Module 'net_rim_b​b_qm_platf​orm' not found on Bold 9900
I purchased a backgammon game from App World and after playing it just once I now get the following message when I try to open the game "Error starting backgammon: Module 'net_rim_bb_qm_platform' not found". I contacted the game developer who told me it had nothing to do with them and that I had to deal with RIM. I have tried uninstalling and re-installing the game and still get the same message. I haven't been able to find any info anywhere so if anyone can help that would be greatly appreciated.
Thanks.
Normally a battery pull will correct this issue so I'm going to recommend you remove your battery while your phone is powered on then replace it a few seconds later.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.
Similar Messages
-
Error initializing ejb-module; Exception javac.exe not found under
Dear all,
I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
/labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
on of your java compiler in server.xml using the <java-compiler .../> tag
Thanks in advance!
Best Regards,
Chris CHIUDear Chris,
The answer lies in the error message you got, namely:
please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
Good Luck,
Avi. -
Hello experts,
I have installed Crystal Reports 2008 (not BO Edge) and BusinessObjects Integration Kit for SAP on my laptop and I try to connect my crystal reports to the SAP ECC 6.0 data source. After establishing a connection I can see the following groups in the Available Data Sources: CL [Data Clusters], DD [Data Dictionary] and FN [ABAP Function modules]. However when I try to open them, I get messages:
- Database Connector Error: u2018Function module u201C/CRYSTAL/GET_OSQL_OBJECT_LISTu201D not found.u2019
- Database Connector Error: u2018RFC_INVALID_HANDLEu2019
Could you please give some advice, what is missing?
Best regards,
MarcinHi Ingo,
The Installation Guide u201CBusiness Objects Integration Kit for SAP u2013 Installation and Configurationu201D (created on 01.10.2008, where you are the author) that is listed on the integration kit download page:
https://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]
refers to BusinessObjects Enterprise / SAP NetWeaver BI combination.
As I am interested in the Crystal Reports 2008 / mySAP ERP combination I searched for further documents and could find the following, where the ABAP transports are described:
u201EBusiness Objects XI Integration for SAP Solutions Installation Guideu201D issued on 03.06.2008
and
u201EBusiness Objects XI Integration for SAP Solutions Installation and Administration Guideu201D issued on 02.12.2008.
Is one of these documents the u201Einstallation guide for the SAP Integration Kitu201D that you mentioned? If not, could you please send the link to the installation guide you mean, where the ABAP transports for Crystal Reports 2008 / mySAP ERP combination are described? That would be very helpful.
Marcin -
Xorg: module "glx" and commands not found???
Hello, all.
I'm fairly new to Linux but I'm not a total noob. I have FC6 on my laptop and am currently trying to get a GUI working for Arch on my desktop.
I pacman-ed hwd, and ran it to create a Xorg.conf, and upon running it I get the following errors:
(EE) Failed to load module "glx" (module does not exist, 0)
/etc/X11/xinit/xinitrc: line 28: twm: command not found
/etc/X11/xinit/xinitrc: line 29: xclock: command not found
/etc/X11/xinit/xinitrc: line 30: xterm: command not found
/etc/X11/xinit/xinitrc: line 31: xterm: command not found
/etc/X11/xinit/xinitrc: line 32: exec: xterm: not found
waiting for X server to shut down FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing.
The last comment it makes I know isn't critical, so I'm not worried about that. But I need help with the "glx" part and the commands not found.
Thanks in advance.Did you installed libgl-dri? If not install it, and it will fix glx problems.
For the command not found, you need to create a ~/.xinitrc file. Before, you'll need to install the WM/DE that you want to use.
There is a sample file in the wiki: http://wiki.archlinux.org/index.php/Sta … ents_HOWTO -
Error in Dialog Module - INCLUDE report "%_HR9066" not found
Hi,
After upgrade from 4.6B to ECC 6.0.When i display/create/change Custom Infotype 9072 in transaction PA30. i encounter a dump stating
INCLUDE report "%_HR9066" not found. It occurs when the program goes for CALL DIALOG... in the SAP standard program.
Do advice on how to resolve this issueHi Chayan,
9066 is the custom infotype .
After upgrading check for the following things which are related to infotype :
1) Go to se51 and check for Program MP906600 and screen 2000 exist .If not there is a problem in calling the screen
2)Go to se11 and check whether the table PA9066 and structure P9066 exist
3)Check whether the infotype is assigned to the Infotypes in spro .(Optional)
If everthing is suceessful , the infotype exist in the system . If not one of the objects might miss from the above list .
Regards,
Gajalkshmi -
CDMC - Function Modules not Found
Hi,
Initially the Solution manager ST level is 23 and CDMC clearning analysis worked will with ERP satellite system.
Later, Solution manager has upgraded with 24 and not able to actiavate the statistics and unable to perform clearning analysis.
Below are 2 known errors(there could be more),
Function Modules "CNV_CDMC_CC_GET_COMPS_OF_SYS" and "CNVCDMC_OBJECT_EXISTENCE_CHECK" not found.
Did any face this similar issues ?
Do we need to consider any component upgrade at Satellite systems with respect these upgrades in solution manager ?
Note: 3 of components are upgraded in solution manager which are ST , ST-A/PI and ST-SER...
Regards,Hello,
If you are on ST-PI SP03 this note is needed in all the participating systems of your CDMC project
1509340 - Collective Note with all corrections for CDMC (ST-PI SP03)
Also pleae review SAP Note 1348772 - CDMC Corrections - Composite SAP NotePlease look under Solution for Support Package 03 relevant Notes:
This will ensure that your system works without errors!
Regards,
Paul -
I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.
-
G_G_IDOC_REC_ZZINCOT function module not found in ECC 5.0
i am getting the dump.
the fuction module is not presend in ECC 5.0
Runtime Errors CALL_FUNCTION_NOT_FOUND
Exceptn CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 04/05/2007 07:13:25
ShrtText
Function module "G_G_IDOC_REC_ZZINCOT" not found.
What happened?
The function module "G_G_IDOC_REC_ZZINCOT" was called, but cannot be
found in the Function Library.
Error in ABAP application program.
The current ABAP program "SAPLGUIF" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC',
was neither
caught nor passed along using a RAISING clause, in the procedure
"IDOC_INPUT_GLROLL" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The program "SAPLGUIF" contains a CALL FUNCTION statement. The name
of the function module to be called is "G_G_IDOC_REC_ZZINCOT".
No function module exists with the name "G_G_IDOC_REC_ZZINCOT".
All function modules are stored in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Particular attention should be paid
to upper/lower case and underscores ("_")
b) Transport error
c) If an enqueue/dequeue module has been used, the lock object
may not have been activated (ABAP Dictionary)
may not have been activated (ABAP Dictionary).
How to correct the error
Check the last transports to the R/3 System.
Is the program "SAPLGUIF" currently being changed?
If an enqueue/dequeue module is involved, is the activation
of the lock object missing in the ABAP/4 Dictionary?
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CALL_FUNCTION_NOT_FOUND" CX_SY_DYN_CALL_ILLEGAL_FUNCC
"SAPLGUIF" or "LGUIFU05"
"IDOC_INPUT_GLROLL"
Function modules with names similar to "G_G_IDOC_REC_ZZINCOT":
G_G_IDOC_REC_COFIT
G_G_IDOC_REC_FILCT
G_G_IDOC_REC_ECMCT
G_G_IDOC_REC_GLPCT
G_G_IDOC_REC_GLT0
G_G_IDOC_REC_SECURE
G_POSTING_ZZINCOT
G_G_IDOC_SEND_COFIT
G_G_IDOC_SEND_ECMCT
G_G_IDOC_SEND_SECURE
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"IDOC_INPUT_GLROLL"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "d48ix100"
Network address.......... "151.162.153.62"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C65EFD4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 2
Short dump setting....... "full"
Database server.......... "d48ix100"
Database type............ "ORACLE"
Database name............ "D48"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Nov 5 2006 20:46:58"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 8379856
Heap..................... 0
Page..................... 16384
MM Used.................. 2530176
MM Free.................. 1657232
SAP Release.............. "640"
User and Transaction
Client.............. 010
User................ "OS0730"
Language key........ "E"
Transaction......... "YICUPLD "
Program............. "SAPLGUIF"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLGUIF" in "IDOC_INPUT_GLROLL".
The main program was "Y21091IRECON ".
The termination occurred in line 65 of the source code of the (Include)
program "LGUIFU05"
of the source code of program "LGUIFU05" (when calling the editor 650).
Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_FUNC"
occurred in the
procedure "IDOC_INPUT_GLROLL" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLGUIF ". Its source code starts in line 5
of the (Include) program "LGUIF$05 ".
Source Code Extract
Line SourceCde
35
36 *Prüfen, ob Customizing richtig eingestellt ist
37 CHECK EXIT IS INITIAL.
38 PERFORM CHECK_CUSTOMIZING USING IDOC_NUMBER.
39
40 *Für Einzelposten neue Belegnummern vergeben
41 CHECK EXIT IS INITIAL.
42 PERFORM NEW_DOCUMENT_NUMBER USING IDOC_NUMBER
43 IDOC_CONTRL-MESTYP.
44
45 *Füllen der Segmentdaten
46 CHECK EXIT IS INITIAL.
47 CLEAR IDOC_SEGMENT. REFRESH IDOC_SEGMENT.
48
49 LOOP AT IDOC_DATA WHERE DOCNUM EQ IDOC_NUMBER.
50 IDOC_SEGMENT = IDOC_DATA.
51 APPEND IDOC_SEGMENT.
52 ENDLOOP.
53
54 *Name des zu rufenden Funktionsbausteines ermitteln
55 ROL_FUNCNAME = 'G_G_IDOC_REC_$'.
56 PERFORM BUILD_ROL_FUNCNAME USING IDOC_NUMBER ROL_FUNCNAME.
57
58 *Funktionsbaustein zum Empfangen des IDOC's aufrufen
59 *Wenn Sender 4.0 System -> Nimm' TAB30, sonst altes TAB
60 IF NOT E1GLTTF-TAB30 IS INITIAL.
61 L_TAB30 = E1GLTTF-TAB30.
62 ELSE.
63 L_TAB30 = E1GLTTF-TAB.
64 ENDIF.
>>>>> CALL FUNCTION ROL_FUNCNAME
66 EXPORTING
67 MESTYP = IDOC_CONTRL-MESTYP
68 DOCNUM = IDOC_NUMBER
69 TAB = L_TAB30
70 TABLES
71 IDOC_SEGMENT = IDOC_SEGMENT
72 IDOC_STATUS = IDOC_STATUS
73 RETURN_VARIABLES = RETURN_VARIABLES.
74
75 ENDLOOP.
76
77 *Keine IDOC's empfangen
78 IF SY-SUBRC NE 0.
79 RAISE WF_ERROR_PROCESS.
80 ELSE.
81 *Prüfen, ob Fehler bei der Verarbeitung der IDOCs aufgetreten sind
82 LOOP AT IDOC_STATUS WHERE MSGTY = 'A'
83 OR MSGTY = 'E'.
84 EXIT.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 2
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY &I think that the FM is a customized one. Correct me if I am wrong. It is quite possible that certain FM's might have been missed out while the new system is built. Here I am assuming that the you are doing an upgrade.
If whatever, I've mentioned above is correct, you can copy the FM and its other components from the old system into the new one, to rectify the error -
Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update
Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors CALL_FUNCTION_NOT_FOUND
Exception CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 25.05.2011 14:43:26
Short text
Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
The function module "GM_DOCUMENT_REVERSE" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLRWCL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLRWCL" contains the CALL FUNCTION statement.
The name of the function module to be called is "GM_DOCUMENT_REVERSE".
No function module exists with the name "GM_DOCUMENT_REVERSE".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attention to
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
How to correct the error
Check the last transports to the SAP System.
Is the program "SAPLRWCL" currently being changed?
If an enqueue/dequeue module is involved, is the activation
of the lock object missing in the ABAP/4 Dictionary?
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
"SAPLRWCL" or "LRWCLF10"
"CALL_DISPATCHER_STORNO_R"
Function modules with names similar to "GM_DOCUMENT_REVERSE":
GM_DOCUMENT_CLOSE
GM_DOCUMENT_RECORD
GM_DOCUMENT_DELETE
GM_DOCUMENT_POST
GM_DOCUMENT_CHECK
G_DOCUMENT_RECORD
GJ_DOCUMENT_RECORD
GM_DOCUMENT_PROJECT
GET_DOCUMENTS
GM_DOCUMENT_DISPLAY
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PMHi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma. -
I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
It says that module Puma15Top was not found.
But this module is a NI property and is automatically compiled by NI Compiler.
The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
Does anyone have any idea how to solve this problem? Or have you experienced some like this?
Following error log:
### XstSynthesis ###
Puma15Top
Reading design: Puma15Top.prj
=========================================================================
* HDL Compilation *
=========================================================================
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
Entity <CLUC001_Conf> compiled.
Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
Entity <CLUC001_CLIP> compiled.
Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors : 2 ( 0 filtered)
Number of warnings : 0 ( 0 filtered)
Number of infos : 0 ( 0 filtered)
Process "Synthesis" failed
Thanks in advanced!Hi Guilherme,
Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
Project: T_old.lvproj
Target: F (RIO0, PXI-7951R)
Build Specification: I_2
Top level VI: I.vi
Compiling on local compile server
Compilation Tool: Xilinx 11.5
Start Time: 2/9/2014 18:03:51
Run when loaded to Fpga: FALSE
JobId: z8Cq8B4
Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
Compilation failed due to a Xilinx error.
Details:
ERROR:Xst:2472 - Top module <Puma15Top> was not found.
ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
-->
Total memory usage is 149596 kilobytes
Number of errors : 2 ( 0 filtered)
Number of warnings : 0 ( 0 filtered)
Number of infos : 0 ( 0 filtered)
Process "Synthesis" failed
Start Time: 18:03:51
End Time: 18:05:19
Total Time: 00:01:27,414
Best,
JEMP -
"Module not found" in Apple Mail
Hi all,
Many times when I edit a new message in Apple Mail, images do not appear after I drag them to the new email. Instead, a sentence appears. My System is in Spanish language and I haven't had the chance to see it in English but it is something like "Module not found".
This message, instead of attached images, appears randomly so it's very difficult for me to say why is this happening. It happens in some emails I receive so I have to ask them to send them over again. In some emails received with this problem, the images appear time after if I check them back again.
I deleted and added again my email accounts, but this didn't help. I use MobileMe and Gmail.
If someone in this forum can help me or has got a clue about this, is very frustrating as I'm a graphic designer and there are attached images in almost every email I send or receive.
Thanks a lot!Hola Carola!
That's what I'm talking about! I work as a Graphic Designer and it's quite absurd how I can not appreciate the images my clients send me to show changes or reviews inside the email's body.. it's not just sending but reading the images the issue remains.
You like me (as many) don´t have enought time to reset or re-install the entire operative system (where the Apple mail is packaged) to fix such a basic problem.
Apple had closed other discussions like this one with no response.
-La verdad no entiendo que exista este detalle tan básico para un ordenador hecho para el sector creativo-
Estoy creando un hashtag en twitter #modulenotfound a ver si consigo algo por ahi.. Saludos desde Madrid -
I am trying to use linux-lts but get this error, I'm using rEFInd. I am able to boot the standard arch kernel, but when selecting the other entry in refind I just get the error.
Warning: /lib/modules/3.14.17-1-lts/modules.devname not found - ignoring
The file does exist though.I sorted it, though not exactly as I want it. I had to change the initrd line in /boot/refind_linux.conf to be initramfs-linux-lts.img, I had previously copied the boot line and created a new one with that initrd line, but that didn't work. As I have things now I can only boot the lts kernel, if I want to change to the other I need to manually change that line before rebooting.
-
Error: "FATAL: Module oracleasm not found" in Red Hat 6
Hi all:
OS.....: Red Hat 6.5 (64 bits)
I am preparing to install an 12c RAC in a Red Hat 6.5. While configuring the ASMLib, i got the following error while executing "/usr/sbin/oracleasm init":
May 2 18:23:20 oraprd01 modprobe: FATAL: Module oracleasm not found.
I configure the Oracle YUM Repository and installed the "kmod-oracleasm" package. And in the link (Oracle ASMLib Downloads for Red Hat Enterprise Linux Server 6) i got the "oracleasmlib" and "oracleasm-support" packages, as you can see below:
[root@oraprd01 binarios]# rpm -qa | grep -i oracleasm
kmod-oracleasm-2.0.8-4.el6_6.x86_64
oracleasm-support-2.1.8-1.el6.x86_64
oracleasmlib-2.0.4-1.el6.x86_64
My kernel is:
Linux oraprd01 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux
My Red Hat version is:
[root@oraprd01 binarios]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.5 (Santiago)
Why am i getting the above error while trying to init the oracleasm module? What am i doing wrong?
Thanks in advance.Problem solved.
I installed an older version of the kmod-oracleasm (kmod-oracleasm-2.0.6.rh1-3.el6_5.x86_64) downloaded from Red-Hat Customer Portal. Now the ASM module is loaded. -
Error Function module " " not found in Smartforms
Hi all,
Please help me out .
I created the form using the smartforms, check it and activated it. I can see the unique function module is assigned to the form. I wrote the ABAP program and use function module SSF_FUNCTION_MODULE_NAMEand also define data types.
when I called the function module fm_name for passing values and tables from program to smartform. This is working perfectly in development server but in production it giving error like Function module " " not found.
Below I m pasting my code.
*& Report ZCASHJOURNAL *
REPORT zcashjournal .
TABLES: bseg.
DATA: FM_NAME TYPE rs38l_fnam.
DATA:BEGIN OF it_bseg OCCURS 0.
INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg.
DATA:BEGIN OF it_bseg1 OCCURS 0.
INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg1.
DATA: gv_amt_in_words TYPE spell,
gv_word TYPE spell-word,
gv_decword TYPE spell-decword.
DATA:BEGIN OF gt_bkpf OCCURS 0.
INCLUDE STRUCTURE bkpf.
DATA:END OF gt_bkpf.
DATA:bktxt TYPE bktxt.
DATA:waers TYPE waers.
DATA:belnr TYPE belnr_d.
DATA:werks TYPE bukrs.
DATA:desc TYPE butxt.
DATA:awkey TYPE awkey.
DATA:docno TYPE matnr.
DATA:cajo TYPE awkey.
DATA:desc1 TYPE butxt.
DATA:dmbtr TYPE dmbtr.
SELECTION-SCREEN BEGIN OF BLOCK b2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_belnr.
SELECTION-SCREEN POSITION 28 .
PARAMETERS : s_belnr TYPE bseg-belnr .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_werks.
SELECTION-SCREEN POSITION 28 .
PARAMETERS: s_werks TYPE werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECT * FROM bkpf
INTO CORRESPONDING FIELDS OF TABLE gt_bkpf
WHERE belnr LIKE s_belnr
AND bukrs LIKE s_werks.
IF NOT gt_bkpf[] IS INITIAL.
SELECT * FROM bseg
INTO CORRESPONDING FIELDS OF TABLE it_bseg
FOR ALL ENTRIES IN gt_bkpf
WHERE bukrs EQ gt_bkpf-bukrs
AND belnr EQ gt_bkpf-belnr
AND shkzg EQ 'S'.
ENDIF.
LOOP AT gt_bkpf.
bktxt = gt_bkpf-bktxt.
waers = gt_bkpf-waers.
belnr = gt_bkpf-belnr.
werks = gt_bkpf-bukrs.
awkey = gt_bkpf-awkey.
docno = awkey+0(10).
cajo = awkey+10(4).
ENDLOOP.
LOOP AT it_bseg.
dmbtr = it_bseg-dmbtr.
ENDLOOP.
IF s_werks EQ '65'.
desc = 'JCBML - Heavy Equipments'.
ENDIF.
IF cajo EQ '0001'.
desc1 = 'PETTY CASH PLANT II'.
ENDIF.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = dmbtr
currency = waers
filler = space
language = sy-langu
IMPORTING
in_words = gv_amt_in_words
EXCEPTIONS
not_found = 1
too_large = 2
OTHERS = 3.
IF sy-subrc EQ 0.
MOVE : gv_amt_in_words-word TO gv_word,
gv_amt_in_words-decword TO gv_decword.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZCASHRECPT'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = 'ZCASHRECPT'
variant = ' '
direct_call = ' '
IMPORTING fm_name = lf_fm_name
EXCEPTIONS no_form = 1
no_function_module = 2.
*v_vbeln = S_VBELN-low.
CALL FUNCTION FM_NAME
EXPORTING
bktxt = bktxt
waers = waers
belnr = belnr
werks = werks
desc = desc
docno = docno
cajo = cajo
desc1 = desc1
dmbtr = dmbtr
gv_word = gv_word
TABLES
T_ZDEB = it_bseg
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Hi Rakesh,
Check two things
1. Program tranpsorted to production without any error in request log.
2. Smartform tranpsorted to production without any error in request log and without renaming / misspelling it.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZCASHRECPT'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Also try to uncomment the Message id part and it will show some meaningful message.
And to check whether actaually fucntion module is generated or not goto smartforms ->Smartform name -> Display -> Environment->Fucntion module name . if this is blank try to retransport smartform.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Pls help in WEBDYNPRO Function Module 'RFC_START_PROGRAM' not found error
Dear Friends,
While i am calling one function module in webdynpro the follwing erroe is coming.
Error:-
Function Module 'RFC_START_PROGRAM' not found error
Code:-
CALL FUNCTION 'ZUPDATE' DESTINATION 'PCNCLNT300'
EXPORTING
im_material = item_matnr
im_vornr = item_vornr
im_sheet = item_sheet
IMPORTING
value = ZMESSAGE .Hi,
try declarig variable of type rfc_dest
data: lv_dest type rfc_dest.
call....
destination lv_dest
offcourse make sure your rfc destination has that name in sm59
and you have the corect authorizations to your user in the remote system
Are you btw sure that there is no screen action called inside
the function module? popup or something? because you cannot
call functions that have screen interaction like in sapgui
grtz,
Koen
Maybe you are looking for
-
Hi all, i am not able to add URL of my website to my profile ........Please help [link removed]
-
How can I change the email for the Apple ID
How can I change my email for my Apple ID
-
Sharing a PPT - using Skype for teaching
Hello. I have an online teaching school, teaching kids in China with teachers in the UK. I currently use Cisco Webex as its functionality for teaching is great, giving me PPT sharing ability and tools to draw and highlight on the PPT slides which is
-
Every time i try to use an app it closes and returns to my home screen.
what do i do when every time i try to use an app it closes and returns to my home screen.
-
Unable to re-install 10.4 onto original flat-panel iMac
After 10.4.7 update trashed my original iMac (another long story!!) I now find that re-installing 10.4 from full install disk fails repeatedly about two thirds through. I have tried the following ; Used disk utilities to completely erase hard disk ov