Module Failed SCP dnld

Hi, I have a WS-SVC-IDSM-2 which is showing as PwrDown looking at the show power there is more than enough but there is an error message "Module Failed SCP dnld" does any body know why this is showing? it is something to do with the rom version.
Regards MJ

Sounds like IDSM2 rom issue, or switch IOS that does not recognise it. Sometime this is also happened to Firewall module (FWSM).
Do a 'show hw-module all fpd' and/or 'sh module'. Check the IDSM2 power status at the end of the line. Is the Status 'PwrDown'?
Check the IDSM-2 and switch version compatibility matrix. Issue 'sh version' on the switch, and check the IDSM-2 version (session into IDSM-2).
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/idsm/idsm_2/13074_04.htm#wp333372
HTH. Pls rate all useful post(s)
AK

Similar Messages

  • An output module failed. The file may be damaged or corrupted.

    Whenever I try to render something in After Effects CC 13.1.1, an error message pops up, saying "After Effects error: Rendering error while writing to file '[not going to disclose]' An output module failed. The file may be damaged or corrupted (-1610153464)."
    Screenshot of the error message:
    I tried reinstalling QuickTime (7), repaired it, updated After Effects to the latest version(as I am writing this), checked firewall software, and used other formats such as AVI.
    Adobe Media Encoder (CC 2014-latest version) won't work with me, either.
    I sent the composition to Adobe Media Encoder, and this is what I got, no progress here.
    Screenshot:
    It took a while to connect to the dynamic link server, and failed.
    This is a log of what has happened in Adobe Media Encoder.
    - Source File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\tmpAEtoAMEProject-Pink Intro1.aep
    - Output File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\Pink Intro.mp4
    - Preset Used: YouTube HD 720p 29.97
    - Video: 1280x720 (1.0), 29.97 fps, Progressive
    - Audio: AAC, 320 kbps, 48 kHz, Stereo
    - Bitrate: VBR, 2 pass, Target 5.00 Mbps, Max 5.00 Mbps
    - Encoding Time: 00:00:12
    06/29/2014 02:29:14 PM : Encoding Failed
    The Operation was interrupted by user
    (no need to worry about the above part)
    - Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
    - Output File: C:\Users\Default.BronyGue\Videos\chilledup.wmv
    - Preset Used: Custom
    - Video: 1280x720 (1.0), 29.97 fps, Progressive
    - Audio: Windows Media Audio 10 Professional, 96000 Hz, Stereo, 24 bit
    - Bitrate: CBR, 2 pass, Max 10000.00 kbps
    - Encoding Time: 00:01:42
    11/22/2014 12:24:39 AM : Encoding Failed
    The Operation was interrupted by user
    - Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
    - Output File: C:\Users\Default.BronyGue\Videos\chilledup.mpg
    - Preset Used: Custom
    - Video: 1280x720, 29.97 fps, Progressive, Quality 75
    - Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
    - Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 Mbps
    - Encoding Time: 00:00:11
    11/22/2014 12:52:11 AM : Encoding Failed
    The Operation was interrupted by user
    - Encoding Time: 00:00:51
    11/22/2014 12:53:51 AM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    - Encoding Time: 00:00:46
    11/22/2014 08:39:46 AM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    - Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage4.aep
    - Output File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\montage.mpg
    - Preset Used: Match Source - High bitrate
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 00:00:00
    11/22/2014 10:06:45 AM : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    I need some help! Any solutions?.
    Computer Specs:
    AMD FX-6300
    8GB 1600MHz DDR3 RAM
    NVIDIA GeForce GTX 650 Ti BOOST
    1TB 7200RPM Hard Drive
    Windows 8.1 Update 1(with latest updates)
    EDIT(11/23/2014 8:31PM PST): For some reason, other projects work for me just fine. I am not sure why it is not working on one project.
    Screenshot of a new project other than this I am rendering at the time of writing this edit:

    Can other projects can output to the same output location? Yes
    Can other projects render with the same render settings (codec, format, etc.)? Yes.
    If you create a new composition and just add a solid layer to it with no effects in the same project does it render? No. I still get the error.
    Can you render that brand new comp with the same render settings, output settings, output location etc.? Yes.
    If so, what effects are present in the offending comp? Twixtor Pro in all the cinematics/clips, Motion Tile and Transform for pan/crop & wiggle, Magic Bullet Looks and Bad TV Warping preset with just Wave Warp & Venetian Blinds for color correction, Gradient Ramp for text, Bad TV Warping preset with everything for effect, Transform for fade in/out, and ReelSmart Motion Blur v4.1.2 for motion blur.
    Also, what scripts are you using? Just the Move Anchor Point script I found from one of Mt. Mograph's videos, Summit 16 - 2.5D Minecraft Steve - After Effects - YouTube.
    Have you ever installed any third-party codec packs? (I've heard of some codec packs causing weird issues like this.) Yes, (not everything I have, just everything I can think of and find) I have K-Lite codec pack, Fraps, x264vfw, and Xvid MPEG-4 codec.

  • When I click on Print to print a pdf from my computer, the message "initialization of rasteurization module failed". What does this mean - how do I fix it?

    Why can't I print a pdf in Acrobat Pro? I keep getting the message "initialization of rasteurization module failed". What does that mean and how do I fix that?

    This is an Acrobat error ("Initialization of the rasterizer module failed.") but it is has never been reported before that I can see.
    Let's start with the basics.
    - What version of Acrobat Pro
    - What system
    - What printer
    - Does it happen with other printers?
    - Does it happen with all files?

  • Adobe Print form error: Initialization of the font server module failed.

    Hi all,
    When trying to open a PDF preview the error below is displayed:
    "Initialization of the font server module failed."
    The problem occurs with SAP GUI 7.10 patch 15 and Adobe Reader 9
    With SAP GUI 7.10 patch 12 and 13 with Adobe Reader 9 the problem do not happen.
    Has anybody faced this kind of problem? Is it a SAP GUI patch release issue?
    Any help is welcome.
    Kind regards,
    Thiago Viaro

    Hi Thiago,
    We had exactly the same problem, but also with sp 12 and 13 for sapgui 710.
    After applying ECL 6.0 Patch 4, the problem was solved.
    Please have a look at sap note 1308147 and 1356854
    Cheers,
    Peter Albrecht

  • "...an Output Module failed" error screen...

    Greetings AE Peeps!!
    Long time - no see - been stupid busy. My Studio has just ponied up and upgraded our 5 Edit Stations to AE CS5. I personally am a huge advocate of not upgrading software while in the middle of a project, but this was out of my control. I am having a lot of crashing (app just quits for no reason while scrubbing) and other weirdness...like today. I am rendering a 3 minute piece in ProRes 4:2:2 (1280x720p) to my RAID (no special plug-ins or anything) and I get the following error at the very end of every render:
    After Effects Error: Rendering error while writing to file (insert my RAID path here). An output module failed. The file may be damaged or corrupted (-1610153464)
    I have never in 11 years got a "failed Output Module error". Can anyone speak to this and tell me how to get rid of it short of reinstalling AE?
    Grazie! Ciao!
    Joey

    First, make sure that you've installed the After Effects CS5 (10.0.1) update.
    Regarding the output module failure: It may be that this is because you have an output module created in a previous version of After Effects that refers to a codec or set of settings that isn't working in After Effects CS5. The best thing to do is to remove the output modules from the render items and then rebuild them in After Effects CS5. That may sound tedious, but you only need to do it once, and then you can save output module templates that you know work with After Effects CS5.
    As Mylenium suggested, there are some challenges associated with the fact that there is no 64-bit QuickTime, so we had to create our own 32-bit-to-64-bit QuickTime conversion layer (QT32 Server). QuickTime does work with After Effects CS5, but there are some hiccups in some cases on first use.
    If this doesn't help, answer back and we'll help you through.
    Oh, this might be useful, too:
    http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

  • Output module failed

    I know there are more posted about this problem bust still havent found a solution.
    I can only render out one movie from AE (CC 12.2.1.5). If I want to render a second movie I get ""[file path and name].mov”. An output module failed. The file may be damaged or corrupted. (-1610153464)"
    I've deleted DVCPROHDVideoOutput.component as read on a help file (http://blogs.adobe.com/aftereffects/2013/08/solutions-for-problems-with-quicktime-files-in -after-effects-cc-12-0-because-of-conflict-with-dvcprohdvideoout-quicktime-component.html) but dit didn't fix it.
    A restart of OSX (10.9.2) fix it for one render and then I got the same problem again. I render to DXV codec (rgb+alpha) (http://resolume.com/software/codec)
    What do I do to fix this? Because rebooting is taking to much time
    thx Joost

    Have you installed any third-party codec packs (such as K-lite)? I've seen them cause this sort of issue in the past.
    Have you tried it in AE 13.1 or 13.0?

  • AE CC Render error output module failed

    Hi, I tried my best to find this answer on the forums but couldn't find anything current.
    I have isolated two issues in AE CC where I can duplicate a failed render with this message:
    After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
    This happens when opening an AE CS6 project and trying to render a simple comp with only one text layer and a moving mask. It also just happened after my first round trip test with Cinema 4D. I could RAM preview the c4d layer but the output to Quicktime h.264 failed.
    I have even tried a full reinstall of AE CC. I have the basic FxFactory Pro plugins and MagicBullet Looks installed, but neither are being used since this is a single 1280x720 comp with a single C4D layer. Plus like I said it failed with the same error in past CS6 files.
    I don't know how to force disable a plugin to test that, but I can't see how an unused plugin could cause a render to fail like this.
    I'm on a new (late 2012) 27" iMac
    3.4 GHz Intel Core i7
    8GB RAM
    NVIDIA GeForce GTX 680MX with 2GB VRAM
    OS X 10.8.4
    AE CC 12.0.0.404
    CUDA driver 5.0.59
    Thanks for any suggestions!
    Matt

    Olaf, did you read my reply where I explained my solution? First you should try the steps outlined in the article Todd references:
    http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime- errors-with-after-effects.html
    There seems to be a good way to isolate if it's the same issue I had, though. Let me go into a bit of depth for you.
    The trick was to launch the OS X app called Console, located in Applications > Utilities. It is a program that compiles and displays the system logs in real time. It's great to see the little things happening in the system that don't make it into the user interface. When I had my Console up and generated that same error you're having, I noticed this error in the log:
    The key here is the Adobe QT32 Server, which is mentioned in the TCP part of the article I linked to above from Todd. In my case at least, what was happening was that a third party app called AirServer was talking to the system's QuickTime over the same TCP ports the QT32 Server engine was trying, and it resulted in Adobe QT32 Server crashing, and that alert being thrown up in AfterEffects.
    If you're in the same boat, it means you have some sort of app or system extension that is also talking to QuickTime over TCP. That may not make any sense, but the easy thing to do is quit ALL third party apps, then quit AE, then restart AE.
    In my situation if AE gave me the error and then I quit AirServer, the error still happened because Adobe QT32 had already crashed. You have to relaunch AE after closing the offending third party app.
    To be sure you've quit all third party apps, open Activity Monitor (Applications > Utilities), chose "My Processes" from the dropdown menu, and scan through the list to make sure. You don't have to recognize all the processes there, but you should be able to recognize any third party ones you put there.
    Hope that helps!
    Matt

  • Rendering error whilst writing to file /filename etc./ An output module failed

    I'm trying to render my composition in the latest AE CC 2014.  I get the following error with all composition sizes and with different codecs:  Rendering error whilst writing to file /filename etc./ An output module failed. The file may be damaged or corrupted (-1610153464). Can anyone help me sort this problem?

    AE build number? Codec used? System OS? 

  • Output module failed 1610153464

    I am running CS5 on a Mac 10.6.6. I have both QTX and QT 7.6.6 installed
    Every time I render, it gives the following error message:
    An output module failed. The file may be damaged or corrupted. (-1610153464)
    I've tested the files on a different machine and they open and render out fine.
    I'm having these issues and I don't have any plugins installed.
    Re-Installed everything multiple times, trashed preferences, removed plugins from the Application support and still no luck.
    The only thing that works for me is outputting to a PNG or JPEG sequence.
    If I try to render using the Animation preset, It gives the error message.
    I also have been getting a weird "MooV" error message when I try to import certain types of quicktime files. Not all just a few random ones.
    All of this leads me to believe it is a Quicktime issue.
    Please can you help. Other than doing a complete clean operating install, which i am doubting will work.
    Robin Souter

    hey todd,
    good thinking, I was just trying the very same thing. alas when I try to open my AE project in Media Encoder I get the message
    "Could not connect to Adobe After Effects. Please verify that Adobe After Effects and Adobe Dynamic Link components are installed."
    I'm scratching my head, this also worked yesterday.
    Could it be anything to do with de-activation? I have cs5 installed on my workstation in my studio.
    I also have it installed on my laptop at home. do I need to contact Adobe each time I want to use 1 machine or the other?
    Also ever since installing cs5 on my laptop I get the following message each time I launch After Effects (dont know if its connected as I normally just click ok and use AE as normal)
    "Runtime Error! This application has requested the runtime to terminate it in an unusual way.
    Please contact the application's support team for more information"
    or maybe I didn't run the adobe uninstaller cleaner utility to get rid of traces of old versions, before installing cs5 to my laptop
    thanks
    ste

  • Modules fail to load

    Hi there
    I've been away for some time and for some reason i can't get the installation to work .
    When arch boots i get the message that modules fail to load , and afterwards when i try to startx , i get a black screen and nothing happens.
    Also i remember using hal , but now it's not needed . Do i need to add anything else in rc.conf ?
    I only have Modules = (broadcom tg3) and nothing else.
    Thanks for the help

    You probably need those modules, but have you tried removing those two modules just to see if they are the problem?  Once you figure out which one it is, finding a solution will probably be easier.

  • SUNW_piclfrutree PICL plugin module failed

    Has anyone ever see this picld error message after trying to start picld manually? I just had to install the picl packages, fru packages, along with some masf packages to get SNMP working. This worked without any problems on all of our Solaris 8 Netra 440s except this one. It is affecting prtdiag too. I have included some output from my troubleshooting. I have tried unintstalling and reinstalling all of the packages without any progress.
    Message file errors after starting picld
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed
    # uname -a
    SunOS XXXXXXX 5.8 Generic_117350-35 sun4u sparc SUNW,Sun-Fire-V440
    #pkgnfo | grep picl
    system SUNWpiclh PICL Header Files (Usr)
    system SUNWpiclr PICL Framework (Root)
    system SUNWpiclu PICL Libraries, and Plugin Modules (Usr)
    # pkginfo | grep fru
    system SUNWfruid FRU ID Utility and Library (Usr)
    system SUNWfruip FRU ID Platform Modules (Usr)
    system SUNWfruix FRU ID Library (64-bit)
    system SUNWmfrun Motif RunTime Kit
    # for i in SUNWpiclh SUNWpiclr SUNWpiclu ; do
    pkginfo -l $i
    donePKGINST: SUNWpiclh
    NAME: PICL Header Files (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Header Files
    PSTAMP: on28-patch20031120190706
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 4 installed pathnames
    2 shared pathnames
    2 directories
    20 blocks used (approx)
    PKGINST: SUNWpiclr
    NAME: PICL Framework (Root)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Framework init scripts
    PSTAMP: on28-patch20000705132920
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 7 installed pathnames
    4 shared pathnames
    2 linked files
    4 directories
    1 executables
    1 blocks used (approx)
    PKGINST: SUNWpiclu
    NAME: PICL Libraries, and Plugin Modules (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.08.15.00.06
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Daemon, Libraries, prtpicl client and plug-in modules
    PSTAMP: on28-patch20031124203414
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 242 installed pathnames
    67 shared pathnames
    73 directories
    35 executables
    4279 blocks used (approx)
    # for i in SUNWfruid SUNWfruip SUNWfruix SUNWmfrun ; do
    pkginfo -l $i
    donePKGINST: SUNWfruid
    NAME: FRU ID Utility and Library (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID prtfru command and libfru library
    PSTAMP: on28-patch20031120190642
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 14 installed pathnames
    3 shared pathnames
    3 directories
    6 executables
    555 blocks used (approx)
    PKGINST: SUNWfruip
    NAME: FRU ID Platform Modules (Usr)
    CATEGORY: system
    ARCH: sparc.sun4u
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID platform data module and access library
    PSTAMP: on28-patch20031211193309
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 83 installed pathnames
    60 shared pathnames
    60 directories
    4 executables
    359 blocks used (approx)
    PKGINST: SUNWfruix
    NAME: FRU ID Library (64-bit)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID Library (64-bit)
    PSTAMP: on28-patch20031120190646
    INSTDATE: Aug 04 2006 14:19
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 11 installed pathnames
    3 shared pathnames
    3 directories
    4 executables
    616 blocks used (approx)
    PKGINST: SUNWmfrun
    NAME: Motif RunTime Kit
    CATEGORY: system
    ARCH: sparc
    VERSION: 2.1.1,REV=10.1999.12.02
    BASEDIR: /usr
    VENDOR: SunSoft, Inc.
    DESC: Motif 2.1.1 libraries, headers, xmbind and bindings
    PSTAMP: togos19991202021129
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 256 installed pathnames
    6 shared pathnames
    14 directories
    6 executables
    12644 blocks used (approx)
    Bad prtdiag output
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    Prtdiag failed!
    System Configuration: Sun Microsystems sun4u Netra 440
    System clock frequency: 183 MHZ
    Memory size: 8GB
    ==================================== CPUs ====================================
    E$ CPU CPU Temperature Fan
    CPU Freq Size Impl. Mask Die Ambient Speed Unit
    0 1281 MHz 1MB US-IIIi 2.4 - -
    1 1281 MHz 1MB US-IIIi 2.4 - -
    2 1281 MHz 1MB US-IIIi 2.4 - -
    3 1281 MHz 1MB US-IIIi 2.4 - -
    ================================= IO Devices =================================
    Bus Freq
    Brd Type MHz Slot Name Model
    0 pci 66 0 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 3 pci100b,35 (network) SUNW,pci-qge
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/rmc-comm-rmc_comm (seria+
    0 pci 33 13 pci10b9,5229 (ide)
    ============================ Memory Configuration ============================
    Segment Table:
    Base Address Size Interleave Factor Contains
    0x0 2GB 4 BankIDs 0,1,2,3
    0x1000000000 2GB 4 BankIDs 16,17,18,19
    0x2000000000 2GB 4 BankIDs 32,33,34,35
    0x3000000000 2GB 4 BankIDs 48,49,50,51
    Bank Table:
    Physical Location
    ID ControllerID GroupID Size Interleave Way
    0 0 0 512MB 0,1,2,3
    1 0 1 512MB
    2 0 1 512MB
    3 0 0 512MB
    16 1 0 512MB 0,1,2,3
    17 1 1 512MB
    18 1 1 512MB
    19 1 0 512MB
    32 2 0 512MB 0,1,2,3
    33 2 1 512MB
    34 2 1 512MB
    35 2 0 512MB
    48 3 0 512MB 0,1,2,3
    49 3 1 512MB
    50 3 1 512MB
    51 3 0 512MB
    Memory Module Groups:
    ControllerID GroupID Labels
    0 0 -,-
    0 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    1 0 -,-
    1 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    2 0 -,-
    2 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    3 0 -,-
    3 1 -,-
    Truss output after starting picld
    #( /etc/init.d/picld start ; while : ; do
    truss -U /usr/lib/picl/picld -U :: -p `pgrep picld`
    pstack `pgrep picld`
    echo '###################################'
    done )>/tmp/truss.out 2>&1# Output too large to attach..
    # ps -aef | grep -i picld
    root 8171 18519 0 16:45:07 pts/6 0:00 grep -i picld
    root 27299 1 0 15:59:18 ? 0:01 /usr/lib/picl/picld
    root 8167 27296 0 16:45:06 pts/1 0:00 truss -U /usr/lib/picl/picld -U :: -p 27299
    # prtpicl
    prtpicl: picl_initialize failed: Daemon not responding
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    picl_initialize failed: Daemon not responding
    # pgrep picld
    27299
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed

    Has anyone ever see this picld error message after trying to start picld manually? I just had to install the picl packages, fru packages, along with some masf packages to get SNMP working. This worked without any problems on all of our Solaris 8 Netra 440s except this one. It is affecting prtdiag too. I have included some output from my troubleshooting. I have tried unintstalling and reinstalling all of the packages without any progress.
    Message file errors after starting picld
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed
    # uname -a
    SunOS XXXXXXX 5.8 Generic_117350-35 sun4u sparc SUNW,Sun-Fire-V440
    #pkgnfo | grep picl
    system SUNWpiclh PICL Header Files (Usr)
    system SUNWpiclr PICL Framework (Root)
    system SUNWpiclu PICL Libraries, and Plugin Modules (Usr)
    # pkginfo | grep fru
    system SUNWfruid FRU ID Utility and Library (Usr)
    system SUNWfruip FRU ID Platform Modules (Usr)
    system SUNWfruix FRU ID Library (64-bit)
    system SUNWmfrun Motif RunTime Kit
    # for i in SUNWpiclh SUNWpiclr SUNWpiclu ; do
    pkginfo -l $i
    donePKGINST: SUNWpiclh
    NAME: PICL Header Files (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Header Files
    PSTAMP: on28-patch20031120190706
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 4 installed pathnames
    2 shared pathnames
    2 directories
    20 blocks used (approx)
    PKGINST: SUNWpiclr
    NAME: PICL Framework (Root)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Framework init scripts
    PSTAMP: on28-patch20000705132920
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 7 installed pathnames
    4 shared pathnames
    2 linked files
    4 directories
    1 executables
    1 blocks used (approx)
    PKGINST: SUNWpiclu
    NAME: PICL Libraries, and Plugin Modules (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.08.15.00.06
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Daemon, Libraries, prtpicl client and plug-in modules
    PSTAMP: on28-patch20031124203414
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 242 installed pathnames
    67 shared pathnames
    73 directories
    35 executables
    4279 blocks used (approx)
    # for i in SUNWfruid SUNWfruip SUNWfruix SUNWmfrun ; do
    pkginfo -l $i
    donePKGINST: SUNWfruid
    NAME: FRU ID Utility and Library (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID prtfru command and libfru library
    PSTAMP: on28-patch20031120190642
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 14 installed pathnames
    3 shared pathnames
    3 directories
    6 executables
    555 blocks used (approx)
    PKGINST: SUNWfruip
    NAME: FRU ID Platform Modules (Usr)
    CATEGORY: system
    ARCH: sparc.sun4u
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID platform data module and access library
    PSTAMP: on28-patch20031211193309
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 83 installed pathnames
    60 shared pathnames
    60 directories
    4 executables
    359 blocks used (approx)
    PKGINST: SUNWfruix
    NAME: FRU ID Library (64-bit)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID Library (64-bit)
    PSTAMP: on28-patch20031120190646
    INSTDATE: Aug 04 2006 14:19
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 11 installed pathnames
    3 shared pathnames
    3 directories
    4 executables
    616 blocks used (approx)
    PKGINST: SUNWmfrun
    NAME: Motif RunTime Kit
    CATEGORY: system
    ARCH: sparc
    VERSION: 2.1.1,REV=10.1999.12.02
    BASEDIR: /usr
    VENDOR: SunSoft, Inc.
    DESC: Motif 2.1.1 libraries, headers, xmbind and bindings
    PSTAMP: togos19991202021129
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 256 installed pathnames
    6 shared pathnames
    14 directories
    6 executables
    12644 blocks used (approx)
    Bad prtdiag output
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    Prtdiag failed!
    System Configuration: Sun Microsystems sun4u Netra 440
    System clock frequency: 183 MHZ
    Memory size: 8GB
    ==================================== CPUs ====================================
    E$ CPU CPU Temperature Fan
    CPU Freq Size Impl. Mask Die Ambient Speed Unit
    0 1281 MHz 1MB US-IIIi 2.4 - -
    1 1281 MHz 1MB US-IIIi 2.4 - -
    2 1281 MHz 1MB US-IIIi 2.4 - -
    3 1281 MHz 1MB US-IIIi 2.4 - -
    ================================= IO Devices =================================
    Bus Freq
    Brd Type MHz Slot Name Model
    0 pci 66 0 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 3 pci100b,35 (network) SUNW,pci-qge
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/rmc-comm-rmc_comm (seria+
    0 pci 33 13 pci10b9,5229 (ide)
    ============================ Memory Configuration ============================
    Segment Table:
    Base Address Size Interleave Factor Contains
    0x0 2GB 4 BankIDs 0,1,2,3
    0x1000000000 2GB 4 BankIDs 16,17,18,19
    0x2000000000 2GB 4 BankIDs 32,33,34,35
    0x3000000000 2GB 4 BankIDs 48,49,50,51
    Bank Table:
    Physical Location
    ID ControllerID GroupID Size Interleave Way
    0 0 0 512MB 0,1,2,3
    1 0 1 512MB
    2 0 1 512MB
    3 0 0 512MB
    16 1 0 512MB 0,1,2,3
    17 1 1 512MB
    18 1 1 512MB
    19 1 0 512MB
    32 2 0 512MB 0,1,2,3
    33 2 1 512MB
    34 2 1 512MB
    35 2 0 512MB
    48 3 0 512MB 0,1,2,3
    49 3 1 512MB
    50 3 1 512MB
    51 3 0 512MB
    Memory Module Groups:
    ControllerID GroupID Labels
    0 0 -,-
    0 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    1 0 -,-
    1 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    2 0 -,-
    2 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    3 0 -,-
    3 1 -,-
    Truss output after starting picld
    #( /etc/init.d/picld start ; while : ; do
    truss -U /usr/lib/picl/picld -U :: -p `pgrep picld`
    pstack `pgrep picld`
    echo '###################################'
    done )>/tmp/truss.out 2>&1# Output too large to attach..
    # ps -aef | grep -i picld
    root 8171 18519 0 16:45:07 pts/6 0:00 grep -i picld
    root 27299 1 0 15:59:18 ? 0:01 /usr/lib/picl/picld
    root 8167 27296 0 16:45:06 pts/1 0:00 truss -U /usr/lib/picl/picld -U :: -p 27299
    # prtpicl
    prtpicl: picl_initialize failed: Daemon not responding
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    picl_initialize failed: Daemon not responding
    # pgrep picld
    27299
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed

  • Build the main Guest Additions module Failed

    Hi all,
    I am not very sure if I am in the correct forum here. My problem is I cannot install the VirtualBox Guest Additions 4.2.12_84980 on my Oracle Linux 5 update 6_x86_64 bits system. I followed the instructions in a tutorial :
    cd /etc/yum.repos.d/
    wget http://public-yum.oracle.com/public-yum-el5.repo
    yum update
    yum install gcc
    yum install kernel-uek-devel-2.6.32-300.32.1.el5uek
    These steps above all succeeded; but, when I run the installation as below:
    cd /media/VBOXADDITIONS_4.2.12_84980/
    sh ./VBoxLinuxAdditions.run
    I got the error message:
    Build the main Guest Additions module Failed
    (Look at /var/log/vboxadd-install.log to find out what went wrong).
    I have little experience in installing VirtualBox Additions on Oracle Linux. Can anybody pls give me some suggestions? Thanks a lot in advance.

    user571093 wrote:
    Hi all,
    I am not very sure if I am in the correct forum here.No. This forum is "Oracle Database - General Questions". Your question has nothing to do with Oracle Database.
    Your problem is in the cracks between VBox and Oracle Linux. I'd suggest you mark this thread answered, then repost in the Oracle Linux Forum (Oracle Linux
    My problem is I cannot install the VirtualBox Guest Additions 4.2.12_84980 on my Oracle Linux 5 update 6_x86_64 bits system. I followed the instructions in a tutorial :
    cd /etc/yum.repos.d/
    wget http://public-yum.oracle.com/public-yum-el5.repo
    yum update
    yum install gcc
    yum install kernel-uek-devel-2.6.32-300.32.1.el5uek
    These steps above all succeeded; but, when I run the installation as below:
    cd /media/VBOXADDITIONS_4.2.12_84980/
    sh ./VBoxLinuxAdditions.run
    I got the error message:
    Build the main Guest Additions module Failed
    (Look at /var/log/vboxadd-install.log to find out what went wrong).Did you look at that file?
    >
    I have little experience in installing VirtualBox Additions on Oracle Linux. Can anybody pls give me some suggestions? Thanks a lot in advance.When you post in the Oracle Linux forum, be sure to show them the results of this command:
    uname -aThat will be key to which kernel header package to install.

  • After Effects Error: rendering error while writing to file...Output Module failed - 1610153646

    Hi – I’m currently working with someone who is running After Effects 5.5v10.5.0.253 on a PC which is running Windows 7 Ultimate. The computer has just recently been built and the software is newly installed. (ie. a couple of weeks old, max). Up until now, we have been using After Effects with no real issues. But tonight, we started to see the following error message, when trying to render something out:
    “After Effects Error: rendering error while writing to file xxxxx. Output Module failed, the file may be damaged or corrupted -1610153646” – displayed during render, which meant the render failed.”
    We started to review forums to see if we could come up with a fix and tried a few of the more common suggested solutions, including:
    Make sure there are no third-party plug-ins or Windows incompatible elements installed - as it’s a pretty new install, we haven’t added anything except out-of-the box elements.
    Clear the render queue – did this, no change.
    Reinstall Quicktime – did this, no change.
    Reinstall Creative Suite – also no change.
    Check the default program to open .mov files is Quicktime – Quicktime was already the default.
    A bit more detail about the machine...
    Ram is 32gb
    GPU is GeForce GTX 660ti
    250gb soild states
    2tb raid drive
    Any help would be much appreciated. This is now happening on all AE files, even files that worked fine earlier in the week. Other than the AE and QT reinstalls mentioned above, nothing new has been added to the machine this week. On a deadline – so a quick response would be amazing, right about now. Thanks.

    Hi Mylenium- thx for the quick response. We have have tried a bunch of different settings. AVIs work and we can do image sequences too. The only major problem seems to be with Quicktime files. While I appreciate your suggetion to convert with AME - this is only a workaround. Was really hoping for a solution that will fix the problem in After Effects? Heard rumor from a few friends in the biz, that this is a major bug... if possible, some feedback from Adobe product devs or someone with a technical background would be great! Thx.

  • WMI Raw Performance Counter Module Failed Execution Alert

    Hi,
    I have been receiving WMI Raw Performance Counter Module Failed Execution warning alerts from one particular serverin monitoring.
    When I am trying to execute the SQL query using wbemtest, I am getting a result for the same.
    How can I check into this alert & resolve it?
    Alert description: 
    Next call failed Namespace \\.\ROOT\CIMV2 Query SELECT Timestamp_PerfTime,Frequency_PerfTime,TimeStamp_Sys100NS,Name,WorkingSet FROM Win32_PerfRawData_PerfProc_Process WHERE IDProcess=492 HRESULT 0x80041006 Details Out of memory One or more workflows were
    affected by this. Workflow name: Microsoft.SystemCenter.NTService.OwnProcess.WorkingSetMonitor Instance name: Workstation Service Instance ID: {XXXXXXX} Management group: XYZ 

    How much RAM does this machine have? 
    How much CPU? 
    Is it a VM or physical box? 
    Are you seeing high cpu/memory % usage?
    please also refer below links, these might help you in fixing your problem
    http://blogs.technet.com/b/kevinholman/archive/2010/06/09/wmi-leaks-memory-on-server-2008-r2-monitored-agents.aspx
    http://forums.veeam.com/veeam-management-pack-f1/opsmgr-warnings-from-the-vem-t5.html
    Faizan

  • Adobe form terminates gui with "initilization of font server module failed"

    Installed Adobe Live Cycle Designer.
    Now when I try opening any form in SAP guif rom the individula t code say for example PR05, it thorws me out of the gui saying "initilization of font server module failed".
    Why??
    please advise..
    Thanks
    Ven..

    This is an issue with the SAP GUI vs Adobe Reader 9. OSS note 1308147 refers to this. Followed the work around mentioned at
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/plm/adobe9-SAPGUIcrash.
    and it works fine now....

Maybe you are looking for

  • My iPhone 5S was ignored to claim with Thai wireless carrier

    I really confident in Apple product a lot, when Apple releases the new products I feel that I would like to be the owner of them all. Apple is really famous in Thailand, iPhone is the top ranking of product that Thai people would like to be owned. I'

  • TS1424 itunes wont download film star trek. shows error 8008

    Trying to download Star Trek from itunes stores. It fails to download posted error message 8008

  • Generating Customized Compliance Report using SQL Query in SCCM 2007

    In the query , I am wondering how to add a leading zero or 2 to the State Name field.  So if I sort the report by State Name it will be in proper numerical order. Thanks, Peter

  • Late Start in Regions

    Hi Can someone tell me what to do about late first notes in some regions? I've got a bass drum note on beat one of measure one that won't play unless I back it away from beat one 20 ticks or so. It plays okay on cycles or loops but not on the startin

  • Error while upgrading to OS 3.0 GM seed

    Hi, I wanted to upgrade to the OS 3.0 GM seed. I opened Xcode, opened Organizer and choose the new OS file. Suddenly while starting to restore it gave an error: Connected to device, path does not exist. It now only gives that error. My iPhone only sh