Modifying existing pods

Hello all,
I'm 100% new to Adobe Connect development and 90% new to flash in general. I'm fairly surprised at the lack of resources I've been able to google up about Adobe Connect plug-ins, but maybe someone here can help. I want to modify the existing "Attendee List" pod, specifically I want to add another icon to the popup when you hover over an item in the list that would open up the person's default browser and direct them to a specific page.
What I'm really looking for is an "Is this possible? or do I have to create a new pod to do it?" If someone could also point me in the right direction to get started, well that would be great too
Thanks in advance,
John Williams

You have to create a new pod if you want to do that. Otherwise when the server was updated periodically it's possible your pod would get overwritten if you altered the original pod. I've not checked the software agreement so I am not sure if legally you are allowed under the agreement. Something to check!
You would have to create a new pod and name it something else.

Similar Messages

Problem in modifying existing records in dbtab

Hi Experts,
I am doing a report where I have created two dbtab's , one for data getting saved and
other for fetching data and modifying exsiting records..
For eg - let ZABC be the table where I need to insert or update records and ZXYZ is the table where
I need to fetch and modify existing records.
Now my probelm is :
In case of inserting new records (multiple records ) into my dbtab ( ZABC ) its working ,
but modifying existing records in another dbtab (ZXYZ ) its not wroking !! plz advice !!
If my select querry for modifying exsiting records is:
SELECT * FROM ZXYZ INTO TABLE ITAB WHERE MATNR EQ S_MATNR.
*****then its inserting a newline along with the existing records.
but when my querry is,
SELECT single * FROM ZXYZ WHERE MATNR EQ S_MATNR.
then its modifying the existing records, but only the first record.
Loop at itab.
if sy-tabix = 1.
zabc-matnr = matnr.
zabc-idnrk = idnrk.
zabc-budat = s_budat.
zabc-menge = menge1.
ZXYZ-menge = ZABC-Menge + MENGE1.
ZXYZ-BALC = ZXYZ-Menge   -   MENGE1.
ELSEIF sy-tabix = 2.
zabc-matnr = matnr.
zabc-idnrk = idnrk.
zabc-budat = s_budat.
zabc-menge = menge2.
ZXYZ-menge = ZABC-Menge + MENGE2.
ZXYZ-BALC = ZXYZ-Menge - MENGE2.
ELSEIF sy-tabix = 3.
zabc-matnr = matnr.
zabc-idnrk = idnrk.
zabc-budat = s_budat.
zabc-menge = menge3.
ZXYZ-menge = ZABC-Menge + MENGE3.
ZXYZ-BALC = ZXYZ-Menge   - MENGE3.
ENDIF.
INSERT ZABC.
IF SY-SUBRC EQ 0.
MODIFY ZXYZ.
        IF SY-SUBRC = 0.
          MESSAGE : I002 WITH 'RECORD CREATED'.
            ENDIF.
ENDIF.
Please advice
Karthik
Edited by: Karthik R on Aug 24, 2009 9:42 PM

Hi,
This is because in the second case you are not selecting records into an internal table.
As a result only the first record which satisfies the where condition is fetched.
Check if the program goes into the loop when you write second select query.
KR Jaideep,

How to modify existing concurrent program

I want to edit and modify existing pl/sql concurrent program.
what are the steps required to do this?

Hi,
Pls keep in mind that modifying standard programs is not advisable. You will get SPAU (http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/61ec66e33611d1954b0000e82de14a/frameset.htm) when you upgrade your SAP system. Try to make an own version and include as much as possible from the standard program.
Eddy

How to modify existing code of SQVI report?

Hi Expert,
There is a SQVI report which has already been created but we need to change the one for new requirement.
is there any way to modify existing code for new requirement?
Can we edit in abap workbench?
Thanks & Regards
Savita

Savita,
You can not modify SQVI system generated code. You need to go to SAVI change mode and make modifications. If your requirement is a sort of additional fields or inserting come code into the program , then SQVI is not the choice. You need to use Infoset Queries (SQ03, SQ02, Sq01).
KJogeswaraRao

How to modify existing enhancement?

I have requirement which require to modify existing enhancement.
What are the steps involved to modify enhancement?
thanks

Hi,
Check
https://www.sdn.sap.com/irj/sdn/nw-development?rid=/webcontent/uuid/2342e1f3-0b01-0010-a186-fdd404884050#section19
http://help.sap.com/saphelp_nw04/helpdata/en/6b/3f6d016d0711d396a50004ac96334b/frameset.htm
Edited by: Neenu Jose on Nov 18, 2008 7:48 AM

Modify existing rebate condition and exclusion

Hi
We are rebate agreements for customers. Currently I want to modify rebate condition in one of rebate agreement.
Scenario: let us June 10th 2010 onwards, the rebate % is 3% for Profit center 'xxxx' & customer 'yyyy' instead of 1%. And 3% needs to accrued on billing docs going forward. How to set up this.
I tried to modify existing rebate condition using VBo2 as follows: went into rebate agreement using VBo2, changed rebate % for condition record with effective from 06/11/2010 and Saved. problem when I ran VBOF program, system posted reversal accrual for old rebate condition 1%. Old condition record validity from 01/01/2009 Valid to 12/31/2011.
I have one more question. We want to set up rebate condition for all materials exclude some of them. we have thousands of materials for which we need to calculate rebates. but we want to exclude some materials in the rebate agreement. How to set up such exclus
any ideas really appreciated
thnx

The key of your condition table (the one supporting your condition record in the agreement) is evidently Profit Center / Customer. So for any combination of profit center and customer, you can maintain a rate and validity period.
You are attempting to maintain two separate records having the same key. As you have experienced, the system does not allow it.
The simple solution is to expire that rebate agreement and start a new one with the updated validity period and conditions.
As for excluding certain materials, you need a more detailed key in your condition table. Something else from the material master seems appropriateu2014Commission Group for example. Maintain commissionable materials in group 01 and non-commissionable ones in group 02. Then a key combination of Commission Group / Profit Center / Customer would work well for you.
Regards,
Ken

Modify existing Message

Hi all,
I need to change text/html part of message which I have in mail format. How to do this easily without loosing other parts of message?
Or maybe you know some better way to create kind of simple proxy for SMTP which would add and replace some text in HTML part of email?
So far I am reading message from plain stream of mail text representation (got it from Subethamail SMTP server) into JavaMail Message object. I had problem, when my changes to message were not reflected - I posted question on http://stackoverflow.com/questions/7674775/how-to-modify-existing-java-mail-mimemessage-body-parts/ and solved this one by calling message.saveChanges();
The issue is that when I call message.saveChanges() headers seams to be lost - especially those around Content Type and Charset.
My code looks like this:
public void resend(InputStream data) throws Exception {
        Transport transport = mailSession.getTransport();
        MimeMessage message = new MimeMessage(mailSession, data);
        Object content = message.getContent();
        if (MimeMultipart.class.isAssignableFrom(content.getClass())) {
            MimeMultipart mimeMultipart = (MimeMultipart) content;
            for (int i = 0; i < mimeMultipart.getCount(); i++) {
                MimeBodyPart bodyPart = (MimeBodyPart) mimeMultipart.getBodyPart(i);
                if (bodyPart.getContentType().startsWith("text/plain")) {
                    String cnt = updateContent((String) bodyPart.getContent());
                    System.out.println("ContentType = " + bodyPart.getContentType());
                    System.out.println("Content = " + cnt);
                    String contentType = bodyPart.getContentType();
                    System.out.println("Updating content type to = " + contentType);
                    bodyPart.setContent(cnt, contentType);
                } else if (bodyPart.getContentType().startsWith("text/html")) {
                    String cnt = updateContent((String) bodyPart.getContent());
                    System.out.println("ContentType = " + bodyPart.getContentType());
                    System.out.println("Content = " + cnt);
                    String contentType = bodyPart.getContentType();
                    System.out.println("Updating content type to = " + contentType);
                    bodyPart.setContent(cnt, contentType);
        } else {
            String cnt = updateContent((String) message.getContent());
            System.out.println("ContentType = " + message.getContentType());
            System.out.println("Content = " + cnt);
            String contentType = message.getContentType();
            System.out.println("Updating content type to = " + contentType);
            message.setContent(cnt, contentType);
        message.saveChanges();
}Mark on Stackoverflow suggested that problem is in bodyPart.setContent(cnt, contentType); call...
Hope that makes sense for you... and you will be able to help me...
Thanks in advance
Konrad
Edited by: 890134 on 2011-10-07 08:29

JavaMail wasn't really design to support "editing" of existing messages.
That's caused some problems over the years and I've had to fix a number
of bugs in this area. The current version (1.4.4) definitely works better
than older versions, but I won't be surprised if there are still bugs.
Even so, your code is making a number of invalid assumptions about the
structure of messages. I would suggest looking at the msgshow.java
demo program. It includes code that visits all the parts of a message.
It should be straightforward to extend that code to detect the parts you
want to modify and to change the content of those parts using the
setContent (or setText) method.
If it's still not working for you, provide more detail about what you're doing,
including a same message. (Send the details to me at [email protected]
if you prefer.)

Modify Existing infocube

Hi all,
In BW 3.1, How we can modify existing cube with 3 years of data?
I need to add characterstic in the existing cube with millions of record. If i add, then what will be the impact?
Regards,
Rajvinder

Hi,
From what I understand, you wish to have field set to either 'Y' or 'N' depending on availability of date. I assume this date is part of your BEx Query. In that case:
1. You could create local CKF and do the needful. However, you will be unable to retrieve it from your InfoCube, which means the query can undergo performance issues if data is large. Nevertheless, it is worth a try.
2. If the above does not work and you really need to have the field at InfoCube level, then you could try to create another Infocube (IC2) with key fields of present InfoCube (IC1) and add this field. After you have populated data in IC2, you can create an Infoset and you should be there.
Hope this works.

Modify existing workflow

We need to modify existing workflow in UCM but only known approach - disable step and enable it. Is any alternative way to change it UCM workflow code?

While directly writing IDOC script in the applet window is perfectly acceptable, you will experience some need to change it, thus your dilemma of having to disable the workflow in order to edit it.
It is a much better practice to put your IDOC logic in a component within a dynamichtml include, and simply reference the include in the applet.
For example, let's say your workflow is named "MyWorkflow" and you have a step called "Step1". To create code in the entry step, in a custom component create a dynamichtml include called "my_workflow_step_1_entry"
<@dynamichtml my_workflow_step_1_entry@>
do something
<@end@>
Then in the workflow applet for "MyWorkflow" --> "Step1" entry event, simply put the following code
<$include my_workflow_step_1_entry$>
Now you can edit the code in the component resource file rather than the applet, and certainly don't have to enable/disable the workflow.
The one caveat here is that changes to the resource file code will require a server restart in order for the changes to take effect, as workflow code is cached differently as I recall. There is another way to get around that limitation, but I'll leave that solution for a blog post.

Updates are not installing already exists, will modify existing instance.

hi all
I have published updates via scup and seeing below message in update store log its not updating old version what is this message means
Update status from update (c2f61a88-730e-47af-8119-6e3b5a789764) already exists, will modify existing instance.
ankith

That just means that the client already scanned for compliance, scanned again now and found out that the state for that patch (installed, required, etc) has changed.
Torsten Meringer | http://www.mssccmfaq.de

Create job and modify existing jobs in OM

Dear all
how to create job and modify existing jobs in OM?
thanks
Jeeva

[…] (as I understand it), pdf's are not a viable solution as these print jobs feature a very high resolution (1200 dpi).
I would expect the output from Finale to be mostly in the form of font characters—so a PDF you create by printing-to-file should be resolution-independent. If you have +Adobe Acrobat+, that can be verified quite easily in Document Properties, which will list all embedded fonts, but you should also be able to tell by zooming ’way in with Preview: if the score still looks sharp when greatly enlarged (and the file takes up less than a few hundred kilobytes per page), you can be sure it will print well on any suitable device. (If you print-to-file as PostScript instead of PDF, the resulting document can be downloaded directly into any PS printer, but it will likely be several times larger than a PDF version.)

How to modify a pod in dashboard component?

Hi
I am new to flex and programming in general. So please do forgive me if I do not express my query clearly or with the right info.
I am trying to build an application to show case photographs and one of the components I am using is the Dashboard built by WASI and can be seen here. It has several pods but I would like to have one of the pods load up with my own default position, width and height yet still retain the characteristics of minimizing, maximizing & drag and drop. Other than through the pods.xml file, I do not know how to modify (or which other file I should modify for that matter) so that when the application loads, it always starts with the particular pod at my desired height (top to bottom), width (about 1/4 of screen real estate) and position (left side of the screen)
Below is the pods.xml file and attached is the project zip file.
<?xml version="1.0" encoding="utf-8"?>

<views>
    
    <view
        id="view0"
        label="Sales">
        <pod
            id="pod00"
            type="chart"
            title="Yearly Revenue"
            dataSource="data/revenue.xml"
            selectedViewIndex="1"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
        <pod
            id="pod06"
            type="pieChart"
            title="Revenue by Region"
            dataSource="data/revenue_by_region.xml"
            valueField="value"
            categoryField="region"
            dataTipUnitLabel="$*M"
            dataTipLabelField="region"/>
        <pod
            id="pod01"
            type="chart"
            title="Yearly Profit"
            dataSource="data/profit.xml"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
        <pod
            id="pod02"
            type="form"
            title="To Do"
            dataSource="data/tasks.xml"
            labels="Name,Date,Description"
            dataFields="name,date,description" />
        <pod
            id="pod03"
            type="list"
            title="Company News"
            dataSource="data/news.xml" />
        <pod
            id="pod04"
            type="form"
            title="Sales Pipeline"
            dataSource="data/pipeline.xml"
            selectedViewIndex="1"
            labels="Name,Date,Description"
            dataFields="name,date,description" />
        <pod
            id="pod05"
            type="chart"
            title="Projected Revenue"
            dataSource="data/projected_revenue.xml"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
    </view>
Thank you very much for any help you may provide.
Best regards
Vanery

hi,
u may upload a file from the desktop in ur webdynpro .. thn u can save it in database and can download accordingly..
1.create a node 'FILEUPLOAD' with 2 attributes
a) FILECONTENT type XSTRING
b) FILENAME type STRING
2. Create a fileuplaod uielement
a) bind the data property with attribute 'FILECONTENT'
b) bind the filename property with attribute 'FILENAME'
3. Create a button 'UPLOAD'
a) create the action method for this button and save the contents of file in database
Data l_node type ref to if_wd_context_node.
Data l_stru type wd_this->elements_cn_fileupload.
l_node = wd_context->get_child_node( 'FILEUPLOAD' ).
l_node->get_static_attributes( importing static_attributes = l_stru ).
"save l_stru-fielcontent in database. Your file will be saved in the database in XSTRING format.
Now when you want to display this file;
1. Create a Node 'FILEDOWNLOAD' with 1 attribute
a) FILE type XSTRING
2. Create a filedownload uielement
a) bind the data property with the attribute 'FILE'
Fetch the file from database and set the File attribute of the filedownload uielemnt to display the file.
regards,
Amit

Modifying existing mail rules now even worse with Mavericks 10.9.1

Mail nightmares continue with Mavericks update 10.9.1 installed. In fact, the nightmare gets bigger. The story goes like this.
Prior to Mavericks, I created a stack of rules to move Mail messages from the Inbox to designated Mailboxes, e.g. messages from Friends would be moved to a Friends mailbox. Everything worked fine.
Along comes Mavericks, and when I Edit a rule to add a new recipient, and Apply that rule change to Move existing messages to another mailbox, messages would be Copied instead of being Moved, even though Move was the only action selected.
Now with Mavericks 10.9.1, nothing happens when I Edit an existing rule and then Apply the rule change to an existing message. The messae just sits in the Inbox and does not appear at all in the Mailbox I want to move it to.
How do I modify mail rules to move a message to another mailbox, then apply that rule modification to existing messages?

Hi BG 29,
Unfortunatelly you are not the only one with this problem. I am in the same situation with the exception that once I create the rule the new incoming messages will go to the designated mailbox. If you want to create a new rule, the message will just copy, not move to the mailbox. I contacted Apple support and a representative called me back and asked me to do all kind of stuff, but no luck. I was hopping that the update to 10.9.1 will solve this, but again no luck. I gave up in trying....I am waiting for the next update and hope for the best.

Can the Extension Builder be Used to Modify Existing InDesign Menus and Panels

Hi,
I am using the CS5 SDK to create new panels and menus for InDesign.
I would like to know if there is a way to modify InDesign's existing native panels and menues. For example, I might want to display additional information about assets in a Library panel.
TIA,
mlavie

Sorry, no direct way. You could theoretically build your own panel and then supercede the menu for ID's panel. Nobody's tried it that I know of; and, frankly, I wouldn't recommend it as it could easily break something in ID.
Bob

Modifying Existing css of a theme

Hi
I connected to http://127.0.0.1:8080/images/themes/theme_1/css
then copied the theme_4_0.css ...made some changes and again copied back the modified css in http://127.0.0.1:8080/images/themes/theme_1/css.
but now when i switch theme, there is no css on the webpage. Any idea?????
thanks

Hi,
The location of your images directory depends on how you setup your APEX instance. Do you know which database version you're using? And whether you've configured your APEX instance to use the embedded gateway, which would be the default configuration on Oracle XE and 11g. Or did you setup APEX with mod_plsq or the APEX listener? Assuming you've installed XE, and you're using the embedded gateway, then your images are actually stored in the database (XML DB), and you would need to access your images folder via FTP or WebDAV. There are several blog posts out there that talk about how to connect to the images folder via FTP, here's one: http://www.apex-blog.com/oracle-apex/accessing-i-using-ftp-170.html If you're using any of the other configurations, your images directory would simply be a local folder on the machine running your web server.
As for creating a theme, there isn't really a "guide" out there that documents how to build a new theme. But the theme structure, templates, etc are documented in the APEX user guide. To start building a new theme, I would recommend starting out with an existing one that you like, ideally one that was recently modernized by us. I would recommend themes 21-23 as starting points. And then I would create a CSS file to overwrite some of the classes in the theme CSS file, rather than directly modifying the CSS file that ships with APEX. You should also use tools like Firebug, or the built-in developer functions in Chrome/Safari to try out different CSS settings. With our modernized themes you should be able to get most customizations done through CSS. So I would suggest staying away from actually altering the templates as much as possible, at least in the beginning.
Regards,
Marc

Modifying existing pods

Similar Messages

Maybe you are looking for