Modifying Existing Web Gallery

How to I add or delete images from a web gallery which I have already published using the web module?

Lightroom doesn't seem to get rid of unused files on your existing site when you republish. To take care of this problem getting out of hand I sometimes use an FTP client to erase ALL the files for the website off the server and then republish with Lightroom for a clean site.

Similar Messages

Uploading photos from browser to an existing Web Gallery

Hi:
This question is related with this thread:
http://discussions.apple.com/thread.jspa?threadID=1077164&tstart=15
but I fell that not receiving the right answer because the topic doesn't describe the problem fine.
I uploaded a web gallery from iPhoto with success, but when try to add pictures using the upload feature in the Gallery itself in the browser, the process run fine but the new photo never appears in the gallery and cannot find it uploaded in to the iDisk either.
Tried updating the gallery from iPhoto but no success.
Hope someone can give some directions. Thanks in advance.
Alberto

Hi:
I can upload using the email feature, but no way with the upload button. Anyone?
Alberto

Possible to upload only Edited images to existing web gallery

I have a couple of large galleries and after I upload the whole thing I see a couple of edits I need to make.
How can I upload only selected images with the Web Gallery (I still want my index page to have ALL of the ones in the collection, i just want the updated ones to be reuploaded).
Rob.

Thanks for the reply, although I don't like the answer!
I have a Zenfolio account and an open source Gallery, maybe I will continue using those (using Export Plugins) although I like the Flash galleries (third party) for LightRoom.
Thanks,
Rob.

Modifying existing webi report BO 4.0

Hi Experts,
In pre-production system I executed webi report, went to Design mode --> Drag & drop a new object to the report. Then by mistake clicked on Save instead of "save As" This made changes to the original report.
I have below doubts, pls clarify.
1.) Will this affect the OLAP connection between report & data source?
2.) Do I need to made any connection again for this report somewhere?
3.) Will this affect the original report in production in any manner?
Thanks.

1.) Will this affect the OLAP connection between report & data source?
Since the changes were made only to the WebI report, there won't be any impact on the Connection.
2.) Do I need to make any connection again for this report somewhere?
Not needed. As mentioned before there will be no impact on the Connection.
3.) Will this affect the original report in production in any manner?
It will only impact if you migrate the report to Production. Revert back the changes in Pre-Prod box if it is small change else just ask the Admin team to do a reverse migration from Prod to Pre-Prod Box

Modify Web Gallery - Paypal Integration - Filename Extraction

Hi Everyone,
I'm embarking on a mission to try and create a custom web template that will integrate Paypal's "Add to Cart" buttons on the "Details" page of an exported Web Gallery. It only requires modifying a Web Gallery template file and adding the below code to the footer of the Details Page:
<form target="paypal" action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="image" src="https://www.paypal.com/enUS/i/btn/btn_cartSM.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">
<input type="hidden" name="add" value="1">
<input type="hidden" name="cmd" value="_cart">
<input type="hidden" name="business" value="[email protected]">
<input type="hidden" name="item_name" value="Purchase Standard Resolution Image">
<input type="hidden" name="item_number" value="imagename">
<input type="hidden" name="amount" value="3.00">
<input type="hidden" name="shipping" value="0.00">
<input type="hidden" name="no_shipping" value="0">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="currency_code" value="USD">
<input type="hidden" name="lc" value="US">
<input type="hidden" name="bn" value="PP-ShopCartBF">
</form>
The problem is, I need to substitute the image's filename for the "imagename" variable in the above code. I'm looking to extract the filename, but I'm unsure of how Aperture populates that. I'm sure there's a div name that they use that I could slip in there, but has anyone who has modified a Web Theme done this before? I know CSS modifications are easy, but I'm talking extracting certain field names that Aperture uses.

I'm not seeing an "Add To Cart" button on your page - just a "View Cart" one.
The reply from PayPal is correct in that there is no code that specifies the image size. The image itself dictates the size as you will discover if you use a custom button hosted on your own site.
Here's the code:
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="Value-Code-Here">
<input type="image" src="http://www.domain.com/Folder-Name/Button-Image.png" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!">
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>
However, PayPal buttons do work on iWeb built sites so I don't know about the relevance of their reference to CSS.

Iphoto not uploading to Web Gallery - all photos "pending"

I added some more photos to my existing Web Gallery folders, plus created a new one by dragging them into the Web Gallery folders. However, they all appear as "pending" and are not appearing on the web. I've stopped / restarted Iphoto and my Macbook. I've tried removing and adding other photos to the galleries. I've moved the "com.apple.iPhoto.plist" and "com.apple.iPhoto" files to the desktop as suggested in another post. None of these have worked.

Yes, and the icons next to the web gallery names alternate between an arrow that goes round in circles, something that looks like a pie-chart / clock, and one that looks like a wireless transmission icon. Hope you know what I mean.
When I open the web gallery page nothing has changed. I even left it going overnight.

Web Gallery duplicating photos

I seem to have a consistent problem of photo duplicating themselves when I add new photos to a Web Gallery. The duplications don't show up on the actual Web gallery but are present within iPhoto, for example iPhoto says there are 96 images and the Web Gallery says 73. This problem only occurs when I add images to an existing Web Gallery and not when creating a new Web Gallery from selected images or albums. If you delete the 'dupe' all instances of the same image are deleted. Anyone else having this problem? any ideas to fix it?

My gallery/iphoto wish list is to have this solved and then to allow the gallery albums to have sub albums within them. Im talking 1600 thumbnail photos per student, 21 students!
This is a user forum and Apple does not monitor or respond here - to provide feedback/suggestions to Apple go to the iPhoto menu ==> provide iPhoto feedback
As to your duplication issue - I have no idea what you are asking
Yes my gallery looks right except I having trouble putting my lead photo on the album cover.
I think you want to change the key photo - to do this open the web gallery in iPhoto (click on it in the source pane - the left hand list) and find the photo you want as the key photo and drag it to the little thumbnail at the upper left of the window to the left of the gallery name
LN

Is it possible to incorporate old photo albums into a Web Gallery?

I created 9 photo albums with the first iteration of iWeb. Now I'm using iWeb '08 and have been consistently adding new photos to an existing Web Gallery via iPhoto. But I'd like to import or add those older albums into the Web Gallery.
Looking for answers...

Perhaps it would be better to just direct you to what I'm talking about.
Here is a URL to the site I maintain for our family photos and movies:
http://www.Derners.ws
Along the top you will see navigation links to Web Galleries, Photo Albums and Movies. The Web Galleries were created as a result of iWeb 2.0 and the overall inclusion of the Web Gallery feature with iLife '08.
The Photo Albums and Movies however, were created back in iWeb 1. These are still online as standalone pages. What my original question alludes to are these Photo Albums. I want to pull the content of the Photo Albums and incorporate it into my Web Galleries, thereby having all of it in one place. So when I complete this process a visitor who browses Derners.ws will go directly to the Web Galleries. No more "Photo Albums", no more "Movies". Just one stop for viewing everything.
Does that make sense?

Embedding Photo Gallery in an existing web page

Hello Bridge Forum Community!
I am working with a web developer and she designed a template for us to use. I want to incorporate a "web gallery" that I created using CS4 Bridge for WIndows into my existing Dreamweaver template. When I put the HTML code in the table the slideshow show up really really small. If I use the IE zoon and put it to 400% I can see it, and the controls all work - I just need it to fill out the entire space in the table without being miniscule in size. I'm beating my head against the wall to figure this out. Any help would be most appreciated! Thank You!

All that other site did was use a table layout and put the gallery within a table cell. The same effect could be done with a container div.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" name="flashmo_060_photo_gallery" width="800" height="800" align="middle" id="flashmo_060_photo_gallery">
       <param name="allowScriptAccess" value="sameDomain" />
       <param name="movie" value="flashmo_060_photo_gallery.swf" />
       <param name="quality" value="high" />
       <param name="bgcolor" value="#000000" />
       <embed src="flashmo_060_photo_gallery.swf" quality="high" bgcolor="#000000" width="800" height="800" name="flashmo_060_photo_gallery" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
   </object>
That's the only code you need to bring over from the first page to your page. Then just make sure paths are all set so that your other page can read the flash file and you should be good to go.

How To Customize Existing Web Photo Gallery?

I copied one of the existing Web Photo Galleries (Simple - Vertical Thumbnails) and have customized it. What I'm needing to change now is the Options within the Web Photo Gallery dialogue box. Under "General" I'm needing to have the "Use UTF 8 Encoding" checked, under "Large Images" I need the Resize Images: unchecked, and so forth.
Where would these setting be located?
Thanks!,
Wesley

Really, that's your answer?? In 3 seconds I saw that your results were not what I needed. Do you think that I haven't already searched for this? I'm not needing to know how to adjust current settings each time I bring up the Gallery dialogue box, I'm needing those settings to be preset when I bring up my custom gallery style.
Where are the Option presets stored?
I'm needing these presets for example:
General > Use UTF 8 Encoding and Preserver all metadata to be already checked
Large Thumbnails > Resize Images to be already unchecked
Amongst other settings.

Adding web gallery into existing website

Hi,
Does anyone know if you can add/import a lightroom created web gallery into an existing webpage? I am redoing my website (originally created with Frontpage, now considering using Expression Web) and want to create photo galleries using lightroom. I know you can create the same type of gallery using Flash, however I don't want to buy a new program when I have lightroom already. I don't have enough experience with HTML to use Dreamweaver.
Thanks!
Nancy

This previews just fine from Dreamweaver but when uploaded non
of my images load. Please see www.jakgallery.com/19701979
All I get is the circular wait icon. Thanks very much for any help you can give. It seems I am one little step away from making it work.
Mike

Embed gallery to existing web page?

I am creating a html gallery with lightroom 1.4.1, and succesfully uploaded the gallery to my webite with it's own page index.html
But I would like to embed it in a existing web page.
Is there a simpleway to do this.
Thx
Brad

I embed the slideshow into another page by using an iframe. Crude sample code follows where index.html would be the slideshow.
<html>
<head>
<title>2009 Florida Vacation</title>
</head>
<body>
<div align="center">
<iframe frameborder="0" src="index.html">This web page uses floating frames and your web browser does not support them. Maybe you should consider updating your browser to a newer one.</iframe>
<p><a href="../index.html">Home Page</a></p>
</div>
</body>
</html>

How do I to modify context value DATABASE.SID on existing web ADI sheet?

Does anybody know how to modify the connection context value (DATABASE.SID) on an existing web ADI sheet?
My original sheet was created against e.g. TESTBASE.TST1, but now I want the same sheet to work on PRD (PRDBASE.PRD).
In the old client version there was a hidden sheet where you could change this, but in web ADI there is no hidden sheet, and changing context values directly is not allowed.

Does anybody know how to modify the connection context value (DATABASE.SID) on an existing web ADI sheet?
My original sheet was created against e.g. TESTBASE.TST1, but now I want the same sheet to work on PRD (PRDBASE.PRD).
In the old client version there was a hidden sheet where you could change this, but in web ADI there is no hidden sheet, and changing context values directly is not allowed.

Modify a published web gallery?

I don't work with web galleries very often but plan to do more in the future.
I've created a web gallery in Aperture and published it to .mac. So far, so good. Now, can someone please explain the steps to making changes to it ? (add or delete an image, edit the title). Page 350 of the help manual talks about making changes. It seems so straightforward, I've got to be missing the obvious!
Also - how do I delete the web pages I no longer want? I thought I did this on my iDisk once before but now I can't figure out how to remove the old webpages.
Thanks, Dave

Dave,
After you add or delete photos from a gallery that you've already created just go ahead and click on the "publish to .mac" button. In the address box that pops up type in the name of the gallery exactly as you did when you first created it. Aperture will then ask you if you wish to update or replace the existing gallery. I've had to do it several times in the past and it works like a charm. Hope this helps.
John

LR HTML Web Gallery -- modified version with great features is available

For anyone using the default Lightroom HTML Web Gallery, one of our associates here has offered a modified version with some great added features.
John Beardsworth's site -- Lightroom Solutions - http://lightroomsolutions.com/ -- is a wonderful resource for LR tips, plug-ins, information, etc.
The default HTML gallery is fine, but I always found it lacked features. I mentioned this to Ian Lyons (http://www.computer-darkroom.com/) a couple of years ago, and he sent me a modified version with the ability to specify up to 100 rows by using sliders instead of the grid. When I tried John's modified version, it had some other good features. I thought.... what if the two modified versions could be combined? So, I shot John an email, and low and behold, he uploaded a new version of the gallery to his site. Thank you, Ian and John!
Here is the link:
http://lightroomsolutions.com/my-tweaked-built-in-html-gallery/
Here are the added features that I find most useful:
Number of rows (up to 100) and columns can be specified using sliders rather than the grid
Thumbnail images can be sized to your specification
Filename can be placed on each thumbnail, and you specify size of text
Clicking the large image advances to the next image rather than returning to the top of the thumbnail page (no need to use the 'next' link)
See the site for other added features. (If you already have John's version, the newer version has the same file name and went online April 17, 2013.)
PLEASE NOTE: John Beardsworth's HTML gallery is NOT supported by John or Adobe, and is offered "as-is."
I hope others will find this as useful and I have.
John

I've done a version of this where the large file links to the medium and it works no problem. code is based on tutorial code I've already written..
I'd need to see more code to see where the issue might be..
Here's what I have:
(I opted not to put the files in "content", also ignore margin-top, it's not relevent to this)
AddGridPages {
template='grid.html',
rows=model.nonCSS.numRows,
columns=model.nonCSS.numCols,
AddCustomCSS {
filename='resources/css/custom.css',
AddResources {
source='resources',
destination='resources',
AddPhotoPages {
template='detail.html',
variant='_large',
destination="",
AddPhotoPages {
    template='medium.html',
    variant='_medium',
    destination="",
In medium.html
<div id="detailContainer">
<div style="margin-top:<%= margintop %>px;">
<img src="bin/images/med/<%= image.exportFilename %>.jpg" alt="$image.metadata.description"/></div>
</div>
in detail.html
<div id="detailContainer">
<div style="margin-top:<%= margintop %>px;">
<a href="<%= image.exportFilename %>_medium.html"><img src="bin/images/photo/<%= image.exportFilename %>.jpg" alt="$image.metadata.description"/></a></div>
</div>

Modifying Existing Web Gallery

Similar Messages

Maybe you are looking for