Modifying t-codes to export batch jobs to drive rather than print

There are several t-codes that schedule batch jobs, but they only print. Is it possible to revise a t-code to export batch jobs directly to a drive?
What is the code for this?
Thanks.

What do you mean by "export batch jobs"? If you need the program that runs in the batch job to output something into a file instead of the printer, then, naturally, it will have to be programed accordingly. Also keep in mind that in background only file server is available (OPEN DATASET). So if, say, you want to run a batch job and have it write to your local C drive then it's simply not possible.
Otherwise please clarify the question.

Similar Messages

How to export as .MP4 or .M4v rather than .MOV?

I have a PS3 which supports MPEG-4, however when I export "movie to MPEG-4" it creates a .MOV Quicktime file rather a .MP4 or .M4V. The PS3 doesn't support .MOV. The only way I can find to export with .m4v is to use the AppleTV default which reduces the 1080 res to 540. I can't find a way at all to get a .MP4
So how do you export a 1080 iMovie as a 1080 .MP4 or .M4V format? Is this a handicap of '08 and something you could do in iMovie HD?
I really wish the AppleTV would support higher bitrates and 1080i, but that's another topic.

Use Share/Export using Quicktime...
Pick h.264 as codec and set up for 1920x1080 with a high data rate.

Shake exports 1,100 individual frames rather than a Quicktime movie

I'm stumped. I rendered a file-out node that was set to Quicktime format and 720p60 codec and I ended up with 1,101 individual Quicktime files, or frames, I guess, rather than a single file, a Quicktime movie that was 1,101 frames long. I've done the same thing many times before, and have always ended up with a Quicktime movie that I could import back into Shake to continue with some more rotoscoping.
Each "file" is 240 kb in size, though when I open them in Quicktime, there seems to be no image there. Just a blank white screen.
Has this happened to anybody else? I cannot see that I have changed anything in my usual workflow settings.
Any advice most appreciated,
Jim

FYI:
http://discussions.apple.com/help.jspa#answers
Patrick

Batch Job Processing

Hi,
I have 2 selection screens.i have entered the data in 1st screen and press 'F8',now i wil be getting 2nd screen.In this i have to select the check boxes.once i checked this check boxes that could be saved automatically.
Can any one please suggest me how to get this. I have to go for a batch job for this.
thanks
BAlu

To set up a batch job for delivery creation use SM36 T-code.
Input batch job name say - ZSD_CREATE_DELY_SALES_ORG
Select class = C or B.
Set up by / created by = BATCHADMIN or your id
Program Name = WS_DELIVERY_UPDATE
Varient = (as per your requirement - say for a particular sales area and plant)
Click on "Check" icon and "Save".
Go to the main page, select icon "Schedule a Batch job".
Give detils like daily, weekly or periodic or Immediate.
Enter date and time accordingly. Save it.
Same thing applies for Invoice creation batch job.
Use program name:RSBDCSUB
All other steps remain the same.
Hope this will help you out !
Regards,
Rajesh Banka
Reward suitable Points

Automatically output report to excel from a batch job

We have business users who require that a standard report be run daily as a batch job and output to a printer, which is using a large pile of paper every day. I have challenged the rationale for this without success, and am trying to find a way to continue to run the batch job but output the report to an excel file and e-mail it to a manager. I know that this can be done by a good ABAP programmer, but I am trying to find a way to set up the batch job to do this without additional ABAP, as programming resources are very limited. I would appreciate input from anybody who knows how to do this.

Likely because your user is continuing to call the service in a Windows (classic) DOMAIN\username format, and not in the Claims identity it should be.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Smartform Printing through Batch Job

Hi
Please help in the following issue :
We have a report thourgh which say 10 pages needs to be printed.
On eachpage we have page numbers like 1 of 10, 2 of 10 etc. and on the last page 10 of 10 will be printed.
when the report is executed in foreground, the rints are perfect s expected. But when the same report is executed through Batch Job, the pages are being printed as 1 of &&, 2 of && etc, when it come to last page the print is 10 of 10.
So, thr Batch job the last page of the print is OK, except all other pages, the issue is only printing this page nos.
Please advise.
Regards
Shankar

hi ,
make sure that u declared that page no printing window as final window.try it.
Regards,
karthikeyan k s,

How to export my file to wav on hard-disc rather than burning a CD

Hi i have tried to figure this out..I guess its looking me straight in the face but here's hoping someone can help!
I have recorded a talk imported it into WB and have added tracks to make it easier to navigate. I have successfully written it to cd. Now what i really want is to be able to export my wav files to a folder and then import those wav files into my Rimage cd duplicator. It was so easy with audition but am trying to wean myself off the PC and so am trying out Logic/wave burner. Though not perfect i tried to read the files on the cd copy them into a folder..but the files have a cda extension a sort of shortcut file I think. But i cannot get the files (wav) to copy. As i say I would prefer anyway to export direct to the file rather than using the cd as it It leaves open the possibility of file copying problems due to transferring it first onto a cd. Any help would be greatly appreciated ! Thank you Paul

Hi thanks so much for all your advice. I would have replied earlier but for some reason couldn't logon! Anyway i am in so back to WB...
Yes my initial request was 2 fold really- though i could have been clearer!
1/ To export to my hard disc the wav files of the cd project i have created in wb
2/ When exporting the lets say 1 hour talk - that the exported wav files be separate wav files reflecting the cue files i have placed on the time line in wb. In this way each separate wav file could then be imported into my rimage cd duplicator software to create my cd project. e.g cue1.wav cue2.wav etc
now in Audition this can be done easily by opening the cue window selecting the cues hitting merge then hitting batch and that's it, all done. In fact i went back to audition to do this ie I exported the wb file imported it to audition that recognised it no problem and then finally exported to wav which is done automatically during the above process.
I may be missing something , but it looks like this 'slicing' of one long audio file isn't as easily done in wb.... i do want to get off the pc for all this so any further help or perhaps a simple what to do summary would be great. I a aware all the answers could be in your replies already but i am getting into somewhat of a tizzy!! Thanks Paul

Batch capture opening rather than log and transfer

What causes batch capture to open rather than log and transfer? Attempting to media manage and reimport clips but only batch capture will open? Thanks, Michael

Hey there camera400,
were there any solutions you found? I'm having exactly the same issue at the moment....
I'm following the "RED FCS White Paper" dated November 11, 2008 from the RED support page-
Doing "Workflow 2: Work offline Using ProRes; Finish Using RED Quicktime Media" - (my offline was ProRes (hq)).
Based on this workflow, I get all way through step 5.3 of Workflow 2 -- creating offline project and setting Log & Transfer settings.
The Paper suggests that when I right-click the new offline sequence, select "Batch Capture" from the shortcut menu, the Log & Transfer window will appear, allowing me to reinjest RED footage.
However, it opens Batch Capture instead...
Any insights appreciated.

Maintain commodity code/CAS no. in batch job

Hi experts, is it a fast way to maintain lots of commodity code/CAS no. in batch job? U know, it costs time maintaining one entry by one entry in "define commodity codes/import commodity code no. by country" & "define CAS numbers" (IMG). Pls advise. Thx.

Hi Prakash,
I'm authorised to use LSMW but fail to "read data". System pops up "File 'c:\abc.txt' does not exist or is currently locked. Message no. /SAPDMC/LSMW_OBJ_070019". Actually, the file named "abc.txt" is not being used when reading data (lsmw) & located in C drive.
Pls advise. Thx.

T code to find sales orders/Deliveries for which batch job could not create

Hi
Once a PGI has been created for a sales order, the invoice should be created in nightly batch. Once is a while, something is wrong and SAP cannot create the invoice. I know there is a transaction that will list the orders / deliveries where SAP could not create the invoice. Can you tell me what that t-code is? Thanks

Lakshmipathy
I think you did not get my point corectly , I know , billing docs due list , what I need was after batch job running , for some deliveries , due to some reason , billing docs might not have created .
Business needs to know only thsese delivery docs in a T code or table but not all the due document . I did not find answer for this question in SDN .
I got the answer now for this question , it is V.21 .
Thanks for your time .

Batch Job Error Messages

Hi Gurus,
I have a program with rounddown quantities in deliveries notes. This program is run in background with all other programs. When we checked the batch job error log, we found out that when it gets to this Rounddown program, there are some SAP generated errors messages (examples are listed below).
This issue is there is no way to know exactly which deliveries the error is generated from and if the program actually rounddown the quantities of all the deliveries passed to it and so on, because this error messages are not specific enough (like we can see below).
This program passed this new rounddown quantity number from the internal table using a BAPI.
Is there a way to change this SAP generated error messages to be specific enough like stating which actual delivery number is been affected or even stop at the error and send an email to the user to change the delivery or something in that manner, OR is there a way we can replace this SAP generated error messages with our own messages and send email out to the user.
Error Messages:-
01/16/2008 01:40:40 Step 005 started (program ZSDSO_DELIVERY_QTY_ROUNDDOWN, variant , user ID AUTOSYSUSER
01/16/2008 01:51:35 Item 000020 belongs to delivery group 001
01/16/2008 01:52:13 Item 000020 belongs to delivery group 001
01/16/2008 01:52:15 Item 000030 belongs to delivery group 001
01/16/2008 01:52:19 Item 000020 belongs to delivery group 001
01/16/2008 01:52:29 Dynamic credit check has been exceeded                              23,984.52 USD
01/16/2008 01:52:30 Item 000020 (change quantity manually to             400 PC because of complex struct
01/16/2008 01:52:30 Item 000030 (change quantity manually to             400 PC because of complex struct
01/16/2008 01:52:30 Quantity correlation for dependent items has been carried out
01/16/2008 01:52:30 Item 000020 belongs to delivery group 008
01/16/2008 01:52:30 Item 000030 belongs to delivery group 008
01/16/2008 01:52:31 Dynamic credit check has been exceeded                              23,984.52 USD
01/16/2008 01:52:32 Delivery quantity must be entered for the item
01/16/2008 01:52:34 Dynamic credit check has been exceeded                              23,984.52 USD
01/16/2008 01:53:05 Item 000020 belongs to delivery group 001
01/16/2008 01:54:40 Dynamic credit check has been exceeded                              15,501.88 USD
01/16/2008 01:55:53 Item 000020 belongs to delivery group 001
Thanks.
Points will be awarded.

This is the Subrouting Form code.
FORM call_bapi_delivery_change TABLES p_i_lips LIKE i_lips.
DATA: w_header_data TYPE bapiobdlvhdrchg,
        w_header_control TYPE bapiobdlvhdrctrlchg,
        w_delivery TYPE bapiobdlvhdrchg-deliv_numb.
DATA: i_item_data TYPE STANDARD TABLE OF bapiobdlvitemchg,
        w_item_data TYPE bapiobdlvitemchg,
        i_item_control TYPE STANDARD TABLE OF bapiobdlvitemctrlchg,
        w_item_control TYPE bapiobdlvitemctrlchg,
        i_return TYPE STANDARD TABLE OF bapiret2,
        w_return TYPE bapiret2.
LOOP AT p_i_lips INTO w_lips.
    w_item_data-deliv_numb = w_lips-vbeln.
    w_item_data-deliv_item = w_lips-posnr.
    w_item_data-material = w_lips-matnr.
    w_item_data-batch = w_lips-charg.
    w_item_data-dlv_qty = w_lips-lfimg.
    w_item_data-dlv_qty_imunit = w_lips-lfimg.
    w_item_data-fact_unit_nom = 1.
    w_item_data-fact_unit_denom = 1.
    APPEND w_item_data TO i_item_data.
    CLEAR w_item_control.
    w_item_control-deliv_numb = w_lips-vbeln.
    w_item_control-deliv_item = w_lips-posnr.
    IF w_lips-delete NE 'X'.
      w_item_control-chg_delqty = 'X'.
    ELSEIF w_lips-delete EQ 'X'.
      w_item_control-del_item = 'X'.
    ENDIF.
    APPEND w_item_control TO i_item_control.
ENDLOOP.
w_header_data-deliv_numb = w_lips-vbeln.
w_header_control-deliv_numb = w_lips-vbeln.
w_delivery = w_lips-vbeln.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data               = w_header_data
      header_control            = w_header_control
      delivery                  = w_delivery
TECHN_CONTROL             =*
    TABLES
HEADER_PARTNER            =*
HEADER_PARTNER_ADDR       =*
HEADER_DEADLINES          =*
      item_data                 = i_item_data
      item_control              = i_item_control
ITEM_SERIAL_NO            =*
SUPPLIER_CONS_DATA        =*
EXTENSION1                =*
EXTENSION2                =*
      return                    = i_return
TOKENREFERENCE            =*
IF sy-subrc EQ 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = 'X'.
    w_zbdcopendn-otce706 = 'X'.
    MODIFY i_zbdcopendn FROM w_zbdcopendn TRANSPORTING otce706
    WHERE delivery EQ w_deliveries-vbeln.
ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    DELETE i_zbdcopendn WHERE delivery EQ w_deliveries-vbeln.
   DELETE i_deliveries WHERE vbeln EQ w_lips-vbeln.*
    w_bad_delv-vbeln = w_deliveries-vbeln.
    APPEND w_bad_delv TO i_bad_delv.
ENDIF.
ENDFORM.                    " call_bapi_delivery_change
Thanks again.

Batch job

Hi I am working on batch job .
my program is printing invoice as well as downloading and I have run this program in batch,
I am using the FM job_open , job_submit and job_close.
but it is failing in job_submit with sy-subrc eq 1 .
giving me error bad print parameter , I haven;t done this before.
I think it should be option.
CALL FUNCTION 'JOB_SUBMIT'
    EXPORTING
      authcknam = SY-UNAME "tbtcjob-authcknam
      jobcount = tbtcjob-jobcount
      jobname   = p_jobnam
      language = sy-langu
       report    = c_reprot
      variant   = pvariant
    EXCEPTIONS
      OTHERS    = 01.
could anybody pls guide me why it is so???
Regards.
Kusum.

you can below code
OPEN DATASET gv_file FOR INPUT IN TEXT MODE ENCODING DEFAULT
                            WITH SMART LINEFEED.
    IF sy-subrc EQ 0.
      WHILE sy-subrc IS INITIAL.
        READ DATASET gv_file INTO gwa_header_file.
        IF sy-subrc NE 0.
          EXIT.
        ELSE.
          APPEND gwa_header_file TO gt_header_file.
        ENDIF.
      ENDWHILE.
      CLOSE DATASET gv_file.
    ENDIF.
ENDIF.

Submit batch job daynamically using batch user id

Hi,
I need to submit the background job dynamically from ABAP program with BATCH user id.
I have created new program. Users will execute program in foreground.
Had issue with USER id. If I give my user id then batch job successfully creating. If I give u2018BAICHu2019 id then it is giving the error.
Am I doing any thing wrong here?
Code:
Open Job
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname = jobname
    IMPORTING
      jobcount = w_jobcount.
    SUBMIT zrufilep WITH p_file1 = sourfile
                    WITH p_file2 = destfile
                    VIA JOB jobname NUMBER w_jobcount
                    USER 'BATCH_FI'
                    AND RETURN.
Schedule and close job.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount = w_jobcount
          jobname   = jobname
          sdlstrtdt = sy-datum
          sdlstrttm = sy-uzeit.
Thanks

Can any body tell me if that authorization is given to the user, can he submit any other job from front end?
As you can see if he can, it will conflict security issues of business. So If he is not permitted to execute these kind of statements in any other program, would he be confined to using diff user in this program only?
Or is there any other way-out to confine the user for getting this authorization for a single T-code or such?

How to create a batch-job dynamically?

Hello,
I would like to create a batch-job from within my abap code.
Therefore I want to determine a abap-report to be executed every X-Hours.
Do you have some sample code for creating a batch job?
I need to do it in abap because I want to create a TN to trigger the code creating the job.
So the user interaction will be minimal to start a periodic batch job.
thanks.

Hi Daniel,
select options could be stored by export/import to/from database:
      DESCRIBE TABLE t_vkpos LINES n.
      READ TABLE t_vkpos INDEX n.
      lastmaxvbeln = t_vkpos-vbeln.
      PERFORM get_varimemkey USING p_vari CHANGING vkposmemkey.
      EXPORT lastmaxvbeln TO DATABASE indx(zk) ID vkposmemkey.
      IF NOT sy-subrc IS INITIAL.
      PERFORM get_varimemkey USING p_vari CHANGING vkposmemkey.
      IMPORT lastmaxvbeln FROM DATABASE indx(zk) ID vkposmemkey.
      IF sy-subrc IS INITIAL.
        ls_vbeln-sign   = 'I'.
        ls_vbeln-option = 'GT'.
        ls_vbeln-low    = lastmaxvbeln.
        APPEND ls_vbeln.
      ENDIF
FORM get_varimemkey USING    vari TYPE raldb_vari
                    CHANGING memkey TYPE char22.
IF vari IS INITIAL.
    RAISE get_varimemkey_unexepected.
ENDIF.
CONCATENATE 'Z_VKPOS_' vari INTO memkey.
ENDFORM.                    "
regards
Walter Habich

Class is not appearing in "Java Batch Job Class Search" when trying to add.

Hi,
I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
Steps are as follows:
1-Created file by copying the exiting file
CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
public class CmCreateLatePaymentChargesProcess
extends CmCreateLatePaymentChargesProcess_Gen
File location :
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
2-Run ApplyCm build successfully , which generated these files:
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
All the above classes are part of CM.jar file
ContextManagedObjects.xml ; contains these information
<com.splwg.shared.environ.ContextManagedObjectData>;
<domainPackages/>
<lookupFieldClasses class="tree-map">
<no-comparator/>
</lookupFieldClasses>
<cobolAlgorithmInterfaceExtensions class="tree-map">
<no-comparator/>
</cobolAlgorithmInterfaceExtensions>
</com.splwg.shared.environ.ContextManagedObjectData>;
packageMetaInfo.xml was not created
Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
I tried restarting the Tomcat application server, still not appearing.
Where did I go wrong about it?
Thanks
Edited by: cc&amp;amp;b-user on Jul 29, 2011 12:39 AM
Edited by: ccb-user on Aug 2, 2011 9:28 PM
Edited by: ccb-user on Aug 7, 2011 11:36 PM

Hi,
Did you copying the base file CreateLatePaymentChargesProcess.java?
I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
The batch is working fine in my end.
Thanks,
Atul Singh.

Modifying t-codes to export batch jobs to drive rather than print

Similar Messages

Maybe you are looking for