as of now
I ve met the requirement by just using message statement in the program itself ............
My requirement is met but still if anyone knows about this do answer / reply
Thanks
Cheers,
R.Kripa.

Error in Customer master data creation

when I am creating customer master data, error is in sales area data :partner functions
data is not complete:
I can't proceed from there. If I choose account group 001, it is working, when I am doing with my own account grp gets eorror.
I hope I did correct partner determination procedure.
how to solve this?

Hai Jobi Thottungal,
Since you can create a Customer with Account type 001, please check what is the PARTNER TYPE assigned.
Now, GO TO
IMG Sales and DistributionMaster DataBusiness PartnersCustomersCustomer Hierarchy
Set Up Partner Determination for Customer Master
Partner Determination Procedure Assignment
Assign the Partner procedure to your Account group
So at the time of creation of Customer master with your Account group, the partner function will get created automatically.
Regards,
Mani

Error while loading customer master data through Idoc (DEBMAS) from BODS

Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan G

Hi, did you referred this link : Error during customer master mass update through XD99

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Query in customer master data upload ....?

Hi Guru's,
I am uploading the customer master data from presentaion server to customer tables using functional module SD_CUSTOMER_MAINTAIN_ALL.
while check the Function module separatly and it working properley and i am able to ctere customer...
and i am using the same function module in the program i am unable to upload ..could please check and let me know where i am doing mistake in the below program logis..and values also moving properly before calling function module..while calling the functinal module the controle comming out of the loop and program went to dump i am able to see the message in dump as like this(it may helpfull for resolve):
Name of function module...............: "SD_CUSTOMER_MAINTAIN_ALL"
Name of formal parameter..............: "O_KNA1"
Technical type of actual parameter....: "C"
Technical length of actual parameter..: 20 bytes
Technical type of formal parameter....: "u"
Technical length of formal parameter..: 3634 bytes
Name of formal parameter at caller....: "O_KNA1"
*& Report ZERP_CUSTOMER_CREATE_UPLOAD
REPORT zerp_customer_create_upload.
PARAMETERS:p_files        TYPE string.
*DATA :xkunnr(10)      LIKE kna1-kunnr. "unique KUNNR
DATA: gs_i_kna1           TYPE kna1,
      gs_i_knb1             TYPE knb1,
      gs_i_knvv           TYPE knvv,
      gs_return           TYPE bapireturn1,
      gs_i_bapiaddr1      TYPE   bapiaddr1,
      gt_t_xknvi          TYPE STANDARD TABLE OF fknvi,
      gwa_t_xknvi         TYPE fknvi,
      gt_t_xknbk          TYPE STANDARD TABLE OF fknbk,
      gwa_t_xknbk         TYPE fknbk,
      gt_t_yknvp          TYPE STANDARD TABLE OF fknvp,
      gwa_t_xknvp         TYPE fknvp.
TYPES:BEGIN OF gty_itab1,
      abc(305),
      END OF gty_itab1.
DATA: gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
      gwa_itab1 TYPE gty_itab1.
TYPES :BEGIN OF gty_itab2,
       ktokd(4),        "customer account grp      kna1
       kunnr(10),       "customer                  kna1
       name1(35),       "name1                     kna1
       sortl(10),       "sort filed                kna1
       stras(35),       "house number and adres    kna1
       pstlz(10),       "postal code               kna1
       ort01(35),       "city                      kna1
       land1(3),        "country                   kna1
       telf1(16),       "tele phone no             kna1
       telfx(31),       "fax num                   kna1
       kukla(2),        "cust classificaion        kna1
       bukrs(4),        "company code              knb1
       akont(10),       "reconcilation acct        knb1
       vkorg(4),        "sales org                 knvv
       vtweg(2),        "distr chan                knvv
       spart(2),        "division                  knvv
       zterm(4),        "terms of payment          knvv
       bzirk(6),        "sales district            knvv
       vkbur(4),        "sales office              knvv
       vkgrp(3),        "sales grp                 knvv
       kdgrp(2),        "cust grp                  knvv
       waers(5),        "currency                  knvv
       konda(2),        "price grp                 knvv
       kalks(1),        "pricing procedure assign knvv
       lprio(2),        "delivery plant            knvv
       vsbed(2),        "shipping conditions       knvv
       vwerk(4),        "delivering plant          knvv
       inco1(3),        "inco1                     knvv
       inco2(28),       "inco2                     knvv
       kkber(4),        "cred control area         knvv
       ktgrd(2),        "acc assgn grp             knvv
       taxkd(1),        "tax classification 4 cust knvi
       bankn(18),       "bank account number       knbk -
        xkunnr(10),
       END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
      gwa_itab2 TYPE gty_itab2.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                = p_files
    filetype                = 'ASC'
TABLES
    data_tab                = gt_itab1
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    OTHERS                  = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_itab1 INTO gwa_itab1.
gwa_itab2 = gwa_itab1-abc(305).
APPEND gwa_itab2 TO gt_itab2.
ENDLOOP.
LOOP AT gt_itab2 INTO gwa_itab2.
SPLIT gwa_itab2 AT ',' INTO gwa_itab2-ktokd
                              gwa_itab2-kunnr
                              gwa_itab2-name1 gwa_itab2-sortl
                              gwa_itab2-stras gwa_itab2-pstlz
                              gwa_itab2-ort01 gwa_itab2-land1
                              gwa_itab2-telf1 gwa_itab2-telfx
                              gwa_itab2-kukla gwa_itab2-bukrs
                              gwa_itab2-akont gwa_itab2-vkorg
                              gwa_itab2-vtweg gwa_itab2-spart
                              gwa_itab2-zterm gwa_itab2-bzirk
                              gwa_itab2-vkbur gwa_itab2-vkgrp
                              gwa_itab2-kdgrp gwa_itab2-waers
                              gwa_itab2-konda gwa_itab2-kalks
                              gwa_itab2-lprio gwa_itab2-vsbed
                              gwa_itab2-vwerk gwa_itab2-inco1
                              gwa_itab2-inco2 gwa_itab2-kkber
                              gwa_itab2-ktgrd
                              gwa_itab2-taxkd
                              gwa_itab2-bankn.
*moving files values from ITAB2 work area to global structure related to FM.
gs_i_kna1-ktokd   = gwa_itab2-ktokd.
gs_i_kna1-kunnr   = gwa_itab2-kunnr.
gs_i_kna1-name1   = gwa_itab2-name1.
gs_i_kna1-sortl   = gwa_itab2-sortl.
gs_i_kna1-stras   = gwa_itab2-stras.
gs_i_kna1-pstlz   = gwa_itab2-pstlz.
gs_i_kna1-ort01   = gwa_itab2-ort01.
gs_i_kna1-regio   = gwa_itab2-land1.
gs_i_kna1-telf1   = gwa_itab2-telf1.
gs_i_kna1-telfx   = gwa_itab2-telfx.
gs_i_kna1-kukla   = gwa_itab2-kukla.
gs_i_knb1-bukrs   = gwa_itab2-bukrs.
gs_i_knb1-akont   = gwa_itab2-akont.
*I FOR GOT TO INCLUDE THE ZTERM VALUE IN EXCELL SHEET SO INCLUDED HARD CODE HERE
gs_i_knb1-zterm   = '0001'.
gs_i_knvv-vkorg   = gwa_itab2-vkorg.
gs_i_knvv-vtweg   = gwa_itab2-vtweg.
gs_i_knvv-spart   = gwa_itab2-spart.
gs_i_knvv-zterm   = gwa_itab2-zterm.
gs_i_knvv-bzirk   = gwa_itab2-bzirk.
gs_i_knvv-vkbur   = gwa_itab2-vkbur.
gs_i_knvv-vkgrp   = gwa_itab2-vkgrp.
gs_i_knvv-kdgrp   = gwa_itab2-kdgrp.
gs_i_knvv-waers   = gwa_itab2-waers.
gs_i_knvv-konda   = gwa_itab2-konda.
gs_i_knvv-kalks   = gwa_itab2-kalks.
gs_i_knvv-lprio   = '02'.             "gwa_itab2-lprio.
gs_i_knvv-vsbed   = gwa_itab2-vsbed.
gs_i_knvv-vwerk   = gwa_itab2-vwerk.
gs_i_knvv-inco1   = gwa_itab2-inco1.
gs_i_knvv-inco2   = gwa_itab2-inco2.
gs_i_knvv-kkber   = gwa_itab2-kkber.
gs_i_knvv-ktgrd   = gwa_itab2-ktgrd.
gwa_t_xknvi-tatyp = 'UTXJ'.          "HARD CODE
gwa_t_xknvi-aland = 'US'.            "HARD CODED
gwa_t_xknvi-kz     = '0'.             "HADR CODE
gwa_t_xknvi-taxkd = '0'.             "gwa_itab2-taxkd.
APPEND gwa_t_xknvi TO gt_t_xknvi.
gwa_t_xknbk-bankn = gwa_itab2-bankn.
APPEND gwa_t_xknbk TO gt_t_xknbk.
gs_i_knb1-lockb          = 'X'.
gs_i_knvv-kzazu          = 'X'.
gs_i_knvv-kztlf          = 'X'.
gs_i_knvv-perfk          = 'X'.
gs_i_knvv-prfre          = 'X'.
gs_i_kna1-spras          = 'EN'.
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
   EXPORTING
     i_kna1                              = gs_i_kna1
     i_knb1                              = gs_i_knb1
     i_knvv                              = gs_i_knvv
I_BAPIADDR1                         =
I_BAPIADDR2                         =
I_MAINTAIN_ADDRESS_BY_KNA1          = ' '
I_KNB1_REFERENCE                    = ' '
I_FORCE_EXTERNAL_NUMBER_RANGE       = ' '
I_NO_BANK_MASTER_UPDATE             = ' '
I_CUSTOMER_IS_CONSUMER              = ' '
I_RAISE_NO_BTE                      = ' '
PI_POSTFLAG                         = ' '
PI_CAM_CHANGED                      = ' '
PI_ADD_ON_DATA                      =
I_FROM_CUSTOMERMASTER               = ' '
IMPORTING
e_kunnr                             = xkunnr
o_kna1                              = xkunnr
E_SD_CUST_1321_DONE                 =
   TABLES
T_XKNAS                             =
     t_xknbk                             = gt_t_xknbk
T_XKNB5                             =
T_XKNEX                             =
T_XKNVA                             =
T_XKNVD                             =
     t_xknvi                             = gt_t_xknvi
T_XKNVK                             =
T_XKNVL                             =
T_XKNVP                             =
T_XKNZA                             =
T_YKNAS                             =
T_YKNBK                             =
T_YKNB5                             =
T_YKNEX                             =
T_YKNVA                             =
T_YKNVD                             =
T_YKNVI                             =
T_YKNVK                             =
T_YKNVL                             =
   t_yknvp                             = gt_t_yknvp
T_YKNZA                             =
T_UPD_TXT                           =
   EXCEPTIONS
     client_error                        = 1
     kna1_incomplete                     = 2
     knb1_incomplete                     = 3
     knb5_incomplete                     = 4
     knvv_incomplete                     = 5
     kunnr_not_unique                    = 6
     sales_area_not_unique               = 7
     sales_area_not_valid                = 8
     insert_update_conflict              = 9
     number_assignment_error             = 10
     number_not_in_range                 = 11
     number_range_not_extern             = 12
     number_range_not_intern             = 13
     account_group_not_valid             = 14
     parnr_invalid                       = 15
     bank_address_invalid                = 16
     tax_data_not_valid                  = 17
     no_authority                        = 18
     company_code_not_unique             = 19
     dunning_data_not_valid              = 20
     knb1_reference_invalid              = 21
     cam_error                           = 22
     OTHERS                              = 23.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc EQ 0.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    WRITE: / 'Error Message:', 'error in creation'.
ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'costomer', gwa_itab2-kunnr, 'created'.
ENDIF.
ENDLOOP.

please let me know if my qestion is not clear...
and please cinfirm me ..that can i use the function module (SD_CUSTOMER_MAINTAIN_ALL) instead of BAPI (BAPI_CUSTOMER_CREATEFROMDATA1) for uploading customer master data.
please respond me ASAP.
thanks in advance and will give full points
thanks&regards
Srinivas.

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

Unable to extract Customer Master data from MDC

Hello,
We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
I have created a New Variant which properties are:
Variant: CUSTOMER_TOTAL
Description: Send all customer data to MDM
Extraction Object: CUSTOMER_EXTRACT.
Target System: PI7.
But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
We need to focus the problem. We have done the following ALE configuration.
SALE transaction:
In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
              EUS100
              MDM: Master Data Management
              PI7: Process Integration 7.0
WE21:
Transactional RFC -> PI7, IDOC record types SAP Release 4.x
RFC destination: SAPSLDAPI
BD64
New Model -> PFMC
Add message type: Model iview: PFMC
                             Sender: EUS100
                              Receiver: PI7
                             Message Type: DEBMDM
WE20 transaction shows:
Partner profiles -> Partner Type LS (logical system)
                    PI7: Outbound parmtrs. DEBMDM, SYNCH.
Any idea will be very helpful,
Thanks in advance
Marta.
Edited by: Marta Sánchez on Jul 9, 2008 12:34 PM

Sorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
before that I have done the following steps at SAP ERP:
    1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
    2. SM59: I have checked successfully 700PI70CLNT RFC connection.
    3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
    4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
and at SAP PI:
     5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
     6. technical and business system for sender SAP system(System Landscape Directory)...
- Maybe some of the previous steps is not correct....
- Is RFC Destination = PI7 is correct in step #5?
- Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
- I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
Please any idea will be very helpful.......
Thank you!
Best regards,
Marta.

Customer master data table KNVV is missing

Hi All
I a trying to cancel the billing document using transaction VF11. System shows error as " customer XYZ customer master data table KNVV is missing"
Please advice how to proceed?
Thanks and regards
satyaprasad

Hi,
Goto the T.Code "Se11/SE16".
Enter the table name as "VBRK".
Enter your invoice number.Execute.
Check the value of "VKORG(Sales Organisation)","VTWEG(Distribution Channel)" and "SPART(Division)".
Or you check the same in "VF03" screen also.
Make a copy of the above three fields.
Goto the T.Code "Se11/SE16".
Enter the table name as "KNVV".Enter your customer number in "KUNNR" and the values of "Sales organisation,Distribution channel and division" into their respective fields.Execute.
Check if there are any entries.The result should be no entries so that only you will receive this error message.
If you created the customer with out sales area,while creating the order only it will give you an error message as "No customer master record exists for sold-to party XXXXXXX
Message no. VP199".
As the partners are defined in sales area data only.
Regards,
Krishna.

Outbond interface programme to upload customer master data.

Hi experts,
i need to develop an outbound interface programme to upload customer
master data,which will be received from sap and posted to web methods using
standard function mudule.can any one help me?

Hi,
Hi,
Primary you should have Message type, Idoc type and Function module or Report to process Outbound interface.
If your's is an Customized Process, then follow this.
1. Create Message type in we81.
2. Create segments in We31
3. Create Idoc Type in WE30.
4. Assign Message type to idoc type in WE82.
5.Create an Partner profile in WE20.
6.If you are creating an function Module create it in SE37.
7. Assign it to process code in WE41.
8. Charactersitics of FM in BD51.
9. Assign FM and IDoc And Message type in WE57.
<b>ALE IDOC</b>
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards

Validate Street and House Number in the Customer Master Data (xd01/xd02)

All.
I need to validate if the fields street and house number are in blank in the Customer Master Data transaction (xd01/xd02). I found an user-exit (EXIT_SAPMF02D_001), which I can validate the customer data (KNA1, KNB1, etc) before to save. The problem is in the KNA1 structure, there aren't the fields street (STREET) and house number (NOUSE_NUM1), there is only the field STRAS, which street and house number values are concatenated.I solved this problem using field-symbol to catch these values in the screen, but I know it isn't a good solution. Is there another solution to solve this ? I had problem using this user-exit. It shows a message error type 'E' when either field street or field house number are in blank, after show this message if the user click in the tabs navigator button before press enter button, the transaction shows the error message "System error on reading table DYNTAB, screen no. 0370". Does Somebody know this problem?
Best regards,
Alexandre
ps: I'm coding in the ECC 6.

Amit.
Thanks for your suggestion, but I need to validate these values typed by the user. When I create a customer, I can't get these values in the ADRC table.
Regards, Alexandre

Customer Master Data interface to external using Seeburger on MDMP

Hi Experts,
   Currently, customer master data is interfaced to external system via IDOC. The middleware used is Seeburger.
   If the system is changed to MDMP, would there be any impact to this interface?
   Is Seeburger communicates in Unicode? If so, when the data is translated to Unicode when the data from R/3 is non-unicode?
   Thank you.
Regards,
Bing Fatt

Thanks Uwe,
I tried to create IDoc with BD10 for material master and I am getting two error msg as below.
Msg one
1 master IDocs set up for message type MATMAS
then Msg two
0 communication IDoc(s) generated for message type MATMAS
Is it able to get why this msg is comng and no IDoc's were generated..
Regards,
Senthil

Modifying Customer Master Data - Internal error - Message no. F2531

Similar Messages

Maybe you are looking for