Module Business Processes (request for detailed website links)

Hi,
I'd like to learn more about the different Business processes inside all of the SAP modules. For instance, I'd like to know what Business Processes are included in each SAP Module, what they do, how they are used, what their specific objectives/outlines/uses are and etc.
Please provide online links and documentation that can help me learn more about what each module is and does (in terms of the module specific business processes.)
Any and all help will be greatly appreciated.

Hello John,
Take a look at this.
https://websmp202.sap-ag.de/bestpractices
Detailed information on all SAP Best Practices scenarios (Scenario Overview, Business Process Procedures, Installation Guides etc.) can be found in the SAP Help Portal (http://help.sap.com/)
Cheers !

Similar Messages

Business Process documents for SAP ESHM-Product Compliance

Hello All
Can anybody please the share the links or documents for standard SAP Business Process documents for SAP ESHM-Product Compliance.
What I am looking is for Compliance of Product, IMDS, CDO, Material Data Exchange in the automotive supply-chain, generation of RRR reports.
Well I would be using this for self learning purpose.
Thanks & Regards
Satish

Dear Satis
because of historic reason in history of SAP there might be the risk to misinterpret your question. This would be my first answer:
1.) check this document first: SAP EHS Management for Beginners
2.) check may be:SAP Product and REACH Compliance - SAP Library
Some "topics" are dealed with this SAP solution
3e.) years ago a product if TechniData was available called "Compliance for products". Regarding many of the functions therein: these are now mainly available in the above mentioned solution or in the new solution as shown here:
Component Extension 5.0 for SAP EHS Management – SAP Help Portal Page
Take first a survey in the doucments and links given and then coe back with furthere questions etc.
C.B.
PS: you need to drill down in any of the documents etc. as mentioned above to get the "details"to most of your questions

Request for detailed acts to upload Work center, BOM, Routing data in LSMW

Hello PP ANgels,
Request for detailed actions to upload Work center/Resource, BOM, Routing/Recipe data in LSMW.
Thanks in advance

Sanjay,
In the forum I found that you had used some "drops", that require a password to view.
In these forums, the only links I post are public (help.sap.com) and from SAP support (service.sap.com/support). SAP Support is mostly available only to customers and partners of SAP. If you meet these criteria, and need a login for the SAP support site, contact the license administrator for your company's SAP licence (this is usually a Basis person). If you cannot locate this person in your company, contact Service Marketplace directly (service.sap.com/mp). Alternatively you can contact your local SAP Sales office and speak to your account administrator.
Maybe it would be a better idea to group all standard solutions in one place.
I expect it will be so...in Nirvana. Here, life still entails suffering.
With respect to your detailed questions, I would have a hard time answering, I have never used recordings in LSMW to create work centers, I always use standard batch/direct input. I suspect that the VGEXX items are the units of measure from CRHD, I suspect LARXX items are activities from CSSL, and I couldn't comment on FORXX items without doing some research.
This is the SCM PP forum. You might get more answers posting this in the ERP PP forum SAP ERP Manufacturing - Production Planning (SAP PP) , since work centers/routings/recipes/BOMs are more or less irrelevant in SCM.
Sorry I couldn't be of more assistance.
Best Regards,
DB49

Business Process Flow for old records

A customer has asked us to decommission the Business Process Flow for a particular security role.
I have done this and all is well for new records.
Unfortunately the Process Bar still appears for old Leads. I think I can understand the behaviour: if you change the process, the old records will still show process bar that existed at the time they were created. This includes removing it presumably.
My question is, can I remove the legacy instances of the process bar either through the interface or by code?

Update: I created a command line to update the stageid and processid to NULL.
These fields are now clear, however when I open an affected record the form pops up an error message:
Unhandled Exception: System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=7.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Cannot insert duplicate key.Detail:
<OrganizationServiceFault xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/xrm/2011/Contracts">
<ErrorCode>-2147220937</ErrorCode>
<ErrorDetails xmlns:d2p1="http://schemas.datacontract.org/2004/07/System.Collections.Generic" />
<Message>Cannot insert duplicate key.</Message>
<Timestamp>2015-02-19T14:37:12.1391627Z</Timestamp>
<InnerFault i:nil="true" />
<TraceText>
[Microsoft.Crm.ObjectModel: Microsoft.Crm.ObjectModel.GlobalActiveStagePlugin]
[bb48066e-f22f-412f-a530-91f72e4b859b: GlobalActiveStagePlugin]
</TraceText>
</OrganizationServiceFault>
I can see that the Process Bar is still showing.
Is there something else I would need to do?
Gordon

Business Process Flows for Release 7

Do we have Business process flows available for Fusion HCM Release 7 ? If so, if someone could help us with the link .
Thanks
Ambika

Hi Ambika,
What is the business process flows that you are expecting ?
Business process flows for Workforce deployment, development, Comp? Are you looking for TOI's?
Thanks,
Sankara K.

Business Process Procedure for Internet sales

Hi all, can any send me the Business Process Procedure for B2B and B2C Scenarios.
thanks in advance
[email protected]

Hi Vasanth,
Well in both the cases the generic business process will not be very different.
I mean in both the cases authentication will be there from users.
once you enter into the webshop you will have the options of make inquiry, order, delivery status, billing status
Infact a visit to any webshop like ebay may be of help to you.
You need to take care of folowing details also:
How are incomplete transmissions handled and reconciled?
How are duplicate transactions reconciled?
What authentication method is used for the customer?
What credentials are passed to SAP?
Are the credentials encoded and triggered within the web?
How are such SAP external credentials stored/ protected?
If storing static credentials by process, are the execute versus read authorities assigned on the web as defined by the operating system (OS)?
Are there considerations made for load balancing?
Between SAP systems and clients?
Between web servers?
What roles and responsibilities exist for business processes?
Is IT, through configuration, managing business agreements?
How are changes to the web site tracked and reconciled with SAP transport
strategies?
Is SAP data stored externally on web servers after extraction?
How is this external SAP data protected?
Does the web server force SAP data to expire?
What are the business and process costs associated with all of the above and is
management aware of the business risk of not taking these steps?
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details

Business Process Questionnaires for GL, AP and PO during scoping

Does anybody have any business processes questionnaires for GL, AP and PO that are given to clients during scoping or know where I can get them?

Hi
Refer the following URL which provides operational analysis Questionnaire for few Modules
http://itsafeature.com/sample-operational-analysis-questionnaires/
Hope this helps
Regards
Sivakumar

SAP business process maps for mySAP ECC6.0?

Any idea how we can get the SAP business process maps for mySAP ECC6.0? Is this imbedded in Solution Manager?
Thanks,
Phani

Hello Phani,
I suppose you are looking for the solution maps for mySAP ERP (which contains SAP ECC as a component). These maps are not contained in the SAP Solution Manager, but they are delivered with the SAP Solution Composer, an offline PC tool which allows you to browse and pre-scope your own solution (evaluating your solution). The tool itself including the latest solution map content is always available for download at the SAP Service Marketplace:
<a href="http://service.sap.com/s-composer">http://service.sap.com/s-composer</a>
You can also view the mySAP ERP - as part of the cross-industry maps - right here:
<a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000338980&">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000338980&</a>
The SAP Solution Manager would then come into play for configuring the respective processes (implementing you solution).
Best regards,
Doreen Baseler

Guest password request for purplecat website in oakland california 192.168.33.112

guest password request for purplecat website in oakland california 192.168.33.112

I have the same errors occurring at an alarming rate. I did isolate it to the App Store. Specifically when checking for an update. I was hoping that you could test this out for me. Go to your console log and select all messages and then check kernel in the sender box (bottom left). I found that now is a good time to insert a marker. Now launch the app store then got to the update section. Select check for update.
Does this generate a series of the errors? I can reproduce the errors every time I "check for updates". The error would not show up when checking for updates in iTunes.
I did notice errors in both extending from CFNetwork
App store:
2015-01-15 8:40:38.047 AM storeassetd[356]: CFNetwork SSLHandshake failed (-9802)
iTunes
2015-01-15 8:53:53.986 AM iTunes[2200]: CFNetwork SSLHandshake failed (-9806)
Please compare and see if you get the same results.

Business Process Modeling for Online Mobile Solutions

Hi,
I like to know what are the options available for business process modeling for online mobile applications? I feel Guided Procedure can be used for that but one issue is the standard GP Runtime view may not be suitable for Mobile displays and needs to be modified. Is there any other option available specifically for mobile solutions? Also I read in one article in SCN about a product call Mobile Fast Track (MFT) which is supposed to be delivered on Visual Composer. Is it already available? If yes which release and how to get that?
Any pointers on these will be highly appreciated.
Thanks,
Dipankar

Hi Alvaro Hernán Rojas R ,
The product line is the hierarchy of the finished goods.
It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
Thus logically you should map in solution manager based on the process only.
The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
From the point of view of all of the below three,namely,
Easy configuration activities
Easy design of Unit and integration test
Easy activities of Process enhancement and optimization,
the option Map the process as ISO Standards
- Several projects : For each product line,will be most ideal.
It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
Hope this helps.
Regards,
Ramesh

Determine the business process used for a change request

Good Day All;
I was wondering if any knows how to I would be able to back track from a change request to the Business Process it was created under.
Let me explain our process.
An Issue is created (Solar01).
From the issue, a change request is then created.
Is there anyway I would be able to determine the Business Process if I only had the change request number
Thanks All
Regards
Don Newton

Already answered

Standard business process library for SAP IS-U

Hi,
I need to understand the standard business processes (i.e. in a vanilla implementation) of SAP IS-U for Offer & Contracting.
Is there a tutorial/manual available that explains the standard / vanilla business processes involved with Offer & contracting and that links it with the SAP transactions?
TIA,
Christiaan

Hi,
You should be getting it in help.sap.com itself
http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dce68eafc11d18a030000e829fbbd/frameset.htm

SAP IS OIL MM Module Business Process Documents

Hi all,
I am new to IS oil,
can anyone have Business process for MM module in IS Oil.
Thanks,
Kamlesh.

Goto
SPRO> LOGISTICS GENERAL> MATERIAL MASTER> CONFIGURING THE MATERIAL MASTER>Assign Screen Sequences to User/Material Type/Transaction/Industry Sector
Assign the transaction screen reference to mm01/02/03 transactions
Assign the material type screen reference to the mat type you want to display Oil Data
Assign industry sector screen reference to the industry sector you want
According to the above customize the screen sequence control using Standard Oil screen sequence for the desired key combination
Regards,
George

Business Process Flows for Oracle Cloud

Hi,
Where can I find the Business Process/ Model (BPM) flows for Oracle Cloud (Financials, HCM, Sales, Service, Taleo)?
Anything similar to Retail Reference Model from Oracle BPA Suite (Business Process Architect) would be fine, as long as it is relevant to Oracle Cloud.
I am looking for Level 0 (Oracle Cloud) and Level 1 (Financials, HCM, Sales, Service, Taleo) process flows (Level 2 & 3 optional).
Thanks,
Franklin

I found the required information in Fusion Public Help:
https://fusionhelp.oracle.com/helpPortal/BPM/index.htm

Any change in Business Process Flow for BPC 7.0 NW from BPC 5.1

Dear all,
With the release of BPC 7.0 NW, i was wondering if there's any functional or technical differences in the Business Process Flow compared to BPC 5.1?
Cheers

I second Sorin's observations and comments. There are several limitations in using STS workaround. It is true that STS will be available to use with NW BI. However in order to use that you will have to create a planning area in BPS. Even after doing that you will not have the security framework of BPC available to you in STS. All you can do is list out the steps in the process flow, may be link your planning workbboks and have email notifications sent out upon completion. the other option mentioned was that of SAP workflow. Since BPC7NW has NW platform, SAP workflow is available to you and you can link the BPC process chains to it if you so desire. But again, it won't have BPC security and it won't be even close to BPF in look and feel. The best option is to wait till BPF becomes available in future BPC NW version to use.
Regards
Pravin

Module Business Processes (request for detailed website links)

Similar Messages

Maybe you are looking for