Modifying many signatures at once

I have over 65 signatures set up in my Mail account. Recently I had to make a change that affected all of my signatures. I needed to replace one line in my signature with a new modified line.
Is there a way to modify all 65 of my signatures at once rather than modifying them one by one.

X-23,
I ended up having to send an 11 page fax, but it all went through just fine with the new settings. Woo hoo! It did take about a half hour to get the job done, but the result was OK, and that's awesome. Thank you so much for your input and clear instructions. You just saved me $11 and a whole lotta time. Thanks again. ;-)

Similar Messages

How do I change permissions on many files at once?

Hello!
I recently had a large hard drive crash, and, long story short, I got all my data back but now have a different user account on a new hard drive. The permissions on all the files on the computer are fine.
However, I am a recently graduated film student and use an external drive to edit video. When I tried to open up Final Cut Pro and work on a project, I was told that the program couldn't work because I didn't have "write" access to my scratch drives. I changed the permissions on the relevant folders and can now open the application fine, but can't actually edit because ALL the medi files don't give me full read/write access.
I can change them all one at a time, which requires I enter my password for each one, but this would take a few days of work to complete.
My question is: how can I add my user account with read/write permission to many files at once? I've heard this can be done with Terminal, but I'm not sure how.
Please give me step-by-step instructions if you can! I have never used Terminal before! I am not a techie, but I want to be, and I learn quickly!
My computer specs:
15in Macbook Pro, early 2008.
System 10.5.8

In the Finder's Get Info window, under permissions, you can click the little gear icon and set the "Apply to encoded items" flag. Then when you change permissions, it will apply to everything underneath the selected folder.

No longer got internet connection. help, tryed to down load to many Apps at once, ipad froze. dealeted Apps, no longer got internet connection. help

help, tryed to down load to many Apps at once, ipad froze. dealeted Apps, no longer got internet connection. help

What's your problem is 1) your ipad froze or 2) you now have no internet connection?
Have you restarted/reset your device?
http://support.apple.com/kb/HT1430
https://discussions.apple.com/message/19521062#19521062

Has Lightroom CC removed the ability to Batch apply changes to many files at once (after import) using presets?

I've just upgraded to Lightroom CC and most of the changes are very welcome - especially the performance improvements.
However I've been processing several thousand images and in Lightroom 5 when wanting to apply changes to many images at once it was as simple as selecting the group of images and then right clicking, selecting Develop Settings and then selecting one of my many Presets from a sub menu.
This sub menu seems to have disappeared in Lightroom CC.
This is a MASSIVE problem for me as I cannot work out how to apply the presets to multiple images anymore.   I note that there is a tutorial on how to do it during import - but I want to specifically be able to do it post import, during development of large groups of images for clients.
Anyone know what has happened here and how we can get access to applying presets to multiple images during development under Lightroom CC?

Yes ssprengel.
I regularly work with all the Presets visible in the left of the Develop module.   But this cannot be used to apply the preset to multiple images.   For that (in Lightroom 5) you had to select the multiple images and then right click (on any one of the images) then go down the menu to Develop Settings, then select the Preset Folder and the Preset you wished to apply to all the images selected.   This worked well for me in my workflow.   But the access to the Presets through the Develop Settings menu has been removed in Lightroom CC.   ManiacJoe's solution above works - but it's accessed from the Library module.   That's kind of counter intuitive.   I want access to apply any preset I've saved to multiple images (in many cases t's being applied to thousands of images) from within the Develop module.   it makes little sense to apply a preset one image at a time to thousands of images when developing them
The whole idea behind presets was that they could be quickly and consistently applied across multiple images.   Removing this functionality is a backward step by ADOBE in my opinion and I really want them to add it back to the Develop Module menu systems.

Export of many Baselines at once

Hello guys,
i want to export many Baselines from one repository user to other one. Is there a possibility to use the commandline for this job? How? Or is there an other possibility to export many BASELINES at once?
I use DB 9.2.0.7 withs OEM 9.2.0
thanks for response

Hi,
There is no other way, you have to save it one by one manually.
Regards,
Kams

LK6.5 Modbus read/write to many addresses at once

LK6.5 Modbus read/write to many addresses at once. What happens as example; I have address 100 to 150 and 180-200. Addresses in between doesn't exist. Not all are connected. The modbus (Ethernet master) driver reads in a single command (in order to optimize) address 100-190.
That is a nice feature, but the result is a reply like "not existing" because between 150-180 are not existing. No error is shown in lookout (communication works OK).
I know I can do a workaround by setting maximum value per message to 1 or 2, but the project has 140 modbus objects with a total of around 4000 connections. I would like to use a big range in one command, but no addresses that are not existing. Beside of that, it looks like this is a problem that let the driver and/or lookout crash.
Any one knows a fast solution? Is there another updated modbus driver?

more inputs:
The response from Modbus device actually doesn't specify which address has the problem if you read a range.
When you read a range, and a certain address in this range doesn't exist, do you get no data in lookout?
It depends on the Modbus device whether lookout gets error response or the good response. I don't see detailed definition in the Modbus specification. So, if a certain address in a range doesn't exist, the device may either return error or good response. But the problem is that the error reponse is just an error code. Lookout doesn't know which address has the problem. It may be a problem that you don't see alarm in Lookout.
I don't see a way on lookout side to get a better behaviour. Maybe you can consult the device provider for any advice, such as what should the modbus master do, is the range read expected?
Ryan Shi
National Instruments

Improvement: Delete many messages in once time

WHy aren't we able to remove many messages in once time. The only way we can do on latest iOS is to Delete one by one, it takes much time to do for all conversasion that we want to swipe out!!

Good question, but since this forum is user to user, I'm sure no one knows what Apple designs things exactly this certain way, so good luck getting an answer
Apple's feedback website may help you voice your concerns: http://www.apple.com/feedback/

Export / save many workbooks at once on local disk

Hello Experts,
we are working with BI 3.5 . My client wishes to save many workbooks of one role at once on his local disk.
He doesn't want to open every single workbook in the BExAnalyzer and save it on the local disk.
Is there a report or a transaction or something else to save many workbooks at once?
Thanks for your help.
Regards
Frederike

Hi,
There is no other way, you have to save it one by one manually.
Regards,
Kams

ORA-00604 & ORA-30512 CANNOT MODIFY TABLE MORE THAN ONCE IN A TRANSACTION

We have a requirement where two tables should be in sync at any given point
in time with respect to the structure of the tables.
Any change on table/column via ALTER (MODIFY, ADD, RENAME COLUMN, DROP
COLUMN) on the parent table should be replicated to the replica table.
I created a DDL_TRIGGER on the schema and the desired result is achieved but
for the following one scenario for which its failing.
The issue is, if we try to reduce the width of the column (via ALTER ..
MODIFY) it fails with the following error
ORA-00604: error occurred at recursive SQL level 1
ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
transaction
Please follow the steps to reproduce the issue (the issue is across the DB
version checked on 10.2, 11.1 and 11.2 DB version)
-- Step1 Create Parent Table
CREATE TABLE abc (col1 VARCHAR2(10))
-- Step2 Create Replica Table
CREATE TABLE replica_abc (col1 VARCHAR2(10))
-- Step3 Create DDL Trigger
CREATE OR REPLACE TRIGGER ddl_trigger
AFTER ALTER ON SCHEMA
DECLARE
operation VARCHAR2(30);
object_name VARCHAR2(30);
l_sqltext VARCHAR2(100);
i PLS_INTEGER;
l_count NUMBER:=0;
sql_text dbms_standard.ora_name_list_t;
BEGIN
i := dbms_standard.sql_txt(sql_text);
SELECT ora_sysevent, ora_dict_obj_name, UPPER(sql_text(i))
INTO operation, object_name, l_sqltext
FROM dual;
IF ora_dict_obj_name = 'ABC' THEN
l_count := INSTR(l_sqltext,'ADD CONSTRAINT',1,1);
l_count := l_count + INSTR(l_sqltext,'DISABLE',1,1);
l_count := l_count + INSTR(l_sqltext,'DROP CONSTRAINT',1,1);
l_count := l_count + INSTR(l_sqltext,'PRIMARY KEY',1,1);
l_count := l_count + INSTR(l_sqltext,'ADD CHECK',1,1);
IF (l_count = 0) THEN
l_count := INSTR(l_sqltext,'ADD',1,1);
l_count := l_count + INSTR(l_sqltext,'MODIFY',1,1);
l_count := l_count + INSTR(l_sqltext,'DROP COLUMN',1,1);
l_count := l_count + INSTR(l_sqltext,'RENAME
COLUMN',1,1);
IF (l_count >0) THEN
l_sqltext := REPLACE(l_sqltext,'TABLE ABC','TABLE REPLICA_ABC');
execute immediate l_sqltext;
END IF;
END IF;
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE ;
END;
-- Step 4 Issue the following ALTER command on the Parent table 'ABC'
ALTER TABLE ABC MODIFY COL1 VARCHAR2(9);
will show the following
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
transaction
ORA-06512: at line 34
whereas the following commands works fine
ALTER TABLE ABC MODIFY COL1 VARCHAR2(11);
and also the rest of the operations
ALTER TABLE ABC ADD COL2 VARCHAR2(20);
ALTER TABLE ABC RENAME COLUMN COL2 TO COL3;
ALTER TABLE ABC DROP COLUMN COL3;
The issue is while reducing the size of VARCHAR2 columns, while the rest of
option works fine.
Any suggestion or workaround please.

It looks like a bug to me. The failing statement from the SQL trace is
PARSE ERROR #12:len=77 dep=3 uid=0 oct=3 lid=0 tim=1263332549608656 err=30512
select /*+ first_rows */ 1 from "TIM"."REPLICA_ABC" where LENGTHB("COL1") > 9and exception cannot explain it.

How to switch off 'crop' edit in many images at once?

I know how to lift and stamp to apply edits to several selected images at once. However, if I have cropped many images within a project in different ways, then want to switch off the crop on all of them, is there a way? Without laboriously going through one-by-one and un-checking the 'crop' box?
Likewise is it possible to apply auto-exposure to many images (batch process)? When stamping, it applies the exact same exposure change from the lifted version, but different images require different exposure compensations of course.

1 - yes, on one image leave the crop box checked and click the circular arrow (reset) ... this has the crop enabled but no crop ... then L&S that adjustment to all the ones you want, you just reset the crop on all of them ...
2 - no ... with the auto adjustment it creates an adjustment ... when you L&S that adjustment, that is what you get, that specific adjustment ... you are one of hundreds that want that and ask for it here ... use the feedback menu option to send feedback to dev team ... or use http://www.apple.com/feedback/aperture.html

Few Questions About Migrating Site & Editing Many Pages at Once

OK. First things first. My manager doesn't want me listing
our company name in this post since we are currently trying to get
out of our hosting contract and she doesn't want to jeapordize
anything in case someone stumbled across the post by a search or
anything. FYI: I have Dreamweaver CS3.
So here's the deal. My company would like to move our site
away from this proprietary WYSIWYG online editor we have. The
current setup locks us into to this silly online editor for our
site and doesn't allow access to our files on their server. This
means that if I want to simply change the file name of a picture on
our site, I have to log in to their editor and go through about ten
stupid steps. The problem is, the site is dynamically generated.
Every page on the site looks something like this at the end:
default.aspx?pageid=9. Those links are permanently attached to
specific pages and the content on the individual pages rarely
changes. I tried using some offline downloaders to grab every page
of our site in case we move it elsewhere. When these pages are
downloaded, though, the file names change and it breaks all of the
links.
If I go into the code and change every individual link to
other pages and style sheets I can get it to look good.
So my first question is: is there a way to easily allow
Dreamweaver to import a couple hundred dynamically generated pages
and make them into static pages so that they just look like
"xyz.com/products.html"? Fortunately, our site is not extremely
large (maybe 250+ pages) so in an absolute worst case scenario I
could post a lot of the pages by hand.
My second question regards changing specific items across many
pages. Our current site contains the ability to place little
widgets into pages. This means that if we want a navigation bar on
a hundred different pages, we just edit the one entry for the
widget and every page changes. I'm sure this is possible in DW, but
I spent an hour trying to search online yesterday trying to find
info and didn't answer my question. Is this what templates are for?
I saw people mentioning Find All, but this didn't seem like a
perfect solution. I apologize if this is a very stupid question. No
one needs to take the time to explain the exact process to me, but
if someone could just tell me the name of the functionality and if
they know a specific resource to learn more about it, that would be
wonderful.
Whatever this functionality is, would I have to start over from
scratch with the pages? Or could I implement it with the current
site that's already put together? I'd be happy to convert the
site to static HTML if there's an easy way to change multiple pages
at once other than Find All and Replace.
Thank you so, so much for any help. I appreciate it. I just
want to make sure these things are possible before we start the
ball rolling down that path.

I think I could answer your questions with just one answer so
here it goes.
What you need to do when making this type of mass move from
an online editor to DW would be to first download a copy of
everything you have just so you have a backup in case any mistakes
are made.
Next with the downloading of the files. You will need to log
in via FTP in Dreamweaver or via your file manager on the control
panel of your website. If you are unsure of where this is or how to
log in via FTP, you may need to contact your host for the login
information. Even though the files appear to be dynamic I do
believe that most editors would just store the pages separately and
just uses includes to make that work. However, if this is not how
it appears, post back with the name of the editor that you were
using.
Next, take one of the files you have. Based on the
description you are giving me it sounds as if they all look the
same just with different content (nav bar aside). If this is the
case you can create a template file in Dreamweaver. Within that
template you should place the content that is the same for all of
your pages. Then make one editable region for your content to go
into. These links can be found from the main toolbar for creating
editable regions and other template functions (which I believe
includes the navbar).
Also one thing to note with templates is that they will
automatically fix links on the pages when you save the template to
include new files via links. So you don't have to worry about
updating all of the pages all of the time. The only thing you would
need to update the individual pages for would be for the content on
those pages.
Hopefully this will get you started in the right direction.
But as I said in the beginning if you have trouble getting the
files off of the site post a bit more information about what you
have and hopefully someone here will be able to point you in the
right direction.

Change Capitalization For Many Cells at Once

How can I change the captialization for many table cells at once. I can do it for one cell at a time by triple-clicking an choosing the capitalization menu within fonts, but if I select all the cells I want to change and then go to fonts>capitalization, the capitalization menu is dimmed.
thanks,
Jeff

I'm a little confused by this thread. As Badunit describes, can't you just select multiple cells and make a menu pick?
No need for formulas, right? (unless it's a special situation of capitalizing the start of each sentence)
SG

Hi Everyone, how do you make adjustments to many pics at once

Hi Everyone, how do you make the same adjustment to many pics in one go? Tried select All, and then adjust, but that only does the original selected pic..

First of all, make sure, tat the "Primary only" flag is not enabled. (Edit menu > Primary only).
Then rotate, clip, keywords will be applied to all selected image versions.
Only the adjustments applied from the Adjustment panel will still only be applied to the primary selection. But you can use the "Lift&Stamp" tool to transfer all adjustments from an edited image to all selected images at once.
The "Lift&Stamp" tool to the left, the "primary Only" button to the right.
Keywords or ratings are applied only to one of the selected images - why?

Can you redo or undo your signature properties once its' created?

Ok, I am currently filling out a form for an important business convention in a couple of weeks. The first problem occurred when the fill and sign property would not let me sign like I normally do. So it gave me the option of creating a signature. So I chose that option; but once it was done, I saw how my signature appeared on the form and tried to adjust and change it. It would not let me because of the signature properties and validation certificate. So now I'm like I can't turn this in to my supervisor with the signature? My PC is operating Windows 7; I've never had any trouble out of it. I just want to know if you create a signature can it's certificate be revoked or undone or something?

Test Screen Name is right. Signature appearance (what you see in PDF file in the place where signature was applied) is a part of the signed content and cannot be changed after the signature is created.
As to your question "[when] you create a signature can it's certificate be revoked or undone or something?", the signature appearance is not related to the certificate that you used to create the signature. Those are two separate things. Certificate is used to create a signature. Signature appearance shows some image/info in the place where signature was applied. You can create custom signature appearance in Acrobat but you need to do that before you sign using this appearance.
Whether a certificate can be revoked, it depends on the type of the certificate. If you created a certificate yourself, so-called "self-signed" certificate, then there is no mechanism for its revocation. If you procured it from a reputable CA (Certificate Authority) then CA has a revocation mechanism. The question is why would you want to revoke your certificate? Usually you do that when someone got hold of your certificate and you do not want someone else to sign documents pretending that they are you. Certificate revocation has no relation to signature appearance.

Modifying a word document once converted FROM PDF

I am able to successfully convert a document to word from PDF after using ExportPDF. I can open it and everything looks fine but I am unamble to modify. Meaning, I need to complete the document electronically and I am unable to do so. I am not that technical so I just need basic instruction.
Thanks

Hello David, thank you for the reply, it is a nice suggestion you gave. I should ask the question from Microsoft, they must have the answer. I have one more question. I would be very nice if you could help me with that too. Here is the link:
http://forums.adobe.com/message/4748430#4748430
Thanks once again.

Modifying many signatures at once

Similar Messages

Maybe you are looking for