Modifying destination Directory of Application server for Open Hub

Hi All,
i want to load a csv file on application server using Open Hub.
when i have created the open hub i have specified the server name, the file name and the directory.
but the Basis guys told me that i should use another directory, they have created me a Unix Directory but the problem that i can't modify the directory path in my open hub.
can you tell me please what is the problem?
another question why i can't modify directly in Production System this parameter of server name, directory for open hub,
in production i can create the open hub but when i have transported some one from dev to prod i can't modify in prod, i have controlled from transport tool the possibility of modication object and i see that for opne hub is "original modificable"
Thanks for your help
Bilal

i have read in some forum that to " to change the server name or logical file name we can do so in the following table:
RSBFILE"
i tried to see the data of this table and i found 2 records for my open hub, 1 for Active version and 1 for Modified version
i tried here to change the path name of the directory and after saving the system give me the message that the active version and the modified version of my open hub are not equal, when i try to activate again my open hub the system take the old
directory path.
is this is the right table to change the directory path on application server of my open hub? or there is another table?
i don't work with logical filename, i work with file name and directory path name.
thanks for your help
Bilal

Similar Messages

  • Use XML files stored in directory of Application server as a input for XI ?

    I have a scenario that there is a xml file stored in sap application server for example /inf/ERQ/XML/XXX.xml which i want to use it as an input for XI. I know that there is an adapter in XI for getting xml file stored in normal path but in my situation it's in application server of SAP so i don't know how to do this.
    Any solution or example for this? Thank you in advance.
    Best regards

    Hi,
    We can read this file through FILE adapter with FTP protocol, before that i think need permission from basis for access.  Configure source(according to xml format) and target structure according to your requirement.  But one thing should remember in XI/PI sour/target XML formats should contain Message type name & namespace name else it can't work.
    Find below link for more information.
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)

  • How to create a directory in application server

    Hi all,
    How to create a directory in application server through Progaram??
    eg:\tmp - is already existing
    I want to create \tmp\fi 
    Within \tmp\fi - i should able to store my file,,,
    Kindly help me urgent...

    Hello San,
    Either contact Basis guys at ur end for the same or u can do it dynamically via a piece of ABAP code, i hope it wll help u.
    call function 'GUI_CREATE_DIRECTORY'
         exporting
    dirname = '//<ip_address>/qfilesvr400/<host>/usr/sap/TST/SYS/Folder1'
         exceptions
              failed  = 1
              others  = 2.
    Reward If Helpful.
    Regards
    Sasidhar Reddy Matli.

  • Sun Java System Application Server for Mac OS X ?

    hi everybody.
    does anybody know if (any given date ?) sun is planning to offer a distribution of its sun java system application server for mac os x ? or even better: any ideas on how to install a currently available version on mac os x 10.4 ? the linux bin seems not to be readable.
    thank you very much in advance, folks.
    and have a nice day
    andre from berlin, germany

    As you noticed, standalone MacOS distribution of application server is currently not available, but what you can do is to download NetBeans with J2EE bundle or Creator (for free) and install bundled Application Server on this platform. Download URLs are:
    http://www.netbeans.info/downloads/download.php?type=4.1
    (NetBeans/J2EE cobundle)
    http://developers.sun.com/prodtech/devtools/free/
    (Creator)
    Also, you can install and run Glassfish (which is open-source version of upcoming Application Server 9.0) on MacOS X:
    http://java.sun.com/javaee/glassfish/getit.jsp

  • Adding JBoss Application Server for Monitoring

    How do you add a JBoss Application Server for monitoring? Is there a way to add it silently like silent install of the host target?

    It is a manual process, you need to launch Jboss discover UI using Targets > Middlware page.
    Also, please use JVMD for more detailed analysis.
    You need to specify JARs based on the version of the JBoss -
    Note - Please check the support site for exact certified versions of JBoss.
    JBoss 4:
    dom4j.jar jboss-management.jar jnp-client.jar
    jbossall-client.jar jboss-client.jar
    JBoss 5:
    concurrent.jar jboss-javaee.jar jboss-serialization.jar
    dom4j.jar jboss-jsr77-client.jar jbosssx-as-client.jar
    jbossall-client.jar jboss-logging-spi.jar jbosssx-client.jar
    jboss-client.jar jboss-management.jar jnp-client.jar
    jboss-common-core.jar jboss-remoting.jar jboss-integration.jar jboss-security-spi.jar
    JBoss 6:
    concurrent.jar jboss-management.jar
    dom4j.jar jboss-remoting.jar
    jbossall-client.jar jboss-security-spi.jar
    jboss-client.jar jboss-serialization.jar
    jboss-common-core.jar jbosssx-as-client.jar
    jboss-ejb-api_3.1_spec.jar jbosssx-client.jar
    jboss-integration.jar jboss-transaction-api_1.1_spec.jar
    jboss-jsr77-client.jar jnp-client.jar
    jboss-logging.jar
    If you plan to use JVMD then you should select Remote Agent for discovery/monitoring.
    JNDI service should be configured and Naming Service port should be open.
    Agent should be able to communicate with the host and JNDI port.
    Above list of JARs to be copied on the agent machine (location provided as library path during discovery)
    Could you please share customer details and usecases.

  • How to add an app to the 'recommended applications' list for 'open with other' in finder?

    How can I add an app to the 'recommended applications' list for 'open with other' in finder?
    Specifically, I have Final Draft 8 and Final Draft Tagger 2.
    Final Draft Tagger 2 is used to manipulate and create scheduling information for movie scripts written using Final Draft.
    It is NOT on the Recommended Applications list when using Finder to open a .fdx file using 'Open with Other'.
    I've modified the info.plist for Final Draft Tagger 2 by copying the entry for Final Draft Documents from Final Draft 8 and removing the original entry, which differed. I then rebooted the machine and was saddened because it did not work.
    Suggestions?
    Thanks,
    Mike

    That's not useful.
    I want to add a app to the recommended applications list so I don't have to waste time doing this every time I want to use the app on a file.
    I thought my question made that clear.
    Any suggestions for doing this?

  • Creating Directory in Application Server

    Hi Friends,
    Can anyone help me on,
    How to create directory in application server.
    Also, I need to create one file in this directory with fixed name, how do we do that?
    Also, tell me how to use transaction FILE in detail...
    I am working on CRM and there is no transaction CB3Z ...
    Kindly help.
    Good answers will be rewarded...
    Cheers!
    Pradeep

    Hi Pradeep
    Refer the Links:
    <b>Creating a directory & subdirectory on Application Server
    API for creating a directory in the application server
    Regards,
    Sree

  • Where is the Oracle Application Server for Apex 3.2.1?

    Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHat
    I think it is here
    http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
    But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
    So, which one should I download, or where can I find it?
    Thanks.

    Hi,
    Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHatI think it is here
    http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
    But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
    So, which one should I download, or where can I find it?>
    Strictly speaking you do not need Application Server or OHS for running Apex, you have an option in ApexListener. If it is a small installation then stick to EPG that comes built-in.
    Try downloading the Oracle HTTP Server from here . You will need to check the commercial aspects yourself as OHS is not a free software for Production environment, AFAIK.
    Cheers,

  • DTP Delta request for open hub destination.

    Hi expert,
    As you know, In BW 7.0, open hub destination is used for open hub service, and you can create tranformation/DTP for the destination. and in some case the DTP delta is enabled.
    my questions are
    1) in the context menu of open hub destination, I did not find something like manage, which could list all the DTP request executed for this open hub destination..but for normal infocube or ods, you can find a list.
    2) if the DTP could enable the delta, where can I delete the latest delta request, and have a new load..
    3) I assume the DTP could be excuted with batch integrated with process chain by process type 'DTP', right ? if the destination type is third party tool, can it also be integrated with process chain ?
    4) can give some obvious difference of InfoSpoke and open hub destination in terms of advantage and disadvantage..
    Thanks a lot for the feedback.
    Best Regards,
    Bin

    Hi ,
    Please look at the links below . hope it helps .
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d063282b-937d-2b10-d9ae-9f93a7932403?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9?QuickLink=index&overridelayout=true
    Regards
    Santosh

  • Can i use oracle 8i for oracle 9ias application server for developijsp applicationes?

    hi,
    can i use oracle 8i database for oracle 9ias application server for developing jsp applicationes?
    can any one give suggetion?
    jpullareddy

    If you are using OLite, you should use the OLite .NET provider:
    http://download-west.oracle.com/docs/cd/B14156_01/doc/B13788/html/toc.htm
    Look at Chapter 6 and 11, which cover ADO.NET data access.

  • Version of Application Server for Oracle E-Business suite 12.0.4 ?

    Hi ,
    I want to know the complete version of Application Server for Oracle E-Business suite 12.0.4 . The installation guide/ rapid install mention this :
    A) Oracle database 10.2.0.3
    B)Applications Server : 10.1.3 oc4j
    C) Application Server : 10.1.2.2 (forms)
    D) E-business Applications
    But I want to know the complete version for 10.1.3 .Is it 10.1.3-3 or is it 10.1.3.4 or both ? This will help us ind determining the patches which can be applied ?
    Thanks.
    Best Regards,
    brinda

    Hi,
    Please refer to:
    Note: 468311.1 - Script to find Apache, Java, JRE, Forms version for Oracle E-Business Suite R12
    Note: 454811.1 - Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12
    Regards,
    Hussein

  • Multiprovider as Datasource for Open Hub Destination

    Hello,
    Can you pls let me know if we can used the Multiprovider as datasource for the Open Hub destination. Currently we are Bi7.0 and SP9. I am not able to see the option of Mutiprovider in the template.
    Appreciate the input ASAP.
    Thanks
    Gopal

    Multiprovider is not yet supported for Open Hub destination and hence you dont see that option.
    As of SAP NetWeaver 2004s SPS 6, the open hub destination has its own maintenance interface and can be connected to the data transfer process as an independent object. As a result, all data transfer process services for the open hub destination can be used.  You can now select an open hub destination as a target in a data transfer process.  In this way, the data is transformed as are all other BI objects.
    In addition to the InfoCube, InfoObject, and DataStore object, you can also use DataSources and InfoSources as templates for the field definitions of the open hub destination.
    The open hub destination now has its own tree under Modeling in the Data Warehousing Workbench. This tree is structured by InfoAreas.
    <b>Restrictions -</b>
    It is not currently possible to use MultiProviders as the source for the open hub destination.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7c836c907c7103e10000000a1553f7/content.htm
    Hope it Helps
    Chetan
    @CP..

  • What is procedure to make application server for existing server

    Hello Friends,
    What is procedure to make application server for existing server due to server load and no. of user..
    Thanks in advance.
    Regards,
    Sachin

    hi
    good
    go through these links,this will gives you complee idea about the creating instances in application serverl.
    http://www.erpgenie.com/sap/basis/
    http://www.sapdevelopment.co.uk/file/file_disall.htm
    thanks
    mrutyun^

  • Business Objects Query Builder - application server for data connections

    Hi experts,
    I am trying to flush out all instances where we have universes with connections pointed to the wrong application server. I was hoping to use query builder to show me the application server being used for all connections (metadata.dataconnection)
    Is this possible?
    Edited by: Khaled McGonnell on Nov 3, 2010 6:11 PM

    Hi Srinivas,
    I had tried SELECT * already : )
    The application server is the server on which the BI system you are connecting to is located. You have to define this when you create the connection in Universe Designer.
    You can see the application server for "connections if you use the following query:
    select si_server from ci_systemobjects where si_kind = 'Connection'
    However, these are not the connections used by universes. These connections are from logged in users. Any ideas?

  • Is there a Web Applications Server for Oracle8?

    hi!
    I need to know if there is a Web Applications Server for
    Oracle8 on Linux. (I know there is one for Oracle7)
    Thanks!
    null

    PoNY (guest) wrote:
    : hi!
    : I need to know if there is a Web Applications Server for
    : Oracle8 on Linux. (I know there is one for Oracle7)
    : Thanks!
    i solved the same problem while download the application server
    via ftp
    ftp ftp.oracle.com
    cd /pub/www/oas/linux
    get was302.tar.Z
    If the connection is lost, you can continue downloading with
    reget was302.tar.Z
    The download starts not from the beginning, but appends the
    already transmitted part of the file.
    Hans
    null

Maybe you are looking for