Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Similar Messages

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Images not displaying when using Mod_JK

Has anyone had this problem with any success?
platform:
Windows 2000 Professional
Jakarta Tomcat 4.1.3
Apache 2.0.039
Mod_jk connector
My_Sql 4.0.1
I have a successful connection between Tomcat and Apache via the mod_jk module.
All JSP's are displaying with the appropriate data from MySql.
My problem is that no images will display when I connect through Apache, via port 80.
When I connect to Tomcat direct through port 8080, everything displays properly including images.
Currently, I am running my application under Tomcat's webapp subdirectory.
Is there something that I perhaps not did properly configure with Apache's http.conf file or with
server.xml?
Any suggestions or answers would certainly be appreciated.
Thanks,
Lenny Sorey

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

HTML tags not displayed when using Data Template

Hi All...
I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
the tag starting with
<
is replaced with
& lt;
I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
API and HTML Formated Content
Re: Problem with text data elements containing escaped HTML codes
HTML Output from CDATA
Re: HTML formatted output
Re: Special characters in CLOB are making report fail
Re: Formatting of HTML tag problem
I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
Re: Special characters in CLOB are making report fail
I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
Thanks in Advance...
Edited by: user10280715 on Dec 9, 2008 3:13 PM

Issue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any.

Help topics are not displaying when using Windows 8/IE 10

I have a WebHelp system created in RoboHelp 7. When opening that Help from our application using Windows 8 with Internet Explorer 10 and allowing blocked content, the Help topics do not display in the right pane when clicking a topic from the Contents in the left pane. Below are the steps:
1. Open the Help system from the Help menu within the application.
2. The Allow Blocked Content displays and I allow it.
3. The Help opens and if I click a topic from the TOC in the left pane, the topic doesn't display in the right pane.
A workaround we found was to widen the left pane and the topic then displays. Also, if you don't allow blocked content, this issue doesn't happen. However, I need to allow blocked content in order for PDFs within the Help to open properly and also because the Search doesn't display without allowing blocked content.
We also tested this with a Help system that was created using Robohelp 9 and have the same issue. I'm wondering if RoboHelp 10 would solve this problem.
Does anyone know if IE 10 requires Help systems to be created in RoboHelp 10 to work properly, at least when allowing blocked content?

It seems to be time for the old divide and conquer approach.
Zip up the project so you have a copy that cannot accidentally be opened and worked on. That gives you a copy that you can safely revert to later if needed. Save the zip file somewhere safe.
Then create another copy of the project so that you have two copies that can be worked on.
Open Copy 1 and delete half the topics. Ignore any broken links reported. Generate the help from that copy.
Open Copy 2 and delete the other half of the topics. Generate the help from that copy.
It should be the case that one copy is now OK and one still has the problem.
Trash the good copy and then create a second copy of the copy with the problem.
Repeat the process until you have located whatever is causing the problem.
The process takes less time than you might think.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Function module PTRA_WEB_EXPENSE_REPORT_GET_2 not working when used in loop

Hi All,
I have used a function module PTRA_WEB_EXPENSE_REPORT_GET_2 in a custom fumction module which i am developing fetch the travel expense data . The function module PTRA_WEB_EXPENSE_REPORT_GET_2 returns the travel expense data based on the employee and the trip number. I want to fetch the travel expense data for a given set of employees and trip number and hence i have used this function module inside a loop statement.
The function module returns the travel expense data for the employee and trip in the first loop pass. From the second loop passs it doesn't return the value. I have also checked this in se37 and the same thing happens. Value is returned for the fist employee but for the next employee we have to go to initial screen of se37 and execute the Func. module again.
I debugged this function module and found that the value of the employee and the trip number is stored in the global variable. The value passed for the employee and trip is compared with the correspomding value in the global variable and if they are not same an error message is returned. Since we are using in a loop , each time a different value is passed for the employee and trip and the check fails .
Is there any way to clear the value in the global parameters or is there any other function module which can be used to clear the values of the global variables?
Thanks!
Regards
Manipal Parkala

Hello Archana,
May be we can try several ways...
1) can you try calling function module BUFFER_REFRESH_ALL ??
after each call...
2) May be u can call Function module "PTRA_WEB_EXPENSE_REPORT_GET_2 " in background task or seperate task , it will load the function group everytime when u call it in loop.
***DO let us know if it does not work.
thanks
~Raj

WAD Variable screen not displaying when using a customer exit variable

Hello,
I have a query which has 3 variables, one of which is of type customer exit and gets populated with a default value.
When I run this query on the web from within BEX it works fine, however when I run it within any BI7 web template the variable screen does not pop up. Of course if I remove or change the offending customer exit variable the variable screen pops up.
I have switched the display variable check-box to on, and it still doesn't work.
Is this a 'feature' of BI7?
Many thanks
Sarah

Fixed it myself by tweaking the URL....
Added &VARIABLE_SCREEN=X to the end of the url and the variable screen now pops up. Its not an ideal solution but it works.
Anyone have any better ideas?

Timecode not displaying when using QTSS

Hi, I have timecode selected on some of my QT's but when I play them via the QTSS it does not get displayed. If I play them locally i can see the timecode.
Have I missed something silly?

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Cc text not displaying when using full motion recording

Hello everyone,
I wanted to find out if anyone has experienced a problem with
cc text not being displayed on slides with full motion recording.
I have added and sync'd the cc text on a slide that has full
motion recording. When publishing the file, no cc text appears in
the the published file.
Is there a workaround or a setting that I need to check to
ensure that the cctext shows up?
Any information which anyone can provide would be greatly
appreciated.
Sherry

Hi Sherry,
I'm having the same problem you were last year! Just wondered if you were able to find a workaround.
I have a full motion page with audio embedded in it (meaning that the audio does not show up as its own item in the timeline view). When I open the Advanced Audio Management dialog box, I'm not able to add a caption because CP4 doesn't think there's sound on this slide. (see attached screen grab -- the slide in question is slide 9. You see that the caption button is greyed out).
I've really hit a wall on this one today. I tried deleting the audio and re-adding it from the library, but it doesn't get added as an independent object in the timeline box; it just gloms onto the "captured animation" object.
Maybe it's simply not possible to have a closed caption on a FMR page? That doesn't seem right though.
Thanks, all.
Janet

Legend color not displayed when using custom theme

Hi all,
We are facing a strange issue in the MSS team calender chart's legend colors. The first legend item's color appear blank/white in a custom portal theme while the color appear properly on the standard theme. Inside the chart, the color is appearing properly.
What could be the issue? which property in the theme is connected to the legend?
Thanks and Regards,
Syam.

Hi Sidharth,
We have not done any modifications to the standard service. Also, If this is the reason, why should it appear for some users and why not for others? For those users using the standard theme, the legend colors are appearing properly.
Thanks and Regards,
Shyam.

My edited photos will not display when clicked on, a large triangle with exclmation comes up

my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign.

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Using Slide Tool No two up display when using keyboard shortcuts

I've noticed when using the slide tool using my mouse, I get the two up display in the canvas the way I'm supposed to, where it shows me the new out point on the left frame and the new in point on the right frame. However if I select the clip and then use the left and right brackets to move the clip, I don't get the two up display in the canvas like if I was using the mouse.
Is this normal, and if so, is there a way I can see the two up display when using the keyboard to slide? thanks.

Is this normal?
well the 2-up is activated by the mouse click and when you trim from the keyboard there's no mouse click ... so yes, this is normal
is there a way I can see the two up display when using the keyboard to slide?
good question. am not in front of an FCP station right now but if i were i'd be clicking around trying to find if it was possible some way

Sharepoints not displayed when connecting via FTP

Hi All,
Leopard Server 10.5.8 xserve 2 G5
I have an issue with the built in FTP server.
All my share point are set to be shared via FTP, yet they are not displayed when users log in and access the server via FTP.
In Server Admin, Authenticated users see: FTP Root and Share Points.
All relevant users have access to the FTP service, in the server settings.
ACL permissions have been set correctly for those users.
This is *sudo sharing -l* tells me, for all share points.
name: Archive
path: /Volumes/External RAID/Archive
afp: {
ftp: {
name: Archive
shared: 1
guest access: 0
smb: {
Is there anything that I missed?
Thanks for you help,
Johan
Message was edited by: JohanDouma

Hi,
Sorry for the late respons.
My config:
1 mac mini with OSX Server leopard
1 airport extreem
1 external HDD LaCie
An airport Extreme has the posibility to share a network drive. So I plugged in my HDD into the airport extreme and configured the thing.
Than I turned to the mac mini. And started configuring my sharepoints.
So one of my sharepoints is the external HDD.
There are several directories on there that I want to make available thru the legacy protocol FTP.
So by just making these sharepoints available thru FTP i expected for these sharepoint to show up in mij directories if I connect to my external IP with a FTP client like CyberDuck.
(portforwarding and everything is not the problem, because I can make a connections and all directories show up as browseable.
But the sharepoint I made on the network drive just show up as an bin or another kind off file I can't open.
Everything else is browsable..
They show up by the way in the root dir of the FTP Server as regular symbolic links.
Thru Finder I can browse them and do everything. But as soon as i connect over the internet, lan or whatever, these symbolic links are not the access point towards the directory underneath.
They show up with the correct name just not as an dir I can open.
Hope this helps
Grtz and thnx
(typed on an iPad and not fully used to it)

Why is it when I add photos from iPhoto onto an iMovie project, it is not displayed when I play the movie from beginning to end, although I can see it in the (edit) format?

Hi everyone,
I'm just wondering why is it that when I place an image from iPhoto to an iMovie project, it is not displayed when I play it from beginning to end in fullscreen playback mode? However, when I exit it on the timeline, it is shown. All I did as drag it from the iPhoto column and place on at the beginning. I would really appreciate someones help because I really need to be able to place images onto my projects. Thanks!

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Module borders not displaying when using Aggregator

Similar Messages

Maybe you are looking for