Module Pool -Screen Sequence--etc

Hi Folks,
1.Can we change the screen sequence of standard transaction say for ex va02.?
2.If so how?
3.Will we able to see the layout editor of a standard transaction?
4.Can we change the layout there if we get the access key?
Points will be given.
K.Kiran.

Hi,
We can change the screen sequence of the Std Transactions by taking the access key, But this is not advisable to do.
If you wants to add some extra fields on Std screens, using screen exits we have to add and write the code to populate.
We can see the Std layout of the transaction from SE51, enter screen number and display,
Even you can change by taking the access key, but as I told this is not advisable.
Instead use Screen exits to do changes.
reward if useful
regards,
Anji

Similar Messages

  • How to creat select-option on module pool screen???

    Hi All,
       please tell me how to creat select-option on module pool screen???
    Regards
    Deepak

    Hi Deepak Kumar Sharma,
    There are Two ways to achieve it...
    1) How to create a select-options in a module pool screen.
    Method 1
    a) Create a subscreen area in your screen layout where you want to create the select options.
    b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
    SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
    select-options s_matnr for mara-matnr.
    SELECTION-SCREEN END OF SCREEN.
    c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
    CALL SUBCREEN sub_area INCLUDING <program> <screen>
    This call subscreen statement is necessary for transport of values between screen and program.
    Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
    Method 2
    a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
    struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
    struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
    CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
    TITLE = ' '
    text = g_titl1 " 'Customers'
    tab_and_field = struc_tab_and_field
    TABLES
    RANGE = rng_kunnr
    EXCEPTIONS
    NO_RANGE_TAB = 1
    CANCELLED = 2
    INTERNAL_ERROR = 3
    INVALID_FIELDNAME = 4
    OTHERS = 5.
    IF NOT rng_kunnr[] IS INITIAL.
    Read the very first entry of the range table and pass it to
    dynpro screen field
    READ TABLE rng_kunnr INDEX 1.
    IF sy-subrc = 0.
    g_cust = rng_kunnr-low.
    ENDIF.
    You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
    Also have a look on below threads
    how to make select option in module pool
    select option in module pool program
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7

  • How to print the Module pool screen using a push button in the screen

    Hi Every one,
                         i have developed a module program , which have a selection screen and it display the output in a structured way.
    output includes boxes, texts etc...
    my problem is :---
    How to print the Module pool screen using a push button in the screen.

    When the "Print" button is pressed:
    leave to list-processing and return to screen 100.  "(current screen)
    Call a transaction that runs your print program.
    Rob

  • Display Progress Indicator in Module-pool Screen

    Hi,
    I want to draw a Progress Indicator (fixed progress bar) in my own module pool screen. (It will be a little graphic, that will represent total percentage of the work that has been done till date.)
    I tried to take reference from the existing programs:
    GFW_PROG_PIE
    GFW_DEMO_PRES1
    GFW_PROG_BAR
    DEMO_GFW_PRES_SHOW u2026
    -but these programs can draw only charts (pie, bar etc).
    Looking for your help!!!
    Thanks,
    Tushar

    Hi,
    you can use Function Module SAPGUI_PROGRESS_INDICATOR.
    Hope this helps!
    Regards
    Mark-André

  • How to download ABAP(report,module pool...etc) source code to client PC?

    hi guys,
    please advise how can i download/export ABAP(report,module pool...etc) source code to client PC?
    thanks.

    hi
    this report is to export to another server...
    PROGRAM ZDOWNLOAD_SAP
    LINE-SIZE 132
    LINE-COUNT 62
    NO STANDARD PAGE HEADING.
    This program up / downloads from / to a local dataset
    all the components of an ABAP - i.e TEXTS, the entire CUA
    including statuses and menus, DYNPROS and source code.
    Program documentation and variants are not handled.
    INCLUDED programs are automatically handled both on upload
    or download. INCLUDE selection can be excluded or generic
    e.g only handle INCLUDES starting with ZIN*
    INCLUDES within INCLUDES alos handled.
    The only restriction is on UPLOAD the INCLUDED programs must come
    from the same directory as the main program.
    On Download of course the ABAP must exist in the library.
    Note for LINUX and BATCH users
    This program was originally designed as a one off tool for
    getting ABAPS etc from a SAP R2 (IBM MVS mainframe system) into
    an R3 test system minimising the need for a large amount of
    mainframe sysprogs (anybody remember what they were !!) time
    and support to say nothing of access problems from TSO /JES2 /
    SAP R2. At that time network connections were patchy and the
    transport systems largely incompatable and not very reliable.
    This program was originally designed as a one off tool for
    Must run on Windows front end ---- If you are running SAP with
    LINUX on your work station you will have to change the WS_UPLOAD
    and WS_DOWNLOAD functions to reflect the Linux file system. The
    contents of the data sets themseleves do not need to be changed
    Program can easily be modified to run in batch and store
    the data on a UNIX host. Change the WS_UPLOAD and WS_DOWNLOAD
    to read from and write to UNIX data sets (OPEN FILE etc).
    You will also need to modify the parts of the program that get
    the DOS directory and display the Windows file paths.
    The actual abap data sets do not need to be changed.
    Rel 4.0 names can now be up to 40 bytes long
    Dynpros and CUA have changed from rel 3.1
    Tabstrips now loaded and unloaded in dynpros
    Please note restriction on 4.6 systems for users who
    have ABAP names which include '/'s in their names.
    Rel 4.6b, 4.6c Abap names can include the '/' in their names
    e.g /CUST1/CUST2/ORDER
    This causes problems when storing to a local file.
    a solution is to change the name to %CUST1%CUST2%ORDER i.e / will
    be changed to %. On upload the % should be changed back to /
    again. This change still needs to be implemented.
    If you don't use the / in the abap name then this is not a problem.
    If file to be uploaded is in rel 3 format then names are only 8
    bytes long.
    program uses 3 datasets per abap
    1) abapname.eee source, dynpr logic, texts, CUA stuff
    2) abapname.hhh dynpr header
    3) abapname.fff dynpro fields.
    because of varying lengths and contents 3 data sets are used. The
    complexity of combining all these to 1 data set would make the
    program far too complex.
    NOTE: This version of the program can only be used on
    release 4.0 or higher. Once an ABAP has been converted
    to rel 4.0 it cannot be converted back to rel 3.0
    on a release 3/3.1 system. Release 4 CUA tables
    are different. Use release 3 version of this program
    for releases 3.0 and 3.1. Available on SAPFANS website.
    Note that data to be uploaded must have been previously downloaded
    by this program (any version since rel 2.0) - except for Initial
    Load -- see end of these comments.
    Dynpros and CUA statuses have changed since rel 3.1
    This program will handle rel 3.1 format on upload but will
    download in rel 4.0 format. To upload 3.1 format specify an 'X'
    in the rel3 parameter.
    If you have downloaded components in rel 4.0 format and you
    want to re-load to a 3.1 system you will have to load
    the source via standard upload and re-create dynpros and the CUA
    manually.
    As names can now be longer than 8 characters you can only
    use this program if the SAP front end (SAPGUI) supports
    long file names (WIN 95/98 or WIN NT). Windows 3.x will not
    work as the underlying DOS system cannot handle long file names.
    UPLOAD function and DOS directory.
    When an ABAP is selected for UPLOAD then the DOS
    directory is read into a table. A file called ABAP.BAT is created,
    and down loaded to the 'C' drive and executed.
    This file executes a DOS DIR command and pipes the output
    into a dataset which is then uploaded into an internal
    table on SAP.
    Note on running DOS commands from ABAP
    The first time this procedure is executed you will see a DOS window
    which you will have to close manually. To get round this
    use windows explorer to select the file ABAP.BAT and then
    right mouse click on the file name. Select the
    properties window. From this click the CLOSE on EXIT box. This
    will then automatically close the DOS function after it has
    executed. (Windows restriction).
    The DOS function has not been tested using Windows 2000 so
    it might not work. OK on W95,W98,WME and Windows NT (No Thanks)
    If INCLUDE programs are wanted on UPLOAD only the specified
    directory is searched.
    Instead of entering path name manually you can click on
    the path parameter. Because of Windows restriction you will
    have to select ANY file in the relevant directory.
    The path will then be copied on to the selection screen.
    To do still : Merge 3 files to one and compress output to .ZIP file
    fix 4.5 4.6 problem of abaps containing '/' in the name
    possibility to automatically up / download referenced
    function modules with selection criteria like INCLUDES
    To load the ist time into a system.
    Create program with ABAP editor and Upload the .EEE file.
    Delete ist line (????SRCE) in the ABAP EDITOR --NOT THE DISK FILE
    Delete all the source from the line that starts ????TEXT (towards
    the end file) till the end so the last line in your source is ENDFORM.
    DO NOT ALTER THE DISK FILE. DO THESE CHANGES IN THE ABAP EDITOR.
    Save file and execute
    Use following parameters (Note the ist time you won't get proper
    text on the selection screen).
    Function U
    Path full dos path containing source e.g c:\abaps\
    NOTE YOU MUST ENTER THE FINAL \ as above.
    REPID the program name. e.g ZZJIMHXX
    note that on the DISK you will see 3 files
    ZZJIMHXX.EEE, ZZJIMHXX.FFF, ZZJIMHXX.HHH
    just use the name before the dos qualifier - the
    program will do the rest
    ignore other parameters
    The program will then load itself with all the texts etc.
    It should now be ready for use.
    Macros
    DEFINE DEFINE_TABLE.
    DATA: &1 LIKE &2 OCCURS &3 WITH HEADER LINE.
    END-OF-DEFINITION.
    DEFINE CLS.
    REFRESH &1.
    CLEAR &1.
    END-OF-DEFINITION.
    DEFINE INIT.
    IF &1 NE SPACE.
    SEARCH &1 FOR '. .'.
    IF SY-SUBRC = 0.
    WRITE '*' TO &1+SY-FDPOS(1).
    ENDIF.
    TRANSLATE &1 USING '*%'.
    ELSE.
    MOVE '%' TO &1.
    ENDIF.
    END-OF-DEFINITION.
    end of macros
    / SAP standard tables */
    TABLES: D020S, "Dynpro header
    D020T, "Dynpro title
    D021T, "Screen field keyword texts
    TRDIR, "Attribute table
    TADIR, "Dev. class etc.
    EUDB, "CUA data
    TSTC, "transaction data
    TITLE, "CUA titles
    RSMPTEXTS. "Function texts (rel 4.0)
    / Work tables to hold ABAP source etc, and dynpro */
    / contents. */
    DATA: BEGIN OF H. "Header
    INCLUDE STRUCTURE D020S.
    DATA: END OF H.
    DATA: BEGIN OF H1 OCCURS 10, "Header
    NAME(40) TYPE C, "rel 4
    NUMBER(4) TYPE N.
    INCLUDE STRUCTURE D020S.
    DATA: END OF H1.
    DATA: BEGIN OF H2 OCCURS 0, "Rel 3 dynp. header
    CNAME(8) TYPE C,
    CNUM(4) TYPE C,
    NNAME(8) TYPE C,
    NNUM(4) TYPE C,
    FILL(51) TYPE C,
    CDAT(6) TYPE C,
    CTIM(6) TYPE C,
    END OF H2.
    DATA: BEGIN OF F OCCURS 250. "Dynpro Fields
    INCLUDE STRUCTURE D021S.
    DATA: END OF F.
    DATA: BEGIN OF F1 OCCURS 500, "Dynpro Fields
    NAME(40) TYPE C, "rel 4
    NUMBER(4) TYPE N.
    INCLUDE STRUCTURE D021S.
    DATA: END OF F1.
    DATA: BEGIN OF OLD_F1 OCCURS 0, "Dynpro Fields (rel 3)
    NAME(8) TYPE C,
    NUMBER(4) TYPE C.
    INCLUDE STRUCTURE D021SE_OLD.
    DATA: END OF OLD_F1.
    DATA: BEGIN OF F2 OCCURS 0, "Dynpro Fields (rel 3)
    TFIL(284) TYPE C,
    END OF F2.
    DATA: BEGIN OF M OCCURS 3. "Match codes (if any)
    INCLUDE STRUCTURE D023S.
    DATA: END OF M.
    DATA: BEGIN OF E OCCURS 0. "Dynpro Logic
    INCLUDE STRUCTURE D022S.
    DATA: END OF E.
    DATA: BEGIN OF E1 OCCURS 0, "Dynpro Logic
    NAME(40) TYPE C, "rel 4
    NUMBER(4) TYPE N.
    INCLUDE STRUCTURE D022S.
    DATA: END OF E1.
    DATA: BEGIN OF T OCCURS 0, "prog name and dynpro nrs
    NAME(40) TYPE C, "rel 4
    NUMBER(4) TYPE N,
    END OF T.
    DATA: BEGIN OF R OCCURS 56, "prog name and language
    NAME(40) TYPE C, "rel 4
    LANGUAGE(1) TYPE C,
    END OF R.
    DATA: BEGIN OF S OCCURS 3000,
    TXT(180) TYPE C, "rel 4 was 132
    END OF S.
    DATA: BEGIN OF R1 OCCURS 50, "for include programs
    NAME(40) TYPE C, "rel 4
    INSTANCE(3) TYPE P,
    END OF R1.
    DATA: BEGIN OF S1 OCCURS 3000,
    TXT(180) TYPE C, " rel 4 was 132
    END OF S1.
    DATA: BEGIN OF U OCCURS 100, "Text elements
    TXT(180) TYPE C, " rel 4 was 132
    END OF U.
    DATA: BEGIN OF DIR. "ABAP Attributes
    INCLUDE STRUCTURE TRDIR.
    DATA: END OF DIR.
    DATA: BEGIN OF DTXT. "Dynpro field keyword texts
    INCLUDE STRUCTURE D021T.
    DATA: END OF DTXT.
    / This data contains all the components of the */
    / CUA such as menus, statuses, Pfkeys */
    / As from rel 4.5 Tabstrips are automatically copied as well */
    / The rel3 parameter must be set however to load the */
    / correct version of the CUA tables if uploading rel 3 */
    / data to a rel 4 system. */
    / Rel 4.0B can convert 3.1 and earlier CUA's */
    / This could change later however. */
    CUA Tables.
    Key of CUA tables in EUDB data set. Name is len 40 in rel 4.0
    DATA BEGIN OF EU_KEY.
    INCLUDE STRUCTURE RSEU1_KEY.
    DATA END OF EU_KEY.
    Status
    DATA BEGIN OF STA OCCURS 0.
    INCLUDE STRUCTURE RSMPE_STAT. " rel 4
    DATA END OF STA.
    Functions
    DATA BEGIN OF FUN OCCURS 0.
    INCLUDE STRUCTURE RSMPE_FUNT. "rel 4
    DATA END OF FUN.
    Menus
    DATA BEGIN OF MEN OCCURS 0.
    INCLUDE STRUCTURE RSMPE_MEN. "rel 4.0
    DATA END OF MEN.
    Menus (texts)
    DATA BEGIN OF MTX OCCURS 0.
    INCLUDE STRUCTURE RSMPE_MNLT. "rel 4.0
    DATA END OF MTX.
    Action Bar
    DATA BEGIN OF ACT OCCURS 0.
    INCLUDE STRUCTURE RSMPE_ACT. "rel 4.0
    DATA END OF ACT.
    Push Buttons
    DATA BEGIN OF BUT OCCURS 0.
    INCLUDE STRUCTURE RSMPE_BUT. "rel 4.0
    DATA END OF BUT.
    PF-Keys
    DATA BEGIN OF PFK OCCURS 0.
    INCLUDE STRUCTURE RSMPE_PFK. "rel 4.0
    DATA END OF PFK.
    Function sets
    DATA BEGIN OF SET OCCURS 0.
    INCLUDE STRUCTURE RSMPE_STAF. "rel 4.0
    DATA END OF SET.
    Documentation
    DATA BEGIN OF DOC OCCURS 0.
    INCLUDE STRUCTURE RSMPE_ATRT. "rel 4.0
    DATA END OF DOC.
    Title codes with text
    DATA: BEGIN OF TIT OCCURS 0.
    INCLUDE STRUCTURE RSMPE_TITT. "rel 4.0
    DATA: END OF TIT.
    DATA BEGIN OF FTX OCCURS 0. "rel 4.0
    INCLUDE STRUCTURE RSMPTEXTS.
    DATA END OF FTX.
    rel 3.1 CUA components.
    Status
    DATA BEGIN OF OLD_STA OCCURS 0.
    INCLUDE STRUCTURE RSEU1_GEN. " rel 3.1
    DATA END OF OLD_STA.
    Functions
    DATA BEGIN OF OLD_FUN OCCURS 0.
    INCLUDE STRUCTURE RSEU1_FUN. "rel 3.1
    DATA END OF OLD_FUN.
    Menus
    DATA BEGIN OF OLD_MEN OCCURS 0.
    INCLUDE STRUCTURE RSEU1_MEN. "rel 3.1
    DATA END OF OLD_MEN.
    Menus (texts)
    DATA BEGIN OF OLD_MTX OCCURS 0.
    INCLUDE STRUCTURE RSEU1_TXM. "rel 3.1
    DATA END OF OLD_MTX.
    Action Bar
    DATA BEGIN OF OLD_ACT OCCURS 0.
    INCLUDE STRUCTURE RSEU1_ACT. "rel 3.1
    DATA END OF OLD_ACT.
    Push Buttons
    DATA BEGIN OF OLD_BUT OCCURS 0.
    INCLUDE STRUCTURE RSEU1_BUT. "rel 3.1
    DATA END OF OLD_BUT.
    PF-Keys
    DATA BEGIN OF OLD_PFK OCCURS 0.
    INCLUDE STRUCTURE RSEU1_PFK. "rel 3.1
    DATA END OF OLD_PFK.
    Function sets
    DATA BEGIN OF OLD_SET OCCURS 0.
    INCLUDE STRUCTURE RSEU1_SET. "rel 3.1
    DATA END OF OLD_SET.
    Documentation
    DATA BEGIN OF OLD_DOC OCCURS 0.
    INCLUDE STRUCTURE RSEU1_ETM. "rel 3.1
    DATA END OF OLD_DOC.
    Title codes with text
    DATA: BEGIN OF OLD_TIT OCCURS 0.
    INCLUDE STRUCTURE TITLE. "rel 3.1
    DATA: END OF OLD_TIT.
    dynamic function text
    DATA BEGIN OF FDN OCCURS 1.
    INCLUDE STRUCTURE RSEU1_FDYN. "not req for rel 4.
    DATA END OF FDN.
    Icons
    DATA BEGIN OF FIN OCCURS 1.
    INCLUDE STRUCTURE RSEU1_ICON. "not req for rel 4
    DATA END OF FIN.
    dynamic menu texts
    DATA BEGIN OF MDN OCCURS 1.
    INCLUDE STRUCTURE RSEU1_MDYN. "not req for rel 4.
    DATA END OF MDN.
    Symbol list
    DATA BEGIN OF SYM OCCURS 0.
    INCLUDE STRUCTURE RSEU1_SYMB.
    DATA END OF SYM.
    Status Short text
    DATA BEGIN OF STX OCCURS 0.
    INCLUDE STRUCTURE RSEU1_CTX.
    DATA END OF STX.
    Attributes for function key settings (menu bars) Rel 3.0
    DATA BEGIN OF ATT OCCURS 0.
    INCLUDE STRUCTURE RSEU1_HAT.
    DATA END OF ATT.
    Include-Menus
    DATA BEGIN OF INC OCCURS 3.
    INCLUDE STRUCTURE RSEU1_INC.
    DATA END OF INC.
    Last used numbers
    DATA BEGIN OF LAST.
    INCLUDE STRUCTURE RSEU1_LST.
    DATA END OF LAST.
    data for call transaction (SE41 to re-generate the CUA)
    DATA: BEGIN OF T_BDC_TAB OCCURS 0.
    INCLUDE STRUCTURE BDCDATA. "BDC data
    DATA: END OF T_BDC_TAB.
    DATA: BEGIN OF T_MESSTAB OCCURS 0.
    INCLUDE STRUCTURE BDCDATA.
    DATA: END OF T_MESSTAB.
    / Program data */
    DATA: NUMBER(4) TYPE N,
    OLDNUM(4) TYPE N,
    FILESIZE TYPE I,
    NR_OF_BYTES TYPE I,
    I(3) TYPE P,
    IX(3) TYPE P,
    J(3) TYPE P,
    L(3) TYPE P,
    CUA-FLAG(1) TYPE C,
    CUA_RETURN(10) TYPE C,
    DYNPRO_MESSAGE(160) TYPE C,
    DYNPRO_LINE TYPE P,
    DYNPRO_WORD(30) TYPE C,
    NUM(3) TYPE N,
    DYNNAME(44) TYPE C,
    FN1(128) TYPE C,
    FN2(128) TYPE C,
    FN3(128) TYPE C,
    W_ITERATE(1) TYPE C,
    MAIN(1) TYPE C,
    FUNC(1) TYPE C,
    OLDNAME(40) TYPE C,
    OLD-FUNC(8) TYPE C,
    NEW-FUNC(8) TYPE C,
    FOUND(1) TYPE C,
    LANGUAGE LIKE SY-LANGU,
    FIRST-TIME(1) TYPE C VALUE 'Y',
    OK-CODE(5) TYPE C,
    NAME(40) TYPE C, "rel 4
    TXLINE(70) TYPE C,
    LINE(132) TYPE C.
    DATA:
    UL_FILE(128) TYPE C,
    DL_FILE(128) TYPE C,
    DOSLINE(72) TYPE C.
    DATA: BEGIN OF DOSDIR OCCURS 0,
    TEXT(72),
    END OF DOSDIR.
    DATA: BEGIN OF I_PROG OCCURS 0,
    NAME(40),
    END OF I_PROG.
    DATA: BEGIN OF I_PROGT OCCURS 0,
    NAME(40),
    END OF I_PROGT.
    DATA: BEGIN OF I_INCLUDE OCCURS 0,
    NAME(40),
    HANDLED(1) TYPE C,
    END OF I_INCLUDE.
    DATA: BEGIN OF I_INCL OCCURS 0,
    NAME(40),
    END OF I_INCL.
    DATA: BUFFER(1024).
    DATA: WINSYS(3).
    DATA: GLOBAL_FILEMASK_MASK(20), GLOBAL_FILEMASK_TEXT(20).
    DATA: GLOBAL_FILEMASK_ALL(80).
    DATA: T_FILENAME(128),
    TMP_FILENAME(128),
    T_MODE(1),
    FIELDLN TYPE I.
    DEFINE_TABLE I_DYNPFIELDS DYNPREAD 0. "dynpro fields to be updated
    DATA: I_FLDS LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE.
    FIELD-SYMBOLS: <F>.
    / Parameters */
    SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN SKIP 1.
    SELECT-OPTIONS REPID FOR TRDIR-NAME OBLIGATORY .
    PARAMETERS:
    FUNCTION(1) TYPE C OBLIGATORY, "Function
    DSNAME(40) TYPE C, "Data set name
    INCLUDES(1) TYPE C DEFAULT 'N', "Resolve Includes
    IMASK(40) TYPE C, "Include Mask
    CLASS LIKE TRDIR-CLAS,
    AUTHOR LIKE TRDIR-CNAM, "Author
    APPL LIKE TRDIR-APPL,
    PATH(88) TYPE C DEFAULT 'A:\',
    REL3(1) TYPE C.
    SELECTION-SCREEN SKIP 1.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(70) TEXT-004.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(70) TEXT-005.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN SKIP 1.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(70) TEXT-002.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(70) TEXT-003.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK A1.
    / Check users workstation is running WINDOWS, */
    / WINDOWS 95, or WINDOWS NT. OS/2 no good for */
    / this application. */
    CALL FUNCTION 'WS_QUERY'
    EXPORTING
    QUERY = 'WS'
    IMPORTING
    RETURN = WINSYS.
    IF WINSYS(2) NE 'WN'. "Win 3.X no good either
    WRITE: / 'Windows NT or Windows 95/98 is required'.
    EXIT.
    ENDIF.
    / Get names of programs to be handled. */
    / Name can be a single value, many values or ranges */
    / as per standard SELECT-OPTIONS on selection screen */
    / On Download read TRDIR and store program names in a table */
    / as per selection options. */
    / On upload read the specified directory for all files of */
    / type .EEE from specified directory */
    / compare file names with selection criteria */
    MOVE FUNCTION TO FUNC.
    MOVE 'Y' TO MAIN.
    CASE FUNC.
    WHEN 'U'. "Upload required
    PERFORM READ_DOS_DIRECTORY.
    PERFORM GET_RANGE_UL. "Get list of progs to process
    WHEN 'D'. "Download required
    PERFORM GET_RANGE_DL. "Get list of progs to process
    WHEN OTHERS.
    WRITE: / 'Function not performed due to user request'.
    EXIT.
    ENDCASE.
    SORT I_PROG.
    DELETE ADJACENT DUPLICATES FROM I_PROG.
    For download INCLUDE handling can be resolved via function
    module call.
    All Includes within Includes are also resolved by the function
    module call.
    Note that this method does not work if program itself is of type
    I (it's an include)
    In this case we can still search the source.
    IF FUNC = 'D'.
    IF INCLUDES = 'Y'.
    PERFORM GET_INCLUDES_DL.
    PERFORM PROCESS_INCLUDES_DL.
    ENDIF.
    ENDIF.
    Program list from selection criteria i.e excluding INCLUDES found
    LOOP AT I_PROG.
    MOVE I_PROG-NAME TO R1-NAME.
    APPEND R1.
    DESCRIBE TABLE R1 LINES I.
    WHILE I NE 0.
    PERFORM EXECUTE-FUNCTION.
    ENDWHILE.
    REFRESH R1.
    ENDLOOP.
    We need to check now for INCLUDES on DOWNLOAD when the INCLUDE
    program itself is of type I. In this case the function call
    will not return the INCLUDES. For example we could be
    downloading ZTESTTOP (an Include itself) which as an include
    ZTEST01.
    The process fortunately is the same as the UPLOAD function
    except of course we need to read the library instead of the
    DOS directory
    process INCLUDE modules for Upload
    On upload the procedure is more complex as Includes within
    Includes can only be resolved by scanning the code and
    searching if the program exists in the directory.
    To get all INCLUDES within INCLUDES entries in table I_INCL
    that do not exist in I_INCLUDE are copied to table I_INCLUDE
    after each entire pass of table i_INCLUDE and table is then
    re-looped through. Programs in table I_INCLUDE that have already
    been processed have a "Y" indicator set in I_INCLUDE-AVAIL.
    if func = 'U'.
    IF INCLUDES = 'Y'.
    DESCRIBE TABLE I_INCL LINES I.
    IF I > 0.
    W_ITERATE = 'Y'.
    ELSE.
    W_ITERATE = ' '.
    ENDIF.
    WHILE W_ITERATE = 'Y'.
    PERFORM PROCESS_INCLUDES_UL.
    PERFORM LOOP_THROUGH.
    DESCRIBE TABLE I_INCL LINES I.
    IF I > 0.
    W_ITERATE = 'Y'.
    ELSE.
    W_ITERATE = ' '.
    ENDIF.
    ENDWHILE.
    endif.
    ENDIF.
    DESCRIBE TABLE I_INCLUDE LINES I.
    IF I > 0.
    SKIP 1.
    WRITE: / ' Included Programs found'.
    SKIP 1.
    LOOP AT I_INCLUDE.
    WRITE I_INCLUDE-NAME TO LINE(40).
    CONDENSE LINE.
    WRITE: / LINE(80).
    ENDLOOP.
    ENDIF.
    / Table R contains ABAP names to up / download. */
    / Loop through table R and perform up / download */
    / for each program. */
    / Table R1 contains INCLUDE names found (if any) */
    / As each */
    FORM EXECUTE-FUNCTION.
    LOOP AT R1.
    MOVE-CORRESPONDING R1 TO R.
    APPEND R.
    ENDLOOP.
    REFRESH R1.
    LOOP AT R.
    REFRESH : T, E1, H1, F1, S, U.
    PERFORM PROCESS.
    MOVE 'N' TO MAIN.
    ENDLOOP.
    REFRESH R.
    DESCRIBE TABLE R1 LINES I.
    ENDFORM.
    / Build file names for UP/DOWNLOAD */
    / 3 files are generated per ABAP. */
    / 1) ABAP Path\PROGNAME.EEE (ABAP, Attr,Texts) */
    / Logic Path\PROGNAME.EEE (Dynpro Source Logic) */
    / CUA Path\PROGNAME.EEE (CUA components - keys etc) */
    / 2) Header Path\PROGNAME.HHH (Dynpro Header) */
    / 3) Fields Path\PROGNAME.FFF (Dynpro Field definitions )*/
    / ( If alternate file name specified -DSNAME- this will */
    / be used instead. This is only valid for the main program. */
    / INCLUDED programs will have file names as specified */
    / above). */
    / By using this scheme it saves the user from having to */
    / be prompted for 3 file names. */
    / If you want multiple copies / versions on disk either */
    / rename the old versions or specify a different directory in */
    / the path parameter. */
    FORM PROCESS.
    MOVE PATH TO FN1.
    CASE MAIN.
    WHEN 'Y'.
    IF DSNAME NE SPACE.
    WRITE DSNAME TO FN1+66. "rel 4
    ELSE.
    WRITE R-NAME TO FN1+66. "rel 4
    ENDIF.
    WHEN OTHERS.
    WRITE R-NAME TO FN1+66. "rel 4
    ENDCASE.
    MOVE FN1 TO FN2.
    MOVE FN1 TO FN3.
    WRITE '.HHH' TO FN1+124(4). "rel 4
    WRITE '.FFF' TO FN2+124(4). "rel 4
    WRITE '.EEE' TO FN3+124(4). "rel 4
    CONDENSE FN1 NO-GAPS.
    CONDENSE FN2 NO-GAPS.
    CONDENSE FN3 NO-GAPS.
    NAME = R-NAME.
    CASE FUNC.
    WHEN 'D'.
    PERFORM DOWNLOAD_OBJECTS.
    CLEAR LINE.
    WRITE : 'ABAP : ' TO LINE.
    WRITE R-NAME TO LINE+8.
    WRITE 'has been unloaded' TO LINE+55.
    CONDENSE LINE.
    WRITE: / LINE.
    DESCRIBE TABLE T LINES I.
    IF I = 0.
    WRITE: / 'No Dynpros were found for unload function'.
    ELSE.
    WRITE: / 'The following Dynpros have been unloaded : '.
    PERFORM LOOP_THROUGH_T.
    ENDIF.
    WHEN 'U'.
    PERFORM UPLOAD_OBJECTS.
    DESCRIBE TABLE T LINES I.
    CASE I.
    WHEN 0.
    WRITE: / 'No Dynpros were found for restore function'.
    WHEN OTHERS.
    WRITE: / 'The following Dynpros have been restored : '.
    PERFORM LOOP_THROUGH_T.
    ENDCASE.
    IF MAIN EQ 'Y'.
    CASE OLDNAME.
    WHEN SPACE.
    CLEAR LINE.
    WRITE : 'ABAP : ' TO LINE.
    WRITE R-NAME TO LINE+8.
    WRITE 'has been restored' TO LINE+55.
    CONDENSE LINE.
    WRITE: / LINE.
    WHEN OTHERS.
    CLEAR LINE.
    WRITE : 'ABAP : ' TO LINE.
    WRITE R-NAME TO LINE+8.
    WRITE 'has been restored - original name :'
    TO LINE+55.
    WRITE OLDNAME TO LINE+92.
    CONDENSE LINE.
    WRITE: / LINE.
    ENDCASE.
    ELSE.
    CLEAR LINE.
    WRITE : 'ABAP : ' TO LINE.
    WRITE R-NAME TO LINE+8.
    WRITE 'has been restored' TO LINE+55.
    CONDENSE LINE.
    WRITE: / LINE.
    ENDIF.
    ENDCASE.
    ENDFORM.
    / print progname + dynpro nrs that have been processed. */
    FORM LOOP_THROUGH_T.
    LOOP AT T.
    CLEAR LINE.
    WRITE R-NAME TO LINE.
    WRITE T-NUMBER TO LINE+50.
    CONDENSE LINE.
    WRITE: / LINE.
    ENDLOOP.
    ENDFORM.
    / Download Objects */
    FORM DOWNLOAD_OBJECTS.
    PERFORM UNLOAD_ABAP. "ABAP source, texts, attr
    SELECT SINGLE * FROM TRDIR
    WHERE NAME EQ R-NAME.
    IF TRDIR-SUBC = 'I'.
    CASE INCLUDES. "Included file wanted
    WHEN 'Y'.
    PERFORM SCAN4-INCLUDES.
    ENDCASE.
    ENDIF.
    PERFORM UNLOAD_CUA. "CUA stuff
    PERFORM DOWNLOAD_DATA. "Download EEE file to PC
    PERFORM BUILD_T. "Build table of all dynpros in ABAP
    DESCRIBE TABLE T LINES I.
    CASE I.
    WHEN 0. "if no dynpros exist then cannot download any
    PERFORM DOWNLOAD_DATA. "Download EEE file to PC
    WHEN OTHERS.
    PERFORM UNLOAD_DYNPROS. "Get Raw dynpros from SAP
    PERFORM UNLOAD_DYNPRO_COMPONENTS."Convert to table
    PERFORM DOWNLOAD_DATA. "Download ABAP etc. to PC
    PERFORM DOWNLOAD_BIN_H1. "Download dynpro header
    PERFORM DOWNLOAD_BIN_F1. "Download dynpro fields
    ENDCASE.
    ENDFORM.
    / Split ABAP up into its component parts */
    / A) Program source (72) */
    / B) Texts (132) */
    / C) Attributes (117) */
    / D) CUA stuff (Various) */
    FORM UNLOAD_ABAP.
    / Get ABAP language. Only required on download. */
    SELECT SINGLE * FROM TRDIR
    WHERE NAME EQ R-NAME.
    MOVE TRDIR-RLOAD TO R-LANGUAGE.
    READ REPORT R-NAME INTO S. "Get source into table S
    MOVE '????SRCE' TO S-TXT.
    INSERT S INDEX 1.
    / Text elements, Numbered texts, headings, selection texts */
    / Read text elements with logon language. If they don't */
    / exist read with the value taken from TRDIR. */
    READ TEXTPOOL R-NAME INTO U LANGUAGE SY-LANGU.
    IF SY-SUBRC NE 0.
    READ TEXTPOOL R-NAME INTO U LANGUAGE R-LANGUAGE.
    ENDIF.
    DESCRIBE TABLE U LINES I.
    CASE I.
    WHEN 0.
    WHEN OTHERS.
    MOVE '????TEXT' TO S-TXT.
    APPEND S.
    LOOP AT U.
    MOVE U-TXT TO S-TXT.
    APPEND S.
    DELETE U.
    ENDLOOP.
    ENDCASE.
    / Retrieve Attributes from TRDIR and add to table S */
    / Change language to logged on language */
    MOVE '????ATTR' TO S-TXT.
    APPEND S.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME EQ R-NAME.
    MOVE SY-LANGU TO TRDIR-RLOAD.
    MOVE-CORRESPONDING TRDIR TO DIR.
    MOVE DIR TO S-TXT.
    APPEND S.
    ENDFORM.
    / retrieve CUA stuff and append to table S. */
    FORM UNLOAD_CUA.
    MOVE R-NAME TO EU_KEY-NAME. "Program name for CUA
    MOVE 'D' TO EU_KEY-SPRSL. "CUA seems to want D as lang
    MOVE R-LANGUAGE TO EU_KEY-SPRSL. "Language "rel 2.2
    IMPORT STA FUN MEN MTX ACT BUT PFK SET LAST INC STX DOC "rel 2.2
    IMPORT STA STX FUN MEN MTX ACT BUT PFK SET LAST INC DOC "rel 3.0
    ATT FDN MDN SYM FIN "rel 3.0
    FROM DATABASE EUDB(CU) ID EU_KEY.
    IF SY-SUBRC NE 0. "No statuses
    EXIT.
    ENDIF.
    read titles in logged on language. If not present use
    language from TRDIR.
    CASE REL3.
    WHEN SPACE. "(rel 4)
    SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
    AND SPRSL = SY-LANGU.
    MOVE-CORRESPONDING RSMPTEXTS TO FTX.
    APPEND FTX.
    ENDSELECT.
    IF SY-SUBRC NE 0.
    SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
    AND SPRSL = R-LANGUAGE.
    MOVE-CORRESPONDING RSMPTEXTS TO FTX.
    APPEND FTX.
    ENDSELECT.
    ENDIF.
    DESCRIBE TABLE FTX LINES I.
    IF I > 0.
    MOVE '????FTXT' TO S-TXT.
    APPEND S.
    LOOP AT FTX.
    MOVE FTX TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    WHEN OTHERS.
    SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
    AND DDLANGUAGE EQ SY-LANGU.
    MOVE-CORRESPONDING TITLE TO TIT.
    APPEND TIT.
    ENDSELECT.
    IF SY-SUBRC NE 0.
    SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
    AND DDLANGUAGE EQ R-LANGUAGE.
    MOVE-CORRESPONDING TITLE TO TIT.
    APPEND TIT.
    ENDSELECT.
    ENDIF.
    ENDCASE.
    DESCRIBE TABLE STA LINES I.
    IF I > 0.
    MOVE '????STAT' TO S-TXT.
    APPEND S.
    LOOP AT STA.
    MOVE STA TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE FUN LINES I.
    IF I > 0.
    MOVE '????FUNC' TO S-TXT.
    APPEND S.
    LOOP AT FUN.
    MOVE FUN TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE MEN LINES I.
    IF I > 0.
    MOVE '????MEN1' TO S-TXT.
    APPEND S.
    LOOP AT MEN.
    MOVE MEN TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE MTX LINES I.
    IF I > 0.
    MOVE '????MTX1' TO S-TXT.
    APPEND S.
    LOOP AT MTX.
    MOVE MTX TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE ACT LINES I.
    IF I > 0.
    MOVE '????ACTN' TO S-TXT.
    APPEND S.
    LOOP AT ACT.
    MOVE ACT TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE BUT LINES I.
    IF I > 0.
    MOVE '????BUTN' TO S-TXT.
    APPEND S.
    LOOP AT BUT.
    MOVE BUT TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE PFK LINES I.
    IF I > 0.
    MOVE '????PFKY' TO S-TXT.
    APPEND S.
    LOOP AT PFK.
    MOVE PFK TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE SET LINES I.
    IF I > 0.
    MOVE '????SETS' TO S-TXT.
    APPEND S.
    LOOP AT SET.
    MOVE SET TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    IF LAST NE SPACE.
    MOVE '????LIST' TO S-TXT.
    APPEND S.
    MOVE LAST TO S-TXT.
    APPEND S.
    ENDIF.
    DESCRIBE TABLE INC LINES I.
    IF I > 0.
    MOVE '????INCL' TO S-TXT.
    APPEND S.
    LOOP AT INC.
    MOVE INC TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE STX LINES I.
    IF I > 0.
    MOVE '????STXT' TO S-TXT.
    APPEND S.
    LOOP AT STX.
    MOVE STX TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE DOC LINES I.
    IF I > 0.
    MOVE '????DOCN' TO S-TXT.
    APPEND S.
    LOOP AT DOC.
    MOVE DOC TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE TIT LINES I.
    IF I > 0.
    MOVE '????TITL' TO S-TXT.
    APPEND S.
    LOOP AT TIT.
    MOVE TIT TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    Next 5 tables are rel 3.0 specific (ATT, FDN, MDN, SYM, FIN)
    DESCRIBE TABLE ATT LINES I.
    IF I > 0.
    MOVE '????VATT' TO S-TXT.
    APPEND S.
    LOOP AT ATT.
    MOVE ATT TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE FDN LINES I.
    IF I > 0.
    MOVE '????VFDN' TO S-TXT.
    APPEND S.
    LOOP AT FDN.
    MOVE FDN TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE MDN LINES I.
    IF I > 0.
    MOVE '????VMDN' TO S-TXT.
    APPEND S.
    LOOP AT MDN.
    MOVE MDN TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE SYM LINES I.
    IF I > 0.
    MOVE '????VSYM' TO S-TXT.
    APPEND S.
    LOOP AT SYM.
    MOVE SYM TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    DESCRIBE TABLE FIN LINES I.
    IF I > 0.
    MOVE '????VFIN' TO S-TXT.
    APPEND S.
    LOOP AT FIN.
    MOVE FIN TO S-TXT.
    APPEND S.
    ENDLOOP.
    ENDIF.
    ENDFORM.
    / Upload Objects. */
    FORM UPLOAD_OBJECTS.
    PERFORM UPLOAD_EEE. "ABAP,texts,attr dynpro logic
    DESCRIBE TABLE E1 LINES I.
    IF I > 0. "Do dynpro components exist
    PERFORM UPLOAD_HHH. "dynpro header
    PERFORM UPLOAD_FFF. "dynpro fields.
    PERFORM RECONSTRUCT_DYNPROS. "load + gen dynpros
    ENDIF.
    ENDFORM.
    / Build table containing dynpro names and numbers */
    FORM BUILD_T.
    SELECT * FROM D020S WHERE PROG EQ R-NAME.
    T-NUMBER = D020S-DNUM.
    T-NAME = D020S-PROG.
    APPEND T.
    ENDSELECT.
    ENDFORM.
    / Split dynpros into constituent parts. */
    FORM UNLOAD_DYNPROS.
    MOVE 'Y' TO FIRST-TIME.
    LOOP AT T.
    REFRESH: F, E.
    CLEAR: H, F, E.
    PERFORM BUILD_HHH. "Dynpro Header
    PERFORM BUILD_FFF. "Dynpro Fields
    PERFORM BUILD_EEE_DYNP. "Dynpro Logic
    ENDLOOP.
    ENDFORM.
    / Header H length 284. */
    FORM BUILD_HHH.
    MOVE T-NAME TO DYNNAME(40). "rel 4.
    MOVE T-NUMBER TO DYNNAME+40(4). "rel 4.
    IMPORT DYNPRO H F E M ID DYNNAME.
    MOVE T-NAME TO H1-NAME.
    MOVE T-NUMBER TO H1-NUMBER.
    MOVE-CORRESPONDING H TO H1.
    APPEND H1.
    ENDFORM.
    / Fields D021S Len 87. */
    FORM BUILD_FFF.
    MOVE T-NAME TO F1-NAME.
    MOVE T-NUMBER TO F1-NUMBER.
    LOOP AT F.
    MOVE-CORRESPONDING F TO F1.
    APPEND F1.
    DELETE F.
    ENDLOOP.
    ENDFORM.
    / Dynpro Logic D022S E */
    FORM BUILD_EEE_DYNP.
    MOVE T-NAME TO E1-NAME.
    MOVE T-NUMBER TO E1-NUMBER.
    LOOP AT E.
    MOVE-CORRESPONDING E TO E1.
    APPEND E1.
    DELETE E.
    ENDLOOP.
    ENDFORM.
    / Unload Constituent parts of dynpro. */
    FORM UNLOAD_DYNPRO_COMPONENTS.
    MOVE '????LOGC' TO S-TXT.
    APPEND S.
    LOOP AT E1.
    MOVE E1 TO S-TXT.
    APPEND S.
    DELETE E1.
    ENDLOOP.
    FREE E1.
    LOOP AT T.
    MOVE 'N' TO FOUND.
    SELECT SINGLE * FROM D020T "use logged on language
    WHERE PROG EQ T-NAME
    AND DYNR EQ T-NUMBER
    AND LANG EQ SY-LANGU.
    IF SY-SUBRC NE 0. "try original language.
    SELECT SINGLE * FROM D020T
    WHERE PROG EQ T-NAME
    AND DYNR EQ T-NUMBER
    AND LANG EQ R-LANGUAGE.
    ENDIF.
    IF SY-SUBRC EQ 0.
    IF FOUND = 'N'.
    MOVE '????DTIT' TO S-TXT.
    APPEND S.
    MOVE 'Y' TO FOUND.
    ENDIF.
    MOVE T-NAME TO S-TXT.
    WRITE T-NUMBER TO S-TXT+8(4).
    WRITE D020T-DTXT TO S-TXT+12(60).
    APPEND S.
    ENDIF.
    MOVE 'N' TO FOUND.
    SELECT * FROM D021T
    WHERE PROG EQ T-NAME
    AND DYNR EQ T-NUMBER
    AND LANG EQ SY-LANGU. "logged on language
    IF FOUND = 'N'.
    MOVE '????DTXT' TO S-TXT.
    APPEND S.
    MOVE 'Y' TO FOUND.
    ENDIF.
    MOVE-CORRESPONDING D021T TO DTXT.
    MOVE DTXT TO S-TXT.
    APPEND S.
    ENDSELECT.
    CASE SY-SUBRC.
    WHEN 0.
    WHEN OTHERS. "try original language
    SELECT * FROM D021T
    WHERE PROG EQ T-NAME
    AND DYNR EQ T-NUMBER
    AND LANG EQ R-LANGUAGE.
    IF FOUND = 'N'.
    MOVE '????DTXT' TO S-TXT.
    APPEND S.
    MOVE 'Y' TO FOUND.
    ENDIF.
    MOVE-CORRESPONDING D021T TO DTXT.
    MOVE DTXT TO S-TXT.
    APPEND S.
    ENDSELECT.
    ENDCASE.
    ENDLOOP.
    ENDFORM.
    / Build the original dynpro component tables. */
    / Table H1 contains 1 entry for each dynpro. H1 contains */
    / the header for the dynpro prefixed by the program name */
    / and dynpro number. */
    / By looping round this table we can re-build the F */
    / (Fields) and E (Logic) components. By stripping off the */
    / program name and dynpro number the original tables are */
    / re-created. (Tables F1 and E1 also have a prefix of */
    / Program name and dynpro nr). */
    / After the original set of tables has been re-created we */
    / use R3 - SYSTEM-CALL (rel 2.2) to generate the screen */
    / and then get the next entry in table H1 to build the */
    / next screen. For releases 3.0 and higher use generate */
    / dynpro. */
    FORM RECONSTRUCT_DYNPROS.
    LOOP AT H1.
    CASE MAIN.
    WHEN 'Y'.
    if h1-name ne repid.
    IF H1-NAME NE R1-NAME.
    MOVE H1-NAME TO OLDNAME.
    ENDIF.
    ENDCASE.
    PERFORM RECONSTRUCT_F.
    PERFORM RECONSTRUCT_E.
    MOVE-CORRESPONDING H1 TO H.
    IF MAIN = 'Y'.
    move repid to h-prog.
    MOVE R1-NAME TO H-PROG.
    move repid to dynname.
    MOVE R1-NAME TO DYNNAME.
    ELSE.
    MOVE H1-NAME TO H-PROG.
    MOVE H1-NAME TO DYNNAME.
    ENDIF.
    MOVE H1-NUMBER TO H-DNUM.
    WRITE H1-NUMBER TO DYNNAME+40(4).
    EXPORT DYNPRO H F E M ID DYNNAME.
    SYSTEM-CALL GENERATE-SCREEN DYNNAME. "Up to rel 2.2
    GENERATE DYNPRO H F E M ID DYNNAME "R 3.0, 4.0, 4.5
    MESSAGE DYNPRO_MESSAGE
    LINE DYNPRO_LINE
    WORD DYNPRO_WORD.
    REFRESH: M, F, E.
    CLEAR: M, H, F, E.
    ENDLOOP.
    ENDFORM.
    / Re-build Fields table */
    FORM RECONSTRUCT_F.
    LOOP AT F1 WHERE NAME EQ H1-NAME AND
    NUMBER EQ H1-NUMBER.
    MOVE-CORRESPONDING F1 TO F.
    APPEND F.
    ENDLOOP.
    ENDFORM.
    / Re-build Logic table */
    FORM RECONSTRUCT_E.
    LOOP AT E1 WHERE NAME EQ H1-NAME AND
    NUMBER EQ H1-NUMBER.
    MOVE-CORRESPONDING E1 TO E.
    APPEND E.
    ENDLOOP.
    ENDFORM.
    / scan for included files (Upload) */
    FORM SCAN4-INCLUDES.
    IF FUNC = 'D'. "Downloads - whole table needs to be scanned
    LOOP AT S.
    PERFORM SEARCH-FUNC.
    ENDLOOP.
    ENDIF.
    IF FUNC = 'U'. "On upload scan line by line as we are re-building abap
    PERFORM SEARCH-FUNC.
    ENDIF.
    ENDFORM.
    / scan for text INCLUDE xxxxxxxx */
    / reject INCLUDE STRUCTURE as structure not a valid */
    / program name */
    FORM SEARCH-FUNC.
    CONDENSE S-TXT.
    SEARCH S-TXT FOR '.INCLUDE .'.
    CASE SY-SUBRC.
    WHEN 0.
    IF S-TXT+8(9) EQ 'STRUCTURE'
    OR S-TXT+8(9) EQ 'structure'
    OR S-TXT+8(6) EQ '<ICON>' "rel 3.0c 3.0d
    OR S-TXT+8(6) EQ '<icon>'
    OR S-TXT+8(6) EQ '<type>'
    OR S-TXT+8(6) EQ '<TYPE>'
    OR S-TXT+8(9) EQ '<methods>'
    OR S-TXT+8(9) EQ '<METHODS>'.
    EXIT.
    ENDIF.
    IF SY-FDPOS EQ 0. "INCLUDE must be in pos 1 (by reason of condense)
    PERFORM VALIDATE_INCLUDE.
    ELSE.
    EXIT.
    ENDIF.
    ENDCASE.
    ENDFORM.
    / Validate INCLUDES . */
    FORM VALIDATE_INCLUDE.
    SEARCH S-TXT FOR '...' STARTING AT 9 ENDING AT 39.
    CASE SY-SUBRC.
    WHEN 0.
    WHEN OTHERS.
    SEARCH S-TXT FOR '. .' STARTING AT 9 ENDING AT 38.
    IF SY-SUBRC NE 0.
    EXIT.
    ENDIF.
    ENDCASE.
    IX = SY-FDPOS.
    ASSIGN S-TXT+8(IX) TO <F>.
    Now check for Include Mask for example if include mask was set to
    Z* then only include programs whose first letter starts with a Z.
    1) get length of the INCLUDE program name. Must be less than or
    equal 40.
    2) Compare it with the Include mask.
    3) If Ok add include program name to include table
    clear i_include.
    move <f> to i_include-name.
    CLEAR I_INCL.
    SEARCH IMASK FOR '.*.'.
    IF SY-SUBRC = 0.
    CONDENSE IMASK.
    ENDIF.
    IF ( <F> CP IMASK OR IMASK = ' ' ).
    READ TABLE I_INCL WITH KEY = <F>.
    IF SY-SUBRC NE 0.
    MOVE <F> TO I_INCL-NAME.
    move 1 to i_include-count.
    collect i_include.
    APPEND I_INCL.
    ENDIF.
    ENDIF.
    ENDFORM.
    / Download table S. */
    FORM DOWNLOAD_DATA.
    CLEAR TXLINE.
    WRITE 'Downloading ' TO TXLINE.
    WRITE R1-NAME TO TXLINE+12.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
    PERCENTAGE = 0
    TEXT = TXLINE
    EXCEPTIONS
    OTHERS = 1.
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
    FILENAME = FN3
    FILETYPE = 'ASC'
    TABLES
    DATA_TAB = S.
    ENDFORM.
    / Download Binary files H1 */
    FORM DOWNLOAD_BIN_H1.
    DESCRIBE FIELD H1 LENGTH J.
    DESCRIBE TABLE H1 LINES I.
    NR_OF_BYTES = I * J.
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
    FILENAME = FN1
    FILETYPE = 'BIN'
    BIN_FILESIZE = NR_OF_BYTES
    IMPORTING
    FILELENGTH = FILESIZE
    TABLES
    DATA_TAB = H1.
    ENDFORM.
    / Download Binary files F1 */
    FORM DOWNLOAD_BIN_F1.
    DESCRIBE FIELD F1 LENGTH J.
    DESCRIBE TABLE F1 LINES I.
    NR_OF_BYTES = I * J.
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
    FILENAME = FN2
    FILETYPE = 'BIN'
    BIN_FILESIZE = NR_OF_BYTES
    IMPORTING
    FILELENGTH = FILESIZE
    TABLES
    DATA_TAB = F1.
    ENDFORM.
    / Upload data from file .EEE */
    FORM UPLOAD_EEE.
    CLEAR TXLINE.
    WRITE 'Uploading ' TO TXLINE.
    WRITE R1-NAME TO TXLINE+10.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
    PERCENTAGE = 0
    TEXT = TXLINE
    EXCEPTIONS
    OTHERS = 1.
    MOVE 'Y' TO FIRST-TIME.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
    FILENAME = FN3
    FILETYPE = 'ASC'
    IMPORTING
    FILELENGTH = NR_OF_BYTES
    TABLES
    DATA_TAB = S1.
    LOOP AT S1.
    IF S1-TXT(4) = '????'.
    MOVE S1-TXT(8) TO NEW-FUNC.
    IF FIRST-TIME = 'Y'.
    MOVE S1-TXT(8) TO OLD-FUNC.
    MOVE 'N' TO FIRST-TIME.
    ELSE.
    PERFORM STORE_COMPONENT.
    MOVE NEW-FUNC TO OLD-FUNC.
    ENDIF.
    ENDIF.
    IF S1-TXT(4) NE '????'.
    PERFORM REBUILD-COMPONENT.
    ENDIF.
    ENDLOOP.
    PERFORM STORE_COMPONENT. "last component still to be processed
    PERFORM REBUILD-CUA. "re-build CUA, statuses, pfk etc
    ENDFORM.
    / Upload Dynpro headers (HHH) and fields (FFF) */
    / titles and dynpro logic is contained in file .EEE */
    / and has already been processed. */
    FORM UPLOAD_HHH.
    CASE REL3.
    WHEN 'X'.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
    FILENAME = FN1
    FILETYPE = 'BIN'
    IMPORTING
    FILELENGTH = NR_OF_BYTES
    TABLES
    DATA_TAB = H2.
    LOOP AT H2.
    MOVE H2-CNAME TO H1-NAME.
    MOVE H2-CNUM TO H1-NUMBER.
    MOVE H2-NNAME TO H1-PROG.
    MOVE H2-NNUM TO H1-DNUM.
    MOVE H2-CTIM TO H1-TGEN.
    WRITE '19' TO H1-DGEN(2).
    WRITE H2-CDAT TO H1-DGEN+2(6).
    WRITE H2-FILL TO H1+88(39).
    APPEND H1.
    ENDLOOP.
    WHEN OTHERS.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
    FILENAME = FN1
    FILETYPE = 'BIN'
    IMPORTING
    FILELENGTH = NR_OF_BYTES
    TABLES
    DATA_TAB = H1.
    ENDCASE.
    LOOP AT H1.
    MOVE H1-NAME TO T-NAME.
    MOVE H1-NUMBER TO T-NUMBER.
    APPEND T.
    ENDLOOP.
    ENDFORM.
    / Upload Binary file F1 - Dynpro fields */
    FORM UPLOAD_FFF.
    CASE REL3.
    WHEN 'X'.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
    FILENAME = FN2
    FILETYPE = 'BIN'
    IMPORTING
    FILELENGTH = NR_OF_BYTES
    TABLES
    DATA_TAB = F2.
    LOOP AT F2.
    OLD_F1 = F2.
    APPEND OLD_F1.
    ENDLOOP.
    LOOP AT OLD_F1.
    MOVE-CORRESPONDING OLD_F1 TO F1.
    APPEND F1.
    ENDLOOP.
    WHEN OTHERS.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
    FILENAME = FN2
    FILETYPE = 'BIN'
    IMPORTING
    FILELENGTH = NR_OF_BYTES
    TABLES
    DATA_TAB = F1.
    ENDCASE.
    ENDFORM.
    / Re-construct data from file .EEE */
    FORM REBUILD-COMPONENT.
    CASE OLD-FUNC.
    WHEN '????LOGC'. "Dynpro LOGIC.
    CASE REL3.
    WHEN 'X'.
    SHIFT S1-TXT+8 RIGHT BY 32 PLACES.
    ENDCASE.
    MOVE S1-TXT TO E1.
    APPEND E1.
    / Load ABAP Source code, CUA, pfkeys etc to int tables */
    WHEN '????SRCE'.
    MOVE S1-TXT TO S-TXT.
    APPEND S.
    CASE INCLUDES. "Included file wanted
    WHEN 'Y'.
    PERFORM SCAN4-INCLUDES.
    ENDCASE.
    if restoring / uploading rel 3.1 or lower different cua tables
    are used. At generate CUA time these will be converted by the
    system to rel 4.0
    WHEN '????STAT'.
    CASE REL3.
    WHEN 'X'.
    MOVE S1-TXT TO OLD_STA.
    APPEND OLD_STA.
    WHEN SPACE.
    MOVE S1-TXT TO STA.
    APPEND STA.
    ENDCASE.
    MOVE 'Y' TO CUA-FLAG.
    WHEN '????FUNC'.
    CASE REL3.
    WHEN 'X'.
    MOVE S1-TXT TO OLD_FUN.
    APPEND OLD_FUN.
    WHEN SPACE.
    MOVE S1-TXT TO FUN.
    APPEND FUN.
    ENDCASE.
    MOVE 'Y' TO CUA-FLAG.
    WHEN '????MEN1'.
    CASE REL3.
    WHEN 'X'.
    MOVE S1-TXT TO OLD_MEN.
    APPEND OLD_MEN.
    WHEN SPACE.
    MOVE S1-TXT TO MEN.
    APPEND

  • How to use table maintenance view in module pool screen

    hi ,
    want to use table maintenance view in a module pool screen so that i can edit, insert, delete and update date in to the ztable.please help.

    You can simply call it via SM30.   Or you can call the table maintence view from any program(report or module pool) using a function module.
      call function 'VIEW_MAINTENANCE_CALL'
           exporting
                action                       = 'U'
                view_name                    = 'Z_Table_Name'
           exceptions
                client_reference             = 1
                foreign_lock                 = 2
                invalid_action               = 3
                no_clientindependent_auth    = 4
                no_database_function         = 5
                no_editor_function           = 6
                no_show_auth                 = 7
                no_tvdir_entry               = 8
                no_upd_auth                  = 9
                only_show_allowed            = 10
                system_failure               = 11
                unknown_field_in_dba_sellist = 12
                view_not_found               = 13
                others                       = 14.
    Regards,
    RIch Heilman

  • Icon display in Module pool screen not visible to some users

    Hi,
    I have added an icon in one of the module pool screen with dynamic quick info.  The page is rendered fine and the info is also displayed well for most users except some.  I can't figure out why the icon is not being displayed for some users.
    Do someone has any solution for this?
    Thanks,
    Sumith

    As I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons.  You can look for posting on "how to add an icon" to see a discussion on this topic.
    I found some useful info at:
    Create and Add Icons to table ICON?
    Message was edited by: Charles Folwell

  • How to handle The Back button on Module Pool screen

    Hi Gurus,
                  I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
    now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.

    hi,
    use AT EXIT-COMMAND with the module.
    eg. module user_command at exit command.
    then there will be no problem.

  • How to display image and data in module pool screen?

    Hi,
    I want to display image and relevant data besides the image in module pool screen, I am using docking container to display the image.
    Actually I am able to display image or data any one but not both.
    one more thing I want to display multiple images and their data.
    Please suggest some one if you have any idea.
    Regards,
    Dileep.

    You can try below way, I have used in report.
    DATA: gc_docking              TYPE REF TO cl_gui_docking_container, "#EC NEEDED  "Docking Container
           gc_split                 TYPE REF TO cl_gui_easy_splitter_container, "#EC NEEDED  "Splitter
           gc_top_container         TYPE REF TO cl_gui_container, "#EC NEEDED  "Top Container
           gc_bottom_container      TYPE REF TO cl_gui_container, "#EC NEEDED  "Bottom Container
          gc_document              TYPE REF TO cl_dd_document, "#EC NEEDED  "Document
           gc_events                TYPE REF TO lcl_event_class, "#EC NEEDED  " Local Event Class
           gc_grid                  TYPE REF TO cl_gui_alv_grid, "#EC NEEDED  " ALV Class
    " Creating Docking
    CREATE OBJECT gc_docking
           EXPORTING
             ratio = c_95.
         IF sy-subrc EQ 0.
    * Splitting the Docking container
           CREATE OBJECT gc_split
             EXPORTING
               parent        = gc_docking
               sash_position = c_10 "Position of Splitter Bar (in Percent)
               with_border   = c_1. "With Border = 1 Without Border = 0
         ENDIF.
    *   Placing the containers in the splitter
         gc_top_container = gc_split->top_left_container .
         gc_bottom_container = gc_split->bottom_right_container .
    *   Creating Grid
         CREATE OBJECT gc_grid
           EXPORTING
             i_parent = gc_bottom_container.
       ELSE.
    * Background job handling
         CREATE OBJECT gc_grid
           EXPORTING
             i_parent = gc_docking.
       ENDIF.
    *   Creating the document
       CREATE OBJECT gc_document
         EXPORTING
           style = 'ALV_GRID'.
    Regards,
    Sameer

  • How to get the Grand Total in Module pool Screen

    Hi Frds.
         How to get the Grand Total in Module pool Screen
    Example i have 10 different materials
    for each matarial has different moving . But in my case matarials is doesnt matter here
    10 material Moving Average price to do Frand total and display in one column...
    Please Help me out Frds.
    Regards,
    Kabil

    Hi
    You need to calculate the total in a module of PAI (or PBO) event:
    PROCESS PAI.
       LOOP.....
       ENDLOOP.
      MODULE CALCULATE_TOTAL.
      MODULE CALCULATE_TOTAL.
        GRAND_TOTAL = 0.
         LOOP AT ITAB,
            GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
        ENDLOOP.
    ENDMODULE.
    In this way the grand total will be calculated as soon as the user presses enter or another command.
    You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

  • Assigning 2 fields of same table in Module pool screen

    Hi,
    I want to assign similar fields of table in module pool screen.
    In one case i directly use the tablename-fieldname and in other case when i try doing the same i get error. I know that this is not possible.
    Is there any way to get around this. The field i am referring to is attached to a custom domain which is having defined fields. In the second assignment i need to retreive the values of the domain and display it in dropdown mode so that the users are able to select it.
    Regards,
    Imran

    The domain only attached with this field?check the same domain attached to any other field and insert that field in the screen.
    shibu
    reward if helpful

  • How to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?

    hi frnds.
    My problem is in module pool screen how to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?And how to do GUI STATUS and GUI TITLE? IN SE80.
      ITS URGENT.POINTS WILL BE REWADED.THANKS  IN ADVANCE.

    Hi,
    Go through this thread.
    [expand and collapse|expand and collapse]
    Cheers,
    Simha.

  • How to retain leading zeros in module pool screen

    Hi experts,
    I have a ztable field of type NUMC4 being displayed on a module pool screen, the value in the field is '0001', but on the screen it displays value as '1' (without leading zeros), When I save the record, Even in the databse it stores as '1'.
    But I have checked in debugging the field always contains '0001' in the program execution and I have also used 'CONVERSION_EXIT_ALPHA_INPUT' in the PBO but no use.
    Pls suggest.
    Thanks,
    Deepak

    Check the screen attributes for the field. There is an option to show leading zeroes.
    edit.
    And how did you see it was stored a 1 and not 0001? Using SE16N? Mind you: with SE16N conversion-exits are executed automatically thus showing 0001 as 1.
    To make sure: double click on the record in SE16N and look if it's still 1 and not 0001.

  • How to insert tabstrip control in module pool screen painter

    Hi all!
    plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

    To insert tabstrip just open layout of screen and press on the tabstrip button there .
    Use this souce code further to activate it .
    CONTROLS tabstrip TYPE TABSTRIP.
    DATA: okcode TYPE sy-ucomm,
    dynnr TYPE sy-dynnr,
    flag type flag,
    active like tabstrip-activetab .
    call SCREEN 100.
    *& Module USER_COMMAND_0100 INPUT
    text
    MODULE USER_COMMAND_0100 INPUT.
    data: lv_okcode type syucomm.
    lv_okcode = okcode.
    clear okcode.
    case lv_okcode.
    WHEN 'TAB1'.
    dynnr = '0110'.
    WHEN 'TAB2'.
    dynnr = '0120'.
    WHEN 'TAB3'.
    dynnr = '0130'.
    WHEN 'TAB4'.
    dynnr = '0140'.
    WHEN 'TAB5'.
    "check authorization, if authorization fails
    flag = 'X'. "set the global flag
    active = 'TAB1'. "store active tab in global variable
    dynnr = '0110'. "set the screen number
    WHEN 'BACK' or 'EXIT'.
    leave program.
    ENDCASE.
    IF lv_okcode(3) = 'TAB'.
    tabstrip-activetab = lv_okcode.
    ENDIF.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    *& Module STATUS_0100 OUTPUT
    text
    MODULE STATUS_0100 OUTPUT.
    SET PF-STATUS 'MAIN'.
    SET TITLEBAR 'xxx'.
    IF tabstrip-activetab IS INITIAL OR
    dynnr IS INITIAL.
    tabstrip-activetab = 'TAB1'.
    dynnr = '0110'.
    ENDIF.
    "set the activetab explicilty here
    if flag eq 'X'. "from authorization failure
    tabstrip-activetab = active. "'TAB1'
    clear flag.
    endif.
    ENDMODULE. " STATUS_0100 OUTPUT

  • How to add logo in module pool screen

    Hi Expert,
    I need to display company logo in the module pool screen
    how this can be added ?
    Regards
    Bikas

    Hi,
    create a custom control called 'CUSTOM_CONTROL'
    CONSTANTS: CNTL_TRUE  TYPE I VALUE 1,
          CNTL_FALSE type i value 0.
    data:h_picture       type ref to cl_gui_picture,
         h_pic_container type ref to cl_gui_custom_container.
    data: graphic_url(255),
          graphic_refresh(1),
          g_result like cntl_true.
    data: begin of graphic_table occurs 0,
            line(255) type x,
          end of graphic_table.
    data: graphic_size type i.
    data: g_stxbmaps type STXBITMAPS,
          l_bytecnt  type i,
          l_content   TYPE  standard table of bapiconten initial size 0.
    g_stxbmaps-tdobject = 'GRAPHICS'.
    g_stxbmaps-tdname = 'ENJOY'.
    g_stxbmaps-tdid = 'BMAP'.
    g_stxbmaps-tdbtype = 'BMON'. 
    call function 'SAPSCRIPT_GET_GRAPHIC_BDS'
         exporting
              i_object       = g_stxbmaps-tdobject
              i_name         = g_stxbmaps-tdname
              i_id           = g_stxbmaps-tdid
              i_btype        = g_stxbmaps-tdbtype
         importing
              e_bytecount    = l_bytecnt
         tables
              content        = l_content
         exceptions
              not_found      = 1
              bds_get_failed = 2
              bds_no_content = 3
              others         = 4.
    call function 'SAPSCRIPT_CONVERT_BITMAP'
         exporting
              old_format               = 'BDS'
              new_format               = 'BMP'
              bitmap_file_bytecount_in = l_bytecnt
         importing
              bitmap_file_bytecount  = graphic_size
         tables
              bds_bitmap_file        = l_content
              bitmap_file            = graphic_table
         exceptions
              others                 = 1.
    call function 'DP_CREATE_URL'
         exporting
            type                 = 'image'           
            subtype              = cndp_sap_tab_unknown
            size                 = graphic_size
            lifetime             = cndp_lifetime_transaction
         tables
            data                 = graphic_table
         changing
            url                  = graphic_url
         exceptions
            others               = 4 .
    create object h_pic_container
           exporting container_name =  'CUSTOM_CONTROL'.
    create object h_picture exporting parent = h_pic_container.
    call method h_picture->set_display_mode
         exporting
              display_mode = cl_gui_picture=>display_mode_normal.
    call method h_picture->load_picture_from_url
         exporting url    = graphic_url
         importing result = g_result.
    or you can check the program RSDEMO_CUSTOM_CONTROL
    check link :
    How to insert Image on Screen
    thanks
    Parvathi

Maybe you are looking for

  • Thinkstation D20 Sleep Crash - Blinks for two seconds and then powers off entirely.

    Hi there. Here's the scoop.  I have a Lenovo D20, 12 core, 64gb ram, etc. The box is perfectly fine.  I've reinstalled windows and i'm missing a very important install file... There was a Microsoft Hotfix to fix a Sleep crash when the system attempte

  • Macbook Pro Retina "broken" screen loose

    My MBP Retina screen i loose in the left corner, when i'm opening the computer its not like a flow but just like when you are changing gear on your cycle. I don't know what i shall do?

  • Un reconciled transaction report

    Hi all, When we run BRS report we will get reconciled transaction and Unreconciled transactions report Under Unreconciled transaction we will get a headings and values as follows Open in Book after dates       xxxxxx                                  

  • Variable scope issue - EWS

    Hi everyone, So I have a funny issue. From line 8 to line 37 I declare a set of variables, most of them with null values. Then I call a function: SetupEWSAndFolder (line 88) which sets a lot of these variables. Once the function exits, the variables

  • Socket communication error in OBIEE 10g.

    Hi I have below error in nqserver log by which i am unable to connect admin tool and presentation service. I am using OBIEE 10g. [nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call