Modifying "drag and relate" screens
hi ,
is there a way to modifiy the "drag and relate" screens ?
- add new columns ?
- modify queries ?
- add new screens ?
thanks .
Hello Laurent,
The Drag-and-Relate reports are pretty much static. Changes to this report is not possible.
The queries are in-build and so are the formats and display columns.
The only think you could do is use the filter to filter the results conditionally.
Suda
Similar Messages
-
A simple question about Drag and Relate navigation
Dear experts
I have found SAP help or related manuals only good at talking difficult things such as how to customise the drag and relate targets, etc. However, after I followed exactly and then how to test.
Then I just see pieces of information, very unstructured. Spending me a whole day, even I can't get a good simple example on how to really perform a drag and relate at least for the proof of concept at EP 6.0. It spent a lot of time in describing what the navgiation panels about, what drag and relate targets. Then how to do it in once transversal. That is, with all customisation, how to drag and relate an object.
My step is with iview A, shows a purchase order details showing a drag and relate enabled object like vendor no.
Then I try to drag this vendor no. to a display vendor iview, iview B.
I have known I have to put iview A and iview B to a Drag-and-relate targets. I am sure I have done this. Does it mean opening the portal, I will see both iview A and iview B appearing at the same time in the drag-and-relate target area? However, in my case, it is not, iview A only appears in that area when I load it once, same to view B. When I load iview B, iview A links from D&R target will be wiped off. Then how I can drag an item from iview A to B while each one of them can only appear at any time.
Can anyone give me a simple guide (don't give me an internet link from help.com) I have been tired of this.
First, I would to make sure if my so called self-learnt drag-and-relate simple action is correct in the steps or really I have made something wrong in the customisation or even a bug there.
Can anyone on the planet have this experience, pls. act as my teacher in this area?
Rgds
StephenThanks
I have tried the 1st way already. But I can see both iviews existing in the D & R targets. Now I try to drag an item with business object BUS2002 from iview A to relate to LFA1 of iview B of the same back end system.
But iview B shown up with that data of LFA1 shown up (in my case the vendor no.)
I have used autocomplete relationship and I have checked it has been well-defined already. Also check from metadata at backend they are both active.
Do you have any clues to the pitfall in my case?
Rgds -
How to import custom report to drag and relate menu ?
Hi Professionals .
Kindly advice me how to add or import custom report at drag & relate menu
Any help please ?Hi Mohamed,
Please check below link.
What is Drag and Relate in SAP Business One - YouTube
https://help.sap.com/saphelp_sbo882/helpdata/en/45/100314cf465d7ae10000000a11466f/content.htm
https://help.sap.com/saphelp_sbo882/helpdata/en/45/10ff71cf465d7be10000000a11466f/content.htm
SAP - SAP Business One: Your Solution for Generating Custom Reports
Hope this helps
Regards::::
Atul Chakraborty -
Add new Item to Drag and Relate Menu
Hi Dear;
1- how can i add a new item to drag and relate menu?
2- how can i link it to an sql statement?
exp: user table (OUSR)
best regards;Dany,
Currently that functionality is not available using the SDK. Apologies.
Eddy -
Is therre drag and relate functionality in CRM 4.0 busi pack for sap 60.2
Is there drag and relate functionality in CRM 4.0 busi pack for sap 60.2 .
Rajendra redekarHi Sriram,
Mobile component changed to .Net in 5.0 so the first upgrade of support packages should not be a problem. Your only concern will be the rollout of the support package upgrade to the users in the field.
I don't know much about the upgrade from 4.0 to 7.0 and the complications around the custom code migration from vb to .net. I imagine this is something you may need to talk to SAP about.
Depending on the amount of work involved it may be easy to upgrade the CRM system and do a re-implementation of the mobile component.
Good luck.
Cheers
Andrew -
Drag and relate filter on AP Invoices not showing post dates past Dec2010
Hello experts,
Using the following version: 2007A (8.00.178) SP:00, PL:44
The customer is getting the following issue.
In drag and relate bringing up AP Invoices, the latest AP invoice is for 21/01/2011. When the customer tries to filter by posting date, the drop down list of dates only goes down to 27/12/2010.
Using drag and relate for other documents such as the credit notes this issue is not seen and the date goes into 2011.
Can anyone tell me how I can solve this issue or if this is a bug with the version the customer is using ?
Thank you
AndyHi Andy,
It might be version related. Try on a high version. PL44 is too low.
Check period indicator too.
Thanks,
Gordon -
Drag and relate from User query not working as expected
Hi All,
Could anyone shed some light on why using drag and relate from a user query is not working for me?
Drag and relate works well from all system generated queries, but not from my user queries.
For example:
- System query/report - running a system stock report and dragging the 'Item number' field result to a D&R Sales Order generates a report of all Sales Orders for the selected Item Number. As expected - success.
- User Query - running a item lookup report from a user generated query and then D&R to Sales order for the selected Item Number does not work. Error = 'No matching records found (ODBC -2028) [message 131-183]
Any ideas?
Best regards,
JohnHi John,
I believe Drag and relate only works for system form. The whole function is hard coded. It will not work for any queries including system queries.
Thanks,
Gordon -
Unable to print from drag and relate
Hello,
In SAP version 2007 you were able to print from the AR invoice details window in the drag and relate menu. In 8.8 it seems you are no longer able to do this even when logged in as a superuser. Has anyone come across this before please?
Many thanks,
KateHi,
Can you let us know the outcome in the Demo database on the 2007 A latest patch and the 8.8 latest patch?
Also, update us in which patch the issue is working in 2007A.
Kind Regards,
Jitin
SAP Business One Forum Team -
UI use my field for drag and relate
Hi.
I am not able to use my own fields I created via UI for drag and relate.
I can hold the left mousebutton pressed on the field but I don't get the
border around the field to drag it.
I know that this is currently not supported by the SDK.
Can you please implement this?
Best regards,
Manuel Marhold
SoftChip EDV-Systeme GmbH
Gutenbergstr. 25
49479 Ibbenbueren GERMANY
Fon: +49 5451-54703-40
Fax: +49 5451-54703-22
Web: www.softchip-edv.deMy suggestion is to move you entire home directory on to the hdd and leave the ssd for the os and your key applications.
How to Move the Home Folder in OS X – and Why
Move your home directory to another location -
I have been able to successfully connect to another iMac on my wirless network with screen sharing. I cannot figure out how take a file on the remote desktop and drag and drop it on to the compuer that I am working on using screen sharing...
From +*Take Control of Screen Sharing in Leopard:*+
"GET BACKWARD COMPATIBILITY WITH VNC
VNC is a widely used remote screen control technology that underlies
Leopard’s Screen Sharing software, and that Apple previously
packaged and continues to ship with Apple Remote Desktop (ARD).
VNC clients are available for nearly every platform, including nearly
every release of Mac OS X. There’s even a version for a “jailbroken”
iPhone—one that’s been modified to allow third-party software
installation.
VNC service is split into client and server components: a client is a
viewer; the server handles access to a computer’s screen and manages
input from the remote user.
Leopard’s pair: In Leopard, the server is the Screen Sharing
service in the Sharing preference pane, and the client is the Screen
Sharing application, which the Finder launches if needed.
It would be neat if Leopard could be controlled by and access VNC
clients, right? Well, it can, using either Leopard’s built-in support or
third-party software. Leopard’s support, built into the Screen Sharing
service controlled via the Sharing system preference pane, is just fine,
but if you need more options, you might consider an alternative; see
the sidebar Picking VNC Software, a few pages ahead, for details." -
1-I create a check box on the Pick & pack
selection screen. I'm using the 'top' property to position my check box at
the same horizontal level than the 'expand' button. But the check box
appears much higher than I expected. When I check the 'top' property of
the check box and the 'expand' button, I have the same value
nonetheless. Am I forgetting something ?
2-I want to modify the 'pick and pack' manager
screen to have the same selection of fields in the matrix but based on a
slightly different criteria. Is there an easy way to do that ? I would rather
avoid to build a whole new screen. So I have tried to connect the matrix
to a user defined table, but I'm getting an error message:"Item - The item is
not a user defined item"Hi Carl,
1) What do you mean by "much higher then I Expected"? The elements should line up nicely by their top. A button is higher then a checkbox, so they will not line up at the center, btu at the top...
2) First a note; there will be major changes for the pick and pack manager in the next release of SB1 (2006 version) so you might want to keep in mind that you have to rebuild everything in the near future.
Concerning your problem; it's correct that you aren't allowed to change a system matrix. One solution could be to set the visability of the system Matrix to false, and add a own Matrix on top of it. Note that you have to create the neccassery functionality for that Matrix yourself.
Hope this helps,
Rowdy -
Hi everybody,
I want to create an iView which includes a link for Drag&Relate to make this iView Drag-enabled. We are using EP 6.0 SP7 (Netweaver '04). In the guide about unification there is mentioned the method "generateDNRUrl" of the Service "IURLGeneratorService". Has anybody used that? I found no javadocs or further documentations about Service. It would be very nice if someone could post some sample code about how to use that method.
thanks in advance,
Jens HarzerHi Norbert,
I am experiencing the same problem when relating a SAP R/3 System to a web target (Google Search Form). (I also related a JDBC database to the web target and encountered the same problem)
Did you figure the problem out?
Any advice would be helpful.
Regards,
Andreas -
When I open BP Master Data and try to drag Customer Code to Sales Order the following message appears : No Matching Record found "(SDRO) (ODBC -2028) [Message 131-183].
Actually these record should be exist.
Currenty use SAP 2005 A SP01 PL46.Please make sure to choose collation setting of: SQL_Latin1_General_CP1_CI_AS when installing MSSQL 2005 Server.
In order to check what the collation is set to in your server, please
run the following query:
Collation of your Server:
select SERVERPROPERTY ('collation')
Expected answer : SQL_Latin1_General_CP1_CI_AS
Change the Collation Setting on the MSSQL Master Database only whenthe MSSQL Server is effectedby Note 987436
In case you have already installed the MSSQL 2005 server with anycollation other than SQL_Latin1_General_CP1_CI_AS please follow thesteps below:
1.Run the following query on the master database to check what collation you are using .
select SERVERPROPERTY ('collation')
2.It should be
SQL_Latin1_General_CP1_CI_AS(if you get the above then the collation is correct , otherwise please proceed as follows)
3.Backup SBO-Common & Company DB's and de-attach them from the SQL server.
4.Insert the SQL 2005 CD in the drive.
5.Go to start run and type in the following path.
Start/Run C:\Temp_install\SQL2005\SQLEVAL\Servers\setup.exe /qb
INSTANCENAME=MSSQLSERVERREINSTALL=SQL_Engine
REBUILDDATABASE=1 SAPWD=*****
SQLCOLLATION=SQL_Latin1_General_CP1_CI_AS
6. Run 1st query from to double check that you have the correct collation.
7. Attach the SBO-Common.
8. Attach Company DB
C:\Temp_install\SQL2005\SQLEVAL = this represents the path to the SQL Server installation files, so please change to your appropriate path!
INSTANCENAME=MSSQLSERVER = This is the default instance,if you have another instance please change it here!
SAPWD=***** = Change to your SA passwordhere!
Hope this information clarifies your query on how to change collation settings. -
Drag and relate outlook attachements toward room documents
Is is possible to drag outlook webacces attachments towards a collaboration room documentsdirectory?
how?I would also like to know if anyone have done something like this !
regards
Alexander -
SharePoint 2013 How to disable Drag and Drop Functionality
Hi,
In SharePoint 2013 in document library we have default behavior of drag and drop documents in document library. How to disable drag and drop documents in document library?Hi,
As a work around, you can edit the Drag and Drop js as to remove the drag and drop functionality, edit the document library page (default
page) place the content editor web part on top of the library include the modified Drag and Drop js file in the content editor web part, Please save the Drag and Drop js file to other location (probably Site Assets library etc).
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet
Maybe you are looking for
-
Does the new Media Encoder CC automatically use GPU and CUDA encoding when available? I tried to export H.264 from After Effects CC, but I found that you have to send it to AME for this, and then I'm not 100% sure if the GPU is used? I see that the G
-
Hi All, I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilit
-
Change Gl account to reconciliation account
Dear Friends, While creating a Reconciliation account I miss to assign a Vendor account in controling tab and the account become an GL account. Is it ok if I can change this account as a Recon account Is it possible to change the GL to Recon account
-
Photoshop Cs2 with windows 7 64 bits
i find that the printer icon in the page setup page is missing. can anyone help me to solve it, please. i cannot select printer while i am in the page setup tab. or it is a bug in photoshop cs2?
-
Verizon, please help! LG G2 proximity sensor bug!
Verizon, please help, the update that you required me to do on 09/23/14 has a huge bug in it and I am fearful it has not only screwed up my proximity sensor but who knows may even have compromised the security of the phone. The proximity sensor does