Module PI 7.11 error

You can goto Message Monitoring in RWB and choose to monitor message via the adapter engine.
Here you should be able to find a detailed log.
Also to have more info on whats going wrong in the module, it is advised to write adapter logs/traces within the module.

Hi Shabarish,
thanks for your reply.
I already looked at the message monitoring in RWB . Unfortunately there is no message available. Obviously process crashed in the communication channel before any message is sent or audit log entry is created. I´m not sure if my module is even accessed at all.
logs and traces, this sounds quite good.
Could you give me some advice how to add/create a log or trace entry?
Where do I find the log on the server, and how could I access it SAP NetweaverAdminstrator?!?
Kind regards
Jochen

Similar Messages

Error when starting Netscape Calendar Server: Module: , Label: 355, Service error: #0x13209

When starting Netscape Calendar Server, the following error message appears:
 
Module: , Label: 355, Service error: #0x13209

The three ACIs listed below need to be present in the Directory Server in order
for Calendar server to work properly. Check the properties on the Base DN to
verify that the following ACIs exist. If they are not present, you will need
to add them, and the Base DN will need to be modified for your enviroment.

<OL>
<LI>ACI for allowing users to modify their own entries. 

(targetattr = "*")(version 3.0; acl "Allow self entry modification";
allow (write)userdn = "ldap:///self";) 

<LI>ACI for allowing anyone permissions to Read, Search, and Compare. 

(target="ldap:///o=basedn.com") (targetattr != "userPassword") (version
3.0; acl "Anonymous access";
allow (read, search, compare) userdn = "ldap:///anyone";) 

<LI>ACI for allowing Calendar Server admins Write access to the Base DN
(this is necessary in order for admins to add users and resources to the node).
 
(target="ldap:///o=basedn.com") (targetattr = "*") (version 3.0; acl
"Calendar Administrators Group"; 
allow(all) groupdn = "ldap:///cn=Calendar Server Admins,ou=Netscape
Servers,o=basedn.com";) 
</OL>

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Pls help in WEBDYNPRO Function Module 'RFC_START_PROGRAM' not found error

Dear Friends,
While i am calling one function module in webdynpro the follwing erroe is coming.
Error:-
Function Module 'RFC_START_PROGRAM' not found error
Code:-
CALL FUNCTION 'ZUPDATE' DESTINATION 'PCNCLNT300'
    EXPORTING
      im_material = item_matnr
      im_vornr    = item_vornr
      im_sheet    = item_sheet
IMPORTING
      value = ZMESSAGE .

Hi,
try declarig variable of type rfc_dest
data: lv_dest type rfc_dest.
call....
destination lv_dest
offcourse make sure your rfc destination has that name in sm59
and you have the corect authorizations to your user in the remote system
Are you btw sure that there is no screen action called inside
the function module? popup or something? because you cannot
call functions that have screen interaction like in sapgui
grtz,
Koen

Compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

Hi,
I am getting below wrror while accesing the Ecel:
compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

IIRC essbase is a financial reporting add-in (Hyperion, or something similar?).
This message is telling you that the add-in is not compatible with your current software. You should check with the vendor who provided the essbase add-in. Tell them what version of windows and Excel (and maybe Hyperion) you are using, and get a compatible
version from them...
If you do not need or run essbase/hyperion/etc then you should just remove/disable the add-in. If it doesn't show in your add-in menu, then you may have to do a repair installation or re-install Excel

"si è verificato un errore durante la modifica dei moduli" questa è la schermata errore che mi da quando installo adobe lightroom su un mac apple....

si è verificato un errore durante la modifica dei moduli" questa è la schermata errore che mi da quando installo adobe lightroom su un mac apple....

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Can't open Reader V9. Says part of suite (CS4 Web Design), need to open other module. but getting error message 148.3

I'm running Windows 8.1. I had to create a new account identity because of some corrupted files. Now I can't open Reader V9. Message comes up saying it's part of a Suite (CS4 Web Design) and I need to open other module first. I tried opening Dreamweaver, got error message 148.3 and program closes, says to contact customer support. My CS4 Seb design suite is old and I've since gotten PS Extended CS5 and PS Extended CS6, but not a whole Suite. Perhaps the license needs to be re-entered but the program closes before I can do anything. Please advise.

What is your operating system? Can you post a screenshot of that message: https://forums.adobe.com/thread/1070933
I also think you should use a newer Reader version on Windows 8.x, i.e. 10.1.10 or 11.0.07.

Function Module RH_UPDATE_INFTY throwing odd error

I am trying to update a relationship using this FM, however I keep getting the error "No input help is available" which I assume is a false-negative.
I have traced the code through and the error is being thrown here:
    PERFORM RE777Z_RA(MSTT777Z) USING                      "VWMZB3A
            PPLOG-OTYPE PPLOG-INFTY PPLOG-SUBTY PPLOG-VDATA(2)
            PPPAR-TIMCO PPPAR-ADDCO PPPAR-SCLAS SUBRC.
    IF SUBRC GT 0.
      UI_SUBRC = 16.
      EXIT.
    ENDIF.
UI_SUBRC is getting set to 16, and it is failing. I have been trying for hours to get this and other related FMs to work correctly without luck. I managed to get RH_INSERT_INFTY to work, however it is not really acting as I want it to; hence this FM. The insert FM splits the records if you make an update to enda/begda which is undesirable. This thread details the problem and ther was no posted solution overwriting records in hrp1000
Here is what I have:
DATA ls_p1001 TYPE p1001.
DATA lt_p1001 TYPE STANDARD TABLE OF p1001.
DATA ls_padd2 TYPE padd2.
MOVE-CORRESPONDING is_dlgt_rprt TO ls_p1001.
APPEND ls_p1001 TO lt_p1001.
CALL FUNCTION 'RH_UPDATE_INFTY'
    EXPORTING
      vtask               = 'S'
*     order_flg           = 'X'
*     commit_flg          = 'X'
*     authy               = 'X'
*     pppar_imp           = ''
*     old_tabnr_new_langu = 'X'
*     repid               = sy-cprog
*     form                = ''
*     keep_lupd           = ''
*     workf_actv          = 'X'
    TABLES
      innnn               = lt_p1001
*     ILFCODE             = ILFCODE
    EXCEPTIONS
      error_during_update = 1
      no_authorization    = 2
      repid_form_initial = 3
      corr_exit           = 4
      OTHERS              = 5.

Hi,
Please find documentation below:
FU RH_UPDATE_INFTY
Text
Change Infotype Records
Functionality
With this function module you can change multiple infotype records for OM objects from Personnel Planning database tables (HRPnnnn). The infotype tables of the table parameter INNNN must all have the structure Pnnnn (logical structure for the infotype nnnn). The records you want to change must exist in the Personnel Planning database tables. If not, this triggers the exception ERROR_DURING_UPDATE.
The values of the parameter VTASK (update type) mean the following:
- 'D' -> update in dialog
- 'S' -> synchronous update via the update task
- 'V' -> asynchronous update via the update task
- 'B' -> internal update in buffer only, no DB update
In HR applications the parameter should be set to 'D' for update in dialog. If there are multiple operations that logically belong together to be updated internally in the buffer first and then saved together to the database, you should set the parameter in each case to 'B' for internal update in buffer only, no DB update. The DB update is then executed by calling the function module 'RH_UPDATE_DATABASE'.
Parameters
VTASK
ORDER_FLG
COMMIT_FLG
AUTHY
PPPAR_IMP
OLD_TABNR_NEW_LANGU
REPID
FORM
KEEP_LUPD
WORKF_ACTV
INNNN
ILFCODE
Exceptions
ERROR_DURING_UPDATE
NO_AUTHORIZATION
REPID_FORM_INITIAL
CORR_EXIT
Thanks,
Sriram Ponna.

Function Module as Datasource loading error

Hi,All
I use function module as datasource and create a fm in function group: RSAX
But when i loading data from the DS , it display :
Error occurred in the data selection
Code:
DATA: l_s_select type srsc_s_select,.
statics: s_s_if type srsc_s_if_simple,
         s type i.
if i_initflag = 'X'. " determine the selection fields and values
append lines of i_t_select to s_s_if-t_select.
s_s_if-requnr = i_requnr.
s_s_if-dsource = i_dsource.
s_s_if-maxsize = i_maxsize.
append lines of i_t_fields to s_s_if-t_fields.
append lines of i_t_fields to s_s_if-t_fields.
else. "fill the result as e_t_data
if s = 0.
add one line to the itab for test
         E_T_DATA-KOKRS = 'HT01'.
         append E_T_DATA.
         s = s + 1.
else.
     raise no_more_data.
endif.
endif.
ENDFUNCTION.
The function is all right i think

Hi, Chivukula
   haha , i forgot to select the passvalue in table tab , after check, it's Ok
Thanks for your time
Terry Ni
Kind Regards

When executing Finance Module, I am getting error in Workflow

Hi,
When I started workflow for financial module, It gets stuck at SILOS:SIL_InsertRowInRunTable workflow. I dont know what is the problem actually. I try to change user name for integration services but it wont work.
Please help me out in this problem as i am new to OBIA and Informatica.
This is the log file for my error...
+2010-06-30 12:05:08.939 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:(Source : FULL Target : FULL) has started.+
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Request to start workflow : 'SIL_InsertRowInRunTable' has completed with error code 7
Error Message : You used an invalid username or password.
Command Used: pmcmd startworkflow -sv BIAPPS_INT -d Domain_BIDPOOLW42S0004 -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.0\server\infa_shared\SrcFiles\FlatFileConnection.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Workflow Message:
+=====================================+
STD OUTPUT
+=====================================+
Informatica(r) PMCMD, version [8.6.0], build [178.0613], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Wed Jun 30 12:05:13 2010
+ERROR: Failed to authenticate login. [PCSF_10342] [PCSF_10342] Exception occurred: [[AUTHEN_10000] The Service Manager failed to authenticate user [Administrator] in security domain [Native].].+
Disconnecting from Integration Service
Completed at Wed Jun 30 12:05:13 2010
+=====================================+
ERROR OUTPUT
+=====================================+
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:179)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:585)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
+(Number of retries : 1)+
pmcmd startworkflow -sv BIAPPS_INT -d Domain_BIDPOOLW42S0004 -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.0\server\infa_shared\SrcFiles\FlatFileConnection.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
+2010-06-30 12:05:13.548 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:(Source : FULL Target : FULL) has finished execution with Failed status+

Looks like invalid Informatica credentials.
Try to issue a pmrep connect with the same credentials that you have entered in DAC.
HTH,
AW

RFC Function module executing in tasks error

Hi Gurus,
I have a rfc enabled function module that I am executing in tasks . The first two passes went correct but the third pass gave the shortdump: Communication failure.
What can be done to correct this .
A RAISE statement in the program "SAPLYQM_PLANT_REL" raised the exception
condition "COMMUNICATION_FAILURE".
Since the exception was not intercepted by a superior
program, processing was terminated.
>>>>>>CALL FUNCTION 'YQM_SAMPLE_RELEASE_TASKS' starting new task 'FUNC1'
            destination 'NONE'
             performing set_function1_done on end of task
     EXPORTING
       I_PHYNR      = i_PHYNR
       I_YYPREPDATE = i_YYPREPDATE
       I_REL        = I_REL
     TABLES
       T_RETURN     = t_RETURN.
   wait until functioncall1 = done.
Thank you .

Hi,
the error COMMUNICATION FAILURE occurs if a server is unavailable for processing of the task or possibly there is no free processes available.
Check this link.
It has a good example how to handle teh error.
[http://saphelp.border-states.com/EN/fa/096e92543b11d1898e0000e8322d00/frameset.htm]
Regards,
Ankur Parab

Module Pool (tabstrip control Error : )

I am trying to activate tabstrip control in module pool but error is coming like no sub screen is assigned to tabstrip pushbutton
tab12.
my main screen is : 0221
flow logic for 0221 is below :
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0321'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0322'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
and 0321 and 0322 is subscreen and i also gave ref field sub1 and sub2 .
can you plz help me to solve the problem ?

Hi,
yes i created sub screen. i am going to explain what i have done .
step : i created screen 200 (i choose subscreen)and inside 200 i put tabstripcontrol then in tab1 i gave ref field sub1 and tab2 i gave ref field sub2 and fatch code ic1 and ic2.
and then i created screen 221 and 222.
inside 200 flow logic i wrote below code but still its giving me same error.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0221'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0222'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
i dont know is it required to make any normal screen .
please try to give me ans as soon as possible.

Content Engine Module is logging DHCP errors

Content Engine Module in Cisco 3725 is logging the following eror continously:
Sep 29 16:47:50 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
Sep 29 16:47:54 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Sep 29 16:47:58 ContentEngine smartd: %CE-SMARTD-3-435000: No Errors Logged
Sep 29 16:48:05 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 1
Sep 29 16:48:06 ContentEngine dhclient: %CE-DHCP-5-191000: No DHCPOFFERS received.
Sep 29 16:48:06 ContentEngine dhclient: %CE-DHCP-5-191000: No working leases in persistent database - sleeping.
Sep 29 16:48:06 ContentEngine %CE-DHCP-5-191000: Script called with reason: FAIL
Sep 29 16:52:58 ContentEngine smartd: %CE-SMARTD-3-435000: No Errors Logged
Disable the external interface (shutdown) didn't fix the problem:
Sep 29 17:02:05 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Sep 29 17:02:05 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:08 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Sep 29 17:02:08 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:11 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Sep 29 17:02:11 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:16 ContentEngine dhclient: %CE-DHCP-5-191000: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Sep 29 17:02:16 ContentEngine dhclient: %CE-DHCP-3-191000: send_packet: Network is down
Sep 29 17:02:21 ContentEngine dhclient: %CE-DHCP-5-191000: No DHCPOFFERS received.
Sep 29 17:02:21 ContentEngine dhclient: %CE-DHCP-5-191000: No working leases in persistent database - sleeping.
Sep 29 17:02:21 ContentEngine %CE-DHCP-5-191000: Script called with reason: FAIL
Sep 29 17:02:58 ContentEngine smartd: %CE-SMARTD-3-435000: No Errors Logged
Any ideas how to fix this problem ?

Try the global command:
ce(config)# no auto-register enable
http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns53/53cref/6812ref.htm#wp1038726

HI function module to pop up error message

hi
can you tell me a functional module that can be used to generate a pop up of error message .
regards
avik.

Hi,
Popup Related Function Modules:
POPUP_TO_DISPLAY_TEXT u2013 display 2 line text.
POPUP_TO_CONFIRM_WITH_VALUE (with Back and Exit)
POPUP_TO_CONFIRM_LOSS_OF_DATA (with Cancel).
POPUP_TO_CONFIRM_WITH_MESSAGE
POPUP_TO_DECIDE_WITH_MESSAGE
Hope this helps.
Regards,
Deepthi.

EAX module: DLLML.exe -Application Error in Windows XP shut down proce

This issue has been covered extensi'vely in this forum and I?m currently waiting to Creative Labs technical to give me ?some instructions on this issue but in the meantime I found this article about this issue which said this:
?
?Remote Control System DLL Module Loader. Task installed by the drivers for Creative Audigy Pro 4 and X?Fi range of sound cards. This startup task enables support for the Remote Control which comes with those sound cards.
?
Recommendation :
Dear, Oh Dear, Oh Dear !
?
Those of you who have followed our Task List pages since 2000, or those of you who have bought? The Ultimate Troubleshooter, will recall how once we came across a great quote on the web about the Creative Development Team ? here goes :Rumours that Creative?s driver team is composed entirely .... have not been confirmed !?.
?
Well, the rumours refuse to die away. Creative Labs unparalleledcreativity? and ability to produce either useless (in our opinion) or downright destabilizing background tasks down the years, continues unabated. DLLML.EXE is the latest incarnation. We?re in 2006, eight years on from Windows 98 and, still, we continue to get these occasional nightmares from Creative !
This task?s achievements :? 90% to 00% CPU utilization on some PCs, freezes, extreme slow-downs, incompatibilities with other devices, high memory usage, sound problems on X-Fi cards (!!!), shutdown or boot?up errors, inability to shut down, and the list simply goes on. Even the odd Creative tech will suggestKill that task!
when you call in desperation.
?
If you are lucky enough not to experience any of the above problems (some versions of the drivers are actually problem free ? also, the problems do not occur on all PCs), then do nothing.
?
If, on the other hand, you are one of the unlucky ones, then disable this task as follows :
?
a)? Disable it on the Startups? tab of TUT.
?
b)? Click the big green? APPLY? button to may your changes stick.
?
c)? Reboot your PC and check if the task stops coming up. If it does, then all is fine, otherwise make the disabling process more comprehensi've by first right?clicking on this task on the Tasks? tab of TUT and terminating it.
?
d)? Next, switch to the Startups? tab, right?click on this task and choose? Rename the file that this Startup points to. All you will be missing is the ability to use the Remote Control. 
?
I honestly remove some of the comments about Creative Labs technical team due to fears that I would get banned from this forum before I even posted one thread ? laughed out loud.
If anybody from Creative Labs or any other knowledgeable persons are reading this particular post can you confirm whether these steps mentioned above a), b) or c) are the right things to do in the case of this issue?
Thanking you in advance Optical0

IIRC the problem was there were two of the same files and it was trying to read both causing an error.
Renaming worked in solving the problem. Forgive but it's been awhile since I fixed it. From what I remember renaming fixed the problem though.
Hope that hel
ps.

[Solved] No module named parse- python errors as own user

A number of applications on my system (wicd and turpial, among others) return python errors when I run them as my own user. I can run these applications as root with no errors, so I'm not missing any packages. The most common of these errors, appearing when I run applications like turpial and hotot looks like this:
➤ turpial
Traceback (most recent call last):
File "/usr/bin/turpial", line 5, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python3.3/site-packages/pkg_resources.py", line 17, in <module>
from urllib.parse import urlparse, urlunparse
ImportError: No module named parse
When I run wicd-curses:
➤ wicd-curses
Traceback (most recent call last):
File "/usr/share/wicd/curses/wicd-curses.py", line 44, in <module>
from dbus import DBusException
File "/usr/lib/python3.3/site-packages/dbus/__init__.py", line 82, in <module>
import dbus.types as types
File "/usr/lib/python3.3/site-packages/dbus/types.py", line 6, in <module>
from _dbus_bindings import (
ImportError: /usr/lib/python3.3/site-packages/_dbus_bindings.so: undefined symbol: PyBytes_Type
Again, both applications mentioned here work fine when run as root. It should also be noted that I only installed turpial after already witnessing this error with hotot-gtk3-git. Has anyone seen this before, or have any idea how to start troubleshooting it?
Thanks.
EDIT: It was a Pythonpath issue.
Last edited by apurplermixture (2013-04-24 00:55:28)

Thank you! That worked

Failed load Kernel Modules | fglrx exec Format Error

Hello
after I started my computer this morning it won't load fglrx anymore.
Yesterday everything worked just fine. But I can still start the xserver without any problem.
systemctl status systemd-modules-load.serivce outputs:
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Tue 2013-08-20 10:59:28 CEST; 20min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 113 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
Aug 20 10:59:28 orz-aa-0 systemd-modules-load[113]: Failed to insert 'fglrx': Exec format error
Aug 20 10:59:28 orz-aa-0 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Aug 20 10:59:28 orz-aa-0 systemd[1]: Failed to start Load Kernel Modules.
Aug 20 10:59:28 orz-aa-0 systemd[1]: Unit systemd-modules-load.service entered failed state.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
and modprobe fglrx outputs:
modprobe: ERROR: could not insert 'fglrx': Exec format error
Installed are:
catalyst 13.8-1
catalyst-utils 13.8-1
lib32-catalyst-utils 13.8-1
xorg-bdftopcf 1.0.4-1
xorg-font-util 1.3.0-1
xorg-font-utils 7.6-3
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-3
xorg-fonts-misc 1.0.1-2
xorg-luit 1.1.1-1
xorg-mkfontdir 1.0.7-1
xorg-mkfontscale 1.1.1-1
xorg-server 1.14.2-2
xorg-server-common 1.14.2-2
xorg-setxkbmap 1.3.0-1
xorg-twm 1.0.7-1
xorg-xauth 1.0.7-1
xorg-xclock 1.0.6-1
xorg-xhost 1.0.6-1
xorg-xinit 1.3.2-3
xorg-xkbcomp 1.2.4-1
xorg-xmodmap 1.0.7-1
xorg-xrdb 1.0.9-2
xorg-xset 1.2.2-2
I'm really a newbie to arch linux and would appreciate any help.
Thanks in advance.
surrz
Last edited by surrz (2013-08-20 10:53:28)

I grepped /var/log/Xorg.0.log as suggested by the wiki, here's the results:
sudo grep '(EE)' /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.890] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[fiendfan1@arch ~]$ grep '(WW)' /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.150] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.150] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 19.150] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.150] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.586] (WW) Falling back to old probe method for fglrx
[ 19.710] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 19.812] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 19.889] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 19.890] (WW) fglrx(0): ***********************************************************
[ 19.890] (WW) fglrx(0): * DRI initialization failed *
[ 19.890] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 19.890] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 19.890] (WW) fglrx(0): ***********************************************************
[ 19.908] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 20.014] (WW) fglrx(0): Option "VendorName" is not used
[ 20.014] (WW) fglrx(0): Option "ModelName" is not used
[ 20.425] (WW) evdev: USB USB Keykoard: ignoring absolute axes.
I don't know what any of this means, anyone have any ideas?

Module PI 7.11 error

Similar Messages

Maybe you are looking for