MODS TAKE NOTE!!! I am brassed off with ignorance ...

I have received yet another email from the mods today. SO I will make this very clear on this board so people can see exactly what I am stating.
I have the replacement hub hich I clearly stated I did NOT want as there was no fault with the existing hub.
I have a returns bag as sent with the replacement hub.
I DO NOT HAVE A POST OFFICE NEAR ME AND CANNOT GET TO A POST OFFICE IN THEIR OPENING HOURS!!!!!!!!!!!. I DO NOT WANT ANOTHER RETURNS BAG SENT TO ME, I WANT YOU TO SEE SOME SENSE AND GET ONE OF YOUR PASSING BY 'ENGINEERS' TO PICK IT UP.
OR ACCEPT THAT IT CANNOT BE RETURNED.
I am a contractor and do not get time off with pay, thereofre for me to get to a Post Office in their openiong hours means I have to lose money for an item that should not even be with me in the first place.
Is this now simple enough for everyone to understand?????????????????????
You want it back then send a courier. There will be no attempt to charge me for this product even though at this date you have not mentioned this. However, take this as advanced notice, any excess payment taken from my bank account will be met with sever action against you....with plenty of bad publicity!

Dont bother BT would just scrap it any way I think they only send the envelope to meet their recycle obligations
just stick it in a dark cupboard for a few months as a spare for when you need one and as its a hub you will need one
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Similar Messages

Possible to take notes direct in the pdf (with pen)

i use this program in my work, as i am building a electrial cabinets
but i miss the function of taking notes directly in the pdf, and being able to "check" (make a mark) with my touch pen where i am and what i have done.
but this program is not able to take notes like that it seems?
i use adobe reader in an android tablet also, and the funktions in that program are excellent. i want those funktions in my windows tablet
is it possible?
Thanks / Anders

Assuming that you are running Windows 8/8.1/RT/RT 8.1, Microsoft Reader is already preinstalled on your system.
Here's how to find Microsoft Reader and launch it.
1. Open the Search Charm.
Touch: Swipe in from the right edge of the screen and tap the Search button.
Mouse: Point to the upper-right or the lower-right corner of the screen and click the Search button.
Keyboard: Press the Windows key + S.
2. Enter "Reader".
3. Select Reader (with the white logo on the orange background).

My ipod touch will not switch on and off with the button at the top. There is an almost constant loudspeaker icon on the screen. The volume control is unresponsive and stuck on no volume.

My ipond touch will not switch off with the button at the top. There is an almost constant loudspeaker symbol on the screen. The volume control doesn't work and is stuck on no volume. Help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Time machine not auto-powering on/off with Mac, also where is older back up

My new Mac Pro (10.5.7) and TM were working perfectly until I went away for 3 weeks and disconnected the drive. Now it doesn't power on and off automatically with the Mac, no blue activity lights are showing and it doesn't seem to have retained any of the back-ups that were done before I went away. ie it had to start the back-up of the whole Mac from scratch.
Can anybody help with these queries please?
Thanks.

dinglydell wrote:
Thanks, but... tried 'de-selecting, then re-selecting the Put the hard disk(s) to sleep ... option in System Preferences > Energy Saver', but it made no difference, still no blue activity light on the My Book drive and it still doesn't shut down when I shut down the Mac.
Regarding the TM having done a whole new back up and not kept the old one, you say 'Especially if you made a lot of changes during that three weeks, TM may have done a new, full backup'. But I did no work for that 3 weeks
Ahh, the plot thickens! I assumed you'd been gone, working with your Mac, away from the external HD.
and no, there's no old back-up on the backup drive I use (My Book). TM Buddy shows that it did do a back-up on 7 August just before I went away, but there is no back-up from then remaining!
Are you sure? Try holding down the Option key while selecting the TM icon in your Menubar (or control-clicking the TM icon in your Dock), and selecting the (badly named) +*Browse Other Time Machine Disks+* option. They may magically appear that way.
In fact TM Buddy says about the first backup I did when I got back 'no expired backups exist'.
What did it say about how much space was available -- the whole disk?
Also, My Book drive is now very noisy when it backs up. Hope you can help! Thanks.
That is never a good sign. How old is it?

HT1414 my ipad air is frozen with the i tunes logo and a black screen it does not turn on or off with the red bar

my i pad air is frozen because it has a black screen with just the I tunes icon but you can't turn it on or off or do anything please can you help

I'm sorry. I missed your response earlier today.
You will need to use recovery mode. You can start iTunes on your computer first. Then you plug the cable into the computer, hold down the home button on the iPad and plug the cable into the iPad.
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.

Two switches in server mode do not advertise their vlan info. with each other

Hello All,
I have some queries regarding the VTP advertisement as below.
Scenario.....
I have taken two switches named as switch-A and Switch-B connected with each other with port f0/1.I have defined f0/1 as trunk on both the switches.
Then i created the Vlan 2,3,4 on switch-A ,Switch-A configurations revision number got changed from 0 to 3.But when i look up the same on switch-B the revision number is 0 and the vlan that was created on Switch-A is not replicated to Switch-B.
Both Switch-A and Switch-B has default VTP domain configured i.e Null
Both the Switches are in Server mode.
On both the Switches domain password set to null.
Why the vlan is not getting advertise from Switch-A to Switch-B?.According to the vtp configuration they both belong to the same vtp domain i.e null.
So they should advertise the vlan information with each other.
Your suggestion will be appreciated on this.Awaiting for your reply
Thanks,
Mrityunjay singh

Hi Jon,
The trunk is up and running fine.Please find the output for trunk and vtp status as below.
SWITCH-A output---------
SWITCH-A(config)#do sh int f0/1 switch
Name: Fa0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
SWITCH-A(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 3
Maximum VLANs supported locally : 255
Number of existing VLANs : 8
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x58 0xD0 0x3C 0x06 0x01 0xE3 0xD7 0x4D
Configuration last modified by 0.0.0.0 at 3-1-93 00:03:02
Local updater ID is 0.0.0.0 (no valid interface found)
SWITCH-B output.......
SWITCH-B(config)#do sh int f0/1 swit
Name: Fa0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
SWITCH-B(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 255
Number of existing VLANs : 5
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x7D 0x5A 0xA6 0x0E 0x9A 0x72 0xA0 0x3A
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Local updater ID is 0.0.0.0 (no valid interface found)
I have tried by changing the vtp domain name instead of null and it is working fine in that scenario.But my question is why not is works when the vtp domain is set to null on both the switches.
Your update would be appreciated.
Thanks,
Mrityunjay Singh

TS1398 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Thanks

My husband's 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Please advise what our next step should be. Thank you for taking the time to read this post!!

Just to double check you tried eveyrthing take a look at this link http://support.apple.com/kb/TS1398 .
Can also try powering off the home router, then the phone, and then power up the router wait for the signal and then power up the phone and see if he can connect.

My iPhone 3g is stuck in recovery mode. When I connect to iTunes to restore it shuts off with only 4 mins. left. How can I fix this?

My iPhone 3G is stuck in recovery mode. When I connect to iTunes to restore it (It takes about 20 mins) it shuts off with only 4 mins left. Can this be fixed?

unhappy@apple wrote:
but t say's that it will delet all the my stuff i have on their, can i get some other way?
Not if it is in Recovery mode.
-> http://support.apple.com/kb/HT1808
You can restore from backup.
-> http://support.apple.com/kb/HT1766

Iphone 4 black screen, tried dfu mode, itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding. HELP

iphone 4 black screen, tried dfu mode itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding.
Phone was given to me by apple 2 weeks ago. Last I saw of it working was phone was off so i did the quick reset. Apple logo came up, it started up and keypad for passcode came up. It said 2% battery then went up to 64% a second later. When I was playing wth it not 5mins before it was at 65% so would make sence that later indication was correct. Before I could type the 4 digit passcode in the phone turned off to black screen. Now I have tried all possible reset options incuding the 10 second hold down of both buttons for less than 10 seconds and longer than 10 seconds. Nothing is working. iTunes is not recognising the device at all. Ive had it plugged into a wall socket for three hours and the computer for 2 hours and no signal of life. Ive tried the forums on here and the youtube vidoes and seem to know what im doing with resets. Anyone able to shed some light?

Not being able to get DFU Mode indicates hardware failure. Since you recently received this iPhone from Apple it has at a minimum 90 day Warranty. Make Genius reservation or make service arrangements and take or send to Apple for resolution. Regarding what is actually wrong with the iPhone, it could be possibility of several things. But some of the features point directly to battery. First step in fixing this iPhone would be battery replacement. Then trouble-shooting from there if still problem. Take it to Apple.

Stamina Mode doesn't immediately take effect when screen is off.

This is what I observed after playing around with Stamina mode on the Z3C. My build version is: 23.0.1.A.5.79 and running Android Version 4.4.4.
When you manually lock the screen it doesn't immediately go into stamina mode, and I can still receive data from all apps and get all notifications. After about 5 mins of staying locked with no interruption from data received and notifications, Stamina mode will start working and only allow the allowed list of apps to receive data and display notifications. Another observation is that once Stamina mode is working as it should and one of the allowed apps wakes up the screen, Stamina mode will continue block any apps not listed as allowed to receive data and continue to work, which is PERFECT.
However, if any data is received between the time you lock the screen and the 5 min mark, notifications can keep coming from any app until the full 5 mins has gone through with no interruption from any apps data or notifications.
My question is why doesn't Stamina mode take effect immediately after you lock your phone and the screen is off? If it waits for 5 mins and data keeps coming every 1-4 mins, then Stamina mode will never be activated and the battery will drain as normal.

http://talk.sonymobile.com/t5/FAQ/Battery-time-and-enhancement-features/m-p/347874#U347874
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

IOS 8 lockscreen keyboard does not let me input characters with accent marks. My password has an accent mark. I can't restore the device without unlocking it and turning off find my iPod. What can I even do here?

I do have a third party keyboard installed (fleksy), and I removed english and emoji from the keyboards list in settings before rebooting the ipod. When it booted up, it asked for my device password with the default keyboard, but I can't type any letters with accent marks, so I can't enter the password. I figured I could fix this by restoring a backup and changing my password, but I can't restore a backup without turning off Find My iPod - which of course requires me to unlock the device with the device password, which I can't do. Am I stuck here? Is there anything at all that I can do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!

You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again

HT1212 Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Itouch stuck on recovery mode, could not even switch off

Hi, I just bought my itouch today and i just finished charging it, when I connected it to my computer, it said that I should update my software and when I did, an error message popped up and now its stuck on recovery mode, I could not even switch it off.
any ideas what should i do?

Apple should be ashamed of itself. I just spent several hours fixing what that bogus "upgrade" caused to happen to my 1G.
For the most part I like the unit for what it does with music but what functionality I wanted was to be able to download a movie and not have to clog up my HDD.
Honestly this functionality should have been included free of charge. So I figure I'll just keep it as is and then find out that I can't even install the simplest of free applications unless it involves lining their pockes with more money. Of the 2 apps that did the same thing the one that was paid had the option to upgrade while the free one tagged me with having to update the OS. Anyways thinking that maybe it's gonna be worth it I paid the 5 bucks for the upgrade.
IT DOESN'T EVEN WORK!!!!!!!!!!
Panic, reasearch and hours later I am finally syncing my unit with a horribly outdated OS. Thanks for the apple experience. I feel so a$$ raped right now.

Why is iMessage taking my incoming emails and then not making them available for my PC to get? Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).

Apple is great!
Why is iMessage taking my incoming emails and then not making them available for my PC to get? Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).
I compose an iMessage with the destination as my email address and I attach 2 photos I want on my PC. I send them several times from my iPhone 5C but they never arrive. I look at my ipad later and realize that it's iMessage app is getting ( and swallowing) these emails. I then turn the ipad off. Still can't get the photos through because iphone is now getting them on it's iMessage. I turn off the iMessage feature and try to send photos from text msging. Phone tells me it can't send photos unless iMessage it turned on. What happened to regular MMS text messaging? I go and try to send photos as an email attachment and see that there is no option to attach from the stupid email program. I look up online to learn about the brave new world of apple attachments and send them.
Why is iMessage taking my incoming emails and then not making them available for my PC to get?
The email program on my iphone is not configured to remove messages from the server.
If iMessage is turned off I don't have the issue.
Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).

Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

MODS TAKE NOTE!!! I am brassed off with ignorance ...

Similar Messages

Maybe you are looking for