Modifying the format of standard form for transaction PP40

Hello gurus,
I want to modify the format of the standard form HR_ALL_BUCH for training and event management section of HR. For this i know that i have to copy the standard form into a z-form. So i copied the form and named it as ZH_ALL_BUCH. Now i am able to change the contents of the mail but i cannot reposition the windows. The section where we put the height and width of window is looking grayout even if i open th form in change mode. How can i reposition the windows?
Regards,
Yayati Ekbote

Hello,
I solved my problem myself. The original form was in german language. so while opening the form in change mode, the language of the form should have been 'DE' and not 'EN'. So i set the language as 'DE' and the form windows were repositionable. Thanks.
Regards,
Yayati Ekbote

Similar Messages

Standard prgram and the standard form for the AR Bill of Exchange

I need to configure AR Program for Bank bills and Bill of Exchange. This configuration is for France.
Can you let me knoe the standard prgram and the standard form for the same.
Regards,
Senthil

Hello,
You can refer to the below sap help link whcih describes about the Bill of exchange understanding in sap
http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FI-AP-AP-BE.pdf
http://help.sap.com/saphelp_45b/helpdata/de/e8/f0c10a0a6911d294f200a0c929f4c9/frameset.htm
Alternatively you can also check the customizing settings for the BOE which details on the settings needed foractivating of BOE
hope this helps
regards,
radhika

Standard form for ECS in FI module.....?

Hi all,
Please provide if there is a standard form for Electronic clearing system(ECS) in FI and the corresponding print program...
thanks

Hi,
as per your requirement Tcode -VA21 standard script name is RVORDER01 if u want change as per your requirement copy it as Zform then modify it . and according to ur printform give name in NACE Tcode ...
<REMOVED BY MODERATOR>
thanks,
Suresh.
Edited by: sriratna nainala on Feb 15, 2008 4:12 PM
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 2:55 PM

Standard form for quotation

Hi friends,
Can anybody give me the name of the standard form for printing quotation??
Thanks in advance.

Dear,
There is no standard transaction code for quotation printing.
we can get the print through va22 or Va23, from menu bar------->select sales document-> issue output to.
You want mass printing , go through Z-Development.
Thanks
Narasimha

Standard Form for Service order.

Can any1 suggest me which standard form for service order?
otherwise should I go for New one? pls guide me..

If it is PM module then no need to go for that long path you can configure it in the OID1 transaction .
If it is PM module you cant develop smartform you need to go for script only.
As Wing mentioned try PM_COMMON script . Even I have worked on PM module but developed my own form
Regards,
Nageswar

Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)?

Hi,
Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)? Can you please help me?
Venkatesh

hi,
there are standard ISR Adobe forms (interactive) to my knowledge, which you can customise at your convenience.
kindly check at <a href="http://service.sap.com/adobe"></a>.
more precisely, go here
<a href="https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000478323&">Interactive Forms Delivered by SAP Solutions</a>
Do update the forum reg your findings.
Thanks and Regardas,
Anto

I need the names of standard smartform for FI module.

i need the names of standard smartform for FI module or if possible if one can provide the smart form for FI - CML & FI - CFM module (new module introduced).

Hi,
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Regards,
Bhaskar

Standard Form for Customer Quotation in PS

Hi All,
Can anybody tell me Standard Form for Customer Quotation in Project System (PS).
Its Urgent.
Regards,
Sachin Bhatnagar.

Hi,
as per your requirement Tcode -VA21 standard script name is RVORDER01 if u want change as per your requirement copy it as Zform then modify it . and according to ur printform give name in NACE Tcode ...
<REMOVED BY MODERATOR>
thanks,
Suresh.
Edited by: sriratna nainala on Feb 15, 2008 4:12 PM
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 2:55 PM

How to modify the ni 9237 example code for 3 9237 modules

I am wanting to modify the ni 9237 example vi(for only one module) for three 9237 modules.
I have tried several approaches but it does not seem to work well.
Your help is greatly appreciated.

There are my files. Thanks in anticipation. This code is modified for only 2 ni 9237 modules. I bet it would be a logical extention upon making it work for 2 modules.
Enoch
Attachments:
NI 9237 Getting Started (FPGA).vi ‏148 KB
NI 9237 Getting Started (Host).vi ‏459 KB
NI 9237 Getting Started.lvproj ‏46 KB

Can't modify the format of a row

Hi,
I'm trying to change the format of a row but it's impossible. I select a background color but after saving the changes I close the workbook and I open it again. The changes I made disappeared. The format of the row is the same before modifying it.
I think the worksheet is protected, but I don't need to introduce any password. I know Excel protects the cells by default (I know it because when I select format cells --> protection tab by clicking right mouse button I see the blocked check box selected) but I don't know what is the meaning exactly, because in my workbook I can change the content of a cell or row but no the format (for instance background color).
Why I can't change the format of a row?
Thanks.

Hi
It sounds as though you are not the owner of the workbook but that it has been shared with you by someone else. If this is the case, you will not be permitted to permanently change the formatting, although you will be permitted to change them during the session.
Could this be the reason? If not please let us have some more information such as:
What version of Discoverer are you running?
Desktop or Plus?
Apps mode or standard mode?
As an FYI, there is no Discoverer feature that locks a row from being formatted. It's possible that you don't have the format privilege though although this would stop you formatting anything.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Standard Form for SAP ECM

Hello Everyone,
1) Iam New to Interactive forms by Adobe.I want to use this for SAP Engineering Change Management Process.
    I heard that there will be a standard form available in Out of the Box SAP.
    Can someone guide where can i find the Standard form in SAP system.
2) In Configuration side(Tcode spro) for Engineering Change Management where do i need to configure to activate these forms.
3) What are the system prerequisites(Any specific Licensing required) to use Adobe forms.
Any information related to this or any suitable links where i can get relevant information will be appreciated.
Regards,
Praveen.

Hi Praveen...
First You have to Install this...
prerequisites to use Adobe Forms in SAP
Configuration
SAP NetWeaver 6.40
Java Stack installed
Adobe Document Services (ADS) installed on the Java Stack
Adobe LiveCycle Designer 7.1 is installed on your machine ( Desktop / Laptop)
Adobe Reader 7.* is installed
Transactions in SAP Engineering Change Management
CC01         Create change Master.
CC02         Change change Master.
CC03         Display change Master.
CC22         Change Object Mgmt Record: Initial Screen
CC23         Display Object Mgmt Record: Initial Screen
CC11          Create Material Revision Level
CC12         Change Material Revision Level
CC13         Display Material Revision Level
CC15         Change Document Revision Level
CC16         Display Document Revision Level
CC31         Create change request.
CC32         Change change request.
CC33         Display change request.
CCUNDO Undo changes with Engineering Change Management ( Available from SAP ECC 6.0)
CC07         Engineering Change Management Information System
CC05         Change Overview
CC60         Change Hierarchy
DSAL         Log for Digital Signature

Standard form for payment order creation

Hi,
I got a requiremnt to create a form for payment order creation,
can one plzzz guide me, do v hav any standard form available in sap, n also let me know the program for it.
Regards
ashwini

Hi Aswini,
FPY1_CH_DTA_EZAG
FPY1_CH_DTA_LSV
FPY1_DE_DTA
FPY1_DE_DTA
FPY1_DE_DTAZV
FPY1_DE_DTA_ZZV
FPY1_DE_DTA_ZZV
FPY1_DE_EURO
FPY1_DE_EURO
FPY1_FR_BANQUE
FPY1_NL_DTA
FPY1_NL_DTA
FPY1_NZ_MTS
FPY1_NZ_MTS
check these forms
Regards,
Venkat

Standard form for printing production order

hi experts,
             i need the standard script for printing production order.

Hi
Check out this Forms
PSFC_DOC_LINKS   Print production order
PSFC_PRINT_LAY    Production order printing
WE_FERT_VERS2    GR slip for production order
Reward Points if it is Useful.
Thanks,
Manjunath MS

I am trying to download a form to fill in and it appears in Windows wordpad and there are milions of random characters which |I have to delete before I get to the text and then the test isn't in the format of a form to fill in. Help!!!

when ever I try to download a form to fill in, the default is windows wordpad and then it appears with millions of characters which I have to delete before getting to the text which is not in the style of a form to fill in.
How can i get it to download the form as it is?

What kind of code do you see?
Is that an HTML file or a PDF file for the Adobe Reader?
*https://support.mozilla.com/kb/Using+the+Adobe+Reader+plugin+with+Firefox

How do I modify the "Number of Pages" setting for an existing Master Page via javascript?

I'm learning javascripting for InDesign and I have been tinkering with the stock scripts in the tutorials. I'm developing the ability set properties and such, playing with how Javascript works, and I wanted to change the number of pages in a master page as part of an exercise. Does anyone know how to do this? I have been able to add new masters, controlling the number of pages in them with this:
myDocument.masterSpreads.add( {pagesPerSpread:2,} )
but what I really want is to modify the master that InDesign automatically generates with a new document, to have 2 pages. Granted, I can just start off with a document with facing pages, but I don't really see the fun in that...

Jump_Over wrote:
Hi,
check this:
var mSpread = app.activeDocument.masterSpreads[0],
count = mSpread.pages.length,
mSet = 2,
run = mSet - count;
// to avoid 0-page error
mSet = Math.max(mSet,1);
if (run > 0) {
          while (run --)
          mSpread.pages.add();
else while (run) {
          mSpread.pages[-1].remove();
          run ++
edit the variable mSet to modify pages length
Jarek
Message was edited by: Jump_Over I added Math.max filter to avoid errors
Thanks, this is exactly what I wanted. Well, almost. I wish there were a way to simply set the number of pages in a master spread to a specific number the same way there is in the interface, but this will work just as well.

Modifying the format of standard form for transaction PP40

Similar Messages

Maybe you are looking for