Modifying the goto URL - load balancer configuration

Hi,
I am trying to find the location of the display.template which I can modify to change the "goto" parameter URL.
Objective:
When I hit my loadbalancer URL "http://172.11.124.23/portal"
It basically can forward the request to ports 8080,8081 or 8082.
but I see the following in the browser after the redirection
http://myportal.domain.corp:8080/amserver/UI/Login?goto=http://172.11.124.23/portal/dt
instead of
http://myportal.domain.corp:8080/amserver/UI/Login?goto=http://myportal.domain.com/portal/dt
so basically I get the acess manager login page but after authentication it goes back to the loadbalancer since the goto URL is'nt right.and load balancer again sends the request back to access manager.So it kinda loops back and forth betn load balancer and access manager.
I read on the forum which says display.template should be modified to correct the goto URL.
I am working in linux env.I tried changing the display.template at the following location but I dont see what I want.
/var/opt/sun/portal/portals/portal1/desktop/default/LoginProvider
Can you point me in the right direction.!
Thanks,
Deepak.

c'mmon guys...help me..its urgent !!!!

Similar Messages

  • URL Load Balancing through Web Dispatcher

    Dears,
    We are facing heavy load on our portal server.
    We are planning to installed one J2ee Dialog instance for it.
    Please suggest how can we configure Url Load Balancing through Web Dispatcher.
    Regards,
    Shivam

    HI Shivam,
    While installing webdispatcher you provide Hostname and http message server port of j2ee of CI .
    So , webdispatcher communicate directly with message server, where message server check which application server is free and hence forward the request to that specify application server of j2ee instance.
    Pls find the below link for configuring webdispatcher
    http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/content.htm
    Thanks
    Anil

  • Problem in Hyperion FDM Load Balance Configuration...

    hi all,
    I installed hyperion essbase, planning, Hfm and Fdqm 11.1.1.3 version.
    but i am getting error at configuration of fdm load balance configuration....
    error: when i click on Test Connection in authentication Providers(Shared services(CSS))..am getting error as Cannot create ActiveX Component
    Please give me reply if u know about this Issue.
    regards,
    Mady

    This error indicates that the COMJNIBRIDGE dcom object is not able to launch successfully or has not been registered properly on the FDM application server:
    a) Start > Run > DCOMCNFG
    b) Expand Component Services > Computers > My Computer > DCOM CONFIG
    c) Locate the COMJNIBRIDGE object, right-click and choose "properties"
    d) Click on the identity tab and choose "This user" and browse for the FDM Service account and enter/confirm the password
    e) Re-test

  • FDM Load balancer Configuration issue

    We are doing the installation for Hyperion Planning, ODI and DRM on DEV environment
    The EPM version we are using - 11.1.2.2
    Server 1 (Windows 2008 x64)
    Foundation Services
    Calculation Manager
    Planning Web Application
    Analytical Provider Services
    Essbase Administration Services web application
    Oracle HTTP Server
    Server 2 (Windows 2008 x64)
    R & A Framework Services
    R & A Framework Web Application
    Financial Reporting Web Application
    Web analysis Web Application
    Server 3 (Windows 2008 x64)
    FDM
    EPMA
    ODI
    DRM
    Essbase Integration Services
    Essbase Studio
    IIS 7.x
    Server 4 (Windows 2008 x64)
    Essbase Server
    Server 5(Windows 2008 x64)
    SQL Server 2008
    All our services are running fine for Planning. We are in process of configuring FDM.
    FDM Application Server Configuration is completed.
    While doing FDM Load Balancer Configuration, we also able to connect to Shared Service directory successfully. But when we click ok to complete the configuration it gives following error -
    Unable to Create Load Balancer Object!
    Please verify that the user name, password, and domain are correct
    Error=Cannot create ActiveX component
    When checked in Event Log we found -
    Unable to create Load Balance Manager object! Configuration directory could not be located. Error=-2147023878 - Retrieving the COM class factory for component with CLSID *{E652643D-6CC1-48AC-915D-01842B04F292}*
    Source=TaskManagerService - at TaskManagerService.TaskItem.fGetConfigFolder()
    We tried the below steps but issue still persists -
    •     Start the ‘dcomcnfg’ tool in Windows
    •     Expand Component Services\Computers\My Computer\Dcom-Config and locate the following object: {E652643D-6CC1-48AC-915D-01842B04F292}
    •     Right-click and choose "Properties" and click on the "Security" tab
    •     Click the "Edit" button and remove all users except the default: "Everyone" and "System" and click OK, then set the radio button to "Use Default"
    •     Click the "Edit" button under Access Permissions and remove all users/groups except the default items and click OK, and set the radio button to "Use Default"
    •     Now click the "Identity" tab and remove the ID in the "This User" field and set the radio button to "The Launching User" and click "Apply" and "OK"
    •     Now try to launch the FDM Load Balance Config and all the extra tools for FDqM
    We are using hypadmin as domain account but it is part of Administrators group on FDM Server (Server 3). The administrators group is also part of -
    Act as part of the operating system
    Bypass traverse checking
    Log on as a batch job
    Log on as a service
    Please let us know in case if you encountered similar error on this version and possible solution for the issue.
    Thanks in advance.
    Regards,

    I woudl clear out all users/groups on the security tab of the FDM Load Balance Server DCOm object for "Launch and Activation" and "Access" permisisons and then set the identity to the "Launching User" radio button and apply. Then re-set the config.
    If that still fails, try rebooting the server and then set it.
    Make sure the domain and password are also correct that is being entered.

  • Which cluster attribute should you modify to ensure that load balancing and

    An EJB is targeted to a cluster. Remote EJB clients can therefore take advantage of WebLogic Server’s load balancing and failover capabilities.
    However, a proxy server exists between the clients and cluster, which performs IP address transaction.
    Which cluster attribute should you modify to ensure that load balancing and failover work correctly?
    A. Multicast Address
    B. Persistent Store
    C. Cluster Address
    D. Migration Basis
    E. Replication Channel

    http://docs.oracle.com/cd/E13222_01/wls/docs81/config_xml/Cluster.html
    Cluster address

  • Help choose the appropriate etherchannel load balance method

    Hi
    I have 2 network architectures :case A and case B  (found architecture below)
    Case A : one server connected on the switch on each site
    Case B : 3 server connected on the switch behind a router on each site
    2 site are connected by 2 wireless link :each wireless link have 105 Mbps bandwith (I absolutly need the agregate bandwith 210)
    Site headquarter is the principal site and site backup is use to backup data located on the principal site
    I use Gbit cisco  2960 switch
    I use etherchannel to agregate the 2 switch port (port 1 and port 2) where the 2 wireless link are connected
    I configure src-mac for case A but all trafic is send only on one wireless link .
    Please help me to choose the more appropriate load balance method to load balance traffic between the 2 link for the case A and for the case B
    Please advise
    Thanks in advance

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Your Case A might be handled by port hashing, but unfortunately most Cisco platforms don't support it.
    Your Case B isn't much better, as you only have 3 hosts on each side, and according to your drawing, they are behind routers, so you don't want to use MAC hashes.  If you don't have port hashing, next best choice might be src-dest-IP hashing.  Again, though, with just 3 hosts, your distribution will likely not be very balanced, especially over shorter time intervals.
    To obtain best utilization of your links, you need some kind of better link bonding, such as MLPPP (unfortunately, usually won't scale to FE rates) or a hardware MUX.  Next best option, if you could route across the links, would be something like Cisco's OER/PfR which can dynamically load balance.

  • Hardware Load Balancing Configuration and Session Clustering

              I would like to know where I can find any information on Hardware Load Balancing
              Configuration in order to leverage WLS HTTPSession clustering.
              Don Ferguson mentioned white papers on this subject however I can't seem to locate
              them.
              I am particularly interested in Cisco's 11000 Content Service Switch.
              Thanks.
              Mike Jones
              

    Scroll to the bottom of this link. It discusses how to configure Alteon and Big-IP.
              The principles should apply to Cisco as well, but we don't have documentation on
              configuring it, as far as I know.
              http://e-docs.bea.com/wls/docs61/cluster/index.html
              -Don
              Michael Jones wrote:
              > I would like to know where I can find any information on Hardware Load Balancing
              > Configuration in order to leverage WLS HTTPSession clustering.
              > Don Ferguson mentioned white papers on this subject however I can't seem to locate
              > them.
              > I am particularly interested in Cisco's 11000 Content Service Switch.
              >
              > Thanks.
              >
              > Mike Jones
              

  • Add parameters to the "GOTO" URL

    Hi,
    We would like to use the "GOTO" URL functionality with additional paramters (e.g. report name, customer name, sales value).
    As far as we checked the only parameters which we can add to the URL are the varibales of the report.
    Does anyone knows how can it be done?
    Or have other solution option.
    Alon

    Create the Jump target as a Web address, then form the URL in the template with all the required parameters. Report name and filter values you will be able to get from the text elements.
    Thanks.

  • What is the concept of load-balancing

    Hi All,
    can any one explain me the concept of load-balancing
    Thanks.

    In simple words, when one server within a load-balancing setting (where more servers are able to run the same process) has too many requests to process, it will off-load a number of those requests to other servers in the same setting. This will be done in a way that it will be transparent to the final user, meaning that the user who has made the request does not know or perceive which server has processed his request.

  • How can we modify the distination url while migrate the personalization

    Hi All,
    I got the requirement to create a link in iSupplier home page. I have created the link using oa framework personalization and set the destination URL with the third party's test instance URL. It is available in test instance and the third party url is also the test instance url . I have to move this personalization to production. In production the same link has to open the third party's prod instance only. But i am little bit confused, how can we modify the detsination url in the personalizaed the document.
    Please suggest me if there is any generic way of modifying the link url while migrating the personalization from one instance to another instance.
    Thanks in Advance..
    Regards,
    Purushoth

    Hi,
    ---Its nt possible via personalization go for co extension
    Im not sure but pls try with below approach.
    ---In co get the webBean of OALinkBean and setDestination URL in code.
    if(Prod)
    setdestinationURL("");
    if(Testing)
    setDestinationURL("");
    Regards
    Meher Irk

  • A question about the SharePoint services load balancer

    Let's consider a farm with one WFE and two app servers, A and B. Both app servers are running the Managed Metadata Service (MMS). 
    User requests a page from the WFE, which talks to the database server. The operation needs information from the MMS, so the WFE requests information from the round robin load balancer for SharePoint web services. Let's say server A is down. 
    Here's my question - what happens next?
    a) The round robin load balancer tells the WFE the MMS is on servers A & B. The WFE tries server A, fails, and returns a failure. 
    b) The round robin returns servers A & B. The WFE tries server A, which fails. The WFE then tries server B.
    c) The round robin returns either A or B, depending on which is next in rotation. The WFE tries the server returned. If the server returned is A, the WFE returns a failure. 
    d) The round robin returns either A or B, depending on which is next in rotation. The WFE tries the server returned. If the server returned is A, the WFE queries the round robin service again.
    e) The round robin knows server A is down, returns only server B to the WFE. 
    Philo Janus, MCP Bridging business & Technology: http://www.saintchad.org/ Telecommuter? http://www.homeofficesurvival.com/ Author: Pro InfoPath 2007 & Pro InfoPath 2010 Pro PerformancePoint 2007 Pro SQL Server Analysis Services 2008 Building Integrated
    Business Intelligence Solutions

    When a Service Application is down, the application load balancer removes that endpoint from the load balancer. When it becomes available again, it adds it back. This way the WFE would just contact the MMS endpoint that was available, not try and timeout
    against an unavailable endpoint.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • URL Load balance

    Hi,
    I have CSS in single arm deployment model. I want to do the load balance following URL.
    http://irs.abc.com/irs.htm
    I have configure the following steps
    service IRC_1
      ip address 192.168.17.12
      keepalive type tcp
      keepalive port 80
      active
    service IRC_2
      ip address 192.168.17.14
      keepalive type tcp
      keepalive port 80
    service IRC_DR
      ip address 192.168.10.37
      keepalive type tcp
      keepalive port 80
    group TEST_IRC
      add destination service IRC_1
      add destination service IRC_2
      add destination service IRC_DR
      vip address 192.168.200.58
      active
    But when I m configure the content rule it is showing following error
    content IR_URL
        protocol tcp
        port 80
    url "http://irs.abc.com/*" 
    %% Unsupported or invalid content rule URI
    Please let me know how to do this. Also is there anything further to configure to achive the load balancing.
    Thanks in advance.

    Hi,
    I have tried with 9000 but no luck. Even the web page is coming up with error. Below is the configuration
    service IRC_1
      ip address 192.168.17.12
      keepalive type tcp
      keepalive port 80
      port 9000
      active
    service IRC_2
      ip address 192.168.17.14
      keepalive type tcp
      keepalive port 80
      port 9000
    service IRC_DR
      ip address 192.168.10.37
      keepalive type tcp
      keepalive port 80
      port 9000
    CSS01# show service summary
    Service Name                     State     Conn  Weight  Avg   State
                                                             Load  Transitions
    ITSMWEB_1_HTTPS                  Alive         0      1     2            0
    ITSMWEB_2_HTTPS                  Alive         0      1     2            0
    ORALCE_PRD1                      Alive         3      1     2            0
    ORALCE_DR1                       Down          0      1   255            0
    ORALCE_PRD2                      Down          0      1   255            0
    IRC_1                            Alive         0      1     2            4
    IRC_2                            Suspended     0      1   255            2
    IRC_DR                           Suspended     0      1   255            2
    end of buffer
    CSS01# show rule-summary
    VIP Address     Port  Prot Url                CntRuleName    OwnerName Stat Idx
    192.168.200.95  80    TCP                     TP        GIT  Act  5 
    192.168.200.58  80    TCP  /*                 IRC       GIT  Act  9 
    192.168.200.65  Any   Any                     EFAX      GIT  Act  2 
    192.168.205.28  8002  TCP                     ORACLE_DEV GIT  Act  6 
    192.168.200.106 30005 TCP                     ITSMAPP   GIT  Act  3 
    192.168.200.105 80    TCP                     ITSM_WEB  GIT  Act  4 
    192.168.210.57  80    TCP                     XPENAPP  GIT  Act  1 
    192.168.200.101 443   TCP                     ITSM_HTTP GIT  Act  7
    I can telnet real server 192.168.17.12 on port  9000.
    I have also capture the packet while access the real server with success and caputre on VIP which shows error.

  • Office Web Apps Load Balancing Configuration Issue for SharePoint 2013

    I have load balanced servers dedicated for Office Web Apps with name “md1xxxwfe1” and “md1xxxwfe2” 
    , both this servers are load balanced by CISCO Load balancer. And I have mapped Load Balancer Virutal IP with host name officeapps.jda.corp.local in the DNS records.
     Things are working fine if I add new farm by using New-OfficeWebAppsFarm
     with server name as internalurl in PowerShell console
     as like “  -internalurl http://
    md1xxxwfe1  but when I use –internalurl officeapps.jda.corp.local it is not working at all. I’m not getting what to do at this point.
    I have gone through following blogs but no luck.
    http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
    http://blogs.technet.com/b/office_resource_kit/archive/2012/09/11/introducing-office-web-apps-server.aspx
    http://davidlimsharepoint.blogspot.in/2013/02/installing-and-configuring-office-web.html 
    http://sps2013.blogspot.in/2013/09/office-web-apps-with-sharepoint-2013.html
    The output of the wfe1 server is attached with this. When I open http:// /hosting/discovery in wfe1 I’m getting following result (attached
    screenshot) but it should show hostname rather than server name.
    Please help me
    Thanks, Ram Ch

    Hi  Ram ,
    For  troubleshooting your issue, please take steps as below:
    Just about any load balancing solution will work, including a server that runs the Web Server (IIS) role running Application Request Routing (ARR):Install
    Application Request Routing
    Install the certificate on the load balancer as described under Securing Office Web Apps Server communications by using
    HTTPS.
    Make sure you have configured the cluster correctly for full internet name:
    Reference:
    http://technet.microsoft.com/en-us/library/jj219435.aspx#loadbalancer
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • ACE Load Balancing Configuration For NATed User Traffic

    Hello,
    I am currently working on a requirement where the shared application services will be hosted in DC and these services will be accessed by multiple (thousands) users from different corporates/customers. The user traffic will be hidden behind customer's proxy servers or firewalls so the load balancer (ACE modules) services hosted in DC will not be able to see requests coming in from induvidual users IP addresses.
    In this scenario what are options of load balancing are available in Lyer3/4 and Layer7 ?
    Thanks in advance for your help.
    Sanjay

    Hi Sanjay,
    In a set up where all users are coming from behind a proxy, all users will be loadbalanced to same server thus overloading it. This is when you are doing standard L3/L4 LB.
    In the situation of proxies, for HTTP applications you shall use L7 LB and use information(cookie) in HTTP client request or server response. The ace will use this information to stick the user to same server for persistence. If a client comes with no cookie it will be loadbalanced according to the predictor method configured. Below is the link for L7 configuration example and other TS steps you can take while configuring L7 policies on ACE. For more informatin i would suggest reading ACE user guide too.
    http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_(ACE)_Troubleshooting_Guide_-_Troubleshooting_Layer_7_Load_Balancing
    If you have any questions please feel free to ask.
    Regards,
    Kanwal

  • Load balance configuration for clustering

    we are going to setup multiple servers (clustering) for the BIEE. What configuration needs to be done to make them clustering? And, what is the load balancing alogrithmn behind? Pls help. thks.

    Which articles & documentation have you read already? I don't want to duplicate what they've covered.
    http://catb.org/~esr/faqs/smart-questions.html#beprecise

Maybe you are looking for