Modprobe cciss not working in 0.7.1 but works in 0.7 CD

Thanks in advance for any help.  I'm installing Arch on an scsi raid partition.  Both drives are connected to a compaq smart array 532 controller.  After booting from the 0.7 base arch cd I can do a modprobe cciss and then do cfdisk /dev/cciss/c0d0 which lets me partition the raid setup or I can do mount /dev/cciss/c0d0p1 to mount the first partition on it.  When I boot from the 0.7.1 full CD though, I can do modprobe cciss but under /dev I only see DIRECTORIES instead of device names with exclamation points at the end such as /dev/cciss/c0d0p1! but I can't mount any of them (or at least I can't find the device name in there that will work.)  Obviously 0.7.1 handles this differently than 0.7 and cfdisk /dev/cciss/c0d0! or c0d0 tells me there's nothing to read.  What am I doing wrong? Thanks again for any help.

i've got a problem too with the same hardware configuration and 0.7.1 CD
i can modprobe cciss and see my partitions in /dev but the installer doesn't even see the disk !
another problem with this 0.7.1 release...
I'm more and more disappointed by ArchLinux development, i think the devs want to go too fast, not enough testing...

Similar Messages

  • I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    Check for updates by running MS Office Update directly from:
    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    (Open Finder, ⇧⌘G, paste in the above and click)

  • My iCloud password won't work in my MacBook Air but works in my IPhone5s.

    My ICloud password won't work in my MacBook Air but works in my Iphone5s

    Sorry, but your issue has nothing to do with Apple networking. You may get better results getting a solution if you repost to the iCloud area of the Apple Support Communities.

  • Facebook will not boot up on my iPad but works on my iPhone ??  Please help

    MY Facebook app has not been able to boot up on my iPad since Thursday. It works fine on my iPhone but I just get a blank white screen with a blue border across the header. After a few seconds it just goes back to iPad menu. I have deleted an re installed FB app and updated the iPad software but still not joy....please help!!

    What iPad and MacBook do you have (mid 2011 ot later iPad 2 or later?) and what OS or iOS do you have?  Are they all on same network and apple id with homeshare on?

  • Jpg attachment in email not opening on iphone or ipad, but works on i Mac or other latptop

    I have an iphone, iMac, iPad and other laptops. I received an email with a .JPG attachment.  I went to view the attachmet on my iPad and iPhone, where the .jpg attachements show with the dotted line around them. When I tap they "download" and reach the full file size in the dowload countdown, then do nothing, do not display the image and still have the dotted line around them. This happens on both my iPhone or iPad.  If I view the same email on iMac or windows laptop, I can see the image fine, but not on iPhone or iPad.  What is preventing the image from displaying on any of my mobile devices, but works fine everywhere else?

    Yes, I removed all the other servers all the accounts 
    and setup just the btinternet account 
    and checked all the settings for primary servers etc 
    and made sure all correct 
    also checked the ports and SSL etc 
    tried 587 and 465 
    ports
    done the same on the iphone and ipad 

  • Mailto: link not working from a particular website but works from others

    the mailto: links on my website are not working in firefox v26.0 but other sites mailto links work perfectly well and open gmail has i would expect them to. i know the links on my site are working has i have tested them in chrome and work has expected so the issue is purely within firefox.
    Can anyone give me any clues

    hi
    This is where things are upto:
    Tried everything that has been suggested so far without success,
    I therefore unistalled firefox and rebooted computer and reinstalled FF and retested the links from the top level frameset then clicking the Contact Us link in the left frame.
    The mailto: links when clicked on now open a newly composed message by firstly initiating a new tab within chrome its self (mailto: set to use google chrome within Options-> Options->Applications). If I set this to be Use Gmail then the problem i was having returns.
    Does anyone have any suggestions of why this is.

  • Im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not mashed it just came out, but work, so now im worried apple my wont take care of it

    im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not smashed it just came out, butstill works, so now im worried apple my wont take care of it, what will they do ??  it was a bran new phone

    You are correct to worry. There is no way for Apple to know if the wifi problem was before or after the drop. If you have Apple Care +, you can get a replacement device for a deductible. If not, user damage is not covered under the warranty or regular Apple Care. You would need to see if they will repair the screen (at your cost), or if you would have to purchase an out of warranty replacement.

  • Bluetooth audio will not connec with OS 4 upgrade, but work well with OS 3

    The bluetooth with the OS 4 upgrade will not connect with my car stereo, but OS 3 worked well. The iPhone will connect with the bluetooth handsfree connect with the stereo, but not the audio. In short, I am no longer able to listen to the iPhone's iPod music, or use the navigation app through my stereo. Frustrating... I have done a soft and hard reset, as well as talk with 'Crutchfield' regarding the problem. The problem presents to be an issues with OS 4. What solutions are available?

    I'm having this problem also. Bluetooth audio works fine with my motorola headset or phone "hands free" connection to my ford exployer but does not work with ipod function nor navigation app. Since this is my first iPhone, I don't know if everything worked with OS3.

  • HT1430 my yahoo e-mail wil not send or receive on ipad but works on desktop

    I cannot get my yahoo email to send or receive on ipad 4 but works on desktop.  How can I fix this?

    Yahoo has been having problems with email on iPads.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try a Reset - iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    Or this - Delete the account in Mail and then set it up again.
     Cheers, Tom

  • When a PDF is opened in a tab, my laptop's touchpad scroll stops working for other tabs. (But works perfectly fine on the pdf tab or with every tab after closing the pdf tab)

    My touchpad scroll was not working many times after i installed firefox 6. But it works perfectly fine in other browsers at the same time.
    After some playing around, i found that this problem occurs only when a pdf is open in some tab (The scrolling works in pdf's tab but not in other tabs). Once that particular tab is closed, the scrolling starts working properly.

    Using similar scroll function on my netbook. To add to the above, I find that using scroll is actually causing the PDF to scroll rather than the tab I'm actually in.
    Reader 9 is installed on my Win7 Starter.

  • Column Highlighting Not Working in Chrome or Firefox but works in IE

    Version  4.1.1.00.23
    Hello,
    I have a classic report that I'm trying to apply dynamic column highlighting on.
    I'm following the discussion from Jari https://forums.oracle.com/thread/2209261
    The columns to be highlighted are being determined from a table that gets set every month and the value are being selected in the report query.
    The javascript that is in the Region Footer is:
    [code]
    <script type="text/javascript">
        $(function()
            $('##REGION_ID# input[name="f01"]').each(function(i)
                if ($x('f01').value == 1)
                    var forcast = "JANFORECAST";
                    var actual  = "JANACTUALS";
                    var mth_var = "JANVAR";
                    var mth_var_pnct = "JANVARPER";
                if ($x('f01').value == 2)
                    var forcast = "FEBFORECAST";
                    var actual  = "FEBACTUALS";
                    var mth_var = "FEBVAR";
                    var mth_var_pnct = "FEBVARPER";
                if ($x('f01').value == 3)
                    var forcast = "MARFORECAST";
                    var actual  = "MARACTUALS";
                    var mth_var = "MARVAR";
                    var mth_var_pnct = "MARVARPER";
                if ($x('f01').value == 4)
                    var forcast = "APRFORECAST";
                    var actual  = "APRACTUALS";
                    var mth_var = "APRVAR";
                    var mth_var_pnct = "APRVARPER";
                if ($x('f01').value == 5)
                    var forcast = "MAYFORECAST";
                    var actual  = "MAYACTUALS";
                    var mth_var = "MAYVAR";
                    var mth_var_pnct = "MAYVARPER";
                if ($x('f01').value == 6)
                    var forcast = "JUNFORECAST";
                    var actual  = "JUNACTUALS";
                    var mth_var = "JUNVAR";
                    var mth_var_pnct = "JUNVARPER";
                if ($x('f01').value == 7)
                    var forcast = "JULFORECAST";
                    var actual  = "JULACTUALS";
                    var mth_var = "JULVAR";
                    var mth_var_pnct = "JULVARPER";
                if ($x('f01').value == 8)
                    var forcast = "AUGFORECAST";
                    var actual  = "AUGACTUALS";
                    var mth_var = "AUGVAR";
                    var mth_var_pnct = "AUGVARPER";
                if ($x('f01').value == 9)
                    var forcast = "SEPFORECAST";
                    var actual  = "SEPACTUALS";
                    var mth_var = "SEPVAR";
                    var mth_var_pnct = "SEPVARPER";
                if ($x('f01').value == 10)
                    var forcast = "OCTFORECAST";
                    var actual  = "OCTACTUALS";
                    var mth_var = "OCTVAR";
                    var mth_var_pnct = "OCTVARPER";
                if ($x('f01').value == 11)
                    var forcast = "NOVFORECAST";
                    var actual  = "NOVACTUALS";
                    var mth_var = "NOVVAR";
                    var mth_var_pnct = "NOVVARPER";
                if ($x('f01').value == 12)
                    var forcast = "DECFORECAST";
                    var actual  = "DECACTUALS";
                    var mth_var = "DECVAR";
                    var mth_var_pnct = "DECVARPER";
                $(this).parents("tr:first").find('[headers="' + forcast + '"]').css({"background-color":"silver"});
                $(this).parents("tr:first").find('[headers="' + actual + '"]').css({"background-color":"silver"});
                $(this).parents("tr:first").find('[headers="' + mth_var + '"]').css({"background-color":"silver"});
                $(this).parents("tr:first").find('[headers="' + mth_var_pnct + '"]').css({"background-color":"silver"});
    </script>
    [/code]
    The highlighting works in Internet Explorer, but the same columns are not being highlighted in Chrome or Firefox and there are no errors being reported in either browser.
    Can someone help me with this?
    Is there additional information I can provide that I haven't.
    Thanks,
    Joe

    Hi Fac,
    This is a classic report. After debugging all 3 browsers I finally found the issue.  First, my javascript isn't very good.
    When I looked at the source of the page, I saw that 'F01' contained the value to determine which month's columns to highlight.
    I then thought that if I evaluated the contents of 'F01', using $x('f01').value, that I could set my variables in my if statements.
    During my debugging of the javascript in each of the browsers I came upon the 'this' object being displayed in the watch window. When I expanded the node to view the contents I saw that it also contained the value of the month to highlight as well.
    I have since changed my 'if' statement to if ($x(this).value == <month number> and the hightlighting is working in all 3 browsers correctly.
    Is this still not the right approach as Jari discusses in his post I referenced above?
    Thanks,
    Joe

  • Ipod shuffle does not work on USB 2.0 but works on USB 1.1

    The ipod shuffle works fine but slow on the USB 1.1 port but is recognized as a corrupt Ipod (by the itunes 7.1.1.5) when I use the USB 2.0
    The ipod was first used by the the USB1.1 port because the machine did not have a 2.0 port. I installed a USB 2.0 card and my other USB mass storage works fine on the 2.0 but not the ipod. I have tried to reset the software but the ipod don't respond on the 2.0 ports. I have reset on the 1.1 port with no problems. I have windows XP pro SR2. Do I need to uninstall the itunes and reinstall.
    I don't understabd why even when recognised by the usb1.1 ports why can't I access the ipod through windows explorer like any other usb storage device, it would save the hazzle with the itunes software (click and drag in widows explorer works fine on other usb devices).

    Hi raymarcus,
    Have you tried reinstalling your USB drivers? See this for instructions:
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Also, are you on a laptop? If so, then make sure that your computer is not set to conserve power by automatically turning off the power to its USB ports. See this for details:
    iPod not recognized when connected to Windows laptop over USB
    -Kylene

  • Wireless not working on my MacBook pro, but works on iPhone and other MBP?!

    So I just got my new 15" MBP a few weeks ago. I have wireless Internet in my apartment. Just today I came home to use my computer, and I kept getting errors..... First "cannot connect to the internet". Then I had to enter my network password... Connnection timeout. Then incorrect password (which is crap because I enter it correctly) what's the deal?! Is this a faulty airport device?! The wireless works on my iPhone and my room mate's MacBook, but not mine.....?!
    Message was edited by: Dj Cj

    Well, assuming your MacBook Pro is up-to-date with OS X and Firmware and you can connect to other Wi-Fi (you can easily check that if you haven't already) then it may be a connection issue with the wireless router in your apartment. There are a variety of things this could be from Password Key being entered incorrectly, Media Access Control (MAC) being present on the router, your needing to register the laptop with your ISP, to your router firmware needing an update. I would just break down the possibilities into a list and then start testing them systematically one-by-one. If all fails and you think a hardware problem with the laptop then call Apple and arrange to have it checked over.

  • ADFS SSO not working correctly on 'old' portal, but works fine on preview portal

    We recently configured an AADSYNC and ADFS 'connection' between Azure and our on-premise environment.
    When i log into the preview portal everything works fine, I'm being redirected to our ADFS proxy server and I get authenticated and logged into the portal.
    However, when i try to login to the 'old' portal (manage.windowsazure.com), after entering my username i get redirected to a forms based webpage of our ADFS environment. When i enter my credentials there i get logged in to the portal so, however I houldn't
    be getting a web based login page.
    I am ofcourse trying this from the internal netwerk, the address of our ADFS server is being resolved to the ip address of the internal ADFS server (otherwise logging into the preview portal should also display the web based login page).
    When i go to portal.office.com ADFS is also working fine, no web based login page is being displayed, so it's really just the manage.windowsazure.com portal thats acting strange.
    (I'm trying all this from the same computer, in the same netwerk environment roughly at the same time, and this also happens on other systems and with other users).
    Any ideas?

    I'm having the exact same issue.  If you look at the AD FS server, you'll see a 164 event logged when you try to log in to the old portal.  Something to the effect of:
    Relying Party:
    urn:federation:MicrosoftOnline
    Exception details:
    Microsoft.IdentityServer.Service.Policy.PolicyServer.Engine.InvalidAuthenticationTypePolicyException: MSIS7102: Requested Authentication Method is not supported on the STS
    I have a case opened with Microsoft, awaiting a call back.  This just started, and I don't understand AD FS enough yet to know what to change, or if I should.

  • Audio attachment will not open and play on Ipad4 but works fine on PC. Any suggestions?

    I have been sent an audio attachment in an email to a Hotmail account. It opens and plays fine on my PC but will not open on my Ipad. I get a pop up wanting to forward the attachment from my Comcast email account but neither will open and play it. Any suggestions?

    I kept looking and found this answer in an Ipad forum from IpadJunkie. "Try the OPlayerHD lite app...free. When pressing and holding the WMA attachment select open with OPlayer and it works fine."

Maybe you are looking for