Modifying the default alarm?

The new default alarm option is exactly what I need, but in the preferences it only lets you specify how many minutes ahead of the event it occurs. The default seems to be "Message with sound" which I'd like to change to just "Message". Anyone catch something I missed?

I am also having the same issue. When I create a new "to-do" it defaults to the day before @ 11:45pm. How is this default changed?

Similar Messages

  • How do I modify the default alarm?

    I hate it that the default alarm is set to sound an alert.
    I work in music production and I dread the next hoot.
    How do I set the default alarm to silent?
    pete

    nobody?

  • How do you set/change the default alarm TYPE in iCal?

    I like to think I'm a power user, but this one I just can't figure out.  The question/problem is: How do you sent the default alarm TYPE in iCal?  The problem is illustrated in the picture below in the blue circled area.
    Specifically, whenever I set a new event in iCal, it defaults to this window with the default alert being "Default (1 hour before)."  The one hour before is fine, but the problem is, WHAT is the default?  It seems to be just a sound, but that's not good enough to actually alert me of anything.
    The goal I'm trying to achieve with this post is to determine how to CHANGE the "default" new event alert FROM "Default (1 hour before)" TO one of two alerts that I actually find useful:  I want MY "default" new event alert to be either "email" to the primary address, OR, "Message with Sound". 
    Any ideas, folks?  Thanks.

    Understand.  I am in the edit mode for my contact.  I see all the contact info.  There is no right click or other means to change the DEFAULT address that autofill uses (it also is first to appear if I type my name in an e-mail). For instance for a group e-mail you can change the default addresses of each contact by control-clicking on the group in Address Book. I can't seem to make the default change in my v-card.

  • How do you modify the default Execute thread count in Weblogic Server 9.2?

    How do you modify the default Execute thread count in Weblogic Server 9.2?
    How can you tune the starting number of weblogic.ExecuteThread on server startup and/or set minimum number?
    Is there an option from the console?
    Please let me know.
    Thanks

    Self tuning will automatically manage the threads but however you can still control the min and max by adding the min and max values for each instance either directly adding in config.xml or through JVM settings
    1) Modifying the config.xml
    Just add the following line(s) to each server definition :
    <server>
    <name>AdminServer</name>
    <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min>
    <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max>
    </server>
    2) Adding some JVM parameters
    It's safer the following way :
    add the following option in your command line : -Dweblogic.threadpool.MinPoolSize=100
    Regards
    RR

  • How modify the default page from jdeveloper

    I´m trying set a aplications server whit jdeveloper, but i can´t find a configuration file, to modify the default page showed in http://localhost8080
    can you help me ???

    Thanks Maxi... I explain you, I'm trying to set a webservice whith JDeveloper 11g to simulate 3 layers, a computer whit windows system it will be the front end or first layer, and the second computer whit linux system it will be the second( coordination layer) and third layer ((data base layer)), and , my question is this; Jdeveloper has a server aplications like apache ??? where I can set a default page whith a JSP to connect the first layer whit the layer that has installed the linux system.
    Thanks.

  • Can i change the default alarm sound on Iphone 4s

    Can the default alarm sound be changed for new alarms. My mother got an Iphone 4s recently and she can use Siri to set alarms for her, however the default alarm sound is always chosen and that is just not a loud enough sound. And it takes a some messing about to change the sound of the alarm and my 60 year old mother has trouble with changing it.
    Is there any way i can make it change perminently, any help would be much appriciated.

    The default alarm sound is the last sound you used.

  • How can I modify the default styles or create new ones in pages for IPad?

    Hi, I have recently bought the pages for IPad App. It is nice, but I wonder How to modify the default styles or create My own ones...Can anyone help me?

    Unfortunately, pages on the iPad does not support editing styles. The mac version is an extremely powerful piece of software (I know someone who has recently completed their PhD thesis in it), but the iPad version has only a fraction of the features.
    The only word processor for the iPad I'm aware of that fully provides support for styles is UX Write - see http://www.uxproductivity.com (disclaimer: I've been involved with the development of this app). This is designed for the sort of high-end professional authoring tasks that you can do with Pages for Mac. Customisable styles are one of the most fundamental aspects of this app, and it provides extensive formatting options and the ability to define your own, new, custom styles.

  • How can I change the default alarm for events in ical?

    How to change default alarm

    I've been curious about this issue as well. I think it would be nice if there were more options to select the default alarm... from within the preferences themselves. Even being able to choose how many days before vs. always figuring out how many minutes are in multiple days.
    While someone has found a method for changing the sound to accompany messages, users are still not able to select the type. I prefer message only (no sound), although I supposed this is the same as the current default minus any sound. I tried blank and "" entries for 'Default alarm sound' in the .plist file with no success (blank reverts back to Basso, and "" just didn't work).
    I wonder if there are some other items that could be listed in the .plist file to offer more choices such as "Default alarm type". Is there a way to figure out what key variables/values iCal uses for? Someone must have figured out that iCal will look in the .plist file for a 'default sound value'. I'm guessing that there are more of these values that could be set by the user.
    A similar question - it would be nice to be able to set the default alarm time for all-day events. I suppose it doesn't matter all that much since 11:45pm probably means I'll just get the message the next morning; I still guess I'd prefer something like 8am though.
    Forgive the novel...
    -John

  • Can you set the default alarm to be an email alert?

    Just curious. I noticed that in the preference window, it allows you to set a default alarm that always starts as a sound.
    Any plug-ins that will do this?
    Thanks a bunch.

    Try this add-on so you can schedule the sending of multiple emails:
    https://addons.mozilla.org/en-US/thunderbird/addon/send-later-3/
    http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
    There's another add-on that might work in current TB versions:
    https://addons.mozilla.org/en-US/thunderbird/addon/blunderdelay/

  • How to modify the default settings of the Table View

    Hi,
    I saw that in the Coloum Properties Popup under the tab Column Format I have 2 different option (and one default) for the "Value Suppression". I have to check the "Repeat" choice for each report I've done, but, of course, I don't wanna do it manually ...I could get crazy!!
    Is there any way to set the "Repeat" option as default?
    Thanks,
    Nazza
    Edited by: user641641 on 16-Oct-2008 04:19

    the mail send by webmail will enter the channel from
    "tcp_intranet" by default,could i change these mail
    enter from other channel?I suppose that might be possible. Why would you want to do this?
    Please be a little more detailed about what "some checking" actually means.
    i want to do some checking for those mail,but i can't
    set the rule to "tcp_intranet" because some mail that
    come from others MTA will enter from tcp_intranet
    channel also.so i have to modify the webmail's
    default channel.
    but don't how to do it ,and any other way can do it
    thx~!I would handle it this way:
    1. Create a new smtp listen on another port. This is done in the dispatcher.cnf Associate this port with whatever new channel you like.
    2. Set webmail to connect to that port.
    3. Create your new channel, say, "tcp_webmail" in imta.cnf
    4. Add rewrite rules, similar to the tcp_intranet rules that are already there.
    run:
    imsimta cnbuild
    imsimta restart
    when you're done editing the files.

  • Problem with modifying the default design print layout

    hello to everybody
    i would like to ask you something about the design print layout.
    i actually have made a draft payment by using the payment wizard. i have already saved it and by clicking the print layout some of the columns do not appear the the data in there.
    to be more specific...i used the default print out generated by the system and modified it by adding some more columns such as name o business customer and bank account.
    before adding the above fields, the print out was excellent(the default one generated by the system)
    by adding the above fields, some of the columns such as code of bp and name of bp do not appear in the prinout layout except of the last records which is desplayed as it is.
    i have to mention that by removing the field bank account(i have mentioned it as database) alla the records of the payment wizard appears as is but by adding the bank account column, only the last record appears to be with data
    thanks in advance!

    how is it possible to edit the system pld and to display the desired data only for the laast record?it is strange!
    i have 5 payments to do. by checking the system 's PLD the data are fine. by adding my own fields(bank account) the row of the first 4 records do not appear at all(they are empty) except of the last one which is appeard with the desired information

  • Modifying the Default Result Set on the Results Tab of the SQLWorksheet

    I have found the previous posts indicating that the default result set size is 50, that it is not currently able to be modified and (good news) that an enhancement will be coming to correct this.
    I thought I would give my two cents on how this option might be configured:
    Either in the 'View-Options-(output options)' or the 'Tools-Preferences-Environment' areas, have two options. The first would be something like "Max Rows to Display in Results Window" and the second would be sometihng like "Max Rows to Load when end of Current display is reached."
    The first option is certainly most essential, but the latter option I have to explain a little. Say you set your max rows to display to 500. You scroll (drag bar, arrow down, etc) to record 501. At this point, the setting on the "Max Rows to Load When End of Current Display is Reached" option comes into play. This setting will then be read to determine how many rows are to be loaded each time the user gets to the current end of display. The second option adds some flexility to how data rows will be displayed after the initial data rows are loaded.
    You could just default the number of rows added to the display to the setting set in the "Max Rows to Display in Results Window" setting, although I would say that this would be less flexible. Whatever you do, don't follow the Toad example of loading ALL records when dragging the vertical bar to the bottom of the display grid.
    Thank You for your time.
    Scott Lips

    I like the idea.. please post this on the sister website so that people can vote on it.
    http://sqldeveloper.oracle.com/

  • Modify the default framework page

    Hi all,
    I need to create a new portal framework page. This needs to differ from the Default framework page only in the KM navigation links. I have a different KM folder to point to in the new framework page.
    I tried creating a separate page with my KM navigation iview and adding it to the desktop inner page. But this didnt help, because i now have the new KM links, that I added to the navigation panel of the desktop inner page + the old links in the content area( that is what I think) .Anyway both the KM links are now visible side-by-side.
    Can someone tell me how to modify only the KM navigation links in the default framework page?
    -Ashwini.

    Hi Ashwini,
    So as per your reply I guess you already have an iView ready which you want to place on the navigation panel.
    Ok, it goes like this:
    1. Copy the Default Framework Page from Portal Users -> Standard Portal Users into your own development folder.
    2. Open the copied page for editing. Select Desktop Inner Page. And click on Open. In the Page Content you'll find an iView for Dynamic Navigation. Uncheck the visible check box next to it.
    3. Add your own developed iView to this Page. You can do this by right-clicking on your iview and then say "Add iview to Page Delta Link". Make this newly added iView Visible and fixed.
    4. To make sure it appears correctly, click on the Page Layout radio button and see that the iviews are arranged correctly. If required you can drag and place them wherever you wish.
    5. Now, you need to make a desktop which consists of a Framework + theme. To do this go to System Admin -> Portal Display.
    While your desktop is in edit mode. Right Click on your framework which you edited and Say "Add framework to Desktop". Down below you will find a themes folder. Add any theme in the same fashion to your desktop.
    Next go to Portal Administrators -> Super Administrators -> Master Rule collection.
    Here you have to put you rule. Its self explanotory.
    But make sure you do this correctly.
    That does it.
    Please let me know if I answered your question.

  • Modifying the default .pdf presets

    Using CS3
    I've made my own preset for saving .pdf proofs from Illustrator. However it always defaults to the 'illustrator default' .pdf preset.
    Is there a way to either;
    - Make my preset the default so that I don't have to select it every time.
    OR
    - Modify the existing 'illustrator default' preset to be my own settings permanently.
    99% of the time I'm using my preset and it sucks having to go to the dropdown every time and choose it.

    Record an action, it remembers the preset you chose. I like to send mine to the desktop, and then I put them in the correct folders afterwards.
    Tip: I record a save prior to teh save as pdf, so I don't accidentaly make a pdf and not save my revisions to the .ai file. I do get a false positive saying that save is not available (if this has already been saved) but to me that is worth not losing track of work/revisions.
    The action is fast, and occasionally crashes illustrator sometimes(have found this true on different computer at different agencies I work at), so set your flyout menu playback settings to 1 sec delay.

  • How can I modify the default jsf template

    Hello everyone,I don't like the default jsf template in jdev.I want to change it to this:
    <%@ page language="java" pageEncoding="GB18030"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
    <%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af" %>
    <%@ taglib uri="http://xmlns.oracle.com/adf/faces/html" prefix="afh" %>
    <f:view>
    <afh:html>
    <afh:head>
    </afh:head>
    <afh:body>
         <af:form>
         </af:form>
    </afh:body>
    </afh:html>
    </f:view>
    how can i do this?In eclipse,I can modify a file to do this.

    Refer
    http://technology.amis.nl/blog/?p=1405

Maybe you are looking for