Module pool screen modification

Hi,
I have developed a screen.
In that, the listbox gets filled up with some values for eg. customer.
after user selects the customer from the listbox, the label field should get the customer name after pressing enter key.
how to do it?
rgrds
Madhuri

hai
go to flow logic
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0010.
*&      Module USER_COMMAND_0010 INPUT
      text
MODULE USER_COMMAND_0010 INPUT.
case ok_code.
when 'ENTE'.
    select single name1
    from kna1
    into screen_label
    where kunnr eq customer.
endcase.
ENDMODULE.                 " USER_COMMAND_0010 INPUT

Similar Messages

Make fields invisible based on selection in module pool screen

I have a several fields in my module pool screen.
There i have a box called Ref Obj.
Inside the box i have fields a b c d e f.
suppose my input has parameter 1.
I need to show only fielda a and b inside the box
suppose my input has parameter 2.
I need to show only fielda c and d inside the box
suppose my input has parameter 3.
I need to show only fielda e and f inside the box
suppose my input has parameter 4.
I should not show any fields and box should be invisible.
I would appreciate if any one could help me regarding this
Thanks in advance

hi,
go through this code, and make the required changes according to u'r requirement but the logic is same.
TABLES: mara , lfa1.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_matnr LIKE mara-matnr DEFAULT 'M633640000' MODIF ID m1,
            p_ersda LIKE mara-ersda DEFAULT '30.06.2004' MODIF ID m2,
            p_aenam LIKE mara-aenam DEFAULT 'DOVIND' MODIF ID m3,
            p_matkl LIKE mara-matkl DEFAULT '0000' MODIF ID m4,
            p_meins LIKE mara-meins DEFAULT 'ST' MODIF ID m5,
            p_mbrsh LIKE mara-mbrsh DEFAULT 'M' MODIF ID m6,
            p_vpsta LIKE mara-vpsta DEFAULT 'KV' MODIF ID m7.
SELECTION-SCREEN: END OF BLOCK b1.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p_lifnr LIKE lfa1-lifnr DEFAULT 5070001063 MODIF ID s1 ,
            p_land1 LIKE lfa1-land1 DEFAULT 'FR' MODIF ID s1,
            p_name1 LIKE lfa1-name1 DEFAULT 'HONDA' MODIF ID s3,
            p_ort01 LIKE lfa1-ort01 DEFAULT 'PARIS' MODIF ID s4.
SELECTION-SCREEN: END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'M1' .
      screen-input = 0.
      MODIFY SCREEN.
    ELSE.
      IF screen-group1 = 'M2' .
        screen-invisible = 1.
        MODIFY SCREEN.
      ELSE.
        IF screen-group1 = 'M3' .
          screen-intensified = 1.
          MODIFY SCREEN.
        ELSE.
          IF screen-group1 = 'M5' .
            screen-length = 10.
            MODIFY SCREEN.
          ELSE.
            IF screen-group1 = 'M6' .
              screen-active = 0.
              MODIFY SCREEN.
            ELSE.
              IF screen-group1 = 'M7' .
                screen-display_3d = 1.
                MODIFY SCREEN.
              ELSE.
                IF screen-group1 = 'M4' .
                  screen-output = 0.
                  MODIFY SCREEN.
                ELSE.
                  IF screen-group1 = 'S1' AND
                  screen-name = 'P_LIFNR'.
                    screen-values_in_combo = 1.
                    MODIFY SCREEN.
                  ELSE.
                    IF screen-group1 = 'S1' AND
                    screen-name = 'P_LAND1'.
                      MODIFY SCREEN.
                    ENDIF.
                  ENDIF.
                ENDIF.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
<b>please reward points if helpfull.</b>
with regards,
radhika kolluru.

How to use table maintenance view in module pool screen

hi ,
want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.

You can simply call it via SM30.   Or you can call the table maintence view from any program(report or module pool) using a function module.
call function 'VIEW_MAINTENANCE_CALL'
       exporting
            action                       = 'U'
            view_name                    = 'Z_Table_Name'
       exceptions
            client_reference             = 1
            foreign_lock                 = 2
            invalid_action               = 3
            no_clientindependent_auth    = 4
            no_database_function         = 5
            no_editor_function           = 6
            no_show_auth                 = 7
            no_tvdir_entry               = 8
            no_upd_auth                  = 9
            only_show_allowed            = 10
            system_failure               = 11
            unknown_field_in_dba_sellist = 12
            view_not_found               = 13
            others                       = 14.
Regards,
RIch Heilman

Icon display in Module pool screen not visible to some users

Hi,
I have added an icon in one of the module pool screen with dynamic quick info. The page is rendered fine and the info is also displayed well for most users except some. I can't figure out why the icon is not being displayed for some users.
Do someone has any solution for this?
Thanks,
Sumith

As I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons. You can look for posting on "how to add an icon" to see a discussion on this topic.
I found some useful info at:
Create and Add Icons to table ICON?
Message was edited by: Charles Folwell

How to handle The Back button on Module Pool screen

Hi Gurus,
I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.

hi,
use AT EXIT-COMMAND with the module.
eg. module user_command at exit command.
then there will be no problem.

How to display image and data in module pool screen?

Hi,
I want to display image and relevant data besides the image in module pool screen, I am using docking container to display the image.
Actually I am able to display image or data any one but not both.
one more thing I want to display multiple images and their data.
Please suggest some one if you have any idea.
Regards,
Dileep.

You can try below way, I have used in report.
DATA: gc_docking              TYPE REF TO cl_gui_docking_container, "#EC NEEDED "Docking Container
       gc_split                 TYPE REF TO cl_gui_easy_splitter_container, "#EC NEEDED "Splitter
       gc_top_container         TYPE REF TO cl_gui_container, "#EC NEEDED "Top Container
       gc_bottom_container      TYPE REF TO cl_gui_container, "#EC NEEDED "Bottom Container
      gc_document              TYPE REF TO cl_dd_document, "#EC NEEDED "Document
       gc_events                TYPE REF TO lcl_event_class, "#EC NEEDED " Local Event Class
       gc_grid                  TYPE REF TO cl_gui_alv_grid, "#EC NEEDED " ALV Class
" Creating Docking
CREATE OBJECT gc_docking
       EXPORTING
         ratio = c_95.
     IF sy-subrc EQ 0.
* Splitting the Docking container
       CREATE OBJECT gc_split
         EXPORTING
           parent        = gc_docking
           sash_position = c_10 "Position of Splitter Bar (in Percent)
           with_border   = c_1. "With Border = 1 Without Border = 0
     ENDIF.
*   Placing the containers in the splitter
     gc_top_container = gc_split->top_left_container .
     gc_bottom_container = gc_split->bottom_right_container .
*   Creating Grid
     CREATE OBJECT gc_grid
       EXPORTING
         i_parent = gc_bottom_container.
   ELSE.
* Background job handling
     CREATE OBJECT gc_grid
       EXPORTING
         i_parent = gc_docking.
   ENDIF.
*   Creating the document
   CREATE OBJECT gc_document
     EXPORTING
       style = 'ALV_GRID'.
Regards,
Sameer

How to get the Grand Total in Module pool Screen

Hi Frds.
     How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
Kabil

Hi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
   LOOP.....
   ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
    GRAND_TOTAL = 0.
     LOOP AT ITAB,
        GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
    ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

Assigning 2 fields of same table in Module pool screen

Hi,
I want to assign similar fields of table in module pool screen.
In one case i directly use the tablename-fieldname and in other case when i try doing the same i get error. I know that this is not possible.
Is there any way to get around this. The field i am referring to is attached to a custom domain which is having defined fields. In the second assignment i need to retreive the values of the domain and display it in dropdown mode so that the users are able to select it.
Regards,
Imran

The domain only attached with this field?check the same domain attached to any other field and insert that field in the screen.
shibu
reward if helpful

How to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?

hi frnds.
My problem is in module pool screen how to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?And how to do GUI STATUS and GUI TITLE? IN SE80.
ITS URGENT.POINTS WILL BE REWADED.THANKS IN ADVANCE.

Hi,
Go through this thread.
[expand and collapse|expand and collapse]
Cheers,
Simha.

How to retain leading zeros in module pool screen

Hi experts,
I have a ztable field of type NUMC4 being displayed on a module pool screen, the value in the field is '0001', but on the screen it displays value as '1' (without leading zeros), When I save the record, Even in the databse it stores as '1'.
But I have checked in debugging the field always contains '0001' in the program execution and I have also used 'CONVERSION_EXIT_ALPHA_INPUT' in the PBO but no use.
Pls suggest.
Thanks,
Deepak

Check the screen attributes for the field. There is an option to show leading zeroes.
edit.
And how did you see it was stored a 1 and not 0001? Using SE16N? Mind you: with SE16N conversion-exits are executed automatically thus showing 0001 as 1.
To make sure: double click on the record in SE16N and look if it's still 1 and not 0001.

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

How to add logo in module pool screen

Hi Expert,
I need to display company logo in the module pool screen
how this can be added ?
Regards
Bikas

Hi,
create a custom control called 'CUSTOM_CONTROL'
CONSTANTS: CNTL_TRUE TYPE I VALUE 1,
      CNTL_FALSE type i value 0.
data:h_picture       type ref to cl_gui_picture,
     h_pic_container type ref to cl_gui_custom_container.
data: graphic_url(255),
      graphic_refresh(1),
      g_result like cntl_true.
data: begin of graphic_table occurs 0,
        line(255) type x,
      end of graphic_table.
data: graphic_size type i.
data: g_stxbmaps type STXBITMAPS,
      l_bytecnt type i,
      l_content   TYPE standard table of bapiconten initial size 0.
g_stxbmaps-tdobject = 'GRAPHICS'.
g_stxbmaps-tdname = 'ENJOY'.
g_stxbmaps-tdid = 'BMAP'.
g_stxbmaps-tdbtype = 'BMON'.
call function 'SAPSCRIPT_GET_GRAPHIC_BDS'
     exporting
          i_object       = g_stxbmaps-tdobject
          i_name         = g_stxbmaps-tdname
          i_id           = g_stxbmaps-tdid
          i_btype        = g_stxbmaps-tdbtype
     importing
          e_bytecount    = l_bytecnt
     tables
          content        = l_content
     exceptions
          not_found      = 1
          bds_get_failed = 2
          bds_no_content = 3
          others         = 4.
call function 'SAPSCRIPT_CONVERT_BITMAP'
     exporting
          old_format               = 'BDS'
          new_format               = 'BMP'
          bitmap_file_bytecount_in = l_bytecnt
     importing
          bitmap_file_bytecount = graphic_size
     tables
          bds_bitmap_file        = l_content
          bitmap_file            = graphic_table
     exceptions
          others                 = 1.
call function 'DP_CREATE_URL'
     exporting
        type                 = 'image'
        subtype              = cndp_sap_tab_unknown
        size                 = graphic_size
        lifetime             = cndp_lifetime_transaction
     tables
        data                 = graphic_table
     changing
        url                  = graphic_url
     exceptions
        others               = 4 .
create object h_pic_container
       exporting container_name = 'CUSTOM_CONTROL'.
create object h_picture exporting parent = h_pic_container.
call method h_picture->set_display_mode
     exporting
          display_mode = cl_gui_picture=>display_mode_normal.
call method h_picture->load_picture_from_url
     exporting url    = graphic_url
     importing result = g_result.
or you can check the program RSDEMO_CUSTOM_CONTROL
check link :
How to insert Image on Screen
thanks
Parvathi

How to give ** bydefault in password in module pool screen .

Hi experts
how to give ******* by default in password in module pool screen .
Thanks

Hi ,
    Double click on the field u will get a pop up window
    i.e. attribute window for that field.
    in that window you have a tab called Program at the bottom.
   in program tab you have many checkboxes.
check the check box with name *Entry.
and activate.
what ever you enter now will be in password formate
Regards
Ajay

Call module pool screen from ABAP Webdynpro

Hi All
I designed one screen in normal classical dynpro in SE80 for module pool program. I want to call that screen layout design in webdynpro view layout.
So please help me how can i call that module pool screen from my ABAP webdynpro

Hi
Thank you for your great replay. But Mr Ramakrishnappa and Mr Katrice as your reference i go through that but when i insert the program name and screen number program is end with a run time error saying
dynamic type conflict when assigning reference.
Please refer the below snap shot

Displaying MIR4 attachment list TIF image in module pool screen

Hi All,
I have a screen with a custom container and I tried to call a TIF image from MIR4 which is in attachment list(which is stored in archived link).
I need a function module to display this image in my Module pool screen using the container.
I tried using below code
* Create controls
     CREATE OBJECT container_1
       EXPORTING
         container_name = 'CONTAINER'.
*    create object container_2
*      exporting container_name = 'PICTURE_CONTROL_2'.
     CREATE OBJECT PICTURE_CONTROL_1
       EXPORTING
         parent = container_1.
*    CREATE OBJECT PICTURE_CONTROL_2 exporting parent = container_2.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL
       EXPORTING
*    URL    = 'SAPR3://984BE16932C81EE3B2AA1E3B0D12C6FF'
*      URL    = 'file://E:\Personal\New_Passport4.jpg'
*       URL    = 'SAPR3://984BE16932C81EE3B2BDF8E44B035648.TIF'
*URL    = 'SAPR3://SAPR3CMS/get/100/Z1/984BE16932C81EE3B2BDF8E44B035648//.TIF'.
     URL    = 'SAPR3://WebRepository/0020698212/DEMOWORD97SAPLOGO?Version=00000'
     IMPORTING
          RESULT = lv_result.
CALL METHOD PICTURE_CONTROL_1->set_display_mode
     EXPORTING
       display_mode = PICTURE_CONTROL_1->display_mode_fit_center.
But I am able to display this URL    = 'SAPR3://WebRepository/0020698212/DEMOWORD97SAPLOGO?Version=00000' and not able to display my archive link image which is in TIF.
note: Display image of Arc.link Doc.type ZBUSI_TIF (doc.class TIF)
Please help me on this.
Thanks
Geetha Charan

Hi sai,
Please refer th procedure.
For the select-options you might have defined a selection screen.
Next you can fetch the entire data that you wanted to display in a module pool into an internal table.
you can call the screen you defined for o/p upon the selection.
Then, You define a screen XXXX and a table control in the scree, and in the PAI module of the screen
you write a chain end chain processing in which you can display the contents of your internal table.
OR
if you want the selection also to be in the module pool, then for displaying the O/P you can definr a sub-screen of the initial screen and you can call that sub-screen on selcting, which can be done with a function code.
Hope this helps

Module pool screen modification

Similar Messages

Maybe you are looking for