Modifying existing demantra to use new instance

Hi,
we have an demantra 7.3 installation. we have installed a new 11i ASCP instance. is it possible to modify the existing demantra installation to use our new instance
if possible can you guide me?
Thanks
H2B

transfered post to main EBS Discussion

Similar Messages

  • HOW DO I MODIFY EXISTING PDF FILES USING JAVA

    I HAVE CHECKED SOME OF THE THIRD PARTY SOFTWARE, HAS ANYONE DONE THIS BEFORE, IF SO PLEASE HELP

    ...which ones?

  • Modify existing rebate condition and exclusion

    Hi
    We are rebate agreements for customers. Currently I want to modify rebate condition in one of rebate agreement.
    Scenario: let us June 10th 2010 onwards, the rebate % is 3% for Profit center 'xxxx' & customer 'yyyy' instead of 1%. And 3% needs to accrued on billing docs going forward. How to set up this.
    I tried to modify existing rebate condition using VBo2 as follows: went into rebate agreement using VBo2, changed rebate % for condition record with effective from 06/11/2010 and Saved.  problem when I ran VBOF program, system posted reversal accrual for old rebate condition 1%. Old condition record validity from 01/01/2009 Valid to 12/31/2011.
    I have one more question. We want to set up rebate condition for all materials exclude some of them. we have thousands of materials for which we need to calculate rebates. but we want to exclude some materials in the rebate agreement. How to set up such exclus
    any ideas really appreciated
    thnx

    The key of your condition table (the one supporting your condition record in the agreement) is evidently Profit Center / Customer.  So for any combination of profit center and customer, you can maintain a rate and validity period. 
    You are attempting to maintain two separate records having the same key.  As you have experienced, the system does not allow it.
    The simple solution is to expire that rebate agreement and start a new one with the updated validity period and conditions.
    As for excluding certain materials, you need a more detailed key in your condition table.  Something else from the material master seems appropriateu2014Commission Group for example.  Maintain commissionable materials in group 01 and non-commissionable ones in group 02.  Then a key combination of Commission Group / Profit Center / Customer  would work well for you.
    Regards,
    Ken

  • Modify existing data using LSMW IDoc method

    Hi experts,
    I am trying to transfer activity data from R/3 system to CRM using Idoc LSMW method.
    It working fine that LSMW creates new activities in CRM system, & there is a check in the conversion code that if the activity we are trying to transfer exists in CRM system it will skip that transaction.
    Now the requirement is that we don't want to skip, if the activity is already present in CRM system than it should modify the existing.
    IDOC used :                       CRMXIF_ORDER_SAVE_M02
    Msg type used:                 CRMXIF_ORDER_SAVE
    Note:
    LSMW will not create activities in the system; SXDA data transfer workbench will be used to process the data in CRM system. SXDA project has following two steps:
    -     Merge files u2013 This step uses a custom function module to merge one or more than one files and creates a file which is   required for LSMW.
    -     Convert the data u2013 This step uses LSMW as the conversion method
    -     Load the data u2013 This step uses the IDoc object interface
    Now the doubt is that if i remove the check than it will create an another activity with same activity no. or modify the existing one, or is there another way to modify the existing activity in CRM system?
    Waiting for a qiuck response.
    Thanks
    d_marco

    HI,
    Thanks for your quick valuable response.
    I have a doubt, we are transferring activities from R/3 system to CRM system, & these activities are maintained in R/3 application system in the form of text files
    Now the question is if the text file contains 10 activities( transactions) with there header, partner & item details & from these 10 activities some are new & some are already present in CRM system, than will it be possible to create the new ones & update the existing ones withe single LSMW project run.
    I think that we can put a check in the conversion code where transaction begins that if the particular activity( transaction) already present in CRM system than set a flag as "U" to update, if activities are new than set it as "I"  to insert & than pass this flag in  the conversion rule to the field "OBJECT_TASK" of IDOC  structure
    or
    we need to maintain text files as for update or insert separately but not for mixed task of update/insert.
    Will this update/insert process also work's if we are using a copy of standard IDOC type with some custom segments & custom fields.
    Thanks
    d_marco

  • Recover Datafile Using Old Control File in New Instance

    How to Recover Datafile in condition :
    Old Instance was dropped but old controlfile still exist to new instance.

    SigCle wrote:
    If there is RMAN .bkp backup, I won't post a thread in here, and just do :
    RMAN> STARTUP FORCE MOUNT;
    RMAN> RESTORE DATABASE;
    RMAN> RECOVER DATABASE;
    RMAN> ALTER DATABASE OPEN;
    The fact is there is no RMAN backup at all. Old database just dropped and uninstalled careless by my friend.
    Fortunately there is still oradata folder(contain of control files and all datafiles).
    But, I don't know to restore it manually and by system. I don't know file id of each datafile.
    Helps / clues very appreciated.Well.If you have all control/online log/data files then there is no problem(also if you do not have pfile then create it manually according sample file).If your system is windows then create instance using oradim as
    set ORACLE_SID=<SID>
    oradim -new -sid <sid name> -intpwd <syspass> -pfile <pfile location>
    sqlplus "/as sysdba"
    startupif linux/unix then
    export ORACLE_SID=<SID>
    sqlplus "/as sysdba"
    startup

  • Internet Shortcuts saved on Desktop open new instance of Firefox 3.6 using clean profile--how can I make it open all shortcuts using current profile?

    I rely heavily on Firefox's profiling ability to assist me in my web design projects. Lately, using Firefox 3.6, I have run into some problems with how it opens Internet Shortcuts that are saved locally (i.e.- shortcuts that reside on my Desktop). When I double-click on one of these shortcuts, a new instance of Firefox 3.6 is loaded with the saved website from the shortcut, but it's also initialized a fresh profile (i.e.- my bookmarks are gone, no add-ons, etc.--it's as if it uses some sort of "hidden" clean slate to load the shortcuts).
    Is there any way to force Firefox to load all shortcuts into whatever profile I'm currently using at that given moment? I think the reason this has happened to begin with is because of the fact that I did some stuff to Internet Explorer awhile back that caused some problems with the Internet Shortcut associations and it all led to this eventuality.
    I'm running Windows XP Pro and have the following profiles with my Firefox versions:
    "C:\Program Files\Mozilla Firefox 3.6\firefox.exe" -no-remote -p Firefox3.6
    "C:\Program Files\Mozilla Firefox N\firefox.exe" -no-remote -p FirefoxN
    "C:\Program Files\Mozilla Firefox 3\firefox.exe" -no-remote -p Firefox3
    "C:\Program Files\Mozilla Firefox 2\firefox.exe" --no-remote -p Firefox2
    When I go into the "Folder Options / File Types" and double-click on "Internet Shortcut", I have the following within the "Advanced" settings (for the "open" action):
    Action: open
    Application used to perform action: rundll32.exe shdocvw.dll,OpenURL %l
    "Use DDE" is checked...
    "DDE Message" is blank...
    "Application" is "shdocvw"...
    "DDE Application Not Running" is blank...
    "Topic" is "System"
    Again, I think the root problem here is to do with the profiles and how they're handled when being opened with Firefox but I can't discern how to apply a fix with all this as I've obviously goobered this up a bit. I would really appreciate some professional knowledge on this and would prefer to avoid any reinstalls of anything if possible.

    To save your sanity with this issue, my advice is to find a method other than desktop shortcuts to open those URL's.
    1. Desktop shortcuts are going to open the Default Browser.
    a. With multiple versions of Firefox installed that would be the last version that was installed when you have Firefox set as the Default Browser in Windows..
    b. The Default Browser is going to use the Profile that shows a Default=1 in the profiles.ini file.
    c. The Default Browser with the Default Profile isn't going to open if you have any other versions of Firefox already running, and the -no-remote command line parameter doesn't work in this situation.
    2. The use of multiple Profiles and multiple versions isn't officially supported by Mozilla, and all the Bug reports that I have ever read about Requests for Enhancement have been WONTFIX'd by the developers. Basically we have to work with the limitations in Firefox and maybe improvise work arounds by ourselves. I've even seen a few threats about removing Profiles altogether in RFE Bug reports about Profiles.
    I have had so many problems over the years with this Default Browser / Default Profile thing over the years that personally I find it easier to just set Opera as the Default Browser in Windows rather than have a Profile get b0rked because some other program I am using decides it wants to open the Default Browser unexpectedly. I don't use Opera for much, but it is a lot better than IE for purposes of being the Default Browser, considering the quirks I have seen with Firefox and multiple Profiles.
    I have written a number of postings over at the MozillaZine Builds forum over the years about installing multiple versions of Firefox and using multiple Profiles. There's a lot of tips and comments provided by other multiple Profile users in one of those threads. Why don't you read those threads and see if it gives you some ideas or solutions I haven't thought of.
    http://forums.mozillazine.org/viewtopic.php?f=23&t=1062975
    http://forums.mozillazine.org/viewtopic.php?t=613873
    http://forums.mozillazine.org/viewtopic.php?t=462431
    The last thread listed has a lot of comments offered by other users, the first two threads were locked as a How-to sticky thread.

  • How do I change my apple id from an old one that does not exist anymore to the new one I use....Please help me I can't update any downloads for my apps.

    How do I change my apple ID from an old one that doesnot exist anymore to a new old? When I purchased my macbook I had a mac.com email address but now have a me.com one. My computer is linked to the mac one. I cant update my apps....some one please help.

    Well when I first purchased I had an mac address, which I have not used for a long time I started a me address about 18months ago. and up untill I updated my iPhone I have been able to use my mac.com now I cant and dont know what to do because it tells me to verify my apple ID. I put in the password etc and doesnot take me anywhere as I cant access the emails.

  • I have an iPhone 3gs and will be getting a new iPhone 4s. Once I have updated my existing 3gs with iCloud and backed up to my computer, will I be able to transfer my existing data to my new 4s using iCloud or will I need to do this from my iMac.

    I have an iPhone 3gs and will be getting a new iPhone 4s. Once I have updated my existing 3gs with iCloud and backed up to my computer, will I be able to transfer my existing data to my new 4s using iCloud or will I need to do this from my iMac.
    Thanks

    The Apple genius at the Apple store told me this would work. It failed. Basically, updating your iPhone 3GS to iOS5 wipes your 3GS of its data so you can't really do this. Some data worked. Music, photos etc didn't work at all.
    I suggest avoiding iCloud completely for a few weeks until Apple gets it working.

  • HT204074 Our new iphone5 id name is the same as an existing still in use iphone4 in the family; if I remove the devise; change its name can I then immediately associate it with the correct name.

    I have read the HT4627 but I think my original question is more specific  Our new iphone5 id name is the same as an existing still in use iphone4 in the family; if I remove the devise; change its name can I then immediately associate it with the correct name.

    You can change the name of a device on it via Settings > General > About > Name - you shouldn't need to remove the association and then reassociate it.

  • Updates are not installing already exists, will modify existing instance.

    hi all
    I have  published updates via scup and seeing below message in update store log its  not updating old version what is this message means
    Update status from update (c2f61a88-730e-47af-8119-6e3b5a789764) already exists, will modify existing instance.
    ankith

    That just means that the client already scanned for compliance, scanned again now and found out that the state for that patch (installed, required, etc) has changed.
    Torsten Meringer | http://www.mssccmfaq.de

  • How do I best integrate existing laptops for a new server?  Can I use the existing home folders on the laptops and make them into Network Users?

    How do I best integrate existing laptops for a new server?  Can I use the existing home folders on the laptops and make them into Network Users?

    Yes it will work.  I've done it for a few users in my small office.  As with anything, there are quirks that you may or may not experience.  Most quirks are app-related, due to app developers hard-coding absolute paths into their apps for things like temp files (Photoshop).  Strategies for resolving these sorts of quirks can be found via google.  You would probably have seen these quirks already when using server-based home folders for your kids.  If you haven't noticed them, then you're probably fine.
    The tech note you cited should be fine.  It doesn't explicitly say so, but you'll need to enable ssh on your server, at least temporarily, so you can upload your home folder to the server using scp, rsync, etc.  Don't try to copy the files up to the server via Finder.
    Once all your files are transferred to the server and in the right place, make sure to chown them on the server, so they are owned by the userID you created for yourself on the server.
    As with anything this involved, make a good backup of your laptop first.
    Note I have one user that isn't too happy with the responsiveness of the periodic mobile home syncing.  She has about a decade of e-mail in her home folder, probably 50 to 100 emails per day, many with attachments.  Mobile home syncing takes a long time to check and sync this huge tree of itty-bitty files, eevn with server-side file tracking turned on.  The other users are happy.
    The nice thing about mobile home syncing is that when a user "graduates" to an age where they've earned their own laptop, you can change them from a server home user to a mobile home user, with a minimum of fuss.  Also, if you lose or break a laptop, you can add a new replacement laptop to your network, and pull-down a replica of the home folder from the server, with almost no downtime.

  • What would the pricing be for adobe web hosting for me; I all ready have CS3 creative suite, an existing plan for the new Photoshop and Lightroom 5. But I need also to use Muse?

    What would the pricing be for adobe web hosting for me; I all ready have CS3 creative suite, an existing plan for the new Photoshop and Lightroom 5. But I need also to use Muse?

    Hello Fpless,
    For more information regarding your request, I would advise you to please get in touch with our Sales Team by phone.
    Phone number: 802 06016 (dial from Denmark)
    Thank you.
    Arnaud.

  • Why is it that sometimes when I use my middle mouse button to click on a link to open it in a new tab I will have it open it in an entirely new instance of Firefox instead of a new tab?

    Occasionally when I click on a link with my middle mouse button, instead of opening the page in a new tab, it will open a new instance of Firefox.
    I've looked through some of the settings and I wasn't able to find anything. It really gets to be bothersome at times because I prefer things to be in tabs instead of a new browser.

    It's not specific sites. I can middle-click on the same link 50 times and it will open it in a new tab 45 times and 5 of those times, it will randomly open it in an entirely new window. I don't know what's causing this.
    It happens so randomly that I don't know how to pin-point what it could be.

  • How to use existing leaderboard in a new app version?

    I have a live game in App Store, with a leaderboard.
    Now I'm releasing a new version. I have a new version set up in iTunes Connect, but I'm not able to select the existing leaderboard for this new version.
    How to do that? I assume it must be possible, as players should not lose any data or progress in the game when a new version is released.

    Here's a screen shot of how iTunes Connect's UI looks like. As said, the existing leaderboard can not be selected from it. (Normally I see a small "Edit" button next to "Leaderboards" header from which the leaderboards can be selected.)

  • Windows 64-Bit Oracle DBCA creating new Instance ORA-27102: out of memory

    Wondering has anyone encountered this?
    We are running Oracle 10 R2 running on Windows Server 2003 ( This database is on a 64-bit Platform)
    Memory capacity is 16 GB on the server.
    We are using DBCA to streamline db creation of the new “EDR” DB instance – here are a few different attempts we’ve done:
    (all have failed )
    FYI - during this installation we’ve monitored the memory allocation/usage of the Windows Server and there
    was about 13-14 GB Free
    The existing instance takes up less than 4GB of space.
    We tried following:
    1. Allocating 8GB of Memory to new EDR Instance without shutting down other Oracle Instance.
    2. Allocating 8GB of Memory to new EDR Instance and shutting down other Oracle Instance
    3. Rebooted Server keeping other oracle instance shutdown.
    4. After Reboot Allocated 8GB to new EDR Instance
    5. Attempted allocating less memory 2GB to new EDR instance
    6. Early this morning we also tried omitting backup scheduling as part of configuration for DBCA
    for that instance.
    Each time we received error in DBCA GUI during DB Creation at 2% completion
    ORA-27102: out of memory
    oraclehome\product\10.2.0\db_1\cfgtoollogs\dbca\EDR
    (cloneRmanRestore.log) first set of file created. (along with a RmanRestoreDatafile.sql, which failed (see log below)
    then halted install/creation of DB
    ORA-27102: out of memory
    OSD-00025: additional error information
    O/S-Error: (OS 1453) Insufficient quota to complete the requested service.
    select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
    ERROR at line 1:
    ORA-01034: ORACLE not available
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information
    O/S-Error: (OS 1453) Insufficient quota to complete the requested service.
    select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
    ERROR at line 1:
    ORA-01034: ORACLE not available
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information
    ORA-27102: out of memory
    OSD-00025: additional error information

    After much effort it was discovered it was a setting during the installation of a parameter which caused this error. Using the TEMPLATE to create a new instance, you can setup parameters
    LOCK_SGA = TRUE
    causes this error. In addition if in our situation, even if we did not use the "template" created a barebones DB instance. Once the parameter is updated in SQL*Plus it will cause the datbase to be in a in operable state.
    You can start it up with a PFILE to fix it, In windows it required modifying the registry to FORCE the PFILE to load, by running on the commandline to use the PFILE it failed.
    Hope this helps someone in the future..
    ON WINDOWS DONT USE
    LOCK_SGA = TRUE
    It may work fine for Unix/LINUX OS? But in our current config it had problems.

Maybe you are looking for

  • Supports two external monitors???

    Hello. I'm in need of a new laptop but I dont know what to buy. I'm thinking of a Macbook Pro w/ retina (would be my first Mac). But will I be able to connect it to my two external Acer monitors? Each monitor supports HDMI, VGA and DVI. I know that M

  • I would revert back to the old bt vision box in a ...

    Wasted too much time with freezing screens, black screens, slower navigation. Will probably switch to Sky

  • International characters and mod_plsql

    We are having troubles with mod_plsql translating international characters. Here is the scenario: We have an HTML form whereby the user can enter a letter. If they enter the letter 'X', by the time it calls the ACTION in the html form, it has changed

  • I can't restore my backup files. How can I retrieve them?

    If you've ever backed up your files and been unable to access the data you know it can be very frustrating.  Often times users will attempt to retrieve their data from the discs only to find that one of the discs does not work.  At first glance this

  • MDX Case Statement not working

    Hi have written the following MDX statement to create a new column calledl 'Aon Group' and group the Policy Broker Names into 2 values, either 'Aon' or 'All Other': WITH Member [Measures].[Aon Group] as Case when [Broker].[Policy Broker Name - Big 6]