Modifying the configuration files in OBIEE 11g

Hi
We are facing an error when we tried to to add "<DashboardMaxBeforeMenu>" tag in the instanceconfig.xml manually and restart the presentation services of OBIEE 11g .
I had come across few suggestions that, configuration files in OBIEE 11g cannot be modified manually. I am doubtful on these suggestions . So please, let me know for sure wether we can modify the configuration files in OBIEE 11g manually or not.
It will be very helpful if the process to modify the configuration files in OBIEE 11g is shared with us.
Thanks.

Hi,
I could not tell you whether the; <DashboardMaxBeforeMenu>10</DashboardMaxBeforeMenu> still works in 11g.
What I do know is that you could manually edit the configuration files. The only thing is when you modify this file via the Enterprise Manager, your customizations get lost. You have to manually add them again.
Cheers,
Daan Bakboord
http://obibb.wordpress.com

Similar Messages

  • How may I update the RPD file on obiee 11g

    how can I update my repoistory file to the obiee11g server? -thanks

    Hi,
    Please refer this, http://shivabizint.wordpress.com/2012/05/06/manual-deployment-of-obiee-11g-rpd/
    Regards,
    Dpka

  • About the filter function in OBIEE 11g

    Hi, all.
    when i use the filter function in OBIEE 11g, it turn out a wrong result.
    The operation steps and detail are described as follow:
    1. In the Column Formula pane, I typed the Formula of the column 'count of customer' as:
    FILTER(count(distinct("customer info dimesion"."customerID")) USING ("TradeType Dimesion"."TradeType" = '001'))
    2. But the phisical SQL about this column in the NQquery file is that: "count(distinct(T11520.CUSTOMERID)) as c5, "
    which means that, the filter wasn't applied, right?
    If so, what shall I do in this situation, in other words , how can i make a Condition COUNT？
    Any Suggestion is appreciated!
    Thank you in advance~~O(∩_∩)O~

    Hi katherine,
    FILTER(count(distinct("customer info dimesion"."customerID")) USING ("TradeType Dimesion"."TradeType" = '001'))I think your formula there is mistake like many braces...instead type this in your f(x)
    =>Filter(count(distinct customer_id) USING trade type='001')
    This filter function is same like a case statement,if you filter still gives error write a case statement
    CASE WHEN TradeType Dimesion.TradeType='001' THEN count(distinct customer info dimesion.customerID) ELSE 0 END
    Will it be helpful?,follow this etiquette http://forums.oracle.com/forums/ann.jspa?annID=939
    By,
    KK

  • [svn] 3519: Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service .

    Revision: 3519
    Author: [email protected]
    Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
    Log Message:
    Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
    Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
    Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xml

    Hi,
    Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
    What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
    What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
    some port while in reality there isn't.
    I'll eventually contact Microsoft Support, thanks for the suggestion.
    ▼
    ▲

  • Location of query log files in OBIEE 11g (version 11.1.1.5)

    Hi,
    I wish to know the Location of query log files in OBIEE 11g (version 11.1.1.5)??

    Hi,
    Log Files in OBIEE 11g
    Login to the URL http://server.domain:7001/em and navigate to:
    Farm_bifoundation_domain-> Business Intelligence-> coreapplications-> Dagnostics-> Log Messages
    You will find the available files:
    Presentation Services Log
    Server Log
    Scheduler Log
    JavaHost Log
    Cluster Controller Log
    Action Services Log
    Security Services Log
    Administrator Services Log
    However, you can also review them directly on the hard disk.
    The log files for OBIEE components are under <OBIEE_HOME>/instances/instance1/diagnostics/logs.
    Specific log files and their location is defined in the following table:
    Log Location
    Installation log                     <OBIEE_HOME>/logs
    nqquery log <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
    nqserver log <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
    servername_NQSAdminTool log      <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
    servername_NQSUDMLExec log                          <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
    servername_obieerpdmigrateutil log (Migration log)           <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIServerComponent/coreapplication_obis1
    sawlog0 log (presentation)                          <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1
    jh log (Java Host)                               <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIJavaHostComponent\coreapplication_obijh
    webcatupgrade log (Web Catalog Upgrade)                <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1
    nqscheduler log (Agents)                          <OBIEE_HOME>/instances/instance1/diagnostics/logsOracleBISchedulerComponent/coreapplication_obisch1
    nqcluster log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIClusterControllerComponent\coreapplication_obiccs1
    ODBC log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OracleBIODBCComponent/coreapplication_obips1
    opmn log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
    debug log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
    logquery log                               <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
    service log                                    <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
    opmn out                              <OBIEE_HOME>/instances/instance1/diagnostics/logs/OPMN/opmn
    Upgrade Assistant log                         <OBIEE_HOME>Oracle_BI1/upgrade/logs
    Regards
    MuRam

  • BUG: JBO-33001: Cannot find the configuration file bc4j.xcfg

    Hi,
    I get the exception JBO-33001: Cannot find the configuration file com\trivadis\adf\demos\login\model\common\bc4j.xcfg in the classpath
    after I have edited the file outside of JDev9052. Why? Because I followed the instructions of the help document "Modifying the JClient Login Dialog for JDBC". To get the JCLoginDialog you have to remove some lines in the bc4j.xcfg file.
    I have deleted the classes directory, rebuild the complete workspace, but I still get the exception.
    Any comments?
    Thanks,
    Markus
    Complete stacktrace:
    oracle.jbo.JboException: JBO-33001: Cannot find the configuration file com\trivadis\adf\demos\login\model\common\bc4j.xcfg in the classpath
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:369)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:135)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:220)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:97)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.loadCpx(JUMetaObjectManager.java:612)
         at com.trivadis.adf.demos.login.view.FormDeptView1.main(FormDeptView1.java:325)
    ## Detail 0 ##
    oracle.jbo.JboException: JBO-33000: Cannot find the configuration file registerConnectionsFromDocument
         at oracle.jbo.client.Configuration.registerConnectionsFromDocument(Configuration.java:1052)
         at oracle.jbo.client.Configuration.loadFromStream(Configuration.java:264)
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:352)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:135)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:220)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:97)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.loadCpx(JUMetaObjectManager.java:612)
         at com.trivadis.adf.demos.login.view.FormDeptView1.main(FormDeptView1.java:325)
    ## Detail 0 ##
    java.lang.NullPointerException
         at oracle.jbo.client.Configuration.registerConnectionsFromDocument(Configuration.java:1026)
         at oracle.jbo.client.Configuration.loadFromStream(Configuration.java:264)
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:352)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:135)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:220)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:97)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.loadCpx(JUMetaObjectManager.java:612)
         at com.trivadis.adf.demos.login.view.FormDeptView1.main(FormDeptView1.java:325)

    Repost.
    The original post date was Sep 05 2004, not Aug 17 2001. :-)

  • Discussion forum Cannot find the configuration file config\common\bc4j.xcfg

    I successfully deployed the discussion form portlet and registered it with portal. I can reach the provider test page at Http://myserver:7777/forum/providers/forum
    Everything seems to be good except when I add the portlet to a page, and then view the page, I see an error in the portlet:
    "Unable to perform the operation: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-33001: Cannot find the configuration file config\common\bc4j.xcfg in the classpath"
    I have verified that bc4j.xcfg (as I have modified it) exists in:
    $IAS_HOME\j2ee\OC4J_Portal\applications\forum\forum\WEB-INF\classes\config\common
    I followed the instructions exactly. Does anyone know how to resolve this error? I'm running portal 9.0.2.3.0B, PDK 9.0.2.6.2 and the latest discussion forum download (downloaded 7/1/2004)
    Many thanks in advance!

    No ideas anyone?

  • Imac is no longer able to open the Configuration file

    Hi ,
    I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
    The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
    My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
    I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
    I tried using the Airport Setup assistant (imac), I received this message:
    "Appropriate Airport hardware was bot found on this computer,if you recently
    Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
    The imac does not have a card, nor do i think it needs one.
    I would like to be able to at least open the configuration file.
    Thank you for reading my post.
    Eme
    Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.4)  

    Hi Kes, a star for the company !
    I made an error on my first post I have a Netopia modem, Airport router.
    And so it remains, i guess that there must be an easy answer somewhere
    that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
    As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
    particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
    Good luck,w/ this Q.
    regards Eme
    Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.5)  

  • No dsn is present in the configuration file in the reporting services 2008

    HI i have found this error in the log file of my reporting services ,
    when i comes to the Configuration file in that
    my DSN path is empty no input code is there in that DSN tags
    <DSN>
    <DSN/>
    it shows the empty tags,
    and my Current Report Server Report Credentials are Windows,Service account credentails
    will it take the problem or what
    We have repair the BIDS setup also still not able to solve my issue.
    once this is  resolved now able to send the emails using subscriptions.
    pls infom abut this , i have sufferd this problem last 20 days.
    Please update the above query with high priority
    TanQ

    Hi Ychinnari,
    According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
    DSN specify the database server that hosts the report server database connection string.  The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
    existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
    Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
    On the Database page, click Change Database.
    We can create a new report server database or select an existing database, then click Next.
    Connect to the instance of the Database Engine that you will use to create and host the report server database.
    Specify properties used to create the database.
    Specify the credentials used by the report server to connect to the report server database.
    Review the information on the Summary page to verify the settings are correct, and then click Next.
    Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
    For detail information about Configure a Report Server Database Connection, please refer to the following document:
    https://msdn.microsoft.com/en-us/library/ms159133.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

    All,
    I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
    configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
    error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
    tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
    As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
    http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
    when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
    This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
    to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
    trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
    groups for different applications, just as I'm trying here with Office 2013.
    Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
    and publish all applications within a package to a user regardless of whether they are in the correct group or not?
    The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
    Thanks

    Nicke,
    The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
    No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
    http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
    2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
    I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
    on the machine when delivered?
    <Configuration>
      <Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
        <Product ID="ProPlusVolume">
          <Language ID="en-us" />
    <ExcludeApp ID="Access" />
    <ExcludeApp ID="InfoPath" />
        </Product>
      </Add>
    </Configuration>
    3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
    through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
    I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
    http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
    rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
    Dan,
    Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
     From what I’ve read / watched  I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
    them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
    (I think).
    The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
    users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
    However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
    suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
    to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
    Is my understanding above correct or have I missed some options / methods?
    If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
    this use case is the AppV method one which will be unsuitable?
    Thanks

  • CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

  • Error while updating the configuration files (MOB20003)

    hi,
    After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

    Hi Somesh,
    If i am not wrong, only a war file deployment is needed to make ipad work.
    This happens with URL hitting directly on the Server.
    If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
    Regards,
    Atul

  • Unable to open the configuration file

    A new installation of Thunderbird, open the Thunderbird error, cannot open the configuration file, the configuration file is missing or cannot access. My OS:Win 7 32bit

    Can you provide a screenshot of your problem?
    http://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem

  • I keep getting the error "zotero could not be installed because firefox cannot modify the needed file". Any suggestions on how to fix this?

    After downloading Zotero (a plug in that is in theory custom-designed for firefox), I get an error message that says "zotero could not be installed because firefox could not modify the needed file". That's all the detail I have.

    You get this error if you install an extension that needs to be unpacked in order to work properly, but this isn't happening. The default is to copy the file to the extensions folder and rename the file part to the ID of the extension.
    *https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
    You can try to set the extensions.alwaysUnpack pref(s) on the <b>about:config</b> page to true.
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
    If this hasn't helped then also delete the addons.sqlite file if present.

  • Error: "FT DeepDark 11.3.1 could not be installed because Firefox cannot modify the needed file." What does this mean?

    In an earlier version (Firefox v.31) on this, and (presently) on two other PC's, I was/am able to run add-on FT DeepDark 11.3.1 without any problems. It was only recently - after updating to v.32.0.3 on this PC that this situation started. The PC in question is a Dell Dimension 8400 Intel P4 running Windows 7, though I'm thinking it may have something to do with the newer version of Firefox. Could anyone help me with this? I like this add-on because it is easier in my eyes when browsing the internet. Thanks
    PS: Attempted to install the troubleshooter, and again I received a similar error: "Troubleshooter could not be installed because Firefox cannot modify the needed file."

    This error has been reported before in this bug:
    https://bugzilla.mozilla.org/show_bug.cgi?id=730040#c21
    Please read that bug I linked you to and let me know if the last comment in the bug solves your problem. Apparently the problem is about the addon .xpi file being read-only. Try right-clicking it, going to Properties and unchecking the "Read-only" attribute box at the bottom of the dialog. Click Apply, then OK.

Maybe you are looking for

  • BUPA creation from customer and Vendor Master data in R/3 - Urgent!!

    Hello All, Firstly I am posting this query in this group to figure out a way to achieve this functionality of integration and moving Business Partners. <u>Requirement: </u>On creation of every Customer or Vendor in R/3 we need to create a Business Pa

  • How can I make the status bar hide automatically when using safari?

    How can I make the status bar hide automatically when using safari?

  • SAX problem(plz see the code given)

    hi all, i am using SAX parser for validating my xml file against the dtd,i am getting some errors that i am not able to make out.cud u plz help me.i am sending u my files. ------------------------java file------------------------------------ import j

  • Field Dominance problem and questions

    I am trying to capture 24p Advanced DVCAM material. I've been using the easy setup. I've tried test captures of about 15 seconds (using capture now) which come into FCP with a field Dom. of NONE and load into my 23.98 sequence timeline with a olive g

  • I cannot view anything in 'My Pictures'

    'Windows Picture and Fax Viewer' seems to have deleted itself meaning i cannot view anything in 'My Pictures'. Have tried system restore a few times with no luck and cannot find any way to reinstall it from the microsoft website. Any ideas how i can