Module for StorageTek NAS 5320

Hi All,
Is there any module that can monitor a StorageTek NAS 5320 appliance via Sun Management Center ?
Thanks for answers or advices,
Quentin.

Hello.. I have done searching and see that our NAS has some lookup errors which I see with nfsstat.
I am not able to find out much about these errors. In particular what percent of these errors are "ok" and how
can one find out what server is causing them.
Thanks

Similar Messages

Close() over NFS hangs for 15 seconds on NAS 5320

Summary: We are experiencing long pauses waiting for files to close on NAS 5320.
Hardware:
NFS Server: 5320 NAS S/N ST5320200609190020 Version 4.20 M0 (Build 78)
NFS Clients: SunOS 5.10 Generic_118833-17 sun4u sparc SUNW,Sun-Fire-V240
SunOS mnemo 5.6 Generic_105181-20 sun4u sparc SUNW,Ultra-4
(Various other Solaris & Linux clients)
Symptom:
User copies a tiny file using "cp". The "cp" program hangs for 15 seconds before
normal exit and successful completion. Running "truss" on the "cp" command
reveals that the copy happens nearly instantaneously, and the program goes into
a sleep state waiting for the close() of the output file.
The problem is reproducible regardless of whether the filesystem is NFS hard
mounted or automounted. The problem seems to occur most often if the output
file being written previously existed under the same name, was recently deleted,
and is being recreated by the copy operation.
The problem is reproducible from every NFS client I've tried, both Solaris and Linux.
The problem is only exhibited for filesystems served by the NAS 5320.
Here's a typical truss output exhibiting the behavior. The 15-second hang occurs
after truss prints the line that says "close(4) (sleeping...)":
touch ../../xx ; rm ../../xx
truss cp -p trav_op.c ../../xxexecve("/bin/cp", 0xEFFFF738, 0xEFFFF74C) argc = 4
open("/dev/zero", O_RDONLY) = 3
mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0xEF7B0000
open("/usr/openwin/lib/libc.so.1", O_RDONLY) Err#2 ENOENT
open("/usr/lib/libc.so.1", O_RDONLY) = 4
fstat(4, 0xEFFFF2D4) = 0
mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF7A0000
mmap(0x00000000, 704512, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF680000
munmap(0xEF714000, 57344) = 0
mmap(0xEF722000, 28504, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 4, 598016) = 0xEF722000
mmap(0xEF72A000, 2664, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xEF72A000
close(4) = 0
open("/usr/openwin/lib/libdl.so.1", O_RDONLY) Err#2 ENOENT
open("/usr/lib/libdl.so.1", O_RDONLY) = 4
fstat(4, 0xEFFFF2D4) = 0
mmap(0xEF7A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 4, 0) = 0xEF7A0000
close(4) = 0
open("/usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1", O_RDONLY) = 4
fstat(4, 0xEFFFF0B4) = 0
mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF790000
mmap(0x00000000, 16384, PROT_READ|PROT_EXEC, MAP_PRIVATE, 4, 0) = 0xEF780000
close(4) = 0
close(3) = 0
munmap(0xEF790000, 8192) = 0
stat64("trav_op.c", 0x00024200) = 0
acl("trav_op.c", GETACLCNT, 0, 0x00000000) = 4
stat64("../../xx", 0x00024168) Err#2 ENOENT
open64("trav_op.c", O_RDONLY) = 3
creat64("../../xx", 0644) = 4
stat64("../../xx", 0x00024168) = 0
chmod("../../xx", 0100644) = 0
mmap64(0x00000000, 38425, PROT_READ, MAP_SHARED, 3, 0) = 0xEF770000
memcntl(0xEF770000, 38425, MC_ADVISE, 0x0002, 0, 0) = 0
write(4, " / * - - - - - - - - - -".., 38425) = 38425
munmap(0xEF770000, 38425) = 0
close(3) = 0
close(4) (sleeping...) *** HANGS APPROX 15 SEC ***
close(4) = 0
chown("../../xx", 2048, 525) = 0
chmod("../../xx", 0100644) = 0
utime("../../xx", 0xEFFFEB08) = 0
llseek(0, 0, SEEK_CUR) = 23915
_exit(0)

Hello,
are you aware that this isn't official Sun Support but a user-to-user forum ?
Michael
When will the deficencies/bugs in the Forums software be fixed ?

How to Replace battery Sun Storagetek NAS 5220

Hi, i have one problem: i need to replace the battery in my NAS5220 (with firmware 4.22 M1).
I think that is hot swap and i need the procedure to reset the battery age.
Can you help me?
Thanks!!

solarispro wrote:
Try having a look at the administration document here. It contains the battery age reset procedure.
http://docs.sun.com/source/819-4284-11/index.html
Ok, thanks.
In this manual i have found only this procedure:
Setting the Controller Time and Battery Age
To set the redundant array of independent disks (RAID) controller time and battery age for Sun StorageTek 5310 and Sun StorageTek 5320 NAS appliances and gateway systems. Specify the controller variable as a particular controller number, or 0..N to request all controllers.
* To reset the battery age for one or more controllers, enter:
raidctl set type=lsi target=battery-age ctlr=controller
* To synchronize the time with the server's time for one or more controllers, enter:
raidctl set type=lsi target=ctlr_time-age ctlr=controller
To obtain Help on subcommands, enter raidctl help at the command line.
It's the same for the NAS 5220?
Another question: these batteries are hotswap without any procedure?
Because in this manual i don't have found any procedure.
Thanks!

NAS 5320

Sometimes users cant access cifs shares in NAS 5320. We've re-joined this as computer account in domain. At the same time there were no issues for accessing cifs shares in windows workstation.
Domain Controller - Windows 2003 SP1
12/11/12 14:38:09 I NetrSamLogon[TAI3D\TAI3DHP-008$]: tai3dstorage-01 NOLOGON_W
ORKSTATION_TRUST_ACCOUNT (0x00000199)
12/11/12 14:38:09 N SmbToken: invalid user info
12/11/12 14:38:09 D SmbSessionSetupX[TAI3D\TAI3DHP-008$]: unable to build acces
s token
12/11/12 14:38:22 D SMBGetToken: HEAD2\nobody
12/11/12 14:38:22 D SMBLogon: HEAD2\nobody, 0
12/11/12 14:38:22 D SMBGetToken: HEAD2\nobody
12/11/12 14:38:56 D SMBGetToken: TAI3D\TAI3DHP-008$
12/11/12 14:38:56 D SMBLogon: TAI3D\TAI3DHP-008$, 2
12/11/12 14:38:56 I NetrSamLogon[TAI3D\TAI3DHP-008$]: tai3dstorage-01 NOLOGON_W
ORKSTATION_TRUST_ACCOUNT (0x00000199)
12/11/12 14:38:56 N SmbToken: invalid user info
12/11/12 14:38:56 D SmbSessionSetupX[TAI3D\TAI3DHP-008$]: unable to build acces
s token

Hi,
Sorry I don't have the answer to your question but I'm sure by now you've found your answer and maybe you can help me? I'm having similar problems with my 5320 appliance where it loses connection to the DC. The strange thing is I have a local DC and others in the company network but it will not join the local one. It joins a DC located in another network in a remote location. Because of my limited access I can't compare to determine a difference so my question is more generic: is there any reason or what is the likely reason my NAS device will not connect to the local DC (on the same network) and go to one that is in a remote location?
Any help is appreciated!

Memory modules for Msi Big Bang trinergy

Hey forum,
i want to buy some memory modules for my trinergy mobo because the ones i had earlier also proved to be incompatible. I would like to ask you if there are any memory modules besides the ones recommended from the MSI site concerning my mobo. I am looking for a 2x2 gb ram kit with a heat dispenser so it can work around 1600mHz. Thank you in advance
P.S Is the list on the site the only one? i mean are there any updated versions of it with more high end memory modules tested?

Ideally you would provide us with your fullsystem specs first >>Posting Guide<<
From a memory perspective, the reason these modules have heatspreaders is mostly due to marketing and to impress the potential buyers. The secondary reason is that most manufacturers sell you overvolted and overclocked 1066 or 1333 chips on a 1600 marketed module that needs 1,65V instead of the standard 1,5V. Your memory controller is part of the CPU and natively only supports 1333 at 1,5V.
If you really insist, then at least get yourself a 1600 kit that does this speed at 1,5V. One of the modules that seem to work well are the CMZ4GX3M2A1600C9 from Corsair. From a user perspective, the mem modules from Crucial that you see in my signature come highly recommended as they have been proven to work on the P55 platform whenever used.

Functional module for automatic creation of pur requisition & pur order

hello,
what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
please let me know as early as possible
regards,
rajesh kumar raju

Hi,
Please check with following.
IDOC_INPUT_ACC_PURCHASE_REQUI
IDOC_INPUT_ACC_PURCHASE_ORDER
/ISDFPS/OR_PURCHASE_ORDER_CR
BS01_PURCHASE_DOCUMENT_CREATE
CO_MP_CREATE_PURCHASE_ORDER
Thanks & Regards
Sadhu Kishore

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

How to config Check Digits function module for Student Number Validation

Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.

Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi

Function Module for FB01 Vendor line items postings in 3.1 Version

Hello all,
Is there any Function Module for FB01 Vendor line items postings in 3.1 Version. I do not want to go for BDC. Please suggest.
Thanks,
Subba

Hi,
search for function module ACCPOSTING* or get development class of transaction FB01 and goto SE80, enter development class - and search in function group's function module.
Cheers.
...Reward if useful.

Function Modules for uploading the file

Hi experts ,
I have a requirement to download a file (csv) from my local sytem (say desktop) into an internal table first and then update the contents of the same internal table into the database table.
Can anybody provide me with a sample program for doing the same or at least the name of function modules for the same.
Prompt replies will be rewarded.
TIA
Abhishek

Hi Abhishek,
How to use INSERT Statement..
Check this Sample Program..
TABLES:MARA.
DATA:ITAB LIKE MARA OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
ITAB-MATNR = '123ABCDA'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
ITAB-MATNR = '123ABCDB'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
LOOP AT ITAB.
INSERT MARA FROM ITAB.
MODIFY MARA .
ENDLOOP.

Function modules for the following

Hi,
I want to know the function modules for the following purposes.
1) Check whether a date is valid or not
2) Calculate the no of days between two dates.
Expecting an early response.
Thanks n Regards,
Amit

Hi,
PARAMETERS: p_list LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY ,
 p_list1 LIKE t009b-bdatj OBLIGATORY.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS: p_list2 LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY,
 p_list3 LIKE t009b-bdatj OBLIGATORY.
Calling Function Module for calculating no of days between the
selected period
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list
 par_year = p_list1
 IMPORTING
 par_days = ws_n_days.
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list2
 par_year = p_list3
 IMPORTING
 par_days = ws_n_days1.
For Concatenating the month and year into the date format
 CONCATENATE p_list1 p_list ws_i INTO ws_c_date1.
 CONCATENATE p_list3 p_list2 ws_n_days1 INTO ws_c_date2.
date = ws_c_date1 - ws_c_date2.
In the above sample code the selection screen has month and year as input.
Also check this link
http://www.sapdevelopment.co.uk/tips/date/datehome.htm
Check FM
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
Also for checking valid date:
U can specify the date field as
Select-options: s_date like likp-date(similar to ur requirement)
This itself ceck for the valid date no seperate validation needed.
Thanks & Regards,
Judith.

Function Modules for Data and Time

Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in dd/mm/yyyy or dd.mm.yyyy and time in HH:MM:SS formats.
Thanks in advance

Hi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
If its usefull reward points

Function Module for open Purchase Order & Sales Order?

Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.

hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen

Open module for managing property file and environment variables

Looking for an open module for managing property files and environment variables (like CLASSPATH) set in a shell script. For handeling properties (preserving comments, supporting includes, appending new entries, and more) I have looked at SuperProperties from openadaptor but find certain functionality lacking. As for interfacing with common shell scripts/files containing setting for CLASSPATH, JAVA_HOME, other system/application variables another type of object editor is needed. Maybe JFIG?
Any ideas are greatly welcomed.

You seem wright, you hit a brick wall here with Air to find the location
of the command console on windows...
So in fact I never build an exe tool, but this little problem was a nice
case to test it and I tried it.:
I downloaded monodevelop
-GTK# for .NET 2.12.10*
-MonoDevelop 2.4.2*
from http://monodevelop.com/Download
created a console project and had an exe in 5 minutes !
You can download the findconsole tool and the projectfiles here:
http://greencollective.nl/temp/dump/findconsole_monoproject.zip
findconsole.exe will reveal the path/location of cmd.exe on a windows system.
Cheers,
Latcho

Module for StorageTek NAS 5320

Similar Messages

Maybe you are looking for