Module pool screen element not shown
Hi,
I have a module pool with table control.
I have added a new field to the internal table and included it in layout-checked properties and it is active/shown in output and input enabled
Also, when I checked in PBO debugging, loop at screen, when the screen element is this field, active/input/output = 1
I have activated the program/generated it/logged off from system and logged in again (to take care of refreshing the screen)
The internal table has values for this field.
When I execute the screen directly instead of module pool program, field is shown in table control
But when I execute the module pool program, this field and heading are not shown in table control but empty space allocated for this field is shown.
May I know how can I resolve this.
Thanks!
Hi Vasu,
Go through this [Sample|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac5e35c111d1829f0000e829fbfe/content.htm].
Regards,
Maruthi
Similar Messages
-
How to creat select-option on module pool screen???
Hi All,
please tell me how to creat select-option on module pool screen???
Regards
DeepakHi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7 -
Icon display in Module pool screen not visible to some users
Hi,
I have added an icon in one of the module pool screen with dynamic quick info. The page is rendered fine and the info is also displayed well for most users except some. I can't figure out why the icon is not being displayed for some users.
Do someone has any solution for this?
Thanks,
SumithAs I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons. You can look for posting on "how to add an icon" to see a discussion on this topic.
I found some useful info at:
Create and Add Icons to table ICON?
Message was edited by: Charles Folwell -
Module pool / Screen Prog is there any standard SAP functionality ?
Hi I am creating a Module pool / Screen Prog. On this screen I have nearly 100 fileds , now I want to take print out of all the information shown on the screen for the same is there any standard SAP functionality ?
Does SAP provides any standarar ready made functionality for the same. ?No, there is no standard functionality for this. dynpros are not designed to "print out". This is what list displays are for. That said, you will need to write your logic to kick off a list display with all of your field values there, then the user can print.
Regards,
Rich Heilman -
How to handle The Back button on Module Pool screen
Hi Gurus,
I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.hi,
use AT EXIT-COMMAND with the module.
eg. module user_command at exit command.
then there will be no problem. -
How to display image and data in module pool screen?
Hi,
I want to display image and relevant data besides the image in module pool screen, I am using docking container to display the image.
Actually I am able to display image or data any one but not both.
one more thing I want to display multiple images and their data.
Please suggest some one if you have any idea.
Regards,
Dileep.You can try below way, I have used in report.
DATA: gc_docking TYPE REF TO cl_gui_docking_container, "#EC NEEDED "Docking Container
gc_split TYPE REF TO cl_gui_easy_splitter_container, "#EC NEEDED "Splitter
gc_top_container TYPE REF TO cl_gui_container, "#EC NEEDED "Top Container
gc_bottom_container TYPE REF TO cl_gui_container, "#EC NEEDED "Bottom Container
gc_document TYPE REF TO cl_dd_document, "#EC NEEDED "Document
gc_events TYPE REF TO lcl_event_class, "#EC NEEDED " Local Event Class
gc_grid TYPE REF TO cl_gui_alv_grid, "#EC NEEDED " ALV Class
" Creating Docking
CREATE OBJECT gc_docking
EXPORTING
ratio = c_95.
IF sy-subrc EQ 0.
* Splitting the Docking container
CREATE OBJECT gc_split
EXPORTING
parent = gc_docking
sash_position = c_10 "Position of Splitter Bar (in Percent)
with_border = c_1. "With Border = 1 Without Border = 0
ENDIF.
* Placing the containers in the splitter
gc_top_container = gc_split->top_left_container .
gc_bottom_container = gc_split->bottom_right_container .
* Creating Grid
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_bottom_container.
ELSE.
* Background job handling
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_docking.
ENDIF.
* Creating the document
CREATE OBJECT gc_document
EXPORTING
style = 'ALV_GRID'.
Regards,
Sameer -
Assigning 2 fields of same table in Module pool screen
Hi,
I want to assign similar fields of table in module pool screen.
In one case i directly use the tablename-fieldname and in other case when i try doing the same i get error. I know that this is not possible.
Is there any way to get around this. The field i am referring to is attached to a custom domain which is having defined fields. In the second assignment i need to retreive the values of the domain and display it in dropdown mode so that the users are able to select it.
Regards,
ImranThe domain only attached with this field?check the same domain attached to any other field and insert that field in the screen.
shibu
reward if helpful -
How to retain leading zeros in module pool screen
Hi experts,
I have a ztable field of type NUMC4 being displayed on a module pool screen, the value in the field is '0001', but on the screen it displays value as '1' (without leading zeros), When I save the record, Even in the databse it stores as '1'.
But I have checked in debugging the field always contains '0001' in the program execution and I have also used 'CONVERSION_EXIT_ALPHA_INPUT' in the PBO but no use.
Pls suggest.
Thanks,
DeepakCheck the screen attributes for the field. There is an option to show leading zeroes.
edit.
And how did you see it was stored a 1 and not 0001? Using SE16N? Mind you: with SE16N conversion-exits are executed automatically thus showing 0001 as 1.
To make sure: double click on the record in SE16N and look if it's still 1 and not 0001. -
Displaying MIR4 attachment list TIF image in module pool screen
Hi All,
I have a screen with a custom container and I tried to call a TIF image from MIR4 which is in attachment list(which is stored in archived link).
I need a function module to display this image in my Module pool screen using the container.
I tried using below code
* Create controls
CREATE OBJECT container_1
EXPORTING
container_name = 'CONTAINER'.
* create object container_2
* exporting container_name = 'PICTURE_CONTROL_2'.
CREATE OBJECT PICTURE_CONTROL_1
EXPORTING
parent = container_1.
* CREATE OBJECT PICTURE_CONTROL_2 exporting parent = container_2.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL
EXPORTING
* URL = 'SAPR3://984BE16932C81EE3B2AA1E3B0D12C6FF'
* URL = 'file://E:\Personal\New_Passport4.jpg'
* URL = 'SAPR3://984BE16932C81EE3B2BDF8E44B035648.TIF'
*URL = 'SAPR3://SAPR3CMS/get/100/Z1/984BE16932C81EE3B2BDF8E44B035648//.TIF'.
URL = 'SAPR3://WebRepository/0020698212/DEMOWORD97SAPLOGO?Version=00000'
IMPORTING
RESULT = lv_result.
CALL METHOD PICTURE_CONTROL_1->set_display_mode
EXPORTING
display_mode = PICTURE_CONTROL_1->display_mode_fit_center.
But I am able to display this URL = 'SAPR3://WebRepository/0020698212/DEMOWORD97SAPLOGO?Version=00000' and not able to display my archive link image which is in TIF.
note: Display image of Arc.link Doc.type ZBUSI_TIF (doc.class TIF)
Please help me on this.
Thanks
Geetha CharanHi sai,
Please refer th procedure.
For the select-options you might have defined a selection screen.
Next you can fetch the entire data that you wanted to display in a module pool into an internal table.
you can call the screen you defined for o/p upon the selection.
Then, You define a screen XXXX and a table control in the scree, and in the PAI module of the screen
you write a chain end chain processing in which you can display the contents of your internal table.
OR
if you want the selection also to be in the module pool, then for displaying the O/P you can definr a sub-screen of the initial screen and you can call that sub-screen on selcting, which can be done with a function code.
Hope this helps -
Problem in creating a Select-option im a module pool screen
I've been searching how to do a select option in a module pool screen, I've found this neat tutorial http://sample-code-abap.blogspot.com/2008/06/select-option-in-module-pool-screen.html
but I'm having trouble to replicate it...
I've created this conde in my TOP include
SELECTION-SCREEN BEGIN OF SCREEN 201 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 201.
and this is my screen flow code
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE pbo_200.
PROCESS AFTER INPUT.
MODULE pai.
MODULE user_command_0200.
in the screen 200 I have a subscreen area named subs
but when I do this:
MODULE pbo_200 OUTPUT.
CALL subscreen subs including sy-repid '0201'.
ENDMODULE. " pbo_200 OUTPUT
it doesn't "compile"
it gives me this error:
""." or "ID ... FIELD ..." expected after "SUBSCREEN"."
what am I missing? it seems its not recognising the "CALL SUBSCREEN" command...you can't use CALL SUBSCREEN... in any ABAP section. It is reserved to dynpro flow logic. Just add it after PROCESS BEFORE OUTPUT (and also after PROCESS AFTER INPUT).
-
Display Continuous Fluctuations in Input Data in Module Pool Screen
Dear All,
We are working on a Weighbridge Interface scenario, where the weighbridge is sending data to a digitizer, which is connected to the COM port of a PC. The objective is to read the data from the digitizer, and display in a Module pool screen. However, there is one more requirement: the weight may fluctuate until it stabilizes, and the fluctuations have to be displayed on screen. For example, the tare weight of a vehicle may be 12.4 TON, but when the vehicle is standing on the weighbridge, the weight may vary from 10.4 to 12.4 TON. The idea is to capture the stable weight, so that any discrepancies can be avoided. In the current IT system implementation, the fluctuations in the weight are displayed. But using ABAP, can these fluctuations be captured? For example, we may design a screen containing a field for capturing the weight, and the weight displayed there automatically refreshes as soon as there is a change in the digitizer reading. Is this possible to achieve? If so, how?
Awaiting answers.
Thanks and Regards,
SidHi Sid,
just a suggestion for the refreshing of an ABAP screen: you can use class CL_GUI_TIMER, but it only handles whole seconds, i.e. 1 second, 2 seconds and so on, but not 0.5 seconds...
An example of an ABAP listing could be the following:
*& Report ZZAVV001
REPORT zzavv001 NO STANDARD PAGE HEADING.
CONSTANTS: c_yes(1) TYPE c VALUE 'X'.
DATA: BEGIN OF t_bseg OCCURS 0.
INCLUDE STRUCTURE bseg.
DATA: END OF t_bseg.
data: d_num_bkpf type i,
d_num_bseg type i.
PARAMETERS: interval TYPE i DEFAULT 5. "meaning 5 seconds
* CLASS lcl_receiver DEFINITION
CLASS lcl_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_finished FOR EVENT finished OF cl_gui_timer.
ENDCLASS. "lcl_receiver DEFINITION
* Global data
DATA:
test TYPE i,
receiver TYPE REF TO lcl_receiver,
timer TYPE REF TO cl_gui_timer.
START-OF-SELECTION.
CREATE OBJECT timer.
CREATE OBJECT receiver.
SET HANDLER receiver->handle_finished FOR timer.
timer->interval = interval.
CALL METHOD timer->run.
PERFORM load_data. "or whatever you have to do to read the weight
PERFORM show_list. "or whatever you have to do to print the weight you've read
* CLASS lcl_receiver IMPLEMENTATION
CLASS lcl_receiver IMPLEMENTATION.
METHOD handle_finished.
PERFORM carga_datos.
PERFORM muestra_listado.
CALL METHOD timer->run.
ENDMETHOD. "handle_finished
ENDCLASS. "lcl_receiver IMPLEMENTATION
*& Form load_data
* text
FORM load_data.
clear: d_num_bkpf,
d_num_bseg.
select single count( * )
into d_num_bkpf
from bkpf.
select single count( * )
into d_num_bseg
from bseg.
ENDFORM. "load_data
*& Form show_list
* text
FORM show_list.
get time.
skip to line 1.
position 1.
write: / 'Date / Time:', sy-datum, sy-uzeit.
write: / 'Number of BKPF records:', d_num_bkpf.
write: / 'Number of BSEG records:', d_num_bseg.
ENDFORM. " show_list
Okay, it's just a tiny code snippet, but I hope it may help you by designing auto-refreshing screens.
Kind regards,
Alvaro -
Module-pool screen field value under POV event
Hi All,
I have one issue...please suggest me solution for this.
In module-pool program i have one screen(1000) which has one field(hrname_1000).
Under this event:
PROCESS ON VALUE-REQUEST.
FIELD hrname_1000 MODULE hrname_1000.
under this module hename_1000 i have used F4IF_INT_TABLE_VALUE_REQUEST to put a search help for field hrname_1000.
after that i am trying to retrive HR related stuff's based on the field on module-pool i.e i am using hrname_1000 in the where condition.
but problem is that im not getting value for hrname_1000 which im giving in the module-pool screen.
thats y my select query is not working.
Where as im getting values for the hrname_1000 under PBO & PAI.
It will look like below.
PROCESS ON VALUE-REQUEST.
FIELD hrname_1000 MODULE hrname_1000.
(under the above module)
SELECT DISTINCT ename plans FROM pa0001 INTO CORRESPONDING FIELDS OF TABLE itab WHERE stell = '50001026'.
LOOP AT itab INTO wa WHERE ename = hrname_1000.
ENDLOOP.
Please suggest
Thanks & regards
AnsumeshIn some of the cases the screen field is present in the screen but not holding the value in the required structure or field.
so here u need to check the option of reading the screen field values explictly..
//once u hit an enter and do the f4 i think the value will be there ...but if u dont hit enter and do an F4 the value cannot hold and i think u r in this case ..
1.Fill the screen field name in the structure dynpread.
DATA: BEGIN OF DYNP_VALUES OCCURS 10.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF DYNP_VALUES.
DYNP_VALUES-FIELDNAME = 'HRNAME_1000'.
APPEND DYNP_VALUES.
* read screen values
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = HELP_REPID "call the repid of ur prog
DYNUMB = HELP_DYNNR "pass the screen number
TABLES
DYNPFIELDS = DYNP_VALUES
EXCEPTIONS
OTHERS = 1.
now dynp_values hold the field name and field value of the screen .
now
SORT DYNP_VALUES BY FIELDNAME.
READ TABLE DYNP_VALUES WITH KEY 'HRNAME_1000' BINARY SEARCH.
IF SY-SUBRC EQ 0.
HELP_XXXX = DYNP_VALUES-FIELDVALUE. "store the value into a variable
TRANSLATE HELP_XXXX TO UPPER CASE.
ENDIF.
Now check the code with the value if its getting populated which once there will make ur select work ..
Vijay.. -
Getting select options in module pool screen
hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijayHi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
IF NOT vbeln_low LE vbeln_high.
MESSAGE e899 WITH text-007. "high value is smaller than low value
ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
r_vbeln-option = 'BT'. "if user takes both low & high value
r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
title = text-002
text = ' '
signed = 'X'
* lower_case = ' '
* no_interval_check = ' '
* just_display = ' '
* just_incl = ' '
* excluded_options =
* description =
* help_field =
* search_help =
tab_and_field = tab
TABLES
range = r_vbeln
EXCEPTIONS
no_range_tab = 1
cancelled = 2
internal_error = 3
invalid_fieldname = 4
OTHERS = 5.
IF sy-subrc EQ 2.
MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir -
Selct Options in Module Pool screen.......
Hi Gurus,
We know the way to get the Select options on the Module -Pool screen as follows....
Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
I have tried the same as a test run for the FM. .but not returning meaningfull range......
Can any 1 clerify where the code containing the FM has to be included in the Screen flow (inside PAI, PBO or else) to get the range which can further be used inside the code for database selections or else..... .
Secondly, how is the inserted icon populated and used while coding........????
Thanks And Regards,
Abhi........Hi
Please find the below code u will get select options
dont create any screen fitst jus type of prog is 'M' and create a tcode with 100 screen
than execute u will get select options
TABLES:VBAP.
SELECTION-SCREEN BEGIN OF SCREEN 100 .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS S_VBELN FOR VBAP-VBELN.
PARAMETER P_WERKS LIKE VBAP-WERKS.
SELECT-OPTIONS S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN END OF SCREEN 100.
Regards
Surendra -
Make fields invisible based on selection in module pool screen
I have a several fields in my module pool screen.
There i have a box called Ref Obj.
Inside the box i have fields a b c d e f.
suppose my input has parameter 1.
I need to show only fielda a and b inside the box
suppose my input has parameter 2.
I need to show only fielda c and d inside the box
suppose my input has parameter 3.
I need to show only fielda e and f inside the box
suppose my input has parameter 4.
I should not show any fields and box should be invisible.
I would appreciate if any one could help me regarding this
Thanks in advancehi,
go through this code, and make the required changes according to u'r requirement but the logic is same.
TABLES: mara , lfa1.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_matnr LIKE mara-matnr DEFAULT 'M633640000' MODIF ID m1,
p_ersda LIKE mara-ersda DEFAULT '30.06.2004' MODIF ID m2,
p_aenam LIKE mara-aenam DEFAULT 'DOVIND' MODIF ID m3,
p_matkl LIKE mara-matkl DEFAULT '0000' MODIF ID m4,
p_meins LIKE mara-meins DEFAULT 'ST' MODIF ID m5,
p_mbrsh LIKE mara-mbrsh DEFAULT 'M' MODIF ID m6,
p_vpsta LIKE mara-vpsta DEFAULT 'KV' MODIF ID m7.
SELECTION-SCREEN: END OF BLOCK b1.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p_lifnr LIKE lfa1-lifnr DEFAULT 5070001063 MODIF ID s1 ,
p_land1 LIKE lfa1-land1 DEFAULT 'FR' MODIF ID s1,
p_name1 LIKE lfa1-name1 DEFAULT 'HONDA' MODIF ID s3,
p_ort01 LIKE lfa1-ort01 DEFAULT 'PARIS' MODIF ID s4.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'M1' .
screen-input = 0.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'M2' .
screen-invisible = 1.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'M3' .
screen-intensified = 1.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'M5' .
screen-length = 10.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'M6' .
screen-active = 0.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'M7' .
screen-display_3d = 1.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'M4' .
screen-output = 0.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'S1' AND
screen-name = 'P_LIFNR'.
screen-values_in_combo = 1.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'S1' AND
screen-name = 'P_LAND1'.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
<b>please reward points if helpfull.</b>
with regards,
radhika kolluru.
Maybe you are looking for
-
Required code for fixing HEX00 to HEX1F in transformation
Hi, i am need to remove HEX00 to HEX1F values from input data due to special characters . any one is having working code to fix the problem in transformation. i have seen some posts but not really working i think Regards Ravi
-
How to provide a list of Hierarchy-nodes for selections?
Hi specialists, some of our users often want to use some hierarchy-node-values from one report as filter of a 2nd report. For all non-hieararhy-values it is possible to do that using the clipboard. But there seems not to be a way to do the same with
-
Scroll bar does not retain its position after or before pack
Hi My Scroll bar does not retain its position after pack in my application. But i need to retain its state. My code snippet is : System.out.println("VAlue--->" + getHXValue()); scrollPane.getHorizontalScrollBar().setValue(getHXValue()); pack(); My VA
-
How to get the codecobject wich is used by a precessor in the moment
Hi there is it possible to get the the instance of the used codecclass, which was instantiated by JMF? I want to start saving the bytes out of a selfmade depacktizer. But I want to set the medialocation not static. Cloning the Datasource is not possi
-
Segment field in MM transaction Postings
Hi As we are using Derived Segment FAGL_DERIVE_SEGMENT (there is no segment assignment in PCtr master data i.e. segment identified with out PCtr also), the segment field is not coming in VA01, ME21N. What to do to get the field segment in the above t