Modifying tool features like character size

If I have multiple files open, only for the latest one I have opened, the tool features like character size can be modified. For the files i had opened previously opened and which are still open, suddenly the opportunity to modify the tool features, right after the moment I have open a new pdf-File with Acrobat.
Can that problem be overcome ?
System: Adobe Acrobat 9, Microsoft Windows 7, 64-bit

It is up to Juno to enable Midas, the Rich Text Editor which is built into Firefox, with one little line of code on every web page that has RTE for IE. There's nothing that you can do to turn that feature on your self, it has to be coded on each web page that has Rich Text Editing.
http://www.mozilla.org/editor/midas-spec.html 
http://kb.mozillazine.org/Midas
Their ignorance probably lies with their staff programmers only knowing how to do it for IE ''(their training and certificates are probably from the Microsoft cabal)'', and not realizing that Gecko and WebKit apps each have their own Rich Text Editor's, which require their own small line of code to enable those Editor's.

Similar Messages

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - help?

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?

Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please?

Unable to use all the feature of my email service (Juno on the web) like; font size/color, bolding, italics, highlighting etc why? Those features work through Internet Explorer but not Firefox.

When I go to my Juno on the web through Firefox, I am unable to use the tool features such as:
Font size / Color
Bolding
Italics
Bullets
Highlighting
just to name a few. Yet when I bring it up through Internet Explorer these features work, plus the way Firefox reads my Juno the tabs are distorted (the page is not formatted correctly, I contacted Juno they said I should contact my modem company AT& T they said no so you are my last resort.. Please help resolve my issue, THANK YOU in advance for assisting with this matter.

It is up to Juno to enable Midas, the Rich Text Editor which is built into Firefox, with one little line of code on every web page that has RTE for IE. There's nothing that you can do to turn that feature on your self, it has to be coded on each web page that has Rich Text Editing.
http://www.mozilla.org/editor/midas-spec.html 
http://kb.mozillazine.org/Midas
Their ignorance probably lies with their staff programmers only knowing how to do it for IE ''(their training and certificates are probably from the Microsoft cabal)'', and not realizing that Gecko and WebKit apps each have their own Rich Text Editor's, which require their own small line of code to enable those Editor's.

Hi I am currently subscribed to PS CC but I don't think I have the latest version. I beleive this because I don't get the new welcome screen and don't new feature like the structure and color setting in the content aware patch tool. I have checked for u

Hi I am currently have a subscription to PS CC but I don't think I have the latest version. I believe this because I don't get the new welcome screen and don't have new features like the structure and color setting in the content aware patch tool. I have checked for updates and it tells me I have the current version. I check in PS I have version 14.2.1. I also have CS6 installed on my PC, could this be somehow be doing something or am I doing something wrong. Would anyone have any suggestions.

It's under "Find New Apps". You have to scroll down to see it.

Has adobe adopted the compound math feature like quark has in its interface.

I am currently working with CS3. Has adobe adopted the compound math feature like quark has in its interface.
For instance If I want to duplicate an item 29/6" vertically but I know that that step should be 1/8" short, in quark I can type 29/6-.125, or 29/6-1/8. Either method will give me 4.708333. Same issue when I just want to draw a box a specific size minus or plus 15/64 or an inch. Adobe forces me to look up the decimal equivalent before I enter it or I will get the message: "INVALID NUMERIC VALUE"
This applies to all adobe products I use.
This really slows production down and I hope CS5 allows this now.

Seriously Bob, Seriously. Quark has had this feature for 20+ years.
Quick, do the following, draw a box or a line or anything.
Now move it to here.
2.0416 in +3/64 -7pt -3in -9.7mm
I can type this verbatim in qxd and end up with what I want, I CANNOT do this in any adobe product that I currently use.
There is nothing wrong with my attitude, this is a feature that I use daily in my work and having indd and ill require me to look up decimal equivalents of inch fractions is not productive.
If my priorities do not match your priorities why does that make mine a total mess?
Oooh Gotchew on that one. Gotchew on that one. You have no answer for that.
"Hard to believe all the cool stuff you still can't do with Quark, too."
I don't like one app over another I use both daily but indd seems more stable. If you want to argue Toyota vs Chevy, go ahead. I think one software company should look at competing products and implement functionally positive features in their own.
I suppose to carry my analogy further, Adobe may have added nice features like a sunroof, and power windows but has not added power steering like their competitor has had for 20+ years. I really don't use the "Cool Stuff" in the products I manufacture.
I will waste no more time here and will simply flood the company with this feature request as I have been doing.

How u will set the external parameters like packet size and number

How u will set the external parameters like packet size and number of parallel process.

Dear Karthik,
ALE:
Use Transaction UPSC02 - ALE Distribution Unit: Packet Types.
Performance Optimization for ODS Objects:
To ensure a good ODS object loading performance, take the following into account:
 1. Creating SIDs
The creation of SIDs takes a long time and can be avoided in the following cases by:
 Not setting the indicator for BEx Reporting if you are using the ODS object only as a data store. If you do set this indicator, SIDs are created for all new characteristic values.
 If you use line items (for example, document number or time stamp) as characteristics in the ODS object, in the characteristic maintenance, indicate these as Attribute Only.
SIDs are created in parallel if parallel activation is switched on (see last point). They are then created with the same number of parallel processes as created for the activation.
However, if you specify a server group or a special server in customizing, these specifications are not only valid for the activation, but also for the SID creation. The creation of SIDs runs on the application server on which the batch job also runs.
 2. DB partitioning in active data tables (technical A table)
By partitioning by database level, you can delete data from the ODS object much more quickly. As a partitioning criterion, choose the characteristic by which you want to delete. For more information on partitioning database tables, see the database documentation (DBMS-CD). Partitioning is supported by the following databases: Oracle, DB2/390, Informix.
 3. Indexing
Use selection criteria for queries for ODS objects. If the key fields are specified, the existing primary index is used. The more frequently accessed characteristic should appear on the left-hand side.
If you did not specify the key fields completely in the selection criteria (visible in the SQL trace), you improve the run time of the query by creating additional indexes. You can create these secondary indexes in the ODS object maintenance.
 4. Activation of data in an ODS object
To improve system performance when activating data in the ODS object, you can make the following entries in Customizing under SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Information Warehouse -> General BW Settings -> ODS Object Settings:
 the maximum number of parallel processes when activating data in the ODS object as when moving SIDs
 the minimum number of data records for each data package when activating data in the ODS object, meaning you define the size of the data packages that are activated
 the maximum wait time in seconds when activating data in the ODS object. This is the time when the main process (batch process) waits for the dialog process that is split before it classifies it as having failed.
 the server group that needs to be used when activating the data in ODS objects in parallel You have to create the server groups beforehand using the following path: Tools -> Administration -> Network -> RFC Destination, RFC -> RFC Groups. If you do not specify anything here, then the activation runs on the server on which the batch process was started for activation. If a server from the server group is not active, then the activation is cancelled.
 5. Loading unique data records
If you only load unique data records (meaning data records with nonrecurring key combinations) into the ODS object, then the loading performance is improved when you set the indicator Unique Data Records in the ODS object maintenance.
The records are then updated more quickly because the system no longer needs to check whether the record already exists. You do have to be sure that there duplicate records are definitely not being loaded, because this will lead to termination.
Regards,
Naveen.

EPub feature request: image size relative to margins

In the epub export dialog, we're given the option of exporting images
"relative to page". Meaning (as far as I can tell) that if, in the
layout, the image is 20% away from the left edge and 20% away from the
right edge of the page, then in the ePub it will also be 20% away from
the left edge of the viewing area, and 20% from the right edge.
I think it's important to have an additional option: "relative to margin".
The fact is that in book design, margins play a much more important role
than in ePubs, where viewing area is at a premium. In much good book
design you will find that an image extends only to the margins of the
text area and not beyond (unless of course it's a full-bleed image,
etc.) In ePubs, though, the effective text area is normally the edge of
the device screen (minus a few pixels, perhaps). Thus the edge of the
ePub viewing area is essentially analogous to the text-area margins of
the printed page -- much more so than to the edge of the printed page.
So I, as a book designer, would want an option that says that whenever
an image extends all the way to the text-area margins, it should fill
the ePub screen.
I'm now working on a converting a printed layout to ePub. The images
extend in most cases only to the text-area margins, and the margins
themselves are fairly generous in the printed edition, and this means
that when the images are exported to ePub, they are taking up far too
little screen area, since the only option is to calculate their size as
a percentage of the entire page area ("relative to page").
The workaround is to go through the book enlarging the images so that
they extend to the page edges rather than to the text area margins and
then exporting. But this book has many images.
This superfluous extra effort could be avoided if the ePub export dialog
simply gave the option to export images "relative to margins."
Hope that makes sense!
Thanks for reading,
Ariel

Not a bad idea, though really what would be even better is if other 3rd parties would embrace the PSB format so we could just use PSB for everything and leave PSD behind. There's almost no difference in size. Here's the same file saved in both formats:
C:\TEMP>dir egb.ps*
Volume in drive C is C - NoelC4 SSD
Volume Serial Number is 00ED-C11E
Directory of C:\TEMP
06/30/2012 01:04 PM 1,411,420 EGB.psb
06/30/2012 12:14 AM 1,397,248 EGB.psd
In my case, I don't send PSDs to anyone, they just represent archives of my master work, and I will always have a modern version of Photoshop to read them with. So if I could I would just use PSB for all master files. Problem is, two 3rd party tools I like to use don't currently handle it:
IrfanView
FastPictureViewer Codec Pack
Probably some day in the future they'll work. I encourage you to write to the people whose tools you'd like to see be able to read PSB to implement support.
See also this thread: http://forums.adobe.com/message/4393244
-Noel

Do we have some different mode of iphone unlocking feature like swipe ?

Do we have some different mode of iphone unlocking feature like swipe or image clicks?

Sorry to say no, unlick the android your stuck with the phone OS and very limited in how you can modify it.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

Just subscribed to Acrobat for $19.99/year to be able to use expanded pdf manipulation features. From left hand window I signed in successfully. However when I try to use a feature like export to Word doc I am sent to Web page to subscribe for more money.

Just subscribed to Acrobat for $19.99/year to be able to use expanded pdf manipulation features. From left hand window I signed in successfully. However when I try to use a feature like export to Word doc I am sent to Web page to subscribe for more money. I thought I had already paid for access to these features by subscribing for the $19.99? What features did this $19.99 allow me if NOT to edit or export PDF files?

Please check the name of what you subscribed to. You say "Acrobat" but that isn't $19.99/year. Unfortunately Adobe have products which do the same thing and need to be used in different ways.

Maximum Character size of Front Panel indicator in LabVIEW

Hi,
I have a simple question that I hope somebody can answer. Is there a maximum character size that can be displayed in a Front Panel indicator in LabVIEW? If so, what is it? I have a VI that is continuously reading a serial port and updating a front panel indicator, and I need to know how much text can be displayed before it either truncates or throws an error. This is for LabVIEW 2010 SP1.
Thank you,
J Korn

A quick Flatten to string shows how LabVIEW stores strings {size-data} Size is a U32 so 4294967295 characters max.
The big thing to remember is this memory must be contiguous (and the Indicator requires a COPY) so in practice the performance hit for constantly allocating larger and larger buffers for the data and available memory impose practical limits much lower than the 4294967295 Char maximum. Probably better to log the data to a file and maintain only the last x characters on the indicator and use the file to look a history data
Jeff

I am an MBA student , doing a research project on e-learning authoring tools, would like to find out no. of licences sold/active to date for adobe captivate. how many get sold every year. any pointers/help is appreciated. cheers.

I am an MBA student , doing a research project on e-learning authoring tools, would like to find out no. of licences sold/active to date for adobe captivate. how many get sold every year. any pointers/help is appreciated. cheers.

I doubt you'll get an answer in a user forum, sorry. This forum is meant for users to help other users when they have problems that have to be solved. You should contact Adobe itself.

Regular selection tool cannot change object size

I am using CS6. When you create a simple square or any object, you will be able to use the regular selection tool to change the size by draggin on the "control point" around the object.
However, I was able to do it before but I dun know why I can't do it suddenly. The regular selection tool just enable me to move the image even I click on the "control point" on the object. If I need to change the size, I need to use the resize tools which is a hassle.
Anyone knows what happened? Am I having some wrong setting in my AI ?

View > Show Bounding Box

How to use DPS features like Folio Overlays while exporting to SWF?

I'm creating an interactive magazine in InDesign, it's been decided that the magazine will be exported to SWF and uploaded to our company website for viewing by the public. I want things like slideshows and scrollabe text frames. I saw that InDesign had an update to include some DPS features like the Folio Overlays, so I applied a Slideshow overlay and a Scrollable Frame overlay but neither of them seem to work after I export to SWF. I still want to have slideshows and scrollable frames, how can I still have them while exporting to SWF?

DPS is for mobile devices through Adobe’s Digital Publishing Suite. The reason SWF is dead is because it’s pretty much incompatible with mobile devices. If you want to go to the web and keep things interactive you really need to be looking HTML5 / CSS3 type of websites. In5, which I mentioned in my earlier response will give you quite bit of help in going from InDesign to web, but I would strongly suggest you take a look at Muse if you’re not comfortable with HTML and CSS.

Would like file sizes in windows to recalculate always

Friends:
I'm using OS X 10.4.10 and would like the size of each file to update on any window I open. As it stands only some folders have sizes. Ive got my View options set to calculate sizes for all windows, but when I return a few days later this option seems to turn off. How do I lock it on permanently? Can I go in the terminal and do some permanent hack?
Thanks knowledgeable ones!
Migs

i'm having the exact same problem!
does anyone know how to fix it?
the calculate all sizes seems to be disabled each time finder is relaunched.

Modifying tool features like character size

Similar Messages

Maybe you are looking for