Module booking capacity

Today i got a message from Postech that when module booking is meet maximum capacity we can use message override but in this case link between student and event is not created.
it is standard error or do we have any customizing for this.
regards,
jin dal

Hi Jin Dal,
Capacity is checked on various levels as mentioned in the previous response. The override from Student Lifecycle Management allows with authorization to override module and event package capacity messages. The maximum event capacity (which is either maximum capacity defined through the event itself or by the maximum capacity of the room) could not be exceeded. It could be that in your case the message log shows capacity exceeded limits for both the module and the event. The message log probably shows one being overridable and the other one not. If you then override the system executes the module booking activity, however could not execute the event booking. Then of course no event booking is created.
You may be able to resolve this by changing the event capacities appropriately.
The nice feature of dealing with capacity on all levels is the ability to share events accross various contexts. However this imposes that there is a seperate capacity management on this level.
Regards
Joachim

Similar Messages

Module Booking

Hi Michael,
This is rahul.Am working on Module booking when am trying to book modules from student file am unable to see module list for that particular year & session
it is not displaying any module.
I have done session offering for modules.
but still it is not displaying module for that year & session.
Thanks in advance.
Regards,
rahul.

Hi Jin Dal,
Capacity is checked on various levels as mentioned in the previous response. The override from Student Lifecycle Management allows with authorization to override module and event package capacity messages. The maximum event capacity (which is either maximum capacity defined through the event itself or by the maximum capacity of the room) could not be exceeded. It could be that in your case the message log shows capacity exceeded limits for both the module and the event. The message log probably shows one being overridable and the other one not. If you then override the system executes the module booking activity, however could not execute the event booking. Then of course no event booking is created.
You may be able to resolve this by changing the event capacities appropriately.
The nice feature of dealing with capacity on all levels is the ability to share events accross various contexts. However this imposes that there is a seperate capacity management on this level.
Regards
Joachim

Address book capacity or amount of memory per entry

I am working on a project that would add a shared database of contacts to a variety of handhelds.
After searching this forum and others I can see that the address book capacity seems dependent on the onboard memory.
Can any tell me or direct me to an estimate of the amount of handheld memory required per contact?
Ideally, I would like to get the memory per contact and the memory per contact w/attached photo.
right now the database is Name, home address, DOB, notes, and User1-3. Adding a photo is kind of pie in the sky considering that I don't have the photo files yet, but it seems a natural evolution of my project so...
Post relates to: Palm TX

I'd suggest you ask this question over at the Access Developer Network forum. We're mostly End-user centric here!
ACCESS Developer Network
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Rules check at Module Booking

Hi,
Sorry that i am putting so many questions at a rapid pace.
My client has strange requirements at module booking level. The system shall check the academic overview of previous module if booking is happening at subsequent module. It shall count the Pass/fail status and no of repetitions. In case it is not meeting any requirement it shall not book the students in next module and trigger a mail to HOD.
Do we have any standard functionality for this or we have to code it in module booking function module?
I am not sure about using VSR rules for meeting the same? Please suggest.
Regards
Vinod Kumar

Vinod,
Please check the possibilities within SLcM in the following cookbooks
Extended booking check
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/d023e7a3-f4e2-2b10-58a7-af99a63a2c33
BRF
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/80c4cd46-6ba6-2b10-7198-ebb2d0f5650a
br
Rob

Module booking for a student

I have assigned specializations to the student during registration but during module booking all the modules that are offered for the session are reflecting irrespective of the specialization which ideally should not be the case.
e.g., registered a student to the finance specialization, but during module booking marketing specialization related modules are also reflecting in the selection criterion....
i may be missing few things....pl guide me
Regards,
Sravan

Sravan,
You can test the web self-service just by launching the Web Dynpro PIQ_MBSS_OIF directly at first. The Student Role (delivered with EHP4) in the portal also includes it as part of the Service Map. The standard portal location is:
pcd:portal_content/com.sap.pct/specialist/com.sap.pct.isher.student.bp_folder/com.sap.pct.isher.student.roles/com.sap.pct.isher.student.student
I believe you need the following Business Package in your portal: BPISHERST03_0-10006146
-Michael

SNP Planning Book Capacity Data View Issue

Hi Friends,
In my SNP Planing Books Capcity Data View the total of Production Qty is not matching when I expand the Product wise view for Week 22 2011. Can some one help me to identify why this is happening?
Production Total Qty shown is 29618 but when I view Product Details it totals only 24650 but Total line shows 29618.

Hi,
In the standard SNP planning area 9ASNP02, the relevant KF in Capacity view is 9ACASUP .
There may be a conflict identified between selection and key figures to be read.
You can choose a different selection condition or change to a different data view, and check if ti comes out correctly.
Regards
Datta

Mac Mail & Address Book - Capacity & Storage

Hi all - I have a question regarding the maximum capacities for MacMail & Address Book.
MacMail
Is there a maximum number of messages that can be housed in any given folder? I know it's a good idea to move messages from say, the Inbox, to a sub folder to keep the application running at peak. But what about Sent or Trash? Should messages in these mailboxes be cleared to sub folders on occasion? Also, before anyone says anything about deleting messages, this is not an option ; )
As a rule, we've been moving messages from Trash to sub folders on an iMac running 10.4. Our Macbook pro however does not allow for messages to be moved into sub folders from Trash. Why would this be?
At the moment on the iMac the number of messages in a sub folder called Storage (moved from Trash) is 25K. I wonder if this will max out eventually and wipe messages, as happened about 6 months ago in the Trash folder? Is there industrial strength email software that works great on a Mac?
*Address Book*
Similar to the MacMail question. Is there a maximum number of contacts that one can have using Address Book? Does anyone have a recommendation on an industrial strength solution for contact management that plays nicely with Mac?

Gee it's very quiet around here..

SNP Planning book capacity view -APO Product is blank in drill down

Hi Experts,
I am getting product blank when I am doing Header on/off drill down setting. Even when I am choosing Products from Display dependent objects, It drill down the second grid (Quantity View) and product is blank.
Please let me know if anybody faced the same issue before. We are using version SCM 5.1
Thanks & regards,
Hitesh

Hi,
In the standard SNP planning area 9ASNP02, the relevant KF in Capacity view is 9ACASUP .
There may be a conflict identified between selection and key figures to be read.
You can choose a different selection condition or change to a different data view, and check if ti comes out correctly.
Regards
Datta

MF50 not able to book Capacity on Saturday and Sunday

Dear Experts,
In MF50 planning table the if we book requirement on Saturday and Sunday .we are abel to book the requirement but "Not yet assigned" is gyred out system is creating a back ward scheduling to friday.
In work Centre we maintained factory calender ( all the days are working) and shift sequence.
Please let me know the settings.
Regards
Sandeep

Hi Sandeep,
Check your setting in T-code SCAL.
I think it might be require modification in days selection for Calender creation.
if any doubt then revert back.
Regards,
Mukesh.

Address book capacity

How many enties can I make, it there a limit for contacts?
macbook Mac OS X (10.4)

There is probably a recommended limit but I'm not aware of what if any the limit might be.
How many entries are you talking about?

Capacity booking

Hi
My client wants to book capacity for MTO scenario in advance.
How to do it for MTO scenario. ?

Dear,
It is not possible in standard SAP. System will reserve the capacity when order will be there.
So in MTO if you use the planning strategy 82 Assembly processing w. production orders system will create production order while creating sales order and same time capacity also get book for it.
Regards,
R.Brahmankar

Table which i can see the module for student

Hi all ,
In which table I can see the modules booked for a given student.
Regards
Santosh.

Santosh, you can see that at table hrp1001. You have to look for Object types ST related to Object types SM (SCLAS).
Then, at hrpad506 you can get the status of the booking of the student on the modules, and all booking related data.
Hope this helps.
Diego

Can we enhance 0HE_SLC_MBK_1 - BW datasource to have module as selection

Hello All,
Is there any way you can
have the selection screen enhanced for the Module Booking extractor (0HE_SLC_MBK_1). Currently it has Student number and Busines Partner as options which are not suficient, there are time when we want to do a full load for just particular academic period or particular module so it would be great to have atleast these two options.
Having Module, Event Package and Academic Period as selection option would work great.
I tried modifying the extractor in our sandbox by going to RSA6 in change mode and selecting these boxes in the screen but that does not work and I get short dump. Do you have any ideas about this?
Thanks in advance,
Kiran.

Hi Kiran,
You can enhance it, but you need to modify the coding of the extractor as well. Currently the Extractor is designed in such a way that it reads all the modules for all or a set of students.
It does this via an OPEN CURSOR statement on the table cmacbpst. You would have to build in the new selection criteria via the RSA6 and then enhance the coding.
It is a bit odd that you get a short dump when trying to change the extractor. What exactly are you running into? Maybe you should try to activate the extractor again in the RSA6 (mark it and use the pull down menu DataSource --> Activate).
By the way...you probably cannot have this functionality via the usual customer exit but you would have to make a modification for this to work properly. The customer exit is only accessed AFTER reading all the data specified in the selection criteria.
Jeroen

Using shared objects to create bookmarks in a course module

I'm relatively new to Flash ActionScripting so I'm
looking for a little help from those who live and breathe the code.
I've been banging my head around for weeks trying to get this
function to work in my module (books, tutorials, internet etc...).
My module is rather simple. Each page of content is it's own .swf
file. I call up each .swf by programming the navigation buttons
(Back, Next) with this script:
//Next button
on (release) {
stopAllSounds();
loadMovie ("1_2.swf",0)
//The following Next button script would be:
on (release) {
stopAllSounds();
loadMovie ("1_3.swf",0)
And so on.
I have approximately 49 .swf files (pages of content) in my
module approximately 1 1/2 hrs. So you can see why bookmarking is
important to me as well as my users. If I could get an idea on how
to create the script on the first .swf and what scripting needs to
be on the following .swf's it would be greatly appreciated.

did you manage to solve this? we are looking for the same issue.

Can't see phone memory capacity status

I changed my Nokia 3500c mobile security code from default 12345 to a new one. Then I set phone's security level to memory. After restarting the phone I changed phone security level to phone. Then I tried to see the status of my phone contacts/address-book capacity. But a info message "PHONE MEMORY PROTECTED" appears. I can't see how much of my contacts capacity is being used now. Nokia 3500c has address book capacity of upto 2000 contacts. My firmware version is 6. Why such warning message appears since my phone's security level is set for phone, not memory?

Selecting Phone sets security to the entire phone, including the memory.

Module booking capacity

Similar Messages

Maybe you are looking for