Module pool program - urgent
Hi Friends..
I am working on a module pool program where I am using Z_BAPI_ADDREMPAU_CREATE and Z_BAPI_ADDREMPAU_CHANGE inside my Zmodule program. I have copied this these BAPIs from Standard BAPI. The reason I created this ZBAPIs because I have created a new fields on the screen in which when I press SAVE button ..these extra fields should also saved.
I am facing a different problem when I am debugging each line ..it is saving into database table( pa0006). But when I press SAVE ..it is going into short dump. I could not understand why this problem is coming. Either it is giving this dump problem or the BAPI is returning a complex application error has occurred
The DUMP is :- Incorrect internal format of ABAP Program SAPLHRMM
Correct the error:- Try regenerating the program SAPLHRMM
Please help.
Hi Ravi,
This is the code in my ZFm.
I am calling bapi_addrempua_change in my ZFM first and then moving extra fields to p0006.
please have a look.
'BAPI_ADDREMPAU_CHANGE'
EXPORTING
EMPLOYEENUMBER = EMPLOYEENUMBER
SUBTYPE = SUBTYPE
OBJECTID = OBJECTID
LOCKINDICATOR = LOCKINDICATOR
VALIDITYBEGIN = VALIDITYBEGIN
VALIDITYEND = VALIDITYEND
RECORDNUMBER = RECORDNUMBER
CONAME = CONAME
STREETANDHOUSENO = STREETANDHOUSENO
CITY = CITY
SCNDADDRESSLINE = SCNDADDRESSLINE
HOUSENUMBER = HOUSENUMBER
APARTMENTID = APARTMENTID
POSTALCODECITY = POSTALCODECITY
DISTRICT = DISTRICT
STATE = STATE
COUNTRY = COUNTRY
TELEPHONENUMBER = TELEPHONENUMBER
DISTANCEINKM = DISTANCEINKM
DISTANCEINKM1 = DISTANCEINKM1
COMPANYOWNEDAPT = COMPANYOWNEDAPT
BUSROUTE = BUSROUTE
NOCOMMIT =
IMPORTING
RETURN = RETURN.
Telephone Number
P0006-ZZCN_CODE_TEL = TELEPHONECOUNTRYCODE.
P0006-ZZAREA_CODE_TEL = TELEPHONEAREACODE.
Mobile Number
P0006-ZZCN_CODE_MOB = MOBILECODE.
P0006-ZZAREA_CODE_MOB = MOBAREACODE.
P0006-ZZMOB_NO = MOBILE.
Fax Number
P0006-ZZCN_CODE_FAX = FAXCODE.
P0006-ZZAREA_CODE_FAX = FAXAREACODE.
P0006-ZZFAXNR = FAX.
Email Address
P0006-ZZSMTP_ADDR = EMAILADDRESS.
Location.
P0006-ZZPLOC = LOCATION.
Location description
P0006-ZZPLOCDESC = LOCATIONDESC.
Similar Messages
-
Cursor position on screen data in module pool programming(urgent)
Hi all,
I developed a module pool program which will save the data after scanning the barcode data.
In my program screen 100 is there which contains field 2dbar. scanned data is comming to 2dbar field.
we r doing scan 4 times.once for vendor number,once for material no. like this.
After 1st scan, vendor number will come to field 2dbar.
Then I developed logic to put comma after each scanned data come to this field 2dbar.
MODULE put_comma INPUT.
CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
*replace 2dbar with 2dbar2 into 2dbar.
move 2dbar2 to 2dbar.
*write 2dbar2 to 2dbar.
condense 2dbar no-gaps.
*move '' to 2dbar.
*set cursor field 2dbar offset 5.
*write
ENDCASE.
ENDMODULE. " put_comma INPUT
By above logic, comma comes to the starting position of 2dbar after each scan. i.e cursor position is coming to the starting position of screen field 2dbar.
Now I need to move the cursor position after the comma position on 2dbar after each scan.
after 1st scan, 2dbar contains
vmotorola
then my logic puts a comma when u put enter on screen 100.
now 2dbar contains
vmotorola,
i should get the cursor position after the comma.but i am getting cursor position before 'v'.so how to move this cursor position beyond comma after each scan.
I added set cursor command but it is not working.plz
What is the logic, I need to put in PAI to move the cursor on selection screen.
Already the logic I have mentioned. with that logic, I can put comma.now I need to add cursor movement logic to move the cursoron on screen field 2dbar.
Plz reply me as it is urgent.
Thanks in advance.
Regards
pabitraCASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
move 2dbar2 to 2dbar.
condense 2dbar no-gaps.
len = strlen ( 2dbar ).
len = len - 1.
set cursor field 2dbar offset len.
ENDCASE.
ENDMODULE. " put_comma INPUT -
Module Pool Programming - URGENT!!!
Hi Friends,
I have a screen with 3 radiobuttons and when I call a next screen and come bacl to the main screen, the radio button is not placed properly.
Eg. I have 3 radiobuttons: 1. All ITEMS (default X)
2. Open I TEMS
3. Closed ITEMS
If I clicked Open Items readio button and go to the details screen, if I click to back button and call the screen, then the radio button is placed on all items.
If there anyway that I can see the radiobutton in the same position as I had clicked?
Please tell me its urgent..........Hi,
This is bcz u have given default value as <b>clicked</b> for <b>All Items</b> radio button. So when u call next screen and come back to the main screen the default value is retained.
Regards,
sowmya -
How to create a module pool program
Dear Guru
I want to know know how to create a module pool program from se80 step by step. I want to know the steps where i will get the four includes like form routines, PAI, PBO, and global data please its very urgent.
Thanks & regards
Saifur Rahamanhi Saifur Rahaman,
goto se80 then click find program,
next u want any name of the program enter as,
Attribute type as find Module pool click it.
next u want any package and save and activate.
program name with create screen with any number then
click layout and u want any object and save , actived.
click flow logic , four types as PBO and PAI and POV, POH.
PBO---> Trigger is before screen.
its applied for display screen and inactive or no display screen only
PAI--->Trigger is after screen
when u want button then its processed.
POV--> Value requested for F4.
POH-->Help requested for F1.
Reward if useful,
S.Suresh. -
Total screen shots for module pool programming
Hi Abapers,
Any one could send me the screen shots for the module pool programming with multiple screens.
Thanks in advance.
Regards
YubiYou can check the transaction ABAPDOCU for sample programs..
Check the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Also chk this thread.
Urgent: : Requiremnt on module pool -
How to extract the data from module pool program to Excel Sheet?
Hi Guys
I am having a requirement to transfer the data from Module pool screen to excel sheet directly.
This is an urgent requirement.
So plz reply me with some coding examples.
I will give points for that.This report extract excel file. From that concept you can easily extract data from module pool program also by coding in PAI of the screen.
REPORT ztest1 .
* this report demonstrates how to send some ABAP data to an
* EXCEL sheet using OLE automation.
include ole2incl.
* handles for OLE objects
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
h_c type ole2_object. " color
DATA: FILENAME LIKE RLGRAP-FILENAME.
tables: spfli.
data h type i.
* table of flights
data: it_spfli like spfli occurs 10 with header line.
*& Event START-OF-SELECTION
start-of-selection.
* read flights
select * from spfli into table it_spfli.
* display header
uline (61).
write: / sy-vline no-gap,
(3) 'Flg'(001) color col_heading no-gap, sy-vline no-gap,
(4) 'Nr'(002) color col_heading no-gap, sy-vline no-gap,
(20) 'Von'(003) color col_heading no-gap, sy-vline no-gap,
(20) 'Nach'(004) color col_heading no-gap, sy-vline no-gap,
(8) 'Zeit'(005) color col_heading no-gap, sy-vline no-gap.
uline /(61).
* display flights
loop at it_spfli.
write: / sy-vline no-gap,
it_spfli-carrid color col_key no-gap, sy-vline no-gap,
it_spfli-connid color col_normal no-gap, sy-vline no-gap,
it_spfli-cityfrom color col_normal no-gap, sy-vline no-gap,
it_spfli-cityto color col_normal no-gap, sy-vline no-gap,
it_spfli-deptime color col_normal no-gap, sy-vline no-gap.
endloop.
uline /(61).
* tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
* PERCENTAGE = 0
text = text-007
exceptions
others = 1.
* start Excel
create object h_excel 'EXCEL.APPLICATION'.
* PERFORM ERR_HDL.
set property of h_excel 'Visible' = 1.
* CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:kis_excel.xls'
* PERFORM ERR_HDL.
* tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
* PERCENTAGE = 0
text = text-008
exceptions
others = 1.
* get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
perform err_hdl.
* add a new workbook
call method of h_mapl 'Add' = h_map.
perform err_hdl.
* tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
* PERCENTAGE = 0
text = text-009
exceptions
others = 1.
* output column headings to active Excel sheet
perform fill_cell using 1 1 1 200 'Carrier id'(001).
perform fill_cell using 1 2 1 200 'Connection id'(002).
perform fill_cell using 1 3 1 200 'City from'(003).
perform fill_cell using 1 4 1 200 'City to'(004).
perform fill_cell using 1 5 1 200 'Dep. Time'(005).
loop at it_spfli.
* copy flights to active EXCEL sheet
h = sy-tabix + 1.
if it_spfli-carrid cs 'AA'.
perform fill_cell using h 1 0 000255000 it_spfli-carrid.
elseif it_spfli-carrid cs 'AZ'.
perform fill_cell using h 1 0 168000000 it_spfli-carrid.
elseif it_spfli-carrid cs 'JL'.
perform fill_cell using h 1 0 168168000 it_spfli-carrid.
elseif it_spfli-carrid cs 'LH'.
perform fill_cell using h 1 0 111111111 it_spfli-carrid.
elseif it_spfli-carrid cs 'SQ'.
perform fill_cell using h 1 0 100100100 it_spfli-carrid.
else.
perform fill_cell using h 1 0 000145000 it_spfli-carrid.
endif.
if it_spfli-connid lt 400.
perform fill_cell using h 2 0 255000255 it_spfli-connid.
elseif it_spfli-connid lt 800.
perform fill_cell using h 2 0 077099088 it_spfli-connid.
else.
perform fill_cell using h 2 0 246156138 it_spfli-connid.
endif.
if it_spfli-cityfrom cp 'S*'.
perform fill_cell using h 3 0 155155155 it_spfli-cityfrom.
elseif it_spfli-cityfrom cp 'N*'.
perform fill_cell using h 3 0 189111222 it_spfli-cityfrom.
else.
perform fill_cell using h 3 0 111230222 it_spfli-cityfrom.
endif.
if it_spfli-cityto cp 'S*'.
perform fill_cell using h 4 0 200200200 it_spfli-cityto.
elseif it_spfli-cityto cp 'N*'.
perform fill_cell using h 4 0 000111222 it_spfli-cityto.
else.
perform fill_cell using h 4 0 130230230 it_spfli-cityto.
endif.
if it_spfli-deptime lt '020000'.
perform fill_cell using h 5 0 145145145 it_spfli-deptime.
elseif it_spfli-deptime lt '120000' .
perform fill_cell using h 5 0 015215205 it_spfli-deptime.
elseif it_spfli-deptime lt '180000' .
perform fill_cell using h 5 0 000215205 it_spfli-deptime.
else.
perform fill_cell using h 5 0 115115105 it_spfli-deptime.
endif.
endloop.
* EXCEL FILENAME
CONCATENATE SY-REPID '_' SY-DATUM+6(2) '_' SY-DATUM+4(2) '_'
SY-DATUM(4) '_' SY-UZEIT '.XLS' INTO FILENAME.
CALL METHOD OF H_MAP 'SAVEAS' EXPORTING #1 = FILENAME.
free object h_excel.
perform err_hdl.
* FORM FILL_CELL *
* sets cell at coordinates i,j to value val boldtype bold *
form fill_cell using i j bold col val.
call method of h_excel 'Cells' = h_zl
exporting
#1 = i
#2 = j.
perform err_hdl.
set property of h_zl 'Value' = val .
perform err_hdl.
get property of h_zl 'Font' = h_f.
perform err_hdl.
set property of h_f 'Bold' = bold .
perform err_hdl.
set property of h_f 'Color' = col.
perform err_hdl.
endform. "FILL_CELL
*& Form ERR_HDL
* outputs OLE error if any *
* --> p1 text
* <-- p2 text
form err_hdl.
if sy-subrc <> 0.
write: / 'OLE-Automation Error:'(010), sy-subrc.
stop.
endif.
endform. " ERR_HDL -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
Can we use Initilization event in module pool program?
Hi All,
Can we use Initialization event in module pool program? If not why?
Thanks In Advance!!!!!!!!!The runtime environment creates the INITIALIZATION event and calls the corresponding event block (if it has been defined in the ABAP program).
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb2d67358411d1829f0000e829fbfe/content.htm
SEE THE ABOVE LINK...THINK IT WILL SOLVE ALL YOUR DOUBTS
REGARDS
RACHEL -
Use of "Pool Table(s)" in Module Pool Program
Hi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PMHi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PM -
How to call a "Z"module pool program in a "z"report
Hi Guys,
I have two reports .
1. Report : uploads a tab delimited " .Txt1" file and update the "z1" table
".TXT1" : File contains 4 fields
2. Module pool. :Uploads a a tab delimited " .Txt2" file and update another "z2" table
".TXT2" file contains the 4 fileds of ".TXT1" and also 2 extra fields.
I want to merge (call) the module pool program in the Report and perform the upload function using only one ".TXT" file.Please do guide me precisely .
*Report:*
REPORT zrswbgcs009 NO STANDARD PAGE HEADING MESSAGE-ID zwb
LINE-SIZE 185.
TABLES: zgcs_foc. "FOC Parts Table
*data count buffer
DATA: read_cnt(6) TYPE p, "Find read record
update_cnt(6) TYPE p, "OK record
error_cnt(6) TYPE p. "Error record
*file buffer(FOC)
DATA: BEGIN OF FOC_inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
TEXT(100), "Remark
END OF FOC_inrec.
*file buffer
DATA: BEGIN OF inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
PRICE(15), "Parts Price
WAERK(5), "Parts Currency
TEXT(100), "Remark
END OF inrec.
DATA : v_file LIKE rlgrap-filename.
DATA gt_zgcs_foc LIKE zgcs_foc OCCURS 0 WITH HEADER LINE.
DATA gs_zgcs_foc LIKE zgcs_foc.
*File name ACCEPT--------------------------------------------------
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*Company code
PARAMETERS: p_comp LIKE zgcs_imei-company OBLIGATORY.
PARAMETERS: pcfile LIKE rlgrap-filename OBLIGATORY LOWER CASE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS: HQfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 7(20) text-101 FOR FIELD HQfile.
SELECTION-SCREEN POSITION 31.
PARAMETERS: SUBfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 37(20) text-102 FOR FIELD SUBfile.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK box WITH FRAME.
SELECTION-SCREEN: COMMENT /2(40) text-011, COMMENT 42(40) text-001,
ULINE,
COMMENT /2(40) text-012, COMMENT 42(40) text-002,
COMMENT /2(40) text-013, COMMENT 42(40) text-003,
COMMENT /2(40) text-014, COMMENT 42(40) text-004,
COMMENT /2(40) text-015, COMMENT 42(40) text-005,
COMMENT /2(40) text-016, COMMENT 42(40) text-006,
COMMENT /2(40) text-017, COMMENT 42(40) text-007,
COMMENT /2(40) text-018, COMMENT 42(40) text-008,
COMMENT /42(40) text-009.
SELECTION-SCREEN END OF BLOCK box.
* -- AT SELECTION SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = space
def_path = 'C:\'
mask = ',*.txt,*.TXT.'
mode = 'O'
title = ' '
IMPORTING
filename = pcfile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
*-----------------------------start--------------------------------
START-OF-SELECTION.
CLEAR: read_cnt, update_cnt, error_cnt.
REFRESH gt_zgcs_foc. CLEAR gs_zgcs_foc.
PERFORM file_upload_from_pc.
SORT gt_zgcs_foc.
DELETE ADJACENT DUPLICATES FROM gt_zgcs_foc
COMPARING COMPANY CUSTOMER PART_CODE REF_NO REF_DATE.
*// customer code check
DATA: LT_ZESTD LIKE ZESTD OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT COMPANY CUSTOMER CURRENCY
INTO CORRESPONDING FIELDS OF TABLE LT_ZESTD
FROM ZESTD
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE COMPANY = gt_zgcs_foc-COMPANY
AND CUSTOMER = gt_zgcs_foc-CUSTOMER.
ENDIF.
SORT LT_ZESTD BY COMPANY CUSTOMER.
*// part code check
DATA: LT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT *
INTO TABLE LT_MARA
FROM MARA
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE MATNR = gt_zgcs_foc-PART_CODE.
ENDIF.
SORT LT_MARA BY MATNR.
LOOP AT gt_zgcs_foc.
*// customer code check
READ TABLE LT_ZESTD WITH KEY
COMPANY = gt_zgcs_foc-COMPANY
CUSTOMER = gt_zgcs_foc-CUSTOMER.
IF SY-SUBRC <> 0.
WRITE:/'Invalid Customer code ',
gt_zgcs_foc-COMPANY, ' ',
gt_zgcs_foc-CUSTOMER.
STOP.
ENDIF.
*// part code check
READ TABLE LT_MARA WITH KEY MATNR = gt_zgcs_foc-PART_CODE
BINARY SEARCH.
IF SY-SUBRC <> 0.
WRITE:/ 'Invalid part code ', gt_zgcs_foc-PART_CODE.
STOP.
ENDIF.
*// REF_NO
TRANSLATE gt_zgcs_foc-REF_NO TO UPPER CASE.
SHIFT gt_zgcs_foc-REF_NO LEFT DELETING LEADING SPACE.
IF gt_zgcs_foc-REF_NO = SPACE.
WRITE:/'Ref No. is blank'.
STOP.
ENDIF.
*// REF_DATE
IF gt_zgcs_foc-REF_DATE = 0.
WRITE:/'Invalid Ref Date'.
STOP.
ENDIF.
*// QTY
* IF gt_zgcs_foc-QTY CO ' 0123456789'.
* ELSE.
* WRITE:/ gt_zgcs_foc-QTY, ' Invalid Qty value'.
* STOP.
* ENDIF.
ENDLOOP.
* Insert/Update table
* MODIFY zgcs_foc FROM TABLE gt_zgcs_foc.
INSERT zgcs_foc FROM TABLE gt_zgcs_foc.
IF sy-subrc EQ 0.
COMMIT WORK.
DESCRIBE TABLE gt_zgcs_foc LINES update_cnt.
error_cnt = read_cnt - update_cnt.
ELSE.
ROLLBACK WORK.
error_cnt = read_cnt - update_cnt.
ENDIF.
ULINE.
FORMAT COLOR 3.
WRITE: / 'Read count :', read_cnt.
WRITE: / 'Insert/Update count :', update_cnt.
WRITE: / 'Error count :', error_cnt.
FORMAT COLOR OFF.
*end-of-selection--------------------------------------------------
END-OF-SELECTION.
*& Form FILE_UPLOAD_FROM_PC
FORM file_upload_from_pc.
IF pcfile IS INITIAL.
WRITE: / 'SELECT UPLOAD FILE !'.
ELSE.
MOVE pcfile TO v_file.
* HQ file upload
IF HQfile EQ 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = FOC_inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT FOC_inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-customer
importing
output = FOC_inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING FOC_inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '1' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
* SGE file upload
ELSE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = inrec-customer
importing
output = inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '2' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM.
*MODULE POOL::*
*& Module Name : Warranty Bill
*& Sub-Module : W/B
*& Description : Parts Q'ty Adjust(Sales & Warranty)
*& Program Name : ZRSWBP004
*& History
*& Date Author Reason
*& 2007.05.08 Song, Ji-Hyun Initial Coding Req.by WH.Song
*& Logic Process
* - CONDITIONS
* Company, Customer, Material
* - PROCESS
* Display,Insert,Update data in the T/B ZESP04
REPORT zrswbp004 NO STANDARD PAGE HEADING
MESSAGE-ID 00
LINE-SIZE 250
LINE-COUNT 50.
* G L O B A L V A R I A B L E S *
TABLES : zesp04.
DATA : BEGIN OF itab_list OCCURS 0,
company LIKE zesp04-company,
customer LIKE zesp04-customer,
material LIKE zesp04-material,
adj_date LIKE zesp04-adj_date,
adjust LIKE zesp04-adjust,
reason LIKE zesp04-reason,
reason_code LIKE zesp04-reason_code,
doc_no LIKE zesp04-doc_no,
in_date LIKE zesp04-in_date,
create_id LIKE zesp04-create_id,
END OF itab_list.
DATA : itab_upload LIKE TABLE OF zesp04 WITH HEADER LINE.
DATA : s_mode(10).
DATA : table_name(10) VALUE 'ZESP04'.
DATA : tot_cnt TYPE i.
DATA : ref_flag(1).
* M A C R O D E F I N E *
DEFINE conversion_kunnr.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
DEFINE conversion_material.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
* S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE title1.
PARAMETERS : company LIKE zesp04-company MEMORY ID buk MODIF ID v1
OBLIGATORY.
SELECT-OPTIONS : customer FOR zesp04-customer MEMORY ID kun
MODIF ID v1.
SELECT-OPTIONS : material FOR zesp04-material MEMORY ID mat
MODIF ID v1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT 3(12) text-002 MODIF ID v2.
PARAMETERS : up_flag AS CHECKBOX MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(12) text-001 MODIF ID v2.
PARAMETERS : p_fname(300) LOWER CASE MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE title2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(53) text-003 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-004 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-005 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-006 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(15) text-007 MODIF ID v2.
PARAMETERS : df1 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 24(13) text-012 MODIF ID v2.
PARAMETERS : df2 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 41(11) text-013 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-008 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(11) text-009 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-010 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-011 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
INCLUDE zrswbp004_pbo.
INCLUDE zrswbp004_pai.
INITIALIZATION.
title1 = ' Parts Quantity Adjustment '.
title2 = ' Text File Layout '.
* S T A R T O F S E L E C T I O N *
TOP-OF-PAGE.
PERFORM write_header.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM write_header.
START-OF-SELECTION.
IF up_flag = 'X'.
PERFORM upload_data.
ELSE.
PERFORM select_data.
SET PF-STATUS 'PF01' EXCLUDING 'SAVE'.
PERFORM display_data.
ENDIF.
AT USER-COMMAND.
PERFORM user_command.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM get_filename.
*& Form SELECT_DATA
* Select Data for Display
FORM select_data.
SELECT * FROM (table_name)
INTO CORRESPONDING FIELDS OF TABLE itab_list
WHERE company = company
AND customer IN customer
AND material IN material.
CHECK sy-subrc <> 0.
WRITE: 'No data found with your option.'.
ENDFORM. " SELECT_DATA
*& Form DISPLAY_DATA
* Display Data following Condition
FORM display_data.
LOOP AT itab_list.
FORMAT COLOR 2 INTENSIFIED.
WRITE : / '|' NO-GAP.
WRITE : (07) itab_list-company CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-customer CENTERED NO-GAP, '|' NO-GAP,
(20) itab_list-material CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-adj_date CENTERED NO-GAP, '|' NO-GAP,
(15) itab_list-adjust RIGHT-JUSTIFIED NO-GAP, '|'
NO-GAP,
(55) itab_list-reason LEFT-JUSTIFIED NO-GAP, '|' NO-GAP,
(11) itab_list-reason_code CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-doc_no CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-in_date CENTERED NO-GAP, '|' NO-GAP,
(12) itab_list-create_id CENTERED NO-GAP, '|' NO-GAP.
FORMAT INTENSIFIED OFF.
HIDE itab_list.
ENDLOOP.
WRITE : / sy-uline(171).
ENDFORM. " DISPLAY_DATA
*& Form WRITE_HEADER
* Write Report Header
FORM write_header.
DATA : line(1024).
CLEAR line WITH '-'.
DESCRIBE TABLE itab_list LINES tot_cnt.
FORMAT INTENSIFIED ON.
WRITE : 15 'Parts Quantity Adjustment'.
SKIP.
WRITE : / 'Total Count : ', tot_cnt.
WRITE : /.
WRITE : (171) sy-uline.
WRITE : / '|' NO-GAP.
WRITE : (07) 'Company' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Customer' CENTERED NO-GAP, '|' NO-GAP,
(20) 'Material' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Adj. Date' CENTERED NO-GAP, '|' NO-GAP,
(15) 'Adjust' CENTERED NO-GAP, '|' NO-GAP,
(55) 'Reason' CENTERED NO-GAP, '|' NO-GAP,
(11) 'Reason Code' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Doc No' CENTERED NO-GAP, '|' NO-GAP,
(10) 'IN DATE' CENTERED NO-GAP, '|' NO-GAP,
(12) 'CREATE ID' CENTERED NO-GAP, '|' NO-GAP.
WRITE : /(171) sy-uline.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_HEADER
*& Form UPLOAD_DATA
* Data Upload from File
FORM upload_data.
DATA : l_filename LIKE rlgrap-filename,
temp_dateformat TYPE dateformat.
IF df1 = 'X'.
temp_dateformat = 'YYYY.MM.DD'.
ELSE.
temp_dateformat = 'DD.MM.YYYY'.
ENDIF.
MOVE p_fname TO l_filename.
CHECK l_filename NE space.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = l_filename
filetype = 'DAT'
dat_d_format = temp_dateformat
TABLES
data_tab = itab_list
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9.
IF sy-subrc NE 0.
MESSAGE s000 WITH 'File upload is failed!'.
STOP.
ELSE.
CLEAR : itab_upload, itab_upload[].
LOOP AT itab_list.
MOVE-CORRESPONDING itab_list TO itab_upload.
conversion_kunnr itab_upload-customer.
conversion_material itab_upload-material.
itab_upload-mandt = sy-mandt.
itab_upload-in_date = sy-datum.
itab_upload-create_id = sy-uname.
*>>>>Insert by GSCHOI 2007.11.08
IF itab_list-adj_date+0(6) NE sy-datum+0(6).
MESSAGE i368 WITH 'Adjust month must same as current month!'.
ROLLBACK WORK.
STOP.
ENDIF.
*<<<<End
APPEND itab_upload.
INSERT INTO (table_name) VALUES itab_upload.
IF sy-subrc EQ 0.
CONTINUE.
ELSEIF sy-subrc EQ 4.
MESSAGE s368 WITH 'Duplicated Data Error!'.
ROLLBACK WORK.
STOP.
ELSE.
MESSAGE s368 WITH 'File Error!'.
ROLLBACK WORK.
STOP.
ENDIF.
ENDLOOP.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE s368 WITH 'Uploaded Successfully!'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form USER_COMMAND
* User Command Execution in Screen 1000
FORM user_command.
MOVE-CORRESPONDING itab_list TO zesp04.
CASE sy-ucomm.
WHEN 'INSERT'.
PERFORM insert_item.
WHEN 'UPDATE'.
PERFORM update_item.
WHEN 'DISPLAY'.
PERFORM display_item.
WHEN 'REFRESH'.
PERFORM refresh_list.
ENDCASE.
IF ref_flag = 'Y'.
PERFORM refresh_list.
CLEAR ref_flag.
ENDIF.
ENDFORM. " USER_COMMAND
*& Form INSERT_ITEM
* When Clicking Insert Button
FORM insert_item.
CLEAR : s_mode.
CLEAR : zesp04.
s_mode = 'INSERT'.
CALL SCREEN '100'.
ENDFORM. " INSERT_ITEM
*& Form UPDATE_ITEM
* When Clicking Update Button
FORM update_item.
CLEAR : s_mode.
s_mode = 'UPDATE'.
CALL SCREEN '100'.
ENDFORM. " UPDATE_ITEM
*& Form DISPLAY_ITEM
* When Clicking Display Button
FORM display_item.
CLEAR : s_mode.
s_mode = 'DISPLAY'.
CALL SCREEN '100'.
ENDFORM. " DISPLAY_ITEM
*& Form REFRESH_LIST
* When Clicking Refresh Button or Returning Display Screen
FORM refresh_list.
CLEAR : itab_list, itab_list[].
PERFORM select_data.
sy-lsind = sy-lsind - 1.
PERFORM display_data.
ENDFORM. " REFRESH_LIST
*& Form GET_FILENAME
* Get Filename
FORM get_filename.
DATA: l_fname LIKE ibipparms-path .
DATA : p_name LIKE sy-repid.
p_name = sy-repid.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = p_name
dynpro_number = sy-dynnr
field_name = ''
IMPORTING
file_name = l_fname.
p_fname = l_fname.
ENDFORM. " GET_FILENAME
Edited by: Matt on Nov 24, 2008 11:24 AM - surrounded the ABAP with tagsHi,
Use SUBMIT statement in your first Report zrswbgcs009 at the end, to call the Modulepool program zrswbp004.
do a search in SDN you will get lot of threads on SUBMIT statement with selection screen.
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dba51a35c111d1829f0000e829fbfe/content.htm
Regards
Bala Krishna -
Calling a report from module pool program
Hi all,
I had a requirement where I need to call a report from the module pool program where in when we click REPORT button, it should display the report output in the another screen.
Can we do by calling screen after pushing REPORT button. If so, where we should write that code ( In pbo or pai). Please give me an idea.
Thanking you,
Regards,
Murali Krishna TUse submit syntax.
Press F1 on submit, Donot use return statement with it.
If so, where we should write that code ( In pbo or pai).
Please understand about these two events before doing the requirement. -
How to make a fld mandatory in module pool program?
I need help on following 2 things
I have module pool program created, in that many screen subscreens created.
1.I want to make a field mandatory
second one is, I have a general tab and data tab.
General tab screen - 2101
Data tab = 2102
In general tab, I have edited the values (change mode), when change the values and try to save it,
It is holding old value.but If i exucute the transaction once again, it is showing the changed value(new value)
For ex: there is a date field value is 03/08/2009
If I change this to 03/09/2009 and press on Save button from the standard menu, still it is showing the value 03/08/2009. but I execute this transaction once again it is showing the value as 03/09/2009
I will be thankful if someone helps me hereHi Chitra,
Go to the properties of the filed select program tab and say input required.
then you will get the problem solved.
For second one actually its saving but not displaying the saved value at the same time ,
for this you write the select statement after saving , so that once save is execute m, select statement also will execute and it will display the newly saved value.
so after saving imdeatly u write the select statement.
like case sy-ucomm.
when 'SAVE'.
insert ztable.
select filed from z table.
endcase.
let me know if ur problem solved.
Regards
Rajendra -
How to use one module pool program in another module pool programming?
Hi
I have one moodule pool program.
In one of my screen i want to use some code which already developed in another module pool program.
Is there any direct way for using one module pool programcode in another module pool program.
If there any approaches for this plz help me in this issue.Dear,
If you want to use the code.
first you can write your code in a subroutine in module pool program 1
and then you can use it from module pool program 2 by
perform subroutine_name(program_name)
using P_1
changing C_1
if you wan to use one module pool data into other module pool.
so that is another requirement. -
How to create Long Text in Module Pool Program
Hi all,
I want to develop a new module pool program and I want to use Long text screen in this program and also want this text will store in table.I never develop such type of module pool before.This long text will like sales order long text.Please let me know the steps how I can develop such type of program and how I save long text huge data in table.
Thanks & Regards
NirmalHai ,
here you have to use custom control, for this
DATA: line(256) TYPE c,
text_tab LIKE STANDARD TABLE OF line,
field LIKE line.
1) Create custom control in your screen
2) CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT', "--> (this is custom control name in screen)
editor EXPORTING parent = container.
3) CALL METHOD editor->get_text_as_stream "This method reads data from custom control , inserts into itab 'text_tab'
IMPORTING
text = text_tab. "
READ TABLE text_tab INTO line INDEX 1. read the text into wa 'line'
if you want more clarity , see 'ABAPDOCU' >ABAP USER DIALOGS> COMPLEXSCREEN ELEMENTS--> DEMO CUSTOM_CONTROL
Maybe you are looking for
-
How can I copy and paste an event in calendar?
In the ios5 version of calendar you can cut and paste an event by simply dragging it from one day to another in month view. However I can see no way of copy and pasting a recurring (but irregular) event. As someone who works irregular shifts I would
-
"Removing email account from iPhoto" How do I remove an email account from iPhoto on an iMac? I set it up with the incorrect password and can no longer send photos, please help!
-
Java error in Oracle Help Demo
Hi, I'm trying to get the Oracle help demo to work on a weblogic server (version 10.2.3) but I get a Java error when when I attempt to navigate to the test page at http://server:port/ohw-rcf-demo I've checked the dependencies for the thin demo and th
-
Signature icon in Preview has disappeared
When I upgraded to Mavericks, the Signature icon disappeared from my edit menu in the Preview app. How do I get it back please? Todd
-
Why is my phone in recovery mode and wont update?
My iphone 5 was preparing to update and is now in recovery mode and will not restore, pls help