Modifying default "Inspectors"/"HUD" tools?

I always want sharpening, noise, and shadow highlight opened. Is there somewhere to modify the default appearance of the inspector and/or HUD? By the way, what does "^s" mean? I have tried every combination of keyboard modifiers I could think of and can't get any keyboard combo to open these tools. Must I use the pointer? And for each image?

Forrest,
Two people from the Aperture team gave a demo in San Francisco last week.
I asked if there was a way to make the Shadow/Highlight panel persist in the HUD from image to image. They said there was not. Maybe in a later version.
A few of us asked about the problems with RAW conversions. The answer was a solid, unequivocal "Aperture has the finest RAW conversion engine on the market."
One of us asked about losing metadata. They said they'd just discovered the bug that loses metadata in exported Tifs.
I asked if there were plans to give Spotlight the ability to search the Aperture Library. They said, Wouldn't that be great? They'd had the same idea but it was up to the people working on Spotlight.
All in all they seemed VERY happy with the work that they'd done on the interface and interested in discussing suggestions but, in the limited time we had to talk to them, not so happy to address any perceived problems with the quality of the output.
I REALLY wish I'd discovered the Tif issue and made prints before the demo.
fp

Similar Messages

Inspector HUD

Is it possible to change the order of the bricks in the Inspector HUD? The default stack doesn't quite track with my normal workflow. Thank you.

No, it is not. There is a reason: the Bricks are stacked in the order that Aperture applies the Adjustments. It is advised to _generally_ follow this order in making your Adjustments.
If you look at it, some of the ordering makes immediate sense. The rest is ordered, I trust, based on sound engineering.
It took me a while to get used to this. I now think of it as a subtly brilliant work reducer: it keeps me from going round in loops and getting lost. (One of the standard questions Lightroom users have when they start with Aperture is "Where's the history list of my adjustments?". There isn't one, because the order in which adjustments are made has no effect on the Image (and Aperture is relentlessly Image-centric).)

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...

I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene

Modified Historic Accounting query tools/Inflation Accounting tool for Assets

Modified Historic Accounting query tools/Inflation Accounting tool for Assets
Does anybody know if Oracle provide such a product, or is it a third party solution that interfaces with Oracle? If you have any info on this, I would be grateful
Thanks

First check if you can add the function associated with the tools option to "responsibility exclusions" using sysadmin.
See http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/fndscrsp.htm
If not, then consider writing a personalization (one for each tools>menu option)
The personalization will fire on the "special7" (or whichever the number is).
In the actions, you should display an error message that says "This option is not available". That will prevent the user from opening the form.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

INSPECTOR HUD absolutely not working

Wow.... this is frustrating. I am using Aperture 3.1.
Suddenly, without reason, the Inspector HUD simply does not work in as follows:
a. When I first open Aperture, no problem bringing up the IHUD with "H" (as it should).
b. When I go into fullscreen mode, NO MORE IHUD. Pressing "H" briefly highlights the Menubar but NO IHUD. This is not, however, consistent. SOMETIMES the HUD works, mostly it does not (changes on reboot - if it works once, it works until I close out and rerun Aperture.
c. Single 27" i7 iMac with loads of RAM, OS 10.6.5
Never saw this screwy behaviour before. I did go ahead and rebuild my Aperture Database with no change in the screwy iHUD behaviour.
Anyone know what's up here??

MCKravMaga wrote:
Wow.... this is frustrating. I am using Aperture 3.1.
Suddenly, without reason, the Inspector HUD simply does not work in as follows:
a. When I first open Aperture, no problem bringing up the IHUD with "H" (as it should).
b. When I go into fullscreen mode, NO MORE IHUD. Pressing "H" briefly highlights the Menubar but NO IHUD. This is not, however, consistent. SOMETIMES the HUD works, mostly it does not (changes on reboot - if it works once, it works until I close out and rerun Aperture.
c. Single 27" i7 iMac with loads of RAM, OS 10.6.5
Never saw this screwy behaviour before. I did go ahead and rebuild my Aperture Database with no change in the screwy iHUD behaviour.
Anyone know what's up here??
I'd be curious to learn if this happens most frequently when you just start Aperture. Then, after Aperture has been running for a little while, the HUD performs as snappy as it should.
This happens a lot if you have a large number of presets loaded into Aperture. I was noticing the same thing and noticed that if I remove all but my most used presets, the HUD performs very snappy.
From what I've been told, Aperture must load into memory all of the presets each time you start Aperture. But, it seems to wait to do so when you select the HUD. Thus, allowing for faster launching of Aperture.
Hope this helps.
CD

Modify Default Workspace in LiveCycle Workbench

Hi All,
I need to modify default workspace(Applications are stored in Local Environment viz, C:\Users\username\Workbench ES2) instead want to store all the files in some other location, sounds the issue is silly but i am not able to find the option change it in workbench can somebody suggest on this.
Regards,
Ali

Thanks Wasil i was looking for this stuff, i still wonder why Adobe has not created a GUI to switch to different workspace or atleast an workaround should have been provided in documentation or help section
well, An one more thing i wanted to ask here is there any possibility of using SVN plugin in workbench so that i can import complete Application from SVN.
Regards,
Ali

Modify default installation path of WindowsApps

Modify default installation path of WindowsApps
First explain, I am a Chinese Windows user, my English fighting is only 5（very poor）.Then I will try to use some simple English to tell you my problem.
I use the method used in windows8 to modify default installation path of WindowsApps,but defeated.
Why I want to modify default installation path of WindowsApps?
Because when I installed software that is suitable for the traditional model, my C disc had only 10GB space.
I think Win8.1 is perfect.And I like the traditional mode and Metro interface.(I heard Win9 can’t use two modes at the same time,but I think simultaneous use of two modes the operation is very nice.)
The method used in windows8:
First,Enter WinPE,create a file that is the mirror image of WindowsApps in D disc.
Then,Enter Win8.1,make User get thechanges to the “Appx” folder under theregistry.
Last,Amended registry master key of “packageRoot”as “D:/WindowsApps”
This operation can be completed in Win8,but default in Win8.1.
So,could you tell me how to modify default installation path of WindowsApps?
If it’s impossible ,I hope Microsoft team could solve it.

In my opinion it's a bad idea to change this, as most software is set to install on drive C: and not all of it may be using the proper CSIDL system calls to get the locations.
You can be sure the majority of testing is done with applications installing in the system default location on C:.
A much better idea is to save a few Yuan and buy a much larger SSD for the system drive, then use the default drive C: locations for the operating system and installed programs.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Missing inspector HUD!?

I've been using the trial version for the past few days without issue. After installing my serial number tonight and doing the software update, every time i go into fullscreen mode and press H, my inspector hud disappears. If i reboot, it comes back at first(minimized) but as soon as i go into fullscreen mode again, it vanishes. Am i doing something wrong? Do i need to reinstall? This is getting frustrating and it never happened until tonight.

this issue appears periodically and the solution for me has been to restart aperture. sigh. as with all other aperture 3 issues i've experienced.
i've been an aperture user since v1.5.
i must say this... with all the crashes, hangs, bugs, and other strange behaviour that i've been experiencing with aperture 3, it's my firm belief that this is quite possibly the most poorly qa'd software that i've ever used from a large software house. i've come to expect this from ms and windows titles, but this really is at the top of my worst experiences.

Setting defaults for text tool in CC Acrobat Pro

I am running the latest version of XI Acrobat Pro for Mac .
I can set defaults for everything except the text typing tool.
Can anyone help?
Thanks very much!

I am trying to select it, but the moment I let go of the left mouse button it disappears.

Set default properties for Tools Content Modification Add Text?

I'm running a French version of Adobe Acrobat XI version 11.0.0.
I'm not enquiring about or alluding to the other tool that can be employed for adding text: Sign > Add Text.
For instance, I'd like to change the default font, font size, font color, etc.
Here's a picture:

Trobbel - This indeed is puzzling behavior. Clicking 'Make Current Properties Default' should preserve the default appearance for each. I don't have a solution, but merely a couple of suggestions:
1) Make sure you have installed any available upgrade for your version of Acrobat Professional.
2) Consider using the line tool exclusively - you can add an arrowhead and make one tool perform both tasks.
Hope this helps. /rmbrown

Modify default value for static parameter field programmatically

Hi,
I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
I was even able to modify the default values for the parameters, which are used for scheduling of each report.
But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
This is what I have tried so far:
Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
Any help will be appreciated.
It would be great to know if someone of you has already implemented successfully such a use-case.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PM

Hi,
For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
- Bhushan

How to modify default Space Around Component in NetBeans 6.0?

Hi,
Does anybody know how to modify the default Space Around Component in NetBeans 6.0? I use Panel and either they stick completely to the border or stand too far. I can't find any options to modify this in NetBeans 6.0. I have tried using the 'Space Around Component...' functionality, but as soon as I move an element, NetBeans automatically replaces the values I have entered with default values I am not interested in.
Does anyone have the solution?
Thanks!

I think you just have to move the component holding the alt key... that way you can put the components wherever you want to..... it was alt, or shift, or another special key, try it... i don�t remember right now

HOW TO override/modify default PTG homepage?

Hi:
I want to know how to override default portal to go homepage. I've create my wireless app that is already well deployed in a container and already working in PTG. I want to know how to modify the default ptg home. I've removed all apps from ptg to the guests users and just give access to guest to my application. I need a simple default homepage and i need to remove the SETUP link that is always displayed in /PTG/RM page. Also, can anyone tell me how to create a simple url to access my wireless portal?
for instance i have to write : portal.myorg.pt/ptg/rm and i would like to just hae to write : wire.morg.pt
How can i achieve this?
Thanks
Joao

I'm using a beta of 10G at the moment. What I did is change the oracle logo (logo.gif) with our own company's logo (http://host:port/ptg/images/logo.gif) (also the wbmp and png file) .
If you can get access to the webtool http://host:port/webtool/login.uix you can click on the system tab and look for
System > Wireless Server: Administration > Device (look at component configuration).
From here you can enable/disable standard interface options
Multi-Channel Server Setup Menu Configuration
Enable Login
Enable Logout
Enable User Info
Enable Application Customization
Enable Global Preset
Enable User Profile
Enable Self Registration
Enable User's Home Page
Enable Help
Help URL
You can change the logon page and other pages on <oracle_home>\wireless\j2ee\applications\ptg\ptg-web\modules\login
and
<oracle_home>\wireless\j2ee\applications\ptg\ptg-web\modules\iaswfr
I'm also curious if there is a more easy way to customize things.
Thomas

Modify default Safari settings in WGM

Workgroup Manager does not appear to have a location to modify the default homepage and Safari settings.
I am looking for a way to enforce a default homepage and (ideally) with specific cookie settings to enable Google SafeSearch for a user group.
Is this even possible without replacing plits in every user directory? If so, is there an Apple Script that I can write to automate this?

It's possible and pretty easy.
In WGM, when you go to Preferences click on Details. Click the add button and go locate com.apple.safari in ~/Library/Preferences. You'll want to clear out all of the keys except the ones you want to manage. I have HomePage added under Always. I also have WebKitPrivateBrowsingEnabled set to False.

Setting defaults for link tool?

Hi,
I'm creating a mega-multimedia pdf with lots of little pdfs attached to it. The customer wants each link in the megaPDF to open a mini-pdf in its own window, and each one should be set to open in "fit to page" zoom mode. When I use the link tool, I select "go to a page view", then I open the little mini-pdf attachment and click on "set link". That's great. But then I have to edit that link to have the action settings I want it to have (open in new window and fit to page). I'm hoping there is a way that I can set a default so that each time I set a link, it has those action characteristics.
Help? Please? Tired of clicking (and with some many links, sometimes I forget to go in and edit the actions )
Thanks!
P.S. I tried using the "search forum" feature to see if my question had already been answered, but no amount of coaxing and word-changing would grant me any search results.

I'm developing a web-service that will allow you to batch edit these
properties. If you're interested, you can contact me personally about it.
I have no idea why Adobe did not implement that, but I've noticed that the
links you create take your current page view setting as their default value.
So if you're on Fit Page view, the links you create will be Fit Page links,
etc.

Modifying default "Inspectors"/"HUD" tools?

Similar Messages

Maybe you are looking for