Mods, could we get a sticky thread in the Logic Pro board?

By my count there are upwards of thirteen separate threads asking if there is a free upgrade to Logic Pro X for recent buyers. Could we get a sticky thread about it or FAQ (and maybe even lock the redundant threads)? It's a bit maddening and I'm sure there will be many more.

Look under the individual forums (column on the left), and there is a TAB for each of "User Tips".
The list of threads continue to roll down as new threads are updated/created. Any thread that stays in view forever would clog the arteries.

Similar Messages

Classic 120gb stuck on disk mode and cant get it off and tried the reset ! before it went into disk mode it went it had red cross ?

classic 120gb stuck on disk mode and cant get it off and tried the reset ! before it went into disk mode it went it had red cross ?
i read on the internet that this is a harddrive fault?
please dont say it is!
also there seems to be loads of this same fault hapening to the exact same model!?
please help
Chaz

That's super odd. It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock

"could not get an output file for the document (error RWI 00314)"

Hi
We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
Can some one please suggest any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
Thank's for your help

Hi Sreeram,
Earlier i also faced same kind of problem.
To solve this kind of problems you need to shutdown the server.
second thing is when patches missed that time also you will get this kind of problem.
check j2ee connection is it properly working or not?
Regards,
samar reddy.

Could I get a exist session by the sessionID???

Hi all...
I wanna buile a administrator tool in internet.The main utility of this tool is to monitor every session, could I get the session just by the sessionID in deferent process.
Thanx alot..

You can get a session by it's id. just check the Servlet API docu, there you find the methodes in the "session" section.
If you want to get some more detailed help i would be helpful if you give us a little bit more information about what you have and what you are trying to do.

How to get a good vocal sound with Logic Pro 9

I apologize for the ignorance of this question, but I am really looking to figure out a way to get my vocals to sound the way I would like them to sound, but I'm not really sure where to start.
I started out using Garageband years ago, and really like the vocal setting of "Live Performance" when I went to real instrument/vocal. It had a sound that I liked, and I didn't have to go to a lot work to achieve it. When I went to Logic Pro 9 a while back I saw that they had the Garageband setting of Live Performance, but it really didn't sound the same, so I ended up starting songs in Garageband, and then importing them into Logic Pro.
I would really like to move on and be able to set up vocals from scratch, and put in different inserts and play around with different sounds to experiment with for vocals. Does anyone have any advice on learning inserts to use, and perhaps a tutorial video they might suggest that could help educate me on this?
I don't even know if you should start with Compressor, then Chan EQ. Perhaps someone might be able to steer me in the right direction. Thanks so much.

Klunde, you are missing out the most vital parts in your post. A vocal chain for recording is:
You (your voice) - Microphone - Mic Pre - (perhaps hardware compressor, perhaps not) - (perhaps hardware eq, perhaps not) - then finally what you are recording into.
The source is the single biggest influence on what you need to do in the mix regardless of what you are recording into. In our case here, it happens to be Logic. My own vocal chain changes depending on what i am aiming to achieve and this carries through to the mix. On one song I may use a blue face 1176 plugin if required and on another a CL1B etc. Both sound great but both sound different and there are a myriad of ways to use each one. The same goes for EQ's and reverbs. But what you need for all of this is a great source. Get this right and your mixes and decisions will be a lot easier and your desired results faster to achieve.
So what is your source for your vocals?
After this it is all down to taste. For example, a compressor going into an eq sounds different from an eq going into a compressor. Neither one is right or wrong. Experience and experimentation will tell you which you want to use for a particular song. Top mixer Chris Lord-Alge uses lots of compression on everything. Top mixer Bruce Swedien is notorious for using virtually none. Both consistently mix great records and both have spent a life time honing their art and skill set. Experiment but get your recording chain right which means choosing the right kit for your vocal and gain staging everything properly.

Can anyone tell me how to get groove agent 2 installed in Logic Pro 7?

I've only just started using Logic Pro but I can't seem to get Groove Agent working. It works in stand alone mode but I can't get it to work as an instrument. If anyone can help it would be muchh appreciated.
Thanks
Macbook Mac OS X (10.4.7)

Well according to your signature you have the Macbook and as fas as I know none of the Steinberg stuff is yet Universal so it appears you can't have it working just yet. Otherwise I would check that you have installed also the AU version which is what Logic looks for but in your case it doesn't help.

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

I have used FF for years. Yesterday I could not get it to open. The clock comes on for a second then goes off. IE works OK. I uninstalled and reinstalled FF

I uninstalled FF and reinstalled it with the same results. IE and Chrome work fine. This is something that just started yesterday afternoon. Can you help?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

HT1203 iTunes: How to share music between different accounts on a single computer - I tried to use the instructions to configure 2 different windows users sharing the same iTunes library. I could not get this to work per the instructions.

I tried to configure 2 windows users accounts using a single library per the instructions in HT1203. My iTunes library is on an external drive. I cannot get this to work. Any suggestions?

To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
If you want to give full read/write access to more than one user, see the support article linked below.
iTunes: How to share music between different accounts on a single computer
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

My MacBook Pro is stuck in Dashboard overlay. When I opened the case this morning there it was. I did not enter this mode and cannot get out and back to the desktop. I have tried Mission control, but it will not open, escape doesn't work either.

I have a MacBook Pro running Yosemite.I did not shut down the computer last night. When I opened the computer this morning Dashboard in overlay was on the screen. I have not been able to get out of dashboard. I have tried esc, F12, and accessing System Preferences in the Dock. I clicked on Mission control and nothing changed. Help be get back to my desktop.

     Did you try restarting the computer?
    Delete com.apple.dashboard.plist file.
    Quit all applications.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" from the drop down.
    Library > Preferences > com.apple.dashboard.plist
    Right click on it and select "Move it to Trash".
    Restart.
    If this doesn’t help, Put back the com.apple.dashboard.plist
    Right click the Trash icon in the Dock and select “Open”.
    Right click the com.apple.dashboard.plist and select “Put Back”.

I want to get an iMac to learn Logic Pro primarily and gaming secondly

I am new to all this (computers, Logic Pro and video games) but I want to learn. Is an iMac a good computer to run Logic Pro (I am also considering Mac mini)? I am also wondering about the nvidia geforce gtx 780m with 4 gb dedicated ram. How many years down the road will this graphics card be good for. From what I hear pc gamers have to periodically be upgrading things like graphics cards on their computers to be able to play newer games in the future, but I don't have that option with say this graphics card on the 27 inch imac, so I guess my question is, for how long will this nvidia geforce gtx 780m with 4 gb dedicated ram be good for before it becomes obsolete, 3 years, 5 years ,maybe more or less I do not know. I was thinking about getting a Mac mini for the Logic Pro and getting a play station 4 for gaming or just getting thr iMac and use it for both Logic Pro and gaming and forget about the play station 4. I need some real help over here, so if anyone could please help me out I would greatly appreciate it. Thank you. P.S. I have also heard that the Mac mini is a good option for Logic Pro being that it has the integrated graphics card and Logic Pro is not a really graphic intensive app, so maybe I would be straight going the Mac mini and play station 4 route.

You are better off getting a dedicated gaming box for gaming than using a Mac for heavy gaming.
Unless you go with a top of the line iMac with just about all of the optional components, Macs do not make great heavy gaming machines. Plus, a gaming box is sooo much cheaper than a Mac for gaming.
For using Logic, I would just go for the 21 inch screen iMac and get it with the optional full 16 GBs of RAM and optional i7 CPU and, if you can afford all of the options, get this iMac with the optional Fusion drive, too!
The combination SSD and hard drive in the fusion drive will help make up for the slower 5400 RPM drives that they are putting into only the 21 inch screen models.
With this configuration, this iMac would last you, at least, 5 years.

I bought music "The Wall (Deluxe experience)" from my iPhone and there is a video included I could not get.

I bought music "The Wall (Deluxe experience)" from my iPhone and there is a video included I could not get.

Hey fernandoediaz,
Welcome to the Apple Support Communities. You can easily download any previous purchase from your iPhone. The following article will sort you out.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID used for the original purchase.
Tap More from the bottom navigation bar.
Tap Purchased to go to your Purchased page.
This will get you in the right place, then check your videos app on your device and you
Regards,
-Norm G.

Bought logic pro 9.1.7 online for new MBP with mountain Lion, but asked for serial number. Where could I get SN?

How can I get the SN for an online version of Logic Pro bought from AppStore?
Thanks!

good news. The trick is to delete the "logic pro 9" by dragging the App from Finder->Applications to trash bin, and re-doanload and re-install it again. Now it's happily downloading 19GB contents without asking for SN.
Thanks Pancenter for your message. This is is brand-new MBP with Retina display, and I didn't find or delete and reg file for logic. Simply delete the app under installation (not in the launch pad, see above) and re-install. It works for the 2nd try. It could be a SW integration bug.

Could not get DeploymentManager during SOA install

I am getting the following error:
*Could not get DeploymentManager
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied. More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.*
during the SOA install. I am installing 10.1.3.1 and then I was going to patch it to 10.1.3.3. I am installing it on a Windows XP and ironic thing is it has been installed once on this machine without any errors. I started tinkering with some configuration files so I can process large ESB input files and the metadata repository got hosed. I then went to install it again but started getting this error. I am not doing anything differently from the previous successful installation. Issues like these and others in Oracle SOA is forcing our company to seriously start looking at alternatives.
Thanks for any help.

Are you sure you have setup the connectivity correctly in JDev. If you have not removed the previous install correctly it could have held on to the ports, therefore the second install does not use the default.
Things to check is the oc4j container, and the port. Also perform a test to ensure all things are connecting correctly.
cheers
James

Sticky Threads

Okay, I admit, this is just a pet peeve of mine, but it seems that about half the sticky threads at the top of this forum are either outdated or badly outdated.
Two examples;
Can I REALLY still win a CS3 Master Collection?
And how many people are still having problems with the serial number for their CS2 demo?
As I said, just a pet peeve rant. Sorry for the interruption. Return to what you were doing.

Nobody seem to read those anyway. "FAQ, what FAQ?"
As for ad-enabled PDFs ... perhaps the idea didn't quite have the magnitude they hoped. I never heard of those since.

Mods, could we get a sticky thread in the Logic Pro board?

Similar Messages

Maybe you are looking for