Modifying standard script

helo experts i modified standard script medruck into some zscript and i made some changes but its not showing the changes in the print preview why?and whats is the ME9F can any one explain the steps for modifying a standard sap script as per the requirements?or if u show any link it will be helpful...

Hi,
You need to go to transaction NACE and replace standard SAPScript with your custom SAPScript.
Path: NACE -> Select EF (Application) -> Click Output Types button -> Select NEU (if you use standard one) -> Double click on Processing Routine -> Click Change mode -> Replace Medruck with your custom SAPScript -> Save.
ME9F is the standard program to create PO message output. In your case, perhaps it can be used to generate and/or print SAPScript.
Regards,
Ferry Lianto

Similar Messages

SAP Standard Scripts ( how to Modify Standard Scripts)

hi every one , This is Abdul Rahman , i want to know how i should modify Standard SAP Scripts like RVORDER01 or MEDRUCK SCRIPTS ,i want to know whole process . and how to Run the Script . plz any kindly send some good DOC or web pages which i can acess
thankyou
Abdul Rahman

Hi,
Modifying SAP Forms
If you want to modify SAP forms, set up your development environment as follows:
Make sure that no SAP-standard forms are stored as client-specific copies in your development client.
Such forms should be held only in client 000, the SAP development and installation client. If you access an SAP-standard form from another client, then the central copy in client 000 is used.
If you need to remove SAP-standard objects from your development client, see Notes 10388 and 3355 in the SAP Online Service System (OSS). These notes explain the procedure for saving modified forms and then deleting all forms.
To modify SAP standard forms,
Copy the forms you need from client 000 to your development client.
Rename the forms using a name from the customer name reserve (names starting with Y or Z).
Copy the forms to one of your own Y or Z development classes.
Renaming the SAP standard object makes it possible to manage and transport your changes with the SAP workbench organizer. The organizer is not activated for SAP-standard objects that are modified in clients other than 000.
To put your modifications into effect, you must also modify the ABAP print program used to print documents that use this form. You should rename such print programs and store them in your own Y or Z development classes.
You can use the SAP Customizing System to replace the SAP print program with your modified print program in the affected applications.
Forms: Concepts
Forms are used to control the page layout and also the text formatting in your documents. Before formatting a document for output to the screen or to a printer, you must assign a form to it. If you do not specify a form for a document, then the SYSTEM form is assigned to the document by default.
Application-specific forms are used in SAP applications to specify the page layout for such special documents as invoice or checks. These forms specify the structure of the information on the page(s) of such a document. They define, for example, the address header, item lines, the footer, and so on.
There are two ways to format texts with forms:
In the standard SAPscript text processing (Tools ® Word processing ® Standard text), you can select a form for a document. You can then type text into the main window of the form and output the document in the format defined in the form.
For example, you can select a form for a letter. You can then type the body text of the letter in the main window. When you print the letter, the default text elements in the other windows of the form (heading, footer, and so on) are printed with the body text.
A document can be generated by a print program in one of the SAP applications. The print program uses a form to generate the document. Most correspondence and document generation in the SAP System are handled by way of print programs.
A print program selects the text elements that are to be printed in the windows of a form. It may also collect information from the user or ask the user to input text directly, as in some correspondence functions. The print program may also provide data for variables defined in the form.
Finally, the print program uses the form to format the document for display or printing.
Check this link...
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/802d7d454211d189710000e8322d00/frameset.htm
Thanks and Regards,
Bharat Kumar Reddy.V

Modifying standard script - RVORDER01

Hi All,
Here is my requirement to change in the standard form - RVORDER01.
1.Fetch Telephone and Fax number for Sold-to and Ship-to Party from KNA1 and display in the form.
Kindly help me. Thanks in advance.
With Regards
Vasu

Vasu,
For making changes in standard you may need to copy RVORDER01 into a custom one ie ZRVORDER01 and then you may need to make changes.
In the new form you may need to make changes to ADDRESS window and INFO1. In the print program you may need to make available the telephone number and fax.
rgds,
TM.
Please mark points if helpful.

Modifications in sap-standard script

Hi,Can anybody tell me what do we do generally in modifying standard scripts,do we need to change the driver program ?
thanxs in advance.
anil.

If you are talking about output programs and SAPscripts, the idea is the following:
You make copy of the standard output program and also make copy of the sapscript. Then you perform your changes. The functional team needs to get involved to create a new output type, exa ZNEU for PO output as a copy of NEU. Then assign the new program and script.
Good Luck,
Leonardo De Araujo

Process to modifi the standard script

Hiiiiiiiii
can any body tell the complet process to modify standard script for eg for PURCHASE ORDER

Run the transaction scc1 and give the form name you want to copy and giev the client name you want to copy from , give the target name . and select the first check box if you want it copy in original language else select the second chewck box if you want to copy in all languages that source form has.
the same you will get in the SE71 transaction by choosing trhe path
UTULITIES---> Copy from client
Reward if useful
Regards,
Nageswar

How to modify the standard script in scripts?

how to modify the standard script in scripts?

Nagaraju,
Standard scripts cant be modified.
Only thing is you need to copy it to z-form and have to do modifications as per ur requirements.
Here is the procedure to copy standard form to z-form.
goto SE71 t-code, then select the menu path : Utilities -> Copy from Client
then it will take to another screen, give the form name as Standard form name, if u r copying a stadard invoice means, type RVINVOICE01 and target form, ZRVINVOICE01. Now press execute button, it will copy the form into 25 languages. Now come back to se71, enter Z-form name and do the required changes.
Hope this hint may help you, Pls close the thread if u met with correct answer.
Regards,
Sujatha.

How can I modify this script to return only certain rows of my mySQL table?

Hi there,
I have a php script that accesses a mySQL database and it was generated out of the Flex Builder wizard automatically. The script works great and there are no problems with it. It allows me to perform CRUD on a table by calling it from my Flex app. and it retrieves all the data and puts it into a nice MXML format.
My question, currently when I call "findAll" to retrieve all the data in the table, well, it retrieves ALL the rows in the table. That's fine, but my table is starting to grow really large with thousands of rows.
I want to modify this script so that I can pass a variable into it from Flex so that it only retrieves the rows that match the "$subscriber_id" variable that I pass. In this way the results are not the entire table's data, only the rows that match 'subscriber_id'.
I know how to pass a variable from Flex into php and the code on the php side to pick it up would look like this:
$subscriberID = $_POST['subscriberID'];
Can anyone shed light as to the proper code modification in "findAll" which will take my $subscriberID variable and compare it to the 'subscriber_id' field and then only return those rows that match? I think it has something to do with lines 98 to 101.
Any help is appreciated.
<?php
require_once(dirname(__FILE__) . "/2257safeDBconn.php");
require_once(dirname(__FILE__) . "/functions.inc.php");
require_once(dirname(__FILE__) . "/XmlSerializer.class.php");
* This is the main PHP file that process the HTTP parameters,
* performs the basic db operations (FIND, INSERT, UPDATE, DELETE)
* and then serialize the response in an XML format.
* XmlSerializer uses a PEAR xml parser to generate an xml response.
* this takes a php array and generates an xml according to the following rules:
* - the root tag name is called "response"
* - if the current value is a hash, generate a tagname with the key value, recurse inside
* - if the current value is an array, generated tags with the default value "row"
* for example, we have the following array:
* $arr = array(
* "data" => array(
* array("id_pol" => 1, "name_pol" => "name 1"),
* array("id_pol" => 2, "name_pol" => "name 2")
* "metadata" => array(
* "pageNum" => 1,
* "totalRows" => 345
* we will get an xml of the following form
* <?xml version="1.0" encoding="ISO-8859-1"?>
* <response>
* <data>
* <row>
* <id_pol>1</id_pol>
* <name_pol>name 1</name_pol>
* </row>
* <row>
* <id_pol>2</id_pol>
* <name_pol>name 2</name_pol>
* </row>
* </data>
* <metadata>
* <totalRows>345</totalRows>
* <pageNum>1</pageNum>
* </metadata>
* </response>
* Please notice that the generated server side code does not have any
* specific authentication mechanism in place.
* The filter field. This is the only field that we will do filtering after.
$filter_field = "subscriber_id";
* we need to escape the value, so we need to know what it is
* possible values: text, long, int, double, date, defined
$filter_type = "text";
* constructs and executes a sql select query against the selected database
* can take the following parameters:
* $_REQUEST["orderField"] - the field by which we do the ordering. MUST appear inside $fields.
* $_REQUEST["orderValue"] - ASC or DESC. If neither, the default value is ASC
* $_REQUEST["filter"] - the filter value
* $_REQUEST["pageNum"] - the page index
* $_REQUEST["pageSize"] - the page size (number of rows to return)
* if neither pageNum and pageSize appear, we do a full select, no limit
* returns : an array of the form
* array (
* data => array(
* array('field1' => "value1", "field2" => "value2")
* metadata => array(
* "pageNum" => page_index,
* "totalRows" => number_of_rows
function findAll() {
 global $conn, $filter_field, $filter_type;
 * the list of fields in the table. We need this to check that the sent value for the ordering is indeed correct.
 $fields = array('id','subscriber_id','lastName','firstName','birthdate','gender');
 $where = "";
 if (@$_REQUEST['filter'] != "") {
 $where = "WHERE " . $filter_field . " LIKE " . GetSQLValueStringForSelect(@$_REQUEST["filter"], $filter_type);
 $order = "";
 if (@$_REQUEST["orderField"] != "" && in_array(@$_REQUEST["orderField"], $fields)) {
 $order = "ORDER BY " . @$_REQUEST["orderField"] . " " . (in_array(@$_REQUEST["orderDirection"], array("ASC", "DESC")) ? @$_REQUEST["orderDirection"] : "ASC");
 //calculate the number of rows in this table
 $rscount = mysql_query("SELECT count(*) AS cnt FROM `modelName` $where");
 $row_rscount = mysql_fetch_assoc($rscount);
 $totalrows = (int) $row_rscount["cnt"];
 //get the page number, and the page size
 $pageNum = (int)@$_REQUEST["pageNum"];
 $pageSize = (int)@$_REQUEST["pageSize"];
 //calculate the start row for the limit clause
 $start = $pageNum * $pageSize;
 //construct the query, using the where and order condition
 $query_recordset = "SELECT id,subscriber_id,lastName,firstName,birthdate,gender FROM `modelName` $where $order";
 //if we use pagination, add the limit clause
 if ($pageNum >= 0 && $pageSize > 0) {
 $query_recordset = sprintf("%s LIMIT %d, %d", $query_recordset, $start, $pageSize);
 $recordset = mysql_query($query_recordset, $conn);
 //if we have rows in the table, loop through them and fill the array
 $toret = array();
 while ($row_recordset = mysql_fetch_assoc($recordset)) {
 array_push($toret, $row_recordset);
 //create the standard response structure
 $toret = array(
 "data" => $toret,
 "metadata" => array (
 "totalRows" => $totalrows,
 "pageNum" => $pageNum
 return $toret;
* constructs and executes a sql count query against the selected database
* can take the following parameters:
* $_REQUEST["filter"] - the filter value
* returns : an array of the form
* array (
* data => number_of_rows,
* metadata => array()
function rowCount() {
 global $conn, $filter_field, $filter_type;
 $where = "";
 if (@$_REQUEST['filter'] != "") {
 $where = "WHERE " . $filter_field . " LIKE " . GetSQLValueStringForSelect(@$_REQUEST["filter"], $filter_type);
 //calculate the number of rows in this table
 $rscount = mysql_query("SELECT count(*) AS cnt FROM `modelName` $where");
 $row_rscount = mysql_fetch_assoc($rscount);
 $totalrows = (int) $row_rscount["cnt"];
 //create the standard response structure
 $toret = array(
 "data" => $totalrows,
 "metadata" => array()
 return $toret;

Hi there,
I have a php script that accesses a mySQL database and it was generated out of the Flex Builder wizard automatically. The script works great and there are no problems with it. It allows me to perform CRUD on a table by calling it from my Flex app. and it retrieves all the data and puts it into a nice MXML format.
My question, currently when I call "findAll" to retrieve all the data in the table, well, it retrieves ALL the rows in the table. That's fine, but my table is starting to grow really large with thousands of rows.
I want to modify this script so that I can pass a variable into it from Flex so that it only retrieves the rows that match the "$subscriber_id" variable that I pass. In this way the results are not the entire table's data, only the rows that match 'subscriber_id'.
I know how to pass a variable from Flex into php and the code on the php side to pick it up would look like this:
$subscriberID = $_POST['subscriberID'];
Can anyone shed light as to the proper code modification in "findAll" which will take my $subscriberID variable and compare it to the 'subscriber_id' field and then only return those rows that match? I think it has something to do with lines 98 to 101.
Any help is appreciated.
<?php
require_once(dirname(__FILE__) . "/2257safeDBconn.php");
require_once(dirname(__FILE__) . "/functions.inc.php");
require_once(dirname(__FILE__) . "/XmlSerializer.class.php");
* This is the main PHP file that process the HTTP parameters,
* performs the basic db operations (FIND, INSERT, UPDATE, DELETE)
* and then serialize the response in an XML format.
* XmlSerializer uses a PEAR xml parser to generate an xml response.
* this takes a php array and generates an xml according to the following rules:
* - the root tag name is called "response"
* - if the current value is a hash, generate a tagname with the key value, recurse inside
* - if the current value is an array, generated tags with the default value "row"
* for example, we have the following array:
* $arr = array(
* "data" => array(
* array("id_pol" => 1, "name_pol" => "name 1"),
* array("id_pol" => 2, "name_pol" => "name 2")
* "metadata" => array(
* "pageNum" => 1,
* "totalRows" => 345
* we will get an xml of the following form
* <?xml version="1.0" encoding="ISO-8859-1"?>
* <response>
* <data>
* <row>
* <id_pol>1</id_pol>
* <name_pol>name 1</name_pol>
* </row>
* <row>
* <id_pol>2</id_pol>
* <name_pol>name 2</name_pol>
* </row>
* </data>
* <metadata>
* <totalRows>345</totalRows>
* <pageNum>1</pageNum>
* </metadata>
* </response>
* Please notice that the generated server side code does not have any
* specific authentication mechanism in place.
* The filter field. This is the only field that we will do filtering after.
$filter_field = "subscriber_id";
* we need to escape the value, so we need to know what it is
* possible values: text, long, int, double, date, defined
$filter_type = "text";
* constructs and executes a sql select query against the selected database
* can take the following parameters:
* $_REQUEST["orderField"] - the field by which we do the ordering. MUST appear inside $fields.
* $_REQUEST["orderValue"] - ASC or DESC. If neither, the default value is ASC
* $_REQUEST["filter"] - the filter value
* $_REQUEST["pageNum"] - the page index
* $_REQUEST["pageSize"] - the page size (number of rows to return)
* if neither pageNum and pageSize appear, we do a full select, no limit
* returns : an array of the form
* array (
* data => array(
* array('field1' => "value1", "field2" => "value2")
* metadata => array(
* "pageNum" => page_index,
* "totalRows" => number_of_rows
function findAll() {
 global $conn, $filter_field, $filter_type;
 * the list of fields in the table. We need this to check that the sent value for the ordering is indeed correct.
 $fields = array('id','subscriber_id','lastName','firstName','birthdate','gender');
 $where = "";
 if (@$_REQUEST['filter'] != "") {
 $where = "WHERE " . $filter_field . " LIKE " . GetSQLValueStringForSelect(@$_REQUEST["filter"], $filter_type);
 $order = "";
 if (@$_REQUEST["orderField"] != "" && in_array(@$_REQUEST["orderField"], $fields)) {
 $order = "ORDER BY " . @$_REQUEST["orderField"] . " " . (in_array(@$_REQUEST["orderDirection"], array("ASC", "DESC")) ? @$_REQUEST["orderDirection"] : "ASC");
 //calculate the number of rows in this table
 $rscount = mysql_query("SELECT count(*) AS cnt FROM `modelName` $where");
 $row_rscount = mysql_fetch_assoc($rscount);
 $totalrows = (int) $row_rscount["cnt"];
 //get the page number, and the page size
 $pageNum = (int)@$_REQUEST["pageNum"];
 $pageSize = (int)@$_REQUEST["pageSize"];
 //calculate the start row for the limit clause
 $start = $pageNum * $pageSize;
 //construct the query, using the where and order condition
 $query_recordset = "SELECT id,subscriber_id,lastName,firstName,birthdate,gender FROM `modelName` $where $order";
 //if we use pagination, add the limit clause
 if ($pageNum >= 0 && $pageSize > 0) {
 $query_recordset = sprintf("%s LIMIT %d, %d", $query_recordset, $start, $pageSize);
 $recordset = mysql_query($query_recordset, $conn);
 //if we have rows in the table, loop through them and fill the array
 $toret = array();
 while ($row_recordset = mysql_fetch_assoc($recordset)) {
 array_push($toret, $row_recordset);
 //create the standard response structure
 $toret = array(
 "data" => $toret,
 "metadata" => array (
 "totalRows" => $totalrows,
 "pageNum" => $pageNum
 return $toret;
* constructs and executes a sql count query against the selected database
* can take the following parameters:
* $_REQUEST["filter"] - the filter value
* returns : an array of the form
* array (
* data => number_of_rows,
* metadata => array()
function rowCount() {
 global $conn, $filter_field, $filter_type;
 $where = "";
 if (@$_REQUEST['filter'] != "") {
 $where = "WHERE " . $filter_field . " LIKE " . GetSQLValueStringForSelect(@$_REQUEST["filter"], $filter_type);
 //calculate the number of rows in this table
 $rscount = mysql_query("SELECT count(*) AS cnt FROM `modelName` $where");
 $row_rscount = mysql_fetch_assoc($rscount);
 $totalrows = (int) $row_rscount["cnt"];
 //create the standard response structure
 $toret = array(
 "data" => $totalrows,
 "metadata" => array()
 return $toret;

Problem in Sapscript , After creating a copy of Standard Script

Hello friends,
                   I have copied a standard script WASCHEIN into ZWASCHEIN, now all the data is coming from driver program SAPM07DR. Now there is one field which is not coming from the standard program,
                  Is there any way i can capture the field in my script without making changes in the standard driver program like a select statement in the script.
Thanks.
Edited by: Vijay Babu Dudla on Dec 16, 2008 3:24 AM

Hello Poonam,
Sorry i think you are not aware of using PERFORM stmts in SAPScripts !!!
@ Amit you can try this bit of coding:
/:           PERFORM F_GET_KTEXT IN PROGRAM ZPROGRAM
/:           USING &MSEG-NPLNR&
/:           CHANGING &V_KTEXT&
/:           ENDPERFORM
Create a Subroutine-Pool Program: ZPROGRAM where you write the FORM for the above PERFORM.
FORM f_get_cust_details
TABLES fp_it_input STRUCTURE itcsy
              fp_it_output STRUCTURE itcsy.
DATA:
l_v_nplnr TYPE nplnr,
l_v_ktext TYPE auftext.
READ TABLE fp_it_input WITH KEY name = 'MSEG-NPLNR'.
IF sy-subrc = 0.
    l_v_nplnr = fp_it_input-value.
ENDIF.
SELECT SINGLE KTEXT
INTO l_v_ktext
FROM aufk
WHERE aufnr = l_v_nplnr.
LOOP AT fp_it_output.                                     "#EC *
    IF fp_it_output-name EQ 'V_KTEXT'.
*     Modifying the output table with the customer number
      fp_it_output-value = l_v_nplnr.
      MODIFY fp_it_output.
ENDLOOP.
ENDFORM.
Please note that passing the USING / CHANGING parameters through tables of ITCSY structures is a standard way of doing this & you cannot change this )
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Dec 16, 2008 9:39 AM

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me How to modify a script without changing the print programme
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

Modifying Sap Scripts - F130_CONFIRM_01

hi..
i am modifying standard sap script formname is F130_CONFIRM_01.
i had done all changes.. i dont want to display the address except first page.
can any one help me out.
thanks in advance.
awaiting for ur reply..

Hi,
Use
IF&PAGE& EQ 1.
print address
endif.
thnx
Rahul

Changing Standard Scripts

Hi,
Can anyone tell how to change the standard scripts?
pls give steps to change.
thanks

First go to SE71, then give a Name for the Z-form and copy the predefined form from UTILITES -> COPY FROM CLIENT.
Then open the coiped Z-form and save and activate.
This is the procedure for copying a predeifned form.
go to SE71 T code
enter the std script, display
from the second page Copy the script to the ZSCRIPT with EN as lang
and do the modifications in that Zscript and that has to be attached in the NACE t code for the related Output type and Driver program.
for example
for PO MEDRUCK is the std Script Copy it to ZMEDRUCK and do the changes.
then in NACE select the output type NEU and attache it to SAPFM05P program and remove the MEDRUCK and keep ZMEDRUCK.
Modifying SAP Forms
If you want to modify SAP forms, set up your development environment as follows:
Make sure that no SAP-standard forms are stored as client-specific copies in your development client.
Such forms should be held only in client 000, the SAP development and installation client. If you access an SAP-standard form from another client, then the central copy in client 000 is used.
If you need to remove SAP-standard objects from your development client, see Notes 10388 and 3355 in the SAP Online Service System (OSS). These notes explain the procedure for saving modified forms and then deleting all forms.
To modify SAP standard forms,
Copy the forms you need from client 000 to your development client.
Rename the forms using a name from the customer name reserve (names starting with Y or Z).
Copy the forms to one of your own Y or Z development classes.
Renaming the SAP standard object makes it possible to manage and transport your changes with the SAP workbench organizer. The organizer is not activated for SAP-standard objects that are modified in clients other than 000.
To put your modifications into effect, you must also modify the ABAP print program used to print documents that use this form. You should rename such print programs and store them in your own Y or Z development classes.
You can use the SAP Customizing System to replace the SAP print program with your modified print program in the affected applications.
Forms: Concepts
Forms are used to control the page layout and also the text formatting in your documents. Before formatting a document for output to the screen or to a printer, you must assign a form to it. If you do not specify a form for a document, then the SYSTEM form is assigned to the document by default.
Application-specific forms are used in SAP applications to specify the page layout for such special documents as invoice or checks. These forms specify the structure of the information on the page(s) of such a document. They define, for example, the address header, item lines, the footer, and so on.
There are two ways to format texts with forms:
In the standard SAPscript text processing (Tools ® Word processing ® Standard text), you can select a form for a document. You can then type text into the main window of the form and output the document in the format defined in the form.
For example, you can select a form for a letter. You can then type the body text of the letter in the main window. When you print the letter, the default text elements in the other windows of the form (heading, footer, and so on) are printed with the body text.
A document can be generated by a print program in one of the SAP applications. The print program uses a form to generate the document. Most correspondence and document generation in the SAP System are handled by way of print programs.
A print program selects the text elements that are to be printed in the windows of a form. It may also collect information from the user or ask the user to input text directly, as in some correspondence functions. The print program may also provide data for variables defined in the form.
Finally, the print program uses the form to format the document for display or printing.
Check this link...
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/802d7d454211d189710000e8322d00/frameset.htm

How to know the printprogram and output type for perticular standard script

how to know the print program and output type for perticular standard script and wt the proceure we will fallow to modifie the standard script..if possible u have any sample code plz share with me.....

Hi Phani,
To know the print program and output type for a standard script we have a table called TNAPR. So just you go to SE11 and provide the table name as TNAPR and choose display option.Then go with display entries option and in selection screen you have to provide the form name for whic you want to know the print program and output type.
To modify a standard script first of all you have to copy the standard form for which you need modifications into Zform. Once you done this you can modify the layout set as per your requirement.Then what ever the modifications you have done in layout set for that you need to populate the data.For this you also need to do some modifications to the print program.so you have to options like directly you can modify the print program as per your requirement and other one is you can create a subroutine and do coding in that subroutine. Then you need call this subroutine in the Script Form.like this you can do modifications to the standard script........................... Reward me if its helpful..........
Thanks & Regards.
Laxman.P
B'lore.

Tables and structures are used in a standard scripts

how to find which tables and structures are used in a standard scripts?
pls explain step by step process...
Edited by: abap on Jun 21, 2008 4:36 PM

Go to Transaction SE80, Select Program and paste that program name below..
Then drop down the tree of that program...then you will find option " Dict. Structures"..
Here you can find the tables which has been you for that transaction / program.
Regards,
Santosh

Please assist with modifying this script to read in a list of servers and output results to excel

Hello,
I have an excellent script written by Brian Wilhite to gather the last logged in user using Powershell.
http://gallery.technet.microsoft.com/scriptcenter/Get-LastLogon-Determining-283f98ae/view/Discussions#content
My Powershell Fu is stumbling to modify this script to the following requirements:
Currently the script must be loaded first into Powershell, then it can be executed. I would rather edit the script in my Powershell ISE, add the .txt file to the script itself that gives a list of the servers I need to scan. Then when I
press Run Script in my ISE it executes.
I would also like to output the results of the file to excel (.xls or .csv will do). Currently the results look as follows:
Computer : SVR01
User : WILHITE\BRIAN
SID : S-1-5-21-012345678-0123456789-012345678-012345
Time : 9/20/2012 1:07:58 PM
CurrentlyLoggedOn : False
I would prefer it shows up like so:
Computer User SID Time Currently LoggedOn
SVR01 WILHITE\BRIAN S-1xxx 9/20/2012 1:07:58 PM FalseSRV02 WILHITE\BRIAN S-2xxx 9/26/2014 10:00:00 AM True
Any help you can provide would be greatly appreciated. I'll add the full script to the end of this post.
Thank you.
Function Get-LastLogon
<#
.SYNOPSIS
This function will list the last user logged on or logged in.
.DESCRIPTION
This function will list the last user logged on or logged in. It will detect if the user is currently logged on
via WMI or the Registry, depending on what version of Windows is running on the target. There is some "guess" work
to determine what Domain the user truly belongs to if run against Vista NON SP1 and below, since the function
is using the profile name initially to detect the user name. It then compares the profile name and the Security
Entries (ACE-SDDL) to see if they are equal to determine Domain and if the profile is loaded via the Registry.
.PARAMETER ComputerName
A single Computer or an array of computer names. The default is localhost ($env:COMPUTERNAME).
.PARAMETER FilterSID
Filters a single SID from the results. For use if there is a service account commonly used.
.PARAMETER WQLFilter
Default WQLFilter defined for the Win32_UserProfile query, it is best to leave this alone, unless you know what
you are doing.
Default Value = "NOT SID = 'S-1-5-18' AND NOT SID = 'S-1-5-19' AND NOT SID = 'S-1-5-20'"
.EXAMPLE
$Servers = Get-Content "C:\ServerList.txt"
Get-LastLogon -ComputerName $Servers
This example will return the last logon information from all the servers in the C:\ServerList.txt file.
Computer : SVR01
User : WILHITE\BRIAN
SID : S-1-5-21-012345678-0123456789-012345678-012345
Time : 9/20/2012 1:07:58 PM
CurrentlyLoggedOn : False
Computer : SVR02
User : WILIHTE\BRIAN
SID : S-1-5-21-012345678-0123456789-012345678-012345
Time : 9/20/2012 12:46:48 PM
CurrentlyLoggedOn : True
.EXAMPLE
Get-LastLogon -ComputerName svr01, svr02 -FilterSID S-1-5-21-012345678-0123456789-012345678-012345
This example will return the last logon information from all the servers in the C:\ServerList.txt file.
Computer : SVR01
User : WILHITE\ADMIN
SID : S-1-5-21-012345678-0123456789-012345678-543210
Time : 9/20/2012 1:07:58 PM
CurrentlyLoggedOn : False
Computer : SVR02
User : WILIHTE\ADMIN
SID : S-1-5-21-012345678-0123456789-012345678-543210
Time : 9/20/2012 12:46:48 PM
CurrentlyLoggedOn : True
.LINK
http://msdn.microsoft.com/en-us/library/windows/desktop/ee886409(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/system.security.principal.securityidentifier.aspx
.NOTES
Author: Brian C. Wilhite
Email: [email protected]
Date: "09/20/2012"
Updates: Added FilterSID Parameter
Cleaned Up Code, defined fewer variables when creating PSObjects
ToDo: Clean up the UserSID Translation, to continue even if the SID is local
#>
[CmdletBinding()]
param(
[Parameter(Position=0,ValueFromPipeline=$true)]
[Alias("CN","Computer")]
[String[]]$ComputerName="$env:COMPUTERNAME",
[String]$FilterSID,
[String]$WQLFilter="NOT SID = 'S-1-5-18' AND NOT SID = 'S-1-5-19' AND NOT SID = 'S-1-5-20'"
Begin
#Adjusting ErrorActionPreference to stop on all errors
$TempErrAct = $ErrorActionPreference
$ErrorActionPreference = "Stop"
#Exclude Local System, Local Service & Network Service
}#End Begin Script Block
Process
Foreach ($Computer in $ComputerName)
$Computer = $Computer.ToUpper().Trim()
Try
#Querying Windows version to determine how to proceed.
$Win32OS = Get-WmiObject -Class Win32_OperatingSystem -ComputerName $Computer
$Build = $Win32OS.BuildNumber
#Win32_UserProfile exist on Windows Vista and above
If ($Build -ge 6001)
If ($FilterSID)
$WQLFilter = $WQLFilter + " AND NOT SID = `'$FilterSID`'"
}#End If ($FilterSID)
$Win32User = Get-WmiObject -Class Win32_UserProfile -Filter $WQLFilter -ComputerName $Computer
$LastUser = $Win32User | Sort-Object -Property LastUseTime -Descending | Select-Object -First 1
$Loaded = $LastUser.Loaded
$Script:Time = ([WMI]'').ConvertToDateTime($LastUser.LastUseTime)
#Convert SID to Account for friendly display
$Script:UserSID = New-Object System.Security.Principal.SecurityIdentifier($LastUser.SID)
$User = $Script:UserSID.Translate([System.Security.Principal.NTAccount])
}#End If ($Build -ge 6001)
If ($Build -le 6000)
If ($Build -eq 2195)
$SysDrv = $Win32OS.SystemDirectory.ToCharArray()[0] + ":"
}#End If ($Build -eq 2195)
Else
$SysDrv = $Win32OS.SystemDrive
}#End Else
$SysDrv = $SysDrv.Replace(":","$")
$Script:ProfLoc = "\\$Computer\$SysDrv\Documents and Settings"
$Profiles = Get-ChildItem -Path $Script:ProfLoc
$Script:NTUserDatLog = $Profiles | ForEach-Object -Process {$_.GetFiles("ntuser.dat.LOG")}
#Function to grab last profile data, used for allowing -FilterSID to function properly.
function GetLastProfData ($InstanceNumber)
$Script:LastProf = ($Script:NTUserDatLog | Sort-Object -Property LastWriteTime -Descending)[$InstanceNumber]
$Script:UserName = $Script:LastProf.DirectoryName.Replace("$Script:ProfLoc","").Trim("\").ToUpper()
$Script:Time = $Script:LastProf.LastAccessTime
#Getting the SID of the user from the file ACE to compare
$Script:Sddl = $Script:LastProf.GetAccessControl().Sddl
$Script:Sddl = $Script:Sddl.split("(") | Select-String -Pattern "[0-9]\)$" | Select-Object -First 1
#Formatting SID, assuming the 6th entry will be the users SID.
$Script:Sddl = $Script:Sddl.ToString().Split(";")[5].Trim(")")
#Convert Account to SID to detect if profile is loaded via the remote registry
$Script:TranSID = New-Object System.Security.Principal.NTAccount($Script:UserName)
$Script:UserSID = $Script:TranSID.Translate([System.Security.Principal.SecurityIdentifier])
}#End function GetLastProfData
GetLastProfData -InstanceNumber 0
#If the FilterSID equals the UserSID, rerun GetLastProfData and select the next instance
If ($Script:UserSID -eq $FilterSID)
GetLastProfData -InstanceNumber 1
}#End If ($Script:UserSID -eq $FilterSID)
#If the detected SID via Sddl matches the UserSID, then connect to the registry to detect currently loggedon.
If ($Script:Sddl -eq $Script:UserSID)
$Reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey([Microsoft.Win32.RegistryHive]"Users",$Computer)
$Loaded = $Reg.GetSubKeyNames() -contains $Script:UserSID.Value
#Convert SID to Account for friendly display
$Script:UserSID = New-Object System.Security.Principal.SecurityIdentifier($Script:UserSID)
$User = $Script:UserSID.Translate([System.Security.Principal.NTAccount])
}#End If ($Script:Sddl -eq $Script:UserSID)
Else
$User = $Script:UserName
$Loaded = "Unknown"
}#End Else
}#End If ($Build -le 6000)
#Creating Custom PSObject For Output
New-Object -TypeName PSObject -Property @{
Computer=$Computer
User=$User
SID=$Script:UserSID
Time=$Script:Time
CurrentlyLoggedOn=$Loaded
} | Select-Object Computer, User, SID, Time, CurrentlyLoggedOn
}#End Try
Catch
If ($_.Exception.Message -Like "*Some or all identity references could not be translated*")
Write-Warning "Unable to Translate $Script:UserSID, try filtering the SID `nby using the -FilterSID parameter."
Write-Warning "It may be that $Script:UserSID is local to $Computer, Unable to translate remote SID"
Else
Write-Warning $_
}#End Catch
}#End Foreach ($Computer in $ComputerName)
}#End Process
End
#Resetting ErrorActionPref
$ErrorActionPreference = $TempErrAct
}#End End
}# End Function Get-LastLogon

This should work:
Get-LastLogon -Computername (Get-content .\Servers.txt) | Export-CSV .\Output.csv -NoTypeInformation
I just tested it on my test domain and it did the trick.

Need to modify Standard Purchase Order Stylesheet (PO_STANDARD_XSLFO.xsl)

Hi
We need to modify Standard Purchase Order Stylesheet (po_standard_xslfo.xsl) . Current stylesheet generating PO like the following.
<FOR-EACH>
ITEM_NUM
ITEM_DESCRIPTION
<FOR-EACH>
SHIP_TO_ADDRESS_LINE1 NEED_BY_DATE QUANTITY
</FOR-EACH>
</FOR-EACH>
Based on this, we are getting the output like this:
Item Num 1
Itme Description 1
Ship To: Needed: Quntity
1234. A1 Avenue JUL 200
SomeCity, CA 90706
1234. A1 Avenue AUG 200
SomeCity, CA 90706
4567 B1 Avenue JUL 100
City2 , CA
Itme Description 2
Ship To: Needed: Quntity
5689. c1 Avenue JUL 200
SomeCity, CA 90706
Our requirement is like this:
Item Num 1
Itme Description 1
Ship To: 1234. A1 Avenue, SomeCity, CA 90706
Month: JUL AUG SEP
Quantity: 200 200 100
Ship To: VVV4567 B1 Avenue , SomeCity, CA 90706
Month: JUL AUG SEP
Quantity: 100 200 100
So we need to add ship_to group (ITEM/SHIP_TO) .
How can we use group by item, ship_to..
<fo:block> <xsl:value-of select="ITEM_NUM"/> </fo:block>
<fo:block> <xsl:value-of select="ITEM_DESCRIPTION"/> </fo:block>
<xsl:for-each select="/PO_DATA/LINES/LINES_ROW/LINE_LOCATIONS/LINE_LOCATIONS_ROW">
<fo:block> <xsl:value-of select="SHIP_TO_ADDRESS_LINE1"/> </fo:block>
<fo:block> <xsl:value-of select="substring(NEED_BY_DATE,4,3)"/> </fo:block>
<fo:block> <xsl:value-of select="QUANTITY"/> </fo:block>
</xsl:for-each>
</xsl:for-each>
In the above code I need split the data by ITEM_NUM/ SHIP_TO_ADDRESS_LINE1.
I am new to xsl-fo. I tried different ways,but ship_to_address_line1 is generating wiith each quanty and need_by_date.
Please guide me.
Thank you
Raju
Edited by: subbaraju on May 7, 2009 2:36 PM

Hi Chandra
Thank you very much for your suggestion.
I tried that way, I created some sample xml file, I created sample rtf file and I generated xsl-fo file. I copied the part of code into my PO_STANDARD_PO.XSL. I am getting some error.
I noticed PO_STANDARD_PO.XSL is xsl version 1.0 and the generated sample data is with xsl version 2.0.
The generated code is using “for-each_group”, “sum()”, “current-group()” etc. Is these functions will work in xslt 1? Or do we need to code different way?
We are in Oracle APPS 12.0.4.
Thank you
Raju
Edited by: subbaraju on May 26, 2009 11:56 AM

Modifying standard script

Similar Messages

Maybe you are looking for